generic: ar8216: use ar8216_read_port_link to get the CPU port link parameters
[openwrt.git] / target / linux / ar71xx / patches-3.3 / 403-mtd_fix_cfi_cmdset_0002_status_check.patch
1 --- a/drivers/mtd/chips/cfi_cmdset_0002.c
2 +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
3 @@ -1214,8 +1214,8 @@ static int __xipram do_write_oneword(str
4 break;
5 }
6
7 - if (chip_ready(map, adr))
8 - break;
9 + if (chip_good(map, adr, datum))
10 + goto enable_xip;
11
12 /* Latency issues. Drop the lock, wait a while and retry */
13 UDELAY(map, chip, adr, 1);
14 @@ -1231,6 +1231,8 @@ static int __xipram do_write_oneword(str
15
16 ret = -EIO;
17 }
18 +
19 + enable_xip:
20 xip_enable(map, chip, adr);
21 op_done:
22 chip->state = FL_READY;
23 @@ -1563,7 +1565,6 @@ static int cfi_amdstd_write_buffers(stru
24 return 0;
25 }
26
27 -
28 /*
29 * Handle devices with one erase region, that only implement
30 * the chip erase command.
31 @@ -1627,8 +1628,8 @@ static int __xipram do_erase_chip(struct
32 chip->erase_suspended = 0;
33 }
34
35 - if (chip_ready(map, adr))
36 - break;
37 + if (chip_good(map, adr, map_word_ff(map)))
38 + goto op_done;
39
40 if (time_after(jiffies, timeo)) {
41 printk(KERN_WARNING "MTD %s(): software timeout\n",
42 @@ -1648,6 +1649,7 @@ static int __xipram do_erase_chip(struct
43 ret = -EIO;
44 }
45
46 + op_done:
47 chip->state = FL_READY;
48 xip_enable(map, chip, adr);
49 put_chip(map, chip, adr);
50 @@ -1715,9 +1717,9 @@ static int __xipram do_erase_oneblock(st
51 chip->erase_suspended = 0;
52 }
53
54 - if (chip_ready(map, adr)) {
55 + if (chip_good(map, adr, map_word_ff(map))) {
56 xip_enable(map, chip, adr);
57 - break;
58 + goto op_done;
59 }
60
61 if (time_after(jiffies, timeo)) {
62 @@ -1739,6 +1741,7 @@ static int __xipram do_erase_oneblock(st
63 ret = -EIO;
64 }
65
66 + op_done:
67 chip->state = FL_READY;
68 put_chip(map, chip, adr);
69 mutex_unlock(&chip->mutex);
This page took 0.052117 seconds and 5 git commands to generate.