ar71xx: ag71xx: use the generic get_port_link implementation

[openwrt.git] / target / linux / ramips / files / drivers / usb / dwc_otg / dwc_otg_cil.c

/* ==========================================================================
 * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
 * $Revision: 1.7 $
 * $Date: 2008-12-22 11:43:05 $
 * $Change: 1117667 $
 *
 * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
 * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
 * otherwise expressly agreed to in writing between Synopsys and you.
 *
 * The Software IS NOT an item of Licensed Software or Licensed Product under
 * any End User Software License Agreement or Agreement for Licensed Product
 * with Synopsys or any supplement thereto. You are permitted to use and
 * redistribute this Software in source and binary forms, with or without
 * modification, provided that redistributions of source code must retain this
 * notice. You may not view, use, disclose, copy or distribute this file or
 * any information contained herein except pursuant to this license grant from
 * Synopsys. If you do not agree with this notice, including the disclaimer
 * below, then you are not authorized to use the Software.
 *
 * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
 * DAMAGE.
 * ========================================================================== */

/** @file
 *
 * The Core Interface Layer provides basic services for accessing and
 * managing the DWC_otg hardware. These services are used by both the
 * Host Controller Driver and the Peripheral Controller Driver.
 *
 * The CIL manages the memory map for the core so that the HCD and PCD
 * don't have to do this separately. It also handles basic tasks like
 * reading/writing the registers and data FIFOs in the controller.
 * Some of the data access functions provide encapsulation of several
 * operations required to perform a task, such as writing multiple
 * registers to start a transfer. Finally, the CIL performs basic
 * services that are not specific to either the host or device modes
 * of operation. These services include management of the OTG Host
 * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
 * Diagnostic API is also provided to allow testing of the controller
 * hardware.
 *
 * The Core Interface Layer has the following requirements:
 * - Provides basic controller operations.
 * - Minimal use of OS services.
 * - The OS services used will be abstracted by using inline functions
 *       or macros.
 *
 */
#include <asm/unaligned.h>
#include <linux/dma-mapping.h>
#ifdef DEBUG
#include <linux/jiffies.h>
#endif

#include "linux/dwc_otg_plat.h"
#include "dwc_otg_regs.h"
#include "dwc_otg_cil.h"

/* Included only to access hc->qh for non-dword buffer handling
 * TODO: account it
 */
#include "dwc_otg_hcd.h"

/**
 * This function is called to initialize the DWC_otg CSR data
 * structures.  The register addresses in the device and host
 * structures are initialized from the base address supplied by the
 * caller.      The calling function must make the OS calls to get the
 * base address of the DWC_otg controller registers.  The core_params
 * argument holds the parameters that specify how the core should be
 * configured.
 *
 * @param[in] reg_base_addr Base address of DWC_otg core registers
 * @param[in] core_params Pointer to the core configuration parameters
 *
 */
dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *reg_base_addr,
                                        dwc_otg_core_params_t *core_params)
{
        dwc_otg_core_if_t *core_if = 0;
        dwc_otg_dev_if_t *dev_if = 0;
        dwc_otg_host_if_t *host_if = 0;
        uint8_t *reg_base = (uint8_t *)reg_base_addr;
        int i = 0;

        DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, reg_base_addr, core_params);

        core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL);

        if (core_if == 0) {
                DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
                return 0;
        }

        memset(core_if, 0, sizeof(dwc_otg_core_if_t));

        core_if->core_params = core_params;
        core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;

        /*
         * Allocate the Device Mode structures.
         */
        dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL);

        if (dev_if == 0) {
                DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
                kfree(core_if);
                return 0;
        }

        dev_if->dev_global_regs =
                        (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);

        for (i=0; i<MAX_EPS_CHANNELS; i++)
        {
                dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
                                (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
                                 (i * DWC_EP_REG_OFFSET));

                dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
                                (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
                                 (i * DWC_EP_REG_OFFSET));
                DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
                                        i, &dev_if->in_ep_regs[i]->diepctl);
                DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
                                        i, &dev_if->out_ep_regs[i]->doepctl);
        }

        dev_if->speed = 0; // unknown

        core_if->dev_if = dev_if;

        /*
         * Allocate the Host Mode structures.
         */
        host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL);

        if (host_if == 0) {
                DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
                kfree(dev_if);
                kfree(core_if);
                return 0;
        }

        host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
                        (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);

        host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);

        for (i=0; i<MAX_EPS_CHANNELS; i++)
        {
                host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
                                (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
                                 (i * DWC_OTG_CHAN_REGS_OFFSET));
                DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
                                        i, &host_if->hc_regs[i]->hcchar);
        }

        host_if->num_host_channels = MAX_EPS_CHANNELS;
        core_if->host_if = host_if;

        for (i=0; i<MAX_EPS_CHANNELS; i++)
        {
                core_if->data_fifo[i] =
                                (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
                                                         (i * DWC_OTG_DATA_FIFO_SIZE));
                DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
                                        i, (unsigned)core_if->data_fifo[i]);
        }

        core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);

        /*
         * Store the contents of the hardware configuration registers here for
         * easy access later.
         */
        core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
        core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
        core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
        core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);

        DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
        DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
        DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
        DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);

        core_if->hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
        core_if->dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);

        DWC_DEBUGPL(DBG_CILV,"hcfg=%08x\n",core_if->hcfg.d32);
        DWC_DEBUGPL(DBG_CILV,"dcfg=%08x\n",core_if->dcfg.d32);

        DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
        DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
        DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
        DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
        DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
        DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
        DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);

        DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
        DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);

        /*
         * Set the SRP sucess bit for FS-I2c
         */
        core_if->srp_success = 0;
        core_if->srp_timer_started = 0;


        /*
         * Create new workqueue and init works
         */
        core_if->wq_otg = create_singlethread_workqueue("dwc_otg");
        if(core_if->wq_otg == 0) {
                DWC_DEBUGPL(DBG_CIL, "Creation of wq_otg failed\n");
                kfree(host_if);
                kfree(dev_if);
                kfree(core_if);
                return 0 * HZ;
        }



#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)

        INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if);
        INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if);

#else

        INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
        INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);

#endif
        return core_if;
}

/**
 * This function frees the structures allocated by dwc_otg_cil_init().
 *
 * @param[in] core_if The core interface pointer returned from
 * dwc_otg_cil_init().
 *
 */
void dwc_otg_cil_remove(dwc_otg_core_if_t *core_if)
{
        /* Disable all interrupts */
        dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0);
        dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0);

        if (core_if->wq_otg) {
                destroy_workqueue(core_if->wq_otg);
        }
        if (core_if->dev_if) {
                kfree(core_if->dev_if);
        }
        if (core_if->host_if) {
                kfree(core_if->host_if);
        }
        kfree(core_if);
}

/**
 * This function enables the controller's Global Interrupt in the AHB Config
 * register.
 *
 * @param[in] core_if Programming view of DWC_otg controller.
 */
void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t *core_if)
{
        gahbcfg_data_t ahbcfg = { .d32 = 0};
        ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
        dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
}

/**
 * This function disables the controller's Global Interrupt in the AHB Config
 * register.
 *
 * @param[in] core_if Programming view of DWC_otg controller.
 */
void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t *core_if)
{
        gahbcfg_data_t ahbcfg = { .d32 = 0};
        ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
        dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
}

/**
 * This function initializes the commmon interrupts, used in both
 * device and host modes.
 *
 * @param[in] core_if Programming view of the DWC_otg controller
 *
 */
static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *core_if)
{
        dwc_otg_core_global_regs_t *global_regs =
                        core_if->core_global_regs;
        gintmsk_data_t intr_mask = { .d32 = 0};

        /* Clear any pending OTG Interrupts */
        dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF);

        /* Clear any pending interrupts */
        dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);

        /*
         * Enable the interrupts in the GINTMSK.
         */
        intr_mask.b.modemismatch = 1;
        intr_mask.b.otgintr = 1;

        if (!core_if->dma_enable) {
                intr_mask.b.rxstsqlvl = 1;
        }

        intr_mask.b.conidstschng = 1;
        intr_mask.b.wkupintr = 1;
        intr_mask.b.disconnect = 1;
        intr_mask.b.usbsuspend = 1;
        intr_mask.b.sessreqintr = 1;
        dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32);
}

/**
 * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
 * type.
 */
static void init_fslspclksel(dwc_otg_core_if_t *core_if)
{
        uint32_t        val;
        hcfg_data_t             hcfg;

        if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
                 (core_if->hwcfg2.b.fs_phy_type == 1) &&
                 (core_if->core_params->ulpi_fs_ls)) ||
                (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
                /* Full speed PHY */
                val = DWC_HCFG_48_MHZ;
        }
        else {
                /* High speed PHY running at full speed or high speed */
                val = DWC_HCFG_30_60_MHZ;
        }

        DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
        hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
        hcfg.b.fslspclksel = val;
        dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
}

/**
 * Initializes the DevSpd field of the DCFG register depending on the PHY type
 * and the enumeration speed of the device.
 */
static void init_devspd(dwc_otg_core_if_t *core_if)
{
        uint32_t        val;
        dcfg_data_t             dcfg;

        if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
                 (core_if->hwcfg2.b.fs_phy_type == 1) &&
                 (core_if->core_params->ulpi_fs_ls)) ||
                (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
                /* Full speed PHY */
                val = 0x3;
        }
        else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
                /* High speed PHY running at full speed */
                val = 0x1;
        }
        else {
                /* High speed PHY running at high speed */
                val = 0x0;
        }

        DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);

        dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
        dcfg.b.devspd = val;
        dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
}

/**
 * This function calculates the number of IN EPS
 * using GHWCFG1 and GHWCFG2 registers values
 *
 * @param core_if Programming view of the DWC_otg controller
 */
static uint32_t calc_num_in_eps(dwc_otg_core_if_t *core_if)
{
        uint32_t num_in_eps = 0;
        uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
        uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
        uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
        int i;


        for(i = 0; i < num_eps; ++i)
        {
                if(!(hwcfg1 & 0x1))
                        num_in_eps++;

                hwcfg1 >>= 2;
        }

        if(core_if->hwcfg4.b.ded_fifo_en) {
                num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
        }

        return num_in_eps;
}


/**
 * This function calculates the number of OUT EPS
 * using GHWCFG1 and GHWCFG2 registers values
 *
 * @param core_if Programming view of the DWC_otg controller
 */
static uint32_t calc_num_out_eps(dwc_otg_core_if_t *core_if)
{
        uint32_t num_out_eps = 0;
        uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
        uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
        int i;

        for(i = 0; i < num_eps; ++i)
        {
                if(!(hwcfg1 & 0x2))
                        num_out_eps++;

                hwcfg1 >>= 2;
        }
        return num_out_eps;
}
/**
 * This function initializes the DWC_otg controller registers and
 * prepares the core for device mode or host mode operation.
 *
 * @param core_if Programming view of the DWC_otg controller
 *
 */
void dwc_otg_core_init(dwc_otg_core_if_t *core_if)
{
        int i = 0;
        dwc_otg_core_global_regs_t *global_regs =
                        core_if->core_global_regs;
        dwc_otg_dev_if_t *dev_if = core_if->dev_if;
        gahbcfg_data_t ahbcfg = { .d32 = 0 };
        gusbcfg_data_t usbcfg = { .d32 = 0 };
        gi2cctl_data_t i2cctl = { .d32 = 0 };

        DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if);

        /* Common Initialization */

        usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);

//      usbcfg.b.tx_end_delay = 1;
        /* Program the ULPI External VBUS bit if needed */
        usbcfg.b.ulpi_ext_vbus_drv =
                (core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;

        /* Set external TS Dline pulsing */
        usbcfg.b.term_sel_dl_pulse = (core_if->core_params->ts_dline == 1) ? 1 : 0;
        dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);


        /* Reset the Controller */
        dwc_otg_core_reset(core_if);

        /* Initialize parameters from Hardware configuration registers. */
        dev_if->num_in_eps = calc_num_in_eps(core_if);
        dev_if->num_out_eps = calc_num_out_eps(core_if);


        DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", core_if->hwcfg4.b.num_dev_perio_in_ep);

        for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
        {
                dev_if->perio_tx_fifo_size[i] =
                        dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
                DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
                                i, dev_if->perio_tx_fifo_size[i]);
        }

        for (i=0; i < core_if->hwcfg4.b.num_in_eps; i++)
        {
                dev_if->tx_fifo_size[i] =
                        dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
                DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
                        i, dev_if->perio_tx_fifo_size[i]);
        }

        core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
        core_if->rx_fifo_size =
                        dwc_read_reg32(&global_regs->grxfsiz);
        core_if->nperio_tx_fifo_size =
                        dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;

        DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
        DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
        DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", core_if->nperio_tx_fifo_size);

        /* This programming sequence needs to happen in FS mode before any other
         * programming occurs */
        if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
                (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
                        /* If FS mode with FS PHY */

                        /* core_init() is now called on every switch so only call the
                         * following for the first time through. */
                        if (!core_if->phy_init_done) {
                                core_if->phy_init_done = 1;
                                DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
                                usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
                                usbcfg.b.physel = 1;
                                dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);

                                /* Reset after a PHY select */
                                dwc_otg_core_reset(core_if);
                        }

                        /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.      Also
                         * do this on HNP Dev/Host mode switches (done in dev_init and
                         * host_init). */
                        if (dwc_otg_is_host_mode(core_if)) {
                                init_fslspclksel(core_if);
                        }
                        else {
                                init_devspd(core_if);
                        }

                        if (core_if->core_params->i2c_enable) {
                                DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
                                /* Program GUSBCFG.OtgUtmifsSel to I2C */
                                usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
                                usbcfg.b.otgutmifssel = 1;
                                dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);

                                /* Program GI2CCTL.I2CEn */
                                i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
                                i2cctl.b.i2cdevaddr = 1;
                                i2cctl.b.i2cen = 0;
                                dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
                                i2cctl.b.i2cen = 1;
                                dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
                        }

                } /* endif speed == DWC_SPEED_PARAM_FULL */

                else {
                        /* High speed PHY. */
                        if (!core_if->phy_init_done) {
                                core_if->phy_init_done = 1;
                                /* HS PHY parameters.  These parameters are preserved
                                 * during soft reset so only program the first time.  Do
                                 * a soft reset immediately after setting phyif.  */
                                usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type;
                                if (usbcfg.b.ulpi_utmi_sel == 1) {
                                        /* ULPI interface */
                                        usbcfg.b.phyif = 0;
                                        usbcfg.b.ddrsel = core_if->core_params->phy_ulpi_ddr;
                                }
                                else {
                                        /* UTMI+ interface */
                                        if (core_if->core_params->phy_utmi_width == 16) {
                                                usbcfg.b.phyif = 1;
                                }
                                else {
                                        usbcfg.b.phyif = 0;
                                }
                        }

                        dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);

                        /* Reset after setting the PHY parameters */
                        dwc_otg_core_reset(core_if);
                }
        }

        if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
                (core_if->hwcfg2.b.fs_phy_type == 1) &&
                (core_if->core_params->ulpi_fs_ls)) {
                DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
                usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
                usbcfg.b.ulpi_fsls = 1;
                usbcfg.b.ulpi_clk_sus_m = 1;
                dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
        }
        else {
                usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
                usbcfg.b.ulpi_fsls = 0;
                usbcfg.b.ulpi_clk_sus_m = 0;
                dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
        }

        /* Program the GAHBCFG Register.*/
        switch (core_if->hwcfg2.b.architecture) {

        case DWC_SLAVE_ONLY_ARCH:
                DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
                ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
                ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
                core_if->dma_enable = 0;
                core_if->dma_desc_enable = 0;
                break;

        case DWC_EXT_DMA_ARCH:
                DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
                ahbcfg.b.hburstlen = core_if->core_params->dma_burst_size;
                core_if->dma_enable = (core_if->core_params->dma_enable != 0);
                core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
                break;

        case DWC_INT_DMA_ARCH:
                DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
                ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
                core_if->dma_enable = (core_if->core_params->dma_enable != 0);
                core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
                break;

        }
        ahbcfg.b.dmaenable = core_if->dma_enable;
        dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);

        core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;

        core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
        core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
        DWC_PRINT("Periodic Transfer Interrupt Enhancement - %s\n", ((core_if->pti_enh_enable) ? "enabled": "disabled"));
        DWC_PRINT("Multiprocessor Interrupt Enhancement - %s\n", ((core_if->multiproc_int_enable) ? "enabled": "disabled"));

        /*
         * Program the GUSBCFG register.
         */
        usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);

        switch (core_if->hwcfg2.b.op_mode) {
        case DWC_MODE_HNP_SRP_CAPABLE:
                usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
                   DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
                usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
                   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
                break;

        case DWC_MODE_SRP_ONLY_CAPABLE:
                usbcfg.b.hnpcap = 0;
                usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
                   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
                break;

        case DWC_MODE_NO_HNP_SRP_CAPABLE:
                usbcfg.b.hnpcap = 0;
                usbcfg.b.srpcap = 0;
                break;

        case DWC_MODE_SRP_CAPABLE_DEVICE:
                usbcfg.b.hnpcap = 0;
                usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
                DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
                break;

        case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
                usbcfg.b.hnpcap = 0;
                usbcfg.b.srpcap = 0;
                break;

        case DWC_MODE_SRP_CAPABLE_HOST:
                usbcfg.b.hnpcap = 0;
                usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
                DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
                break;

        case DWC_MODE_NO_SRP_CAPABLE_HOST:
                usbcfg.b.hnpcap = 0;
                usbcfg.b.srpcap = 0;
                break;
        }

        dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);

        /* Enable common interrupts */
        dwc_otg_enable_common_interrupts(core_if);

        /* Do device or host intialization based on mode during PCD
         * and HCD initialization  */
        if (dwc_otg_is_host_mode(core_if)) {
                DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
                core_if->op_state = A_HOST;
        }
        else {
                DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
                core_if->op_state = B_PERIPHERAL;
#ifdef DWC_DEVICE_ONLY
                dwc_otg_core_dev_init(core_if);
#endif
        }
}


/**
 * This function enables the Device mode interrupts.
 *
 * @param core_if Programming view of DWC_otg controller
 */
void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *core_if)
{
        gintmsk_data_t intr_mask = { .d32 = 0};
        dwc_otg_core_global_regs_t *global_regs =
                core_if->core_global_regs;

        DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);

        /* Disable all interrupts. */
        dwc_write_reg32(&global_regs->gintmsk, 0);

        /* Clear any pending interrupts */
        dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);

        /* Enable the common interrupts */
        dwc_otg_enable_common_interrupts(core_if);

        /* Enable interrupts */
        intr_mask.b.usbreset = 1;
        intr_mask.b.enumdone = 1;

        if(!core_if->multiproc_int_enable) {
                intr_mask.b.inepintr = 1;
                intr_mask.b.outepintr = 1;
        }

        intr_mask.b.erlysuspend = 1;

        if(core_if->en_multiple_tx_fifo == 0) {
                intr_mask.b.epmismatch = 1;
        }


#ifdef DWC_EN_ISOC
        if(core_if->dma_enable) {
                if(core_if->dma_desc_enable == 0) {
                        if(core_if->pti_enh_enable) {
                                dctl_data_t dctl = { .d32 = 0 };
                                dctl.b.ifrmnum = 1;
                                dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
                        } else {
                                intr_mask.b.incomplisoin = 1;
                                intr_mask.b.incomplisoout = 1;
                        }
                }
        } else {
                intr_mask.b.incomplisoin = 1;
                intr_mask.b.incomplisoout = 1;
        }
#endif // DWC_EN_ISOC

/** @todo NGS: Should this be a module parameter? */
#ifdef USE_PERIODIC_EP
        intr_mask.b.isooutdrop = 1;
        intr_mask.b.eopframe = 1;
        intr_mask.b.incomplisoin = 1;
        intr_mask.b.incomplisoout = 1;
#endif

        dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);

        DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
                dwc_read_reg32(&global_regs->gintmsk));
}

/**
 * This function initializes the DWC_otg controller registers for
 * device mode.
 *
 * @param core_if Programming view of DWC_otg controller
 *
 */
void dwc_otg_core_dev_init(dwc_otg_core_if_t *core_if)
{
        int i;
        dwc_otg_core_global_regs_t *global_regs =
                core_if->core_global_regs;
        dwc_otg_dev_if_t *dev_if = core_if->dev_if;
        dwc_otg_core_params_t *params = core_if->core_params;
        dcfg_data_t dcfg = { .d32 = 0};
        grstctl_t resetctl = { .d32 = 0 };
        uint32_t rx_fifo_size;
        fifosize_data_t nptxfifosize;
        fifosize_data_t txfifosize;
        dthrctl_data_t dthrctl;
        fifosize_data_t ptxfifosize;

        /* Restart the Phy Clock */
        dwc_write_reg32(core_if->pcgcctl, 0);

        /* Device configuration register */
        init_devspd(core_if);
        dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
        dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
        dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;

        dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);

        /* Configure data FIFO sizes */
        if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
                DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", core_if->total_fifo_size);
                DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
                DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);

                /* Rx FIFO */
                DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
                                                dwc_read_reg32(&global_regs->grxfsiz));

                rx_fifo_size = params->dev_rx_fifo_size;
                dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size);

                DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
                        dwc_read_reg32(&global_regs->grxfsiz));

                /** Set Periodic Tx FIFO Mask all bits 0 */
                core_if->p_tx_msk = 0;

                /** Set Tx FIFO Mask all bits 0 */
                core_if->tx_msk = 0;

                if(core_if->en_multiple_tx_fifo == 0) {
                        /* Non-periodic Tx FIFO */
                        DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
                                                   dwc_read_reg32(&global_regs->gnptxfsiz));

