target/linux/brcm63xx/image/Makefile

   1 #
   2 # Copyright (C) 2006-2011 OpenWrt.org
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7 include $(TOPDIR)/rules.mk
   8 include $(INCLUDE_DIR)/image.mk
   9
  10 LOADADDR = 0x80010000           # RAM start + 16M
  11 KERNEL_ENTRY = $(LOADADDR)      # Newer kernels add a jmp to the kernel_entry at the start of the binary
  12 RAMSIZE = 0x01000000            # 64MB
  13
  14 LOADER_MAKEOPTS= \
  15                 KDIR=$(KDIR) \
  16                 LOADADDR=$(LOADADDR) \
  17                 KERNEL_ENTRY=$(KERNEL_ENTRY) \
  18                 RAMSIZE=$(RAMSIZE)
  19
  20 define trxalign/jffs2-128k
  21 -a 0x20000
  22 endef
  23 define trxalign/jffs2-64k
  24 -a 0x10000
  25 endef
  26 define trxalign/squashfs
  27 -a 1024
  28 endef
  29
  30 define Image/LimitName16
  31 $(shell expr substr "$(1)" 1 16)
  32 endef
  33
  34 define Image/Build/CFE
  35         # Generate the tagged image
  36         $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
  37                 --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
  38                 --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
  39                 --load-addr $(LOADADDR) --rsa-signature "$(5)" \
  40                 --info1 "-$(call Image/LimitName16,$(4))" --info2 $(1) \
  41                 $(6) $(7) $(8) $(9)
  42 endef
  43
  44 define Image/Build/CFEFIXUP
  45         # Generate the tagged image
  46         $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
  47                 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
  48                 --boardid $(2) --chipid $(4) --entry $(KERNEL_ENTRY) \
  49                 --load-addr $(LOADADDR) --rsa-signature "$(6)" \
  50                 --info1 "+$(call Image/LimitName16,$(3))" --info2 $(1) \
  51                 $(7) $(8) $(9) $(10)
  52 endef
  53
  54 define Image/Build/CFEHW553
  55         # Generate the tagged image
  56         $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
  57                 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
  58                 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
  59                 --load-addr $(LOADADDR) --tag-version 7 \
  60                 --block-size 0x20000 --image-offset $(4)
  61 endef
  62
  63 define Image/Build/CFEAGPF
  64         # Generate the tagged image
  65         $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
  66                 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
  67                 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
  68                 --load-addr $(LOADADDR) --tag-version 8 \
  69                 --signature2 IMAGE --block-size 0x20000 \
  70                 --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
  71 endef
  72
  73 define Image/Build/RG100A
  74         # Generate the tagged image
  75         $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
  76                 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
  77                 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
  78                 --load-addr $(LOADADDR) --block-size 0x20000 \
  79                 --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
  80 endef
  81
  82 define Image/Build/RedBoot
  83         cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
  84         gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
  85         $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
  86         dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
  87         dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
  88 endef
  89
  90 define Image/Build/SPW303V
  91         # Generate the tagged image
  92         $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
  93                 --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
  94                 --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
  95                 --load-addr $(LOADADDR) --rsa-signature "$(5)" \
  96                 $(6) $(7) $(8) $(9)
  97         # Fix up header
  98         $(STAGING_DIR_HOST)/bin/spw303v -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
  99                 -o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin
 100         $(STAGING_DIR_HOST)/bin/xorimage -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin \
 101                 -o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-factory.bin
 102         rm -f $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp
 103 endef
 104
 105 define Image/Build/CFEOLD
 106         $(TOPDIR)/scripts/brcmImage.pl -t -p    \
 107                 -b $(2) -c $(3)                 \
 108                 -k $(KDIR)/vmlinux.lzma.cfe     \
 109                 -r $(KDIR)/root.$(1)            \
 110                 -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
 111 endef
 112
 113 define Build/Clean
 114         $(MAKE) -C lzma-loader clean
 115 endef
 116
 117 define Image/Prepare
 118         # Standard LZMA kernel
 119         cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
 120
 121         # CFE is a LZMA nazi! It took me hours to find out the parameters!
 122         # Also I think lzma has a bug cause it generates different output depending on
 123         # if you use stdin / stdout or not. Use files instead of stdio here, cause
 124         # otherwise CFE will complain and not boot the image.
