package/l2tpd/files/l2tpd.conf

   1 ;
   2 ; This is a minimal sample l2tpd configuration file for use
   3 ; with L2TP over IPsec.
   4 ;
   5 ; The idea is to provide an L2TP daemon to which remote Windows L2TP/IPsec
   6 ; clients connect. In this example, the internal (protected) network
   7 ; is 192.168.1.0/24.  A special IP range within this network is reserved
   8 ; for the remote clients: 192.168.1.128/25
   9 ; (i.e. 192.168.1.128 ... 192.168.1.254)
  10 ;
  11 ; The listen-addr parameter can be used if you want to bind the L2TP daemon
  12 ; to a specific IP address instead of to all interfaces. For instance,
  13 ; you could bind it to the interface of the internal LAN (e.g. 192.168.1.98
  14 ; in the example below). Yet another IP address (local ip, e.g. 192.168.1.99)
  15 ; will be used by l2tpd as its address on pppX interfaces.
  16
  17 [global]
  18 ; listen-addr = 192.168.1.98
  19
  20 [lns default]
  21 ip range = 192.168.1.128-192.168.1.254
  22 local ip = 192.168.1.99
  23 require chap = yes
  24 refuse pap = yes
  25 require authentication = yes
  26 name = LinuxVPNserver
  27 ppp debug = yes
  28 pppoptfile = /etc/ppp/options.l2tpd
  29 length bit = yes