                        nptxfifosize.b.depth  = params->dev_nperio_tx_fifo_size;
                        nptxfifosize.b.startaddr = params->dev_rx_fifo_size;

                        dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);

                        DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
                                                   dwc_read_reg32(&global_regs->gnptxfsiz));

                        /**@todo NGS: Fix Periodic FIFO Sizing! */
                        /*
                         * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
                         * Indexes of the FIFO size module parameters in the
                         * dev_perio_tx_fifo_size array and the FIFO size registers in
                         * the dptxfsiz array run from 0 to 14.
                         */
                        /** @todo Finish debug of this */
                        ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
                        for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
                        {
                                ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i];
                                DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
                                                        dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
                                dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],
                                                                 ptxfifosize.d32);
                                DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
                                                        dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
                                ptxfifosize.b.startaddr += ptxfifosize.b.depth;
                        }
                }
                else {
                        /*
                         * Tx FIFOs These FIFOs are numbered from 1 to 15.
                         * Indexes of the FIFO size module parameters in the
                         * dev_tx_fifo_size array and the FIFO size registers in
                         * the dptxfsiz_dieptxf array run from 0 to 14.
                         */


                        /* Non-periodic Tx FIFO */
                        DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
                                                        dwc_read_reg32(&global_regs->gnptxfsiz));

                        nptxfifosize.b.depth  = params->dev_nperio_tx_fifo_size;
                        nptxfifosize.b.startaddr = params->dev_rx_fifo_size;

                        dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);

                        DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
                                                        dwc_read_reg32(&global_regs->gnptxfsiz));

                        txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
                        /*
                             Modify by kaiker ,for RT3052 device mode config

                             In RT3052,Since the _core_if->hwcfg4.b.num_dev_perio_in_ep is
                             configed to 0 so these TX_FIF0 not config.IN EP will can't
                             more than 1 if not modify it.

                        */
#if 1
                        for (i=1 ; i <= dev_if->num_in_eps; i++)
#else
                        for (i=1; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
#endif
                        {

                                txfifosize.b.depth = params->dev_tx_fifo_size[i];

                                DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
                                        dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));

                                dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i-1],
                                        txfifosize.d32);

                                DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
                                        dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1]));

                                txfifosize.b.startaddr += txfifosize.b.depth;
                        }
                }
        }
        /* Flush the FIFOs */
        dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */
        dwc_otg_flush_rx_fifo(core_if);

        /* Flush the Learning Queue. */
        resetctl.b.intknqflsh = 1;
        dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);

        /* Clear all pending Device Interrupts */

        if(core_if->multiproc_int_enable) {
        }

        /** @todo - if the condition needed to be checked
         *  or in any case all pending interrutps should be cleared?
         */
        if(core_if->multiproc_int_enable) {
                for(i = 0; i < core_if->dev_if->num_in_eps; ++i) {
                        dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[i], 0);
                }

                for(i = 0; i < core_if->dev_if->num_out_eps; ++i) {
                        dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[i], 0);
                }

                dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
                dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0);
        } else {
                dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0);
                dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0);
                dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
                dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0);
        }

        for (i=0; i <= dev_if->num_in_eps; i++)
        {
                depctl_data_t depctl;
                depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
                if (depctl.b.epena) {
                        depctl.d32 = 0;
                        depctl.b.epdis = 1;
                        depctl.b.snak = 1;
                }
                else {
                        depctl.d32 = 0;
                }

                dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);


                dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
                dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
                dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
        }

        for (i=0; i <= dev_if->num_out_eps; i++)
        {
                depctl_data_t depctl;
                depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
                if (depctl.b.epena) {
                        depctl.d32 = 0;
                        depctl.b.epdis = 1;
                        depctl.b.snak = 1;
                }
                else {
                        depctl.d32 = 0;
                }

                dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);

                dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
                dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0);
                dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
        }

        if(core_if->en_multiple_tx_fifo && core_if->dma_enable) {
                dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
                dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
                dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;

                dev_if->rx_thr_length = params->rx_thr_length;
                dev_if->tx_thr_length = params->tx_thr_length;

                dev_if->setup_desc_index = 0;

                dthrctl.d32 = 0;
                dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
                dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
                dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
                dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
                dthrctl.b.rx_thr_len = dev_if->rx_thr_length;

                dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, dthrctl.d32);

                DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
                        dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, dthrctl.b.rx_thr_len);

        }

        dwc_otg_enable_device_interrupts(core_if);

        {
                diepmsk_data_t msk = { .d32 = 0 };
                msk.b.txfifoundrn = 1;
                if(core_if->multiproc_int_enable) {
                        dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], msk.d32, msk.d32);
                } else {
                        dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32, msk.d32);
                }
        }


        if(core_if->multiproc_int_enable) {
                /* Set NAK on Babble */
                dctl_data_t dctl = { .d32 = 0};
                dctl.b.nakonbble = 1;
                dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
        }
}

/**
 * This function enables the Host mode interrupts.
 *
 * @param core_if Programming view of DWC_otg controller
 */
void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *core_if)
{
        dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
        gintmsk_data_t intr_mask = { .d32 = 0 };

        DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);

        /* Disable all interrupts. */
        dwc_write_reg32(&global_regs->gintmsk, 0);

        /* Clear any pending interrupts. */
        dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);

        /* Enable the common interrupts */
        dwc_otg_enable_common_interrupts(core_if);

        /*
         * Enable host mode interrupts without disturbing common
         * interrupts.
         */
        intr_mask.b.sofintr = 1;
        intr_mask.b.portintr = 1;
        intr_mask.b.hcintr = 1;

        dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
}

/**
 * This function disables the Host Mode interrupts.
 *
 * @param core_if Programming view of DWC_otg controller
 */
void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *core_if)
{
        dwc_otg_core_global_regs_t *global_regs =
        core_if->core_global_regs;
        gintmsk_data_t intr_mask = { .d32 = 0 };

        DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);

        /*
         * Disable host mode interrupts without disturbing common
         * interrupts.
         */
        intr_mask.b.sofintr = 1;
        intr_mask.b.portintr = 1;
        intr_mask.b.hcintr = 1;
        intr_mask.b.ptxfempty = 1;
        intr_mask.b.nptxfempty = 1;

        dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
}

/**
 * This function initializes the DWC_otg controller registers for
 * host mode.
 *
 * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
 * request queues. Host channels are reset to ensure that they are ready for
 * performing transfers.
 *
 * @param core_if Programming view of DWC_otg controller
 *
 */
void dwc_otg_core_host_init(dwc_otg_core_if_t *core_if)
{
        dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
        dwc_otg_host_if_t       *host_if = core_if->host_if;
        dwc_otg_core_params_t   *params = core_if->core_params;
        hprt0_data_t            hprt0 = { .d32 = 0 };
        fifosize_data_t         nptxfifosize;
        fifosize_data_t         ptxfifosize;
        int                     i;
        hcchar_data_t           hcchar;
        hcfg_data_t             hcfg;
        dwc_otg_hc_regs_t       *hc_regs;
        int                     num_channels;
        gotgctl_data_t  gotgctl = { .d32 = 0 };

        DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, core_if);

        /* Restart the Phy Clock */
        dwc_write_reg32(core_if->pcgcctl, 0);

        /* Initialize Host Configuration Register */
        init_fslspclksel(core_if);
        if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL)
        {
                hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
                hcfg.b.fslssupp = 1;
                dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
        }

        /* Configure data FIFO sizes */
        if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
                DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", core_if->total_fifo_size);
                DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
                DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
                DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);

                /* Rx FIFO */
                DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
                dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
                DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));

                /* Non-periodic Tx FIFO */
                DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
                nptxfifosize.b.depth  = params->host_nperio_tx_fifo_size;
                nptxfifosize.b.startaddr = params->host_rx_fifo_size;
                dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
                DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));

                /* Periodic Tx FIFO */
                DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
                ptxfifosize.b.depth      = params->host_perio_tx_fifo_size;
                ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
                dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
                DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
        }

        /* Clear Host Set HNP Enable in the OTG Control Register */
        gotgctl.b.hstsethnpen = 1;
        dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0);

        /* Make sure the FIFOs are flushed. */
        dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */);
        dwc_otg_flush_rx_fifo(core_if);

        /* Flush out any leftover queued requests. */
        num_channels = core_if->core_params->host_channels;
        for (i = 0; i < num_channels; i++)
        {
                hc_regs = core_if->host_if->hc_regs[i];
                hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
                hcchar.b.chen = 0;
                hcchar.b.chdis = 1;
                hcchar.b.epdir = 0;
                dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
        }

        /* Halt all channels to put them into a known state. */
        for (i = 0; i < num_channels; i++)
        {
                int count = 0;
                hc_regs = core_if->host_if->hc_regs[i];
                hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
                hcchar.b.chen = 1;
                hcchar.b.chdis = 1;
                hcchar.b.epdir = 0;
                dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
                DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
                do {
                        hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
                        if (++count > 1000)
                        {
                                DWC_ERROR("%s: Unable to clear halt on channel %d\n",
                                          __func__, i);
                                break;
                        }
                }
                while (hcchar.b.chen);
        }

        /* Turn on the vbus power. */
        DWC_PRINT("Init: Port Power? op_state=%d\n", core_if->op_state);
        if (core_if->op_state == A_HOST) {
                hprt0.d32 = dwc_otg_read_hprt0(core_if);
                DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
                if (hprt0.b.prtpwr == 0) {
                        hprt0.b.prtpwr = 1;
                        dwc_write_reg32(host_if->hprt0, hprt0.d32);
                }
        }

        dwc_otg_enable_host_interrupts(core_if);
}

/**
 * Prepares a host channel for transferring packets to/from a specific
 * endpoint. The HCCHARn register is set up with the characteristics specified
 * in _hc. Host channel interrupts that may need to be serviced while this
 * transfer is in progress are enabled.
 *
 * @param core_if Programming view of DWC_otg controller
 * @param hc Information needed to initialize the host channel
 */
void dwc_otg_hc_init(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
        uint32_t intr_enable;
        hcintmsk_data_t hc_intr_mask;
        gintmsk_data_t gintmsk = { .d32 = 0 };
        hcchar_data_t hcchar;
        hcsplt_data_t hcsplt;

        uint8_t hc_num = hc->hc_num;
        dwc_otg_host_if_t *host_if = core_if->host_if;
        dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];

        /* Clear old interrupt conditions for this host channel. */
        hc_intr_mask.d32 = 0xFFFFFFFF;
        hc_intr_mask.b.reserved = 0;
        dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);