 125         $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
 126
 127         # Strip out the length, CFE doesn't like this
 128         dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
 129         dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
 130         rm -f $(KDIR)/vmlinux.lzma.tmp
 131
 132         # Build the LZMA loader
 133         rm -f $(KDIR)/loader.gz
 134         $(MAKE) -C lzma-loader \
 135                 BUILD_DIR="$(KDIR)" \
 136                 TARGET="$(KDIR)" \
 137                 clean install
 138
 139         echo -ne "\\x00" >> $(KDIR)/loader.gz
 140         rm -f $(KDIR)/fs_mark
 141         touch $(KDIR)/fs_mark
 142         $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
 143 endef
 144
 145 define Image/Build
 146         dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
 147         # Various routers
 148         $(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
 149         $(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5)
 150         $(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-rev,OpenWRT-$(REVISION))
 151         $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-generic,,)
 152         $(call Image/Build/CFE,$(1),96348R,6348,96348R-generic,,)
 153         $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,--layoutver 5)
 154         $(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,)
 155         $(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
 156         $(call Image/Build/CFE,$(1),96348GW-11,6348,96348GW-11-generic)
 157         $(call Image/Build/CFE,$(1),96348GW-10,6348,96348GW-10-generic)
 158         $(call Image/Build/CFE,$(1),96358VW,6358,96358VW-generic)
 159         $(call Image/Build/CFE,$(1),96358VW2,6358,96358VW2-generic)
 160
 161         # BT Voyager V210_BTR
 162         $(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
 163         # BT Voyager V210_ROI, V210_WB
 164         $(call Image/Build/CFE,$(1),V210,6348,BTV210_ROI_WB,,--layoutver 5)
 165         # BT Voyager V2091_BTR
 166         $(call Image/Build/CFE,$(1),V2091_BB,6348,BTV2091_BTR,,--layoutver 5)
 167         # BT Voyager V2091_ROI, V2091_WB
 168         $(call Image/Build/CFE,$(1),V2091,6348,BTV2091_ROI_WB,,--layoutver 5)
 169         # BT Voyager V220V, V220V_MGCP_BTR
 170         $(call Image/Build/CFE,$(1),RTA1052V,6348,BTV220V_MGCP_BTR,,--layoutver 5)
 171         # BT Voyager V2110, V2110_AA, V2110_ROI
 172         $(call Image/Build/CFE,$(1),V2110,6348,BTV2110,,--layoutver 5)
 173         # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
 174         $(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,--layoutver 5)
 175         # RTA1025W_16 (numerous routers)
 176         $(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,--layoutver 5)
 177         # RTA1320_16M (numerous routers)
 178         $(call Image/Build/CFE,$(1),RTA1320_16M,6338,RTA1320_16M,,--layoutver 5)
 179         # Tecom GW6000
 180         $(call Image/Build/CFEFIXUP,$(1),96348GW,GW6000,6348,GW6000)
 181         # Tecom GW6200
 182         $(call Image/Build/CFEFIXUP,$(1),96348GW,GW6200,6348,GW6200,$(shell printf '\x99'))
 183         # Neufbox4
 184         $(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
 185         # Comtrend 536, 5621
 186         $(call Image/Build/CFEFIXUP,$(1),96348GW-11,CT536_CT5621,6348,CT536_CT5621)
 187         # Davolink DV201AMR
 188         $(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
 189         # USR 9108
 190         $(call Image/Build/CFE,$(1),96348GW-A,6348,USR9108)
 191         # NetGear DG834GT, DG834PN
 192         $(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN)
 193         # Belkin f5d7633
 194         $(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633)
 195         # D-Link DSL-2640B, rev B2
 196         $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B-B2)
 197         # D-Link DSL-2650U
 198         $(call Image/Build/CFE,$(1),96358VW2,6358,DSL2650U)
 199         # D-Link DSL-2740B/DSL-2741B, rev C2
 200         $(call Image/Build/CFEFIXUP,$(1),96358GW,AW4139,6358,DSL274XB-C2)
 201         # D-Link DSL-2740B/DSL-2741B, rev C3
 202         $(call Image/Build/CFE,$(1),AW4139,6358,DSL274XB-C3)
 203         # D-Link DVA-G3810BN/TL
 204         $(call Image/Build/CFE,$(1),96358GW,6358,DVAG3810BN)
 205
 206         # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
 207         $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
 208         # TP-Link 8900GB
 209         $(call Image/Build/CFE,$(1),96348GW-11,6348,TD8900GB,$(shell printf 'PRID\x89\x10\x00\x02'))
 210
 211         # Sagem F@ST2404
 212         $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
 213         $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
 214         # Inventel Livebox
 215         $(call Image/Build/RedBoot,livebox)
 216         # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
 217         $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W-cfe)
 218         $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W)
 219         # Pirelli A226G
 220         $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G-cfe)
 221         $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G)
 222
 223         # Pirelli A226M
 224         $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M-cfe)
 225         $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M)
 226
 227         # RG100A,DB120 etc.
 228         $(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
 229
 230         # Telsey CPVA642-type (e.g. CPA-ZNTE60T)
 231         $(call Image/Build/CFE,$(1),CPVA642,6358,CPA-ZNTE60T,,--signature "Telsey Tlc",--signature2 "99.99.999",--second-image-flag "0")
 232
 233         # T-Com Speedport W 500V
 234         $(call Image/Build/CFEFIXUP,$(1),96348GW,SPW500V,6348,SPW500V)
 235
 236         #HW553
 237         $(call Image/Build/CFEHW553,$(1),HW553,6358,0x20000,HW553)
 238
 239         # T-Com Speedport W 303V Typ B
 240         $(call Image/Build/SPW303V,$(1),96358-502V,6358,SPW303V)
 241 endef
 242
 243 $(eval $(call BuildImage))