        /* Enable channel interrupts required for this transfer. */
        hc_intr_mask.d32 = 0;
        hc_intr_mask.b.chhltd = 1;
        if (core_if->dma_enable) {
                hc_intr_mask.b.ahberr = 1;
                if (hc->error_state && !hc->do_split &&
                        hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
                        hc_intr_mask.b.ack = 1;
                        if (hc->ep_is_in) {
                                hc_intr_mask.b.datatglerr = 1;
                                if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
                                        hc_intr_mask.b.nak = 1;
                                }
                        }
                }
        }
        else {
                switch (hc->ep_type) {
                case DWC_OTG_EP_TYPE_CONTROL:
                case DWC_OTG_EP_TYPE_BULK:
                        hc_intr_mask.b.xfercompl = 1;
                        hc_intr_mask.b.stall = 1;
                        hc_intr_mask.b.xacterr = 1;
                        hc_intr_mask.b.datatglerr = 1;
                        if (hc->ep_is_in) {
                                hc_intr_mask.b.bblerr = 1;
                        }
                        else {
                                hc_intr_mask.b.nak = 1;
                                hc_intr_mask.b.nyet = 1;
                                if (hc->do_ping) {
                                        hc_intr_mask.b.ack = 1;
                                }
                        }

                        if (hc->do_split) {
                                hc_intr_mask.b.nak = 1;
                                if (hc->complete_split) {
                                        hc_intr_mask.b.nyet = 1;
                                }
                                else {
                                        hc_intr_mask.b.ack = 1;
                                }
                        }

                        if (hc->error_state) {
                                hc_intr_mask.b.ack = 1;
                        }
                        break;
                case DWC_OTG_EP_TYPE_INTR:
                        hc_intr_mask.b.xfercompl = 1;
                        hc_intr_mask.b.nak = 1;
                        hc_intr_mask.b.stall = 1;
                        hc_intr_mask.b.xacterr = 1;
                        hc_intr_mask.b.datatglerr = 1;
                        hc_intr_mask.b.frmovrun = 1;

                        if (hc->ep_is_in) {
                                hc_intr_mask.b.bblerr = 1;
                        }
                        if (hc->error_state) {
                                hc_intr_mask.b.ack = 1;
                        }
                        if (hc->do_split) {
                                if (hc->complete_split) {
                                        hc_intr_mask.b.nyet = 1;
                                }
                                else {
                                        hc_intr_mask.b.ack = 1;
                                }
                        }
                        break;
                case DWC_OTG_EP_TYPE_ISOC:
                        hc_intr_mask.b.xfercompl = 1;
                        hc_intr_mask.b.frmovrun = 1;
                        hc_intr_mask.b.ack = 1;

                        if (hc->ep_is_in) {
                                hc_intr_mask.b.xacterr = 1;
                                hc_intr_mask.b.bblerr = 1;
                        }
                        break;
                }
        }
        dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);

//      if(hc->ep_type == DWC_OTG_EP_TYPE_BULK && !hc->ep_is_in)
//                      hc->max_packet = 512;
        /* Enable the top level host channel interrupt. */
        intr_enable = (1 << hc_num);
        dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);

        /* Make sure host channel interrupts are enabled. */
        gintmsk.b.hcintr = 1;
        dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);

        /*
         * Program the HCCHARn register with the endpoint characteristics for
         * the current transfer.
         */
        hcchar.d32 = 0;
        hcchar.b.devaddr = hc->dev_addr;
        hcchar.b.epnum = hc->ep_num;
        hcchar.b.epdir = hc->ep_is_in;
        hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
        hcchar.b.eptype = hc->ep_type;
        hcchar.b.mps = hc->max_packet;

        dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);

        DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
        DWC_DEBUGPL(DBG_HCDV, "  Dev Addr: %d\n", hcchar.b.devaddr);
        DWC_DEBUGPL(DBG_HCDV, "  Ep Num: %d\n", hcchar.b.epnum);
        DWC_DEBUGPL(DBG_HCDV, "  Is In: %d\n", hcchar.b.epdir);
        DWC_DEBUGPL(DBG_HCDV, "  Is Low Speed: %d\n", hcchar.b.lspddev);
        DWC_DEBUGPL(DBG_HCDV, "  Ep Type: %d\n", hcchar.b.eptype);
        DWC_DEBUGPL(DBG_HCDV, "  Max Pkt: %d\n", hcchar.b.mps);
        DWC_DEBUGPL(DBG_HCDV, "  Multi Cnt: %d\n", hcchar.b.multicnt);

        /*
         * Program the HCSPLIT register for SPLITs
         */
        hcsplt.d32 = 0;
        if (hc->do_split) {
                DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", hc->hc_num,
                           hc->complete_split ? "CSPLIT" : "SSPLIT");
                hcsplt.b.compsplt = hc->complete_split;
                hcsplt.b.xactpos = hc->xact_pos;
                hcsplt.b.hubaddr = hc->hub_addr;
                hcsplt.b.prtaddr = hc->port_addr;
                DWC_DEBUGPL(DBG_HCDV, "   comp split %d\n", hc->complete_split);
                DWC_DEBUGPL(DBG_HCDV, "   xact pos %d\n", hc->xact_pos);
                DWC_DEBUGPL(DBG_HCDV, "   hub addr %d\n", hc->hub_addr);
                DWC_DEBUGPL(DBG_HCDV, "   port addr %d\n", hc->port_addr);
                DWC_DEBUGPL(DBG_HCDV, "   is_in %d\n", hc->ep_is_in);
                DWC_DEBUGPL(DBG_HCDV, "   Max Pkt: %d\n", hcchar.b.mps);
                DWC_DEBUGPL(DBG_HCDV, "   xferlen: %d\n", hc->xfer_len);
        }
        dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);

}

/**
 * Attempts to halt a host channel. This function should only be called in
 * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
 * normal circumstances in DMA mode, the controller halts the channel when the
 * transfer is complete or a condition occurs that requires application
 * intervention.
 *
 * In slave mode, checks for a free request queue entry, then sets the Channel
 * Enable and Channel Disable bits of the Host Channel Characteristics
 * register of the specified channel to intiate the halt. If there is no free
 * request queue entry, sets only the Channel Disable bit of the HCCHARn
 * register to flush requests for this channel. In the latter case, sets a
 * flag to indicate that the host channel needs to be halted when a request
 * queue slot is open.
 *
 * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
 * HCCHARn register. The controller ensures there is space in the request
 * queue before submitting the halt request.
 *
 * Some time may elapse before the core flushes any posted requests for this
 * host channel and halts. The Channel Halted interrupt handler completes the
 * deactivation of the host channel.
 *
 * @param core_if Controller register interface.
 * @param hc Host channel to halt.
 * @param halt_status Reason for halting the channel.
 */
void dwc_otg_hc_halt(dwc_otg_core_if_t *core_if,
                         dwc_hc_t *hc,
                         dwc_otg_halt_status_e halt_status)
{
        gnptxsts_data_t                 nptxsts;
        hptxsts_data_t                  hptxsts;
        hcchar_data_t                   hcchar;
        dwc_otg_hc_regs_t               *hc_regs;
        dwc_otg_core_global_regs_t      *global_regs;
        dwc_otg_host_global_regs_t      *host_global_regs;

        hc_regs = core_if->host_if->hc_regs[hc->hc_num];
        global_regs = core_if->core_global_regs;
        host_global_regs = core_if->host_if->host_global_regs;

        WARN_ON(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);

        if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
                halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
                /*
                 * Disable all channel interrupts except Ch Halted. The QTD
                 * and QH state associated with this transfer has been cleared
                 * (in the case of URB_DEQUEUE), so the channel needs to be
                 * shut down carefully to prevent crashes.
                 */
                hcintmsk_data_t hcintmsk;
                hcintmsk.d32 = 0;
                hcintmsk.b.chhltd = 1;
                dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);

                /*
                 * Make sure no other interrupts besides halt are currently
                 * pending. Handling another interrupt could cause a crash due
                 * to the QTD and QH state.
                 */
                dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);

                /*
                 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
                 * even if the channel was already halted for some other
                 * reason.
                 */
                hc->halt_status = halt_status;

                hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
                if (hcchar.b.chen == 0) {
                        /*
                         * The channel is either already halted or it hasn't
                         * started yet. In DMA mode, the transfer may halt if
                         * it finishes normally or a condition occurs that
                         * requires driver intervention. Don't want to halt
                         * the channel again. In either Slave or DMA mode,
                         * it's possible that the transfer has been assigned
                         * to a channel, but not started yet when an URB is
                         * dequeued. Don't want to halt a channel that hasn't
                         * started yet.
                         */
                        return;
                }
        }

        if (hc->halt_pending) {
                /*
                 * A halt has already been issued for this channel. This might
                 * happen when a transfer is aborted by a higher level in
                 * the stack.
                 */
#ifdef DEBUG
                DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
                          __func__, hc->hc_num);

/*              dwc_otg_dump_global_registers(core_if); */
/*              dwc_otg_dump_host_registers(core_if); */
#endif
                return;
        }

        hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
        hcchar.b.chen = 1;
        hcchar.b.chdis = 1;

        if (!core_if->dma_enable) {
                /* Check for space in the request queue to issue the halt. */
                if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
                        hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
                        nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
                        if (nptxsts.b.nptxqspcavail == 0) {
                                hcchar.b.chen = 0;
                        }
                }
                else {
                        hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
                        if ((hptxsts.b.ptxqspcavail == 0) || (core_if->queuing_high_bandwidth)) {
                                hcchar.b.chen = 0;
                        }
                }
        }

        dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);

        hc->halt_status = halt_status;

        if (hcchar.b.chen) {
                hc->halt_pending = 1;
                hc->halt_on_queue = 0;
        }
        else {
                hc->halt_on_queue = 1;
        }

        DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
        DWC_DEBUGPL(DBG_HCDV, "  hcchar: 0x%08x\n", hcchar.d32);
        DWC_DEBUGPL(DBG_HCDV, "  halt_pending: %d\n", hc->halt_pending);
        DWC_DEBUGPL(DBG_HCDV, "  halt_on_queue: %d\n", hc->halt_on_queue);
        DWC_DEBUGPL(DBG_HCDV, "  halt_status: %d\n", hc->halt_status);

        return;
}

/**
 * Clears the transfer state for a host channel. This function is normally
 * called after a transfer is done and the host channel is being released.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param hc Identifies the host channel to clean up.
 */
void dwc_otg_hc_cleanup(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
        dwc_otg_hc_regs_t *hc_regs;

        hc->xfer_started = 0;

        /*
         * Clear channel interrupt enables and any unhandled channel interrupt
         * conditions.
         */
        hc_regs = core_if->host_if->hc_regs[hc->hc_num];
        dwc_write_reg32(&hc_regs->hcintmsk, 0);
        dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);

#ifdef DEBUG
        del_timer(&core_if->hc_xfer_timer[hc->hc_num]);
        {
                hcchar_data_t hcchar;
                hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
                if (hcchar.b.chdis) {
                        DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
                                 __func__, hc->hc_num, hcchar.d32);
                }
        }
#endif
}

/**
 * Sets the channel property that indicates in which frame a periodic transfer
 * should occur. This is always set to the _next_ frame. This function has no
 * effect on non-periodic transfers.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param hc Identifies the host channel to set up and its properties.
 * @param hcchar Current value of the HCCHAR register for the specified host
 * channel.
 */
static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *core_if,
                                         dwc_hc_t *hc,
                                         hcchar_data_t *hcchar)
{
        if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
                hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
                hfnum_data_t    hfnum;
                hfnum.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum);

                /* 1 if _next_ frame is odd, 0 if it's even */
                hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
#ifdef DEBUG
                if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split && !hc->complete_split) {
                        switch (hfnum.b.frnum & 0x7) {
                        case 7:
                                core_if->hfnum_7_samples++;
                                core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
                                break;
                        case 0:
                                core_if->hfnum_0_samples++;
                                core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
                                break;
                        default:
                                core_if->hfnum_other_samples++;
                                core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
                                break;
                        }
                }
#endif
        }
}

#ifdef DEBUG
static void hc_xfer_timeout(unsigned long ptr)
{
        hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)ptr;
        int hc_num = xfer_info->hc->hc_num;
        DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
        DWC_WARN("      start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
}
#endif

/*
 * This function does the setup for a data transfer for a host channel and
 * starts the transfer. May be called in either Slave mode or DMA mode. In
 * Slave mode, the caller must ensure that there is sufficient space in the
 * request queue and Tx Data FIFO.
 *
 * For an OUT transfer in Slave mode, it loads a data packet into the
 * appropriate FIFO. If necessary, additional data packets will be loaded in
 * the Host ISR.
 *
 * For an IN transfer in Slave mode, a data packet is requested. The data
 * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
 * additional data packets are requested in the Host ISR.
 *
 * For a PING transfer in Slave mode, the Do Ping bit is set in the egards,
 *
 * Steven
 *
 * register along with a packet count of 1 and the channel is enabled. This
 * causes a single PING transaction to occur. Other fields in HCTSIZ are
 * simply set to 0 since no data transfer occurs in this case.
 *
 * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
 * all the information required to perform the subsequent data transfer. In
 * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
 * controller performs the entire PING protocol, then starts the data
 * transfer.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param hc Information needed to initialize the host channel. The xfer_len
 * value may be reduced to accommodate the max widths of the XferSize and
 * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
 * to reflect the final xfer_len value.
 */
void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
        hcchar_data_t hcchar;
        hctsiz_data_t hctsiz;
        uint16_t num_packets;
        uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
        uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
        dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];

        hctsiz.d32 = 0;

        if (hc->do_ping) {
                if (!core_if->dma_enable) {
                        dwc_otg_hc_do_ping(core_if, hc);
                        hc->xfer_started = 1;
                        return;
                }
                else {
                        hctsiz.b.dopng = 1;
                }
        }

        if (hc->do_split) {
                num_packets = 1;

                if (hc->complete_split && !hc->ep_is_in) {
                        /* For CSPLIT OUT Transfer, set the size to 0 so the
                         * core doesn't expect any data written to the FIFO */
                        hc->xfer_len = 0;
                }
                else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
                        hc->xfer_len = hc->max_packet;
                }
                else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
                        hc->xfer_len = 188;
                }

                hctsiz.b.xfersize = hc->xfer_len;
        }
        else {
                /*
                 * Ensure that the transfer length and packet count will fit
                 * in the widths allocated for them in the HCTSIZn register.
                 */
                if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
                        hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
                        /*
                         * Make sure the transfer size is no larger than one
                         * (micro)frame's worth of data. (A check was done
                         * when the periodic transfer was accepted to ensure
                         * that a (micro)frame's worth of data can be
                         * programmed into a channel.)
                         */
                        uint32_t max_periodic_len = hc->multi_count * hc->max_packet;
                        if (hc->xfer_len > max_periodic_len) {
                                hc->xfer_len = max_periodic_len;
                        }
                        else {
                        }

                }
                else if (hc->xfer_len > max_hc_xfer_size) {
                        /* Make sure that xfer_len is a multiple of max packet size. */
                        hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
                }

                if (hc->xfer_len > 0) {
                        num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
                        if (num_packets > max_hc_pkt_count) {
                                num_packets = max_hc_pkt_count;
                                hc->xfer_len = num_packets * hc->max_packet;
                        }
                }
                else {
                        /* Need 1 packet for transfer length of 0. */
                        num_packets = 1;
                }

                if (hc->ep_is_in) {
                        /* Always program an integral # of max packets for IN transfers. */
                        hc->xfer_len = num_packets * hc->max_packet;
                }

                if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
                        hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
                        /*
                         * Make sure that the multi_count field matches the
                         * actual transfer length.
                         */
                        hc->multi_count = num_packets;
                }

                if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
                        /* Set up the initial PID for the transfer. */
                        if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
                                if (hc->ep_is_in) {
                                        if (hc->multi_count == 1) {
                                                hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
                                        }
                                        else if (hc->multi_count == 2) {
                                                hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
                                        }
                                        else {
                                                hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
                                        }
                                }
                                else {
                                        if (hc->multi_count == 1) {
                                                hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
                                        }
                                        else {
                                                hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
                                        }
                                }
                        }
                        else {
                                hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
                        }
                }

                hctsiz.b.xfersize = hc->xfer_len;
        }

        hc->start_pkt_count = num_packets;
        hctsiz.b.pktcnt = num_packets;
        hctsiz.b.pid = hc->data_pid_start;
        dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);

        DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
        DWC_DEBUGPL(DBG_HCDV, "  Xfer Size: %d\n", hctsiz.b.xfersize);
        DWC_DEBUGPL(DBG_HCDV, "  Num Pkts: %d\n", hctsiz.b.pktcnt);
        DWC_DEBUGPL(DBG_HCDV, "  Start PID: %d\n", hctsiz.b.pid);

        if (core_if->dma_enable) {
#if defined (CONFIG_DWC_OTG_HOST_ONLY)
                if ((uint32_t)hc->xfer_buff & 0x3) {
                        /* non DWORD-aligned buffer case*/
                        if(!hc->qh->dw_align_buf) {
                                hc->qh->dw_align_buf =
                                        dma_alloc_coherent(NULL,
                                                           core_if->core_params->max_transfer_size,
                                                           &hc->qh->dw_align_buf_dma,
                                                           GFP_ATOMIC | GFP_DMA);
                                if (!hc->qh->dw_align_buf) {

                                        DWC_ERROR("%s: Failed to allocate memory to handle "
                                                  "non-dword aligned buffer case\n", __func__);
                                        return;
                                }

                        }
                        if (!hc->ep_is_in) {
                            memcpy(hc->qh->dw_align_buf, phys_to_virt((uint32_t)hc->xfer_buff), hc->xfer_len);
                        }

                        dwc_write_reg32(&hc_regs->hcdma, hc->qh->dw_align_buf_dma);
                }
                else
#endif
                    dwc_write_reg32(&hc_regs->hcdma, (uint32_t)hc->xfer_buff);
        }

        /* Start the split */
        if (hc->do_split) {
                hcsplt_data_t hcsplt;
                hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
                hcsplt.b.spltena = 1;
                dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
        }

        hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
        hcchar.b.multicnt = hc->multi_count;
        hc_set_even_odd_frame(core_if, hc, &hcchar);
#ifdef DEBUG
        core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
        if (hcchar.b.chdis) {
                DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
                         __func__, hc->hc_num, hcchar.d32);
        }
#endif

        /* Set host channel enable after all other setup is complete. */
        hcchar.b.chen = 1;
        hcchar.b.chdis = 0;
        dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);

        hc->xfer_started = 1;
        hc->requests++;

        if (!core_if->dma_enable &&
                !hc->ep_is_in && hc->xfer_len > 0) {
                /* Load OUT packet into the appropriate Tx FIFO. */
                dwc_otg_hc_write_packet(core_if, hc);
        }

#ifdef DEBUG
        /* Start a timer for this transfer. */
        core_if->hc_xfer_timer[hc->hc_num].function = hc_xfer_timeout;
        core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
        core_if->hc_xfer_info[hc->hc_num].hc = hc;
        core_if->hc_xfer_timer[hc->hc_num].data = (unsigned long)(&core_if->hc_xfer_info[hc->hc_num]);
        core_if->hc_xfer_timer[hc->hc_num].expires = jiffies + (HZ*10);
        add_timer(&core_if->hc_xfer_timer[hc->hc_num]);
#endif
}

/**
 * This function continues a data transfer that was started by previous call
 * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
 * sufficient space in the request queue and Tx Data FIFO. This function
 * should only be called in Slave mode. In DMA mode, the controller acts
 * autonomously to complete transfers programmed to a host channel.
 *
 * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
 * if there is any data remaining to be queued. For an IN transfer, another
 * data packet is always requested. For the SETUP phase of a control transfer,
 * this function does nothing.
 *
 * @return 1 if a new request is queued, 0 if no more requests are required
 * for this transfer.
 */
int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
        DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);

        if (hc->do_split) {
                /* SPLITs always queue just once per channel */
                return 0;
        }
        else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
                /* SETUPs are queued only once since they can't be NAKed. */
                return 0;
        }
        else if (hc->ep_is_in) {
                /*
                 * Always queue another request for other IN transfers. If
                 * back-to-back INs are issued and NAKs are received for both,
                 * the driver may still be processing the first NAK when the
                 * second NAK is received. When the interrupt handler clears
                 * the NAK interrupt for the first NAK, the second NAK will
                 * not be seen. So we can't depend on the NAK interrupt
                 * handler to requeue a NAKed request. Instead, IN requests
                 * are issued each time this function is called. When the
                 * transfer completes, the extra requests for the channel will
                 * be flushed.
                 */
                hcchar_data_t hcchar;
                dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];

                hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
                hc_set_even_odd_frame(core_if, hc, &hcchar);
                hcchar.b.chen = 1;
                hcchar.b.chdis = 0;
                DWC_DEBUGPL(DBG_HCDV, "  IN xfer: hcchar = 0x%08x\n", hcchar.d32);
                dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
                hc->requests++;
                return 1;
        }
        else {
                /* OUT transfers. */
                if (hc->xfer_count < hc->xfer_len) {
                        if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
                                hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
                                hcchar_data_t hcchar;
                                dwc_otg_hc_regs_t *hc_regs;
                                hc_regs = core_if->host_if->hc_regs[hc->hc_num];
                                hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
                                hc_set_even_odd_frame(core_if, hc, &hcchar);
                        }

                        /* Load OUT packet into the appropriate Tx FIFO. */
                        dwc_otg_hc_write_packet(core_if, hc);
                        hc->requests++;
                        return 1;
                }
                else {
                        return 0;
                }
        }
}

/**
 * Starts a PING transfer. This function should only be called in Slave mode.
 * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
 */
void dwc_otg_hc_do_ping(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
        hcchar_data_t hcchar;
        hctsiz_data_t hctsiz;
        dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];

        DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);

        hctsiz.d32 = 0;
        hctsiz.b.dopng = 1;
        hctsiz.b.pktcnt = 1;
        dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);

        hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
        hcchar.b.chen = 1;
        hcchar.b.chdis = 0;
        dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
}

/*
 * This function writes a packet into the Tx FIFO associated with the Host
 * Channel. For a channel associated with a non-periodic EP, the non-periodic
 * Tx FIFO is written. For a channel associated with a periodic EP, the
 * periodic Tx FIFO is written. This function should only be called in Slave
 * mode.
 *
 * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
 * then number of bytes written to the Tx FIFO.
 */
void dwc_otg_hc_write_packet(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
        uint32_t i;
        uint32_t remaining_count;
        uint32_t byte_count;
        uint32_t dword_count;

        uint32_t *data_buff = (uint32_t *)(hc->xfer_buff);
        uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];

        remaining_count = hc->xfer_len - hc->xfer_count;
        if (remaining_count > hc->max_packet) {
                byte_count = hc->max_packet;
        }
        else {
                byte_count = remaining_count;
        }

        dword_count = (byte_count + 3) / 4;

        if ((((unsigned long)data_buff) & 0x3) == 0) {
                /* xfer_buff is DWORD aligned. */
                for (i = 0; i < dword_count; i++, data_buff++)
                {
                        dwc_write_reg32(data_fifo, *data_buff);
                }
        }
        else {
                /* xfer_buff is not DWORD aligned. */
                for (i = 0; i < dword_count; i++, data_buff++)
                {
                        dwc_write_reg32(data_fifo, get_unaligned(data_buff));
                }
        }

        hc->xfer_count += byte_count;
        hc->xfer_buff += byte_count;
}

/**
 * Gets the current USB frame number. This is the frame number from the last
 * SOF packet.
 */
uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *core_if)
{
        dsts_data_t dsts;
        dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);

        /* read current frame/microframe number from DSTS register */
        return dsts.b.soffn;
}

/**
 * This function reads a setup packet from the Rx FIFO into the destination
 * buffer.      This function is called from the Rx Status Queue Level (RxStsQLvl)
 * Interrupt routine when a SETUP packet has been received in Slave mode.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param dest Destination buffer for packet data.
 */
void dwc_otg_read_setup_packet(dwc_otg_core_if_t *core_if, uint32_t *dest)
{
        /* Get the 8 bytes of a setup transaction data */

        /* Pop 2 DWORDS off the receive data FIFO into memory */
        dest[0] = dwc_read_reg32(core_if->data_fifo[0]);
        dest[1] = dwc_read_reg32(core_if->data_fifo[0]);
}


/**
 * This function enables EP0 OUT to receive SETUP packets and configures EP0
 * IN for transmitting packets.  It is normally called when the
 * "Enumeration Done" interrupt occurs.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP0 data.
 */
void dwc_otg_ep0_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
        dwc_otg_dev_if_t *dev_if = core_if->dev_if;
        dsts_data_t dsts;
        depctl_data_t diepctl;
        depctl_data_t doepctl;
        dctl_data_t dctl = { .d32 = 0 };

        /* Read the Device Status and Endpoint 0 Control registers */
        dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
        diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
        doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);

        /* Set the MPS of the IN EP based on the enumeration speed */
        switch (dsts.b.enumspd) {
        case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
        case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
        case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
                diepctl.b.mps = DWC_DEP0CTL_MPS_64;
                break;
        case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
                diepctl.b.mps = DWC_DEP0CTL_MPS_8;
                break;
        }

        dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);

        /* Enable OUT EP for receive */
        doepctl.b.epena = 1;
        dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);

#ifdef VERBOSE
        DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
                dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
        DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
                dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
#endif
        dctl.b.cgnpinnak = 1;

        dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
        DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
                dwc_read_reg32(&dev_if->dev_global_regs->dctl));
}

/**
 * This function activates an EP.  The Device EP control register for
 * the EP is configured as defined in the ep structure.  Note: This
 * function is not used for EP0.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP to activate.
 */
void dwc_otg_ep_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
        dwc_otg_dev_if_t *dev_if = core_if->dev_if;
        depctl_data_t depctl;
        volatile uint32_t *addr;
        daint_data_t daintmsk = { .d32 = 0 };

        DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
                (ep->is_in?"IN":"OUT"));

        /* Read DEPCTLn register */
        if (ep->is_in == 1) {
                addr = &dev_if->in_ep_regs[ep->num]->diepctl;
                daintmsk.ep.in = 1<<ep->num;
        }
        else {
                addr = &dev_if->out_ep_regs[ep->num]->doepctl;
                daintmsk.ep.out = 1<<ep->num;
        }

        /* If the EP is already active don't change the EP Control
         * register. */
        depctl.d32 = dwc_read_reg32(addr);
        if (!depctl.b.usbactep) {
                depctl.b.mps = ep->maxpacket;
                depctl.b.eptype = ep->type;
                depctl.b.txfnum = ep->tx_fifo_num;

                if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
                        depctl.b.setd0pid = 1; // ???
                }
                else {
                        depctl.b.setd0pid = 1;
                }
                depctl.b.usbactep = 1;

                dwc_write_reg32(addr, depctl.d32);
                DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr));
        }

        /* Enable the Interrupt for this EP */
        if(core_if->multiproc_int_enable) {
                if (ep->is_in == 1) {
                        diepmsk_data_t diepmsk = { .d32 = 0};
                        diepmsk.b.xfercompl = 1;
                        diepmsk.b.timeout = 1;
                        diepmsk.b.epdisabled = 1;
                        diepmsk.b.ahberr = 1;
                        diepmsk.b.intknepmis = 1;
                        diepmsk.b.txfifoundrn = 1; //?????


                        if(core_if->dma_desc_enable) {
                                diepmsk.b.bna = 1;
                        }
/*
                        if(core_if->dma_enable) {
                                doepmsk.b.nak = 1;
                        }
*/
                        dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num], diepmsk.d32);

                } else {
                        doepmsk_data_t doepmsk = { .d32 = 0};
                        doepmsk.b.xfercompl = 1;
                        doepmsk.b.ahberr = 1;
                        doepmsk.b.epdisabled = 1;


                        if(core_if->dma_desc_enable) {
                                doepmsk.b.bna = 1;
                        }
/*
                        doepmsk.b.babble = 1;
                        doepmsk.b.nyet = 1;
                        doepmsk.b.nak = 1;
*/
                        dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[ep->num], doepmsk.d32);
                }
                dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk,
                         0, daintmsk.d32);
        } else {
                dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
                                 0, daintmsk.d32);
        }

        DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
                dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));

        ep->stall_clear_flag = 0;
        return;
}

/**
 * This function deactivates an EP. This is done by clearing the USB Active
 * EP bit in the Device EP control register. Note: This function is not used
 * for EP0. EP0 cannot be deactivated.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP to deactivate.
 */
void dwc_otg_ep_deactivate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
        depctl_data_t depctl = { .d32 = 0 };
        volatile uint32_t *addr;
        daint_data_t daintmsk = { .d32 = 0};

        /* Read DEPCTLn register */
        if (ep->is_in == 1) {
                addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
                daintmsk.ep.in = 1<<ep->num;
        }
        else {
                addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
                daintmsk.ep.out = 1<<ep->num;
        }

        depctl.b.usbactep = 0;

        if(core_if->dma_desc_enable)
                depctl.b.epdis = 1;

        dwc_write_reg32(addr, depctl.d32);

        /* Disable the Interrupt for this EP */
        if(core_if->multiproc_int_enable) {
                dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk,
                                 daintmsk.d32, 0);

                if (ep->is_in == 1) {
                        dwc_write_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[ep->num], 0);
                } else {
                        dwc_write_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[ep->num], 0);
                }
        } else {
                dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk,
                                         daintmsk.d32, 0);
        }
}

/**
 * This function does the setup for a data transfer for an EP and
 * starts the transfer.  For an IN transfer, the packets will be
 * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
 * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP to start the transfer on.
 */
static void init_dma_desc_chain(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
        dwc_otg_dma_desc_t* dma_desc;
        uint32_t offset;
        uint32_t xfer_est;
        int i;

        ep->desc_cnt = ( ep->total_len / ep->maxxfer)  +
                ((ep->total_len % ep->maxxfer) ? 1 : 0);
        if(!ep->desc_cnt)
                ep->desc_cnt = 1;

        dma_desc = ep->desc_addr;
        xfer_est = ep->total_len;
        offset = 0;
        for( i = 0; i < ep->desc_cnt; ++i) {
                /** DMA Descriptor Setup */
                if(xfer_est > ep->maxxfer) {
                        dma_desc->status.b.bs = BS_HOST_BUSY;
                        dma_desc->status.b.l = 0;
                        dma_desc->status.b.ioc = 0;
                        dma_desc->status.b.sp = 0;
                        dma_desc->status.b.bytes = ep->maxxfer;
                        dma_desc->buf = ep->dma_addr + offset;
                        dma_desc->status.b.bs = BS_HOST_READY;

                        xfer_est -= ep->maxxfer;
                        offset += ep->maxxfer;
                } else {
                        dma_desc->status.b.bs = BS_HOST_BUSY;
                        dma_desc->status.b.l = 1;
                        dma_desc->status.b.ioc = 1;
                        if(ep->is_in) {
                                dma_desc->status.b.sp = (xfer_est % ep->maxpacket) ?
                                        1 : ((ep->sent_zlp) ? 1 : 0);
                                dma_desc->status.b.bytes = xfer_est;
                        } else  {
                                dma_desc->status.b.bytes = xfer_est + ((4 - (xfer_est & 0x3)) & 0x3) ;
                        }

                        dma_desc->buf = ep->dma_addr + offset;
                        dma_desc->status.b.bs = BS_HOST_READY;
                }
                dma_desc ++;
        }
}

/**
 * This function does the setup for a data transfer for an EP and
 * starts the transfer.  For an IN transfer, the packets will be
 * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
 * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP to start the transfer on.
 */

void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
        depctl_data_t   depctl;
        deptsiz_data_t  deptsiz;
        gintmsk_data_t  intr_mask = { .d32 = 0};

        DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);

        DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
                "xfer_buff=%p start_xfer_buff=%p\n",
                ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
                ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);

        /* IN endpoint */
        if (ep->is_in == 1) {
                dwc_otg_dev_in_ep_regs_t *in_regs =
                        core_if->dev_if->in_ep_regs[ep->num];

                gnptxsts_data_t gtxstatus;

                gtxstatus.d32 =
                        dwc_read_reg32(&core_if->core_global_regs->gnptxsts);

                if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
#ifdef DEBUG
                        DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
#endif
                        return;
                }

                depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
                deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));

                ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
                                ep->maxxfer : (ep->total_len - ep->xfer_len);

                /* Zero Length Packet? */
                if ((ep->xfer_len - ep->xfer_count) == 0) {
                        deptsiz.b.xfersize = 0;
                        deptsiz.b.pktcnt = 1;
                }
                else {
                        /* Program the transfer size and packet count
                         *      as follows: xfersize = N * maxpacket +
                         *      short_packet pktcnt = N + (short_packet
                         *      exist ? 1 : 0)
                         */
                        deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
                        deptsiz.b.pktcnt =
                                (ep->xfer_len - ep->xfer_count - 1 + ep->maxpacket) /
                                ep->maxpacket;
                }


                /* Write the DMA register */
                if (core_if->dma_enable) {
                        if (core_if->dma_desc_enable == 0) {
                                dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
                                dwc_write_reg32 (&(in_regs->diepdma),
                                                 (uint32_t)ep->dma_addr);
                        }
                        else {
                                init_dma_desc_chain(core_if, ep);
                                /** DIEPDMAn Register write */
                                dwc_write_reg32(&in_regs->diepdma, ep->dma_desc_addr);
                        }
                }
                else {
                        dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
                        if(ep->type != DWC_OTG_EP_TYPE_ISOC) {
                                /**
                                 * Enable the Non-Periodic Tx FIFO empty interrupt,
                                 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
                                 * the data will be written into the fifo by the ISR.
                                 */
                                if(core_if->en_multiple_tx_fifo == 0) {
                                        intr_mask.b.nptxfempty = 1;
                                        dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
                                                intr_mask.d32, intr_mask.d32);
                                }
                                else {
                                        /* Enable the Tx FIFO Empty Interrupt for this EP */
                                        if(ep->xfer_len > 0) {
                                                uint32_t fifoemptymsk = 0;
                                                fifoemptymsk = 1 << ep->num;
                                                dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
                                                0, fifoemptymsk);

                                        }
                                }
                        }
                }

                /* EP enable, IN data in FIFO */
                depctl.b.cnak = 1;
                depctl.b.epena = 1;
                dwc_write_reg32(&in_regs->diepctl, depctl.d32);

                depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
                depctl.b.nextep = ep->num;
                dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);

        }
        else {
                /* OUT endpoint */
                dwc_otg_dev_out_ep_regs_t *out_regs =
                core_if->dev_if->out_ep_regs[ep->num];

                depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
                deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));

                ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
                                ep->maxxfer : (ep->total_len - ep->xfer_len);

                /* Program the transfer size and packet count as follows:
                 *
                 *      pktcnt = N
                 *      xfersize = N * maxpacket
                 */
                if ((ep->xfer_len - ep->xfer_count) == 0) {
                        /* Zero Length Packet */
                        deptsiz.b.xfersize = ep->maxpacket;
                        deptsiz.b.pktcnt = 1;
                }
                else {
                        deptsiz.b.pktcnt =
                                        (ep->xfer_len - ep->xfer_count + (ep->maxpacket - 1)) /
                                        ep->maxpacket;
                        ep->xfer_len = deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
                        deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
                }

                DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
                        ep->num,
                        deptsiz.b.xfersize, deptsiz.b.pktcnt);

                if (core_if->dma_enable) {
                        if (!core_if->dma_desc_enable) {
                                dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);

                                dwc_write_reg32 (&(out_regs->doepdma),
                                        (uint32_t)ep->dma_addr);
                        }
                        else {
                                init_dma_desc_chain(core_if, ep);

                                /** DOEPDMAn Register write */
                                dwc_write_reg32(&out_regs->doepdma, ep->dma_desc_addr);
                        }
                }
                else {
                        dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
                }

                /* EP enable */
                depctl.b.cnak = 1;
                depctl.b.epena = 1;

                dwc_write_reg32(&out_regs->doepctl, depctl.d32);

                DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
                        dwc_read_reg32(&out_regs->doepctl),
                        dwc_read_reg32(&out_regs->doeptsiz));
                DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
                        dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
                        dwc_read_reg32(&core_if->core_global_regs->gintmsk));
        }
}

/**
 * This function setup a zero length transfer in Buffer DMA and
 * Slave modes for usb requests with zero field set
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP to start the transfer on.
 *
 */
void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{

        depctl_data_t depctl;
        deptsiz_data_t deptsiz;
        gintmsk_data_t intr_mask = { .d32 = 0};

        DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);

        /* IN endpoint */
        if (ep->is_in == 1) {
                dwc_otg_dev_in_ep_regs_t *in_regs =
                        core_if->dev_if->in_ep_regs[ep->num];

                depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
                deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));

                deptsiz.b.xfersize = 0;
                deptsiz.b.pktcnt = 1;


                /* Write the DMA register */
                if (core_if->dma_enable) {
                        if (core_if->dma_desc_enable == 0) {
                                dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
                                dwc_write_reg32 (&(in_regs->diepdma),
                                                 (uint32_t)ep->dma_addr);
                        }
                }
                else {
                        dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
                        /**
                         * Enable the Non-Periodic Tx FIFO empty interrupt,
                         * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
                         * the data will be written into the fifo by the ISR.
                         */
                        if(core_if->en_multiple_tx_fifo == 0) {
                                intr_mask.b.nptxfempty = 1;
                                dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
                                        intr_mask.d32, intr_mask.d32);
                        }
                        else {
                                /* Enable the Tx FIFO Empty Interrupt for this EP */
                                if(ep->xfer_len > 0) {
                                        uint32_t fifoemptymsk = 0;
                                        fifoemptymsk = 1 << ep->num;
                                        dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
                                        0, fifoemptymsk);
                                }
                        }
                }

                /* EP enable, IN data in FIFO */
                depctl.b.cnak = 1;
                depctl.b.epena = 1;
                dwc_write_reg32(&in_regs->diepctl, depctl.d32);

                depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
                depctl.b.nextep = ep->num;
                dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);

        }
        else {
                /* OUT endpoint */
                dwc_otg_dev_out_ep_regs_t *out_regs =
                core_if->dev_if->out_ep_regs[ep->num];

                depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
                deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));

                /* Zero Length Packet */
                deptsiz.b.xfersize = ep->maxpacket;
                deptsiz.b.pktcnt = 1;

                if (core_if->dma_enable) {
                        if (!core_if->dma_desc_enable) {
                                dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);

                                dwc_write_reg32 (&(out_regs->doepdma),
                                        (uint32_t)ep->dma_addr);
                        }
                }
                else {
                        dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
                }

                /* EP enable */
                depctl.b.cnak = 1;
                depctl.b.epena = 1;

                dwc_write_reg32(&out_regs->doepctl, depctl.d32);

        }
}

/**
 * This function does the setup for a data transfer for EP0 and starts
 * the transfer.  For an IN transfer, the packets will be loaded into
 * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
 * unloaded from the Rx FIFO in the ISR.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP0 data.
 */
void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
        depctl_data_t depctl;
        deptsiz0_data_t deptsiz;
        gintmsk_data_t intr_mask = { .d32 = 0};
        dwc_otg_dma_desc_t* dma_desc;

        DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
        "xfer_buff=%p start_xfer_buff=%p \n",
        ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
        ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);

        ep->total_len = ep->xfer_len;

        /* IN endpoint */
        if (ep->is_in == 1) {
                dwc_otg_dev_in_ep_regs_t *in_regs =
                core_if->dev_if->in_ep_regs[0];

                gnptxsts_data_t gtxstatus;

                gtxstatus.d32 =
                        dwc_read_reg32(&core_if->core_global_regs->gnptxsts);

                if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
#ifdef DEBUG
                        deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
                        DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
                                dwc_read_reg32(&in_regs->diepctl));
                        DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
                                deptsiz.d32,
                                deptsiz.b.xfersize, deptsiz.b.pktcnt);
                        DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n",
                                  gtxstatus.d32);
#endif
                        return;
                }


                depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
                deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);

                /* Zero Length Packet? */
                if (ep->xfer_len == 0) {
                        deptsiz.b.xfersize = 0;
                        deptsiz.b.pktcnt = 1;
                }
                else {
                        /* Program the transfer size and packet count
                         *      as follows: xfersize = N * maxpacket +
                         *      short_packet pktcnt = N + (short_packet
                         *      exist ? 1 : 0)
                         */
                        if (ep->xfer_len > ep->maxpacket) {
                                ep->xfer_len = ep->maxpacket;
                                deptsiz.b.xfersize = ep->maxpacket;
                        }
                        else {
                                deptsiz.b.xfersize = ep->xfer_len;
                        }
                        deptsiz.b.pktcnt = 1;

                }
                DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
                        ep->xfer_len,
                        deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);

                /* Write the DMA register */
                if (core_if->dma_enable) {
                        if(core_if->dma_desc_enable == 0) {
                                dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);

                                dwc_write_reg32 (&(in_regs->diepdma),
                                (uint32_t)ep->dma_addr);
                        }
                        else {
                                dma_desc = core_if->dev_if->in_desc_addr;

                                /** DMA Descriptor Setup */
                                dma_desc->status.b.bs = BS_HOST_BUSY;
                                dma_desc->status.b.l = 1;
                                dma_desc->status.b.ioc = 1;
                                dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
                                dma_desc->status.b.bytes = ep->xfer_len;
                                dma_desc->buf = ep->dma_addr;
                                dma_desc->status.b.bs = BS_HOST_READY;

                                /** DIEPDMA0 Register write */
                                dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
                        }
                }
                else {
                        dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
                }

                /* EP enable, IN data in FIFO */
                depctl.b.cnak = 1;
                depctl.b.epena = 1;
                dwc_write_reg32(&in_regs->diepctl, depctl.d32);

                /**
                 * Enable the Non-Periodic Tx FIFO empty interrupt, the
                 * data will be written into the fifo by the ISR.
                 */
                if (!core_if->dma_enable) {
                        if(core_if->en_multiple_tx_fifo == 0) {
                                intr_mask.b.nptxfempty = 1;
                                dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
                                        intr_mask.d32, intr_mask.d32);
                        }
                        else {
                                /* Enable the Tx FIFO Empty Interrupt for this EP */
                                if(ep->xfer_len > 0) {
                                        uint32_t fifoemptymsk = 0;
                                        fifoemptymsk |= 1 << ep->num;
                                        dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
                                                0, fifoemptymsk);
                                }
                        }
                }
        }
        else {
                /* OUT endpoint */
                dwc_otg_dev_out_ep_regs_t *out_regs =
                        core_if->dev_if->out_ep_regs[0];

                depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
                deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);

                /* Program the transfer size and packet count as follows:
                 *      xfersize = N * (maxpacket + 4 - (maxpacket % 4))
                 *      pktcnt = N                                                                                      */
                /* Zero Length Packet */
                deptsiz.b.xfersize = ep->maxpacket;
                deptsiz.b.pktcnt = 1;

                DWC_DEBUGPL(DBG_PCDV, "len=%d  xfersize=%d pktcnt=%d\n",
                        ep->xfer_len,
                        deptsiz.b.xfersize, deptsiz.b.pktcnt);

                if (core_if->dma_enable) {
                        if(!core_if->dma_desc_enable) {
                                dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);

                                dwc_write_reg32 (&(out_regs->doepdma),
                                 (uint32_t)ep->dma_addr);
                        }
                        else {
                                dma_desc = core_if->dev_if->out_desc_addr;

                                /** DMA Descriptor Setup */
                                dma_desc->status.b.bs = BS_HOST_BUSY;
                                dma_desc->status.b.l = 1;
                                dma_desc->status.b.ioc = 1;
                                dma_desc->status.b.bytes = ep->maxpacket;
                                dma_desc->buf = ep->dma_addr;
                                dma_desc->status.b.bs = BS_HOST_READY;

                                /** DOEPDMA0 Register write */
                                dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
                        }
                }
                else {
                        dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
                }

                /* EP enable */
                depctl.b.cnak = 1;
                depctl.b.epena = 1;
                dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
        }
}

/**
 * This function continues control IN transfers started by
 * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
 * single packet.  NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
 * bit for the packet count.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP0 data.
 */
void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
        depctl_data_t depctl;
        deptsiz0_data_t deptsiz;
        gintmsk_data_t intr_mask = { .d32 = 0};
        dwc_otg_dma_desc_t* dma_desc;

        if (ep->is_in == 1) {
                dwc_otg_dev_in_ep_regs_t *in_regs =
                        core_if->dev_if->in_ep_regs[0];
                gnptxsts_data_t tx_status = { .d32 = 0 };

                tx_status.d32 = dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
                /** @todo Should there be check for room in the Tx
                 * Status Queue.  If not remove the code above this comment. */

                depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
                deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);

                /* Program the transfer size and packet count
                 *      as follows: xfersize = N * maxpacket +
                 *      short_packet pktcnt = N + (short_packet
                 *      exist ? 1 : 0)
                 */


                if(core_if->dma_desc_enable == 0) {
                        deptsiz.b.xfersize = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
                                        (ep->total_len - ep->xfer_count);
                        deptsiz.b.pktcnt = 1;
                        if(core_if->dma_enable == 0) {
                                ep->xfer_len += deptsiz.b.xfersize;
                        } else {
                                ep->xfer_len = deptsiz.b.xfersize;
                        }
                        dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
                }
                else {
                        ep->xfer_len = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
                                (ep->total_len - ep->xfer_count);

                        dma_desc = core_if->dev_if->in_desc_addr;

                        /** DMA Descriptor Setup */
                        dma_desc->status.b.bs = BS_HOST_BUSY;
                        dma_desc->status.b.l = 1;
                        dma_desc->status.b.ioc = 1;
                        dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
                        dma_desc->status.b.bytes = ep->xfer_len;
                        dma_desc->buf = ep->dma_addr;
                        dma_desc->status.b.bs = BS_HOST_READY;

                        /** DIEPDMA0 Register write */
                        dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
                }


                DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
                        ep->xfer_len,
                        deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);

                /* Write the DMA register */
                if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
                        if(core_if->dma_desc_enable == 0)
                                dwc_write_reg32 (&(in_regs->diepdma), (uint32_t)ep->dma_addr);
                }

                /* EP enable, IN data in FIFO */
                depctl.b.cnak = 1;
                depctl.b.epena = 1;
                dwc_write_reg32(&in_regs->diepctl, depctl.d32);

                /**
                 * Enable the Non-Periodic Tx FIFO empty interrupt, the
                 * data will be written into the fifo by the ISR.
                 */
                if (!core_if->dma_enable) {
                        if(core_if->en_multiple_tx_fifo == 0) {
                                /* First clear it from GINTSTS */
                                intr_mask.b.nptxfempty = 1;
                                dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
                                        intr_mask.d32, intr_mask.d32);

                        }
                        else {
                                /* Enable the Tx FIFO Empty Interrupt for this EP */
                                if(ep->xfer_len > 0) {
                                        uint32_t fifoemptymsk = 0;
                                        fifoemptymsk |= 1 << ep->num;
                                        dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
                                                0, fifoemptymsk);
                                }
                        }
                }
        }
        else {
                dwc_otg_dev_out_ep_regs_t *out_regs =
                        core_if->dev_if->out_ep_regs[0];


                depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
                deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);

                /* Program the transfer size and packet count
                 *      as follows: xfersize = N * maxpacket +
                 *      short_packet pktcnt = N + (short_packet
                 *      exist ? 1 : 0)
                 */
                deptsiz.b.xfersize = ep->maxpacket;
                deptsiz.b.pktcnt = 1;


                if(core_if->dma_desc_enable == 0) {
                        dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
                }
                else {
                        dma_desc = core_if->dev_if->out_desc_addr;

                        /** DMA Descriptor Setup */
                        dma_desc->status.b.bs = BS_HOST_BUSY;
                        dma_desc->status.b.l = 1;
                        dma_desc->status.b.ioc = 1;
                        dma_desc->status.b.bytes = ep->maxpacket;
                        dma_desc->buf = ep->dma_addr;
                        dma_desc->status.b.bs = BS_HOST_READY;

                        /** DOEPDMA0 Register write */
                        dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
                }


                DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
                        ep->xfer_len,
                        deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);

                /* Write the DMA register */
                if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
                        if(core_if->dma_desc_enable == 0)
                                dwc_write_reg32 (&(out_regs->doepdma), (uint32_t)ep->dma_addr);
                }

                /* EP enable, IN data in FIFO */
                depctl.b.cnak = 1;
                depctl.b.epena = 1;
                dwc_write_reg32(&out_regs->doepctl, depctl.d32);

        }
}

#ifdef DEBUG
void dump_msg(const u8 *buf, unsigned int length)
{
        unsigned int    start, num, i;
        char            line[52], *p;

        if (length >= 512)
                return;
        start = 0;
        while (length > 0) {
                num = min(length, 16u);
                p = line;
                for (i = 0; i < num; ++i)
                {
                        if (i == 8)
                                *p++ = ' ';
                        sprintf(p, " %02x", buf[i]);
                        p += 3;
                }
                *p = 0;
                DWC_PRINT("%6x: %s\n", start, line);
                buf += num;
                start += num;
                length -= num;
        }
}
#else
static inline void dump_msg(const u8 *buf, unsigned int length)
{
}
#endif

/**
 * This function writes a packet into the Tx FIFO associated with the
 * EP.  For non-periodic EPs the non-periodic Tx FIFO is written.  For
 * periodic EPs the periodic Tx FIFO associated with the EP is written
 * with all packets for the next micro-frame.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP to write packet for.
 * @param dma Indicates if DMA is being used.
 */
void dwc_otg_ep_write_packet(dwc_otg_core_if_t *core_if, dwc_ep_t *ep, int dma)
{
        /**
         * The buffer is padded to DWORD on a per packet basis in
         * slave/dma mode if the MPS is not DWORD aligned.      The last
         * packet, if short, is also padded to a multiple of DWORD.
         *
         * ep->xfer_buff always starts DWORD aligned in memory and is a
         * multiple of DWORD in length
         *
         * ep->xfer_len can be any number of bytes
         *
         * ep->xfer_count is a multiple of ep->maxpacket until the last
         *      packet
         *
         * FIFO access is DWORD */

        uint32_t i;
        uint32_t byte_count;
        uint32_t dword_count;
        uint32_t *fifo;
        uint32_t *data_buff = (uint32_t *)ep->xfer_buff;

        DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ep);
        if (ep->xfer_count >= ep->xfer_len) {
                        DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
                        return;
        }

        /* Find the byte length of the packet either short packet or MPS */
        if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
                byte_count = ep->xfer_len - ep->xfer_count;
        }
        else {
                byte_count = ep->maxpacket;
        }

        /* Find the DWORD length, padded by extra bytes as neccessary if MPS
         * is not a multiple of DWORD */
        dword_count =  (byte_count + 3) / 4;

#ifdef VERBOSE
        dump_msg(ep->xfer_buff, byte_count);
#endif

        /**@todo NGS Where are the Periodic Tx FIFO addresses
         * intialized?  What should this be? */

        fifo = core_if->data_fifo[ep->num];


        DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", fifo, data_buff, *data_buff, byte_count);

        if (!dma) {
                for (i=0; i<dword_count; i++, data_buff++) {
                        dwc_write_reg32(fifo, *data_buff);
                }
        }

        ep->xfer_count += byte_count;
        ep->xfer_buff += byte_count;
        ep->dma_addr += byte_count;
}

/**
 * Set the EP STALL.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP to set the stall on.
 */
void dwc_otg_ep_set_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
        depctl_data_t depctl;
        volatile uint32_t *depctl_addr;

        DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
                (ep->is_in?"IN":"OUT"));

        DWC_PRINT("%s ep%d-%s\n", __func__, ep->num,
                (ep->is_in?"in":"out"));

        if (ep->is_in == 1) {
                depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
                depctl.d32 = dwc_read_reg32(depctl_addr);

                /* set the disable and stall bits */
                if (depctl.b.epena) {
                        depctl.b.epdis = 1;
                }
                depctl.b.stall = 1;
                dwc_write_reg32(depctl_addr, depctl.d32);
        }
        else {
                depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
                depctl.d32 = dwc_read_reg32(depctl_addr);

                /* set the stall bit */
                depctl.b.stall = 1;
                dwc_write_reg32(depctl_addr, depctl.d32);
        }

        DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));

        return;
}

/**
 * Clear the EP STALL.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP to clear stall from.
 */
void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
        depctl_data_t depctl;
        volatile uint32_t *depctl_addr;

        DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
                (ep->is_in?"IN":"OUT"));

        if (ep->is_in == 1) {
                depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
        }
        else {
                depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
        }

        depctl.d32 = dwc_read_reg32(depctl_addr);

        /* clear the stall bits */
        depctl.b.stall = 0;

        /*
         * USB Spec 9.4.5: For endpoints using data toggle, regardless
         * of whether an endpoint has the Halt feature set, a
         * ClearFeature(ENDPOINT_HALT) request always results in the
         * data toggle being reinitialized to DATA0.
         */
        if (ep->type == DWC_OTG_EP_TYPE_INTR ||
                ep->type == DWC_OTG_EP_TYPE_BULK) {
                depctl.b.setd0pid = 1; /* DATA0 */
        }

        dwc_write_reg32(depctl_addr, depctl.d32);
        DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
        return;
}

/**
 * This function reads a packet from the Rx FIFO into the destination
 * buffer.      To read SETUP data use dwc_otg_read_setup_packet.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param dest    Destination buffer for the packet.
 * @param bytes  Number of bytes to copy to the destination.
 */
void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
                         uint8_t *dest,
                         uint16_t bytes)
{
        int i;
        int word_count = (bytes + 3) / 4;

        volatile uint32_t *fifo = core_if->data_fifo[0];
        uint32_t *data_buff = (uint32_t *)dest;

        /**
         * @todo Account for the case where _dest is not dword aligned. This
         * requires reading data from the FIFO into a uint32_t temp buffer,
         * then moving it into the data buffer.
         */

        DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
                                        core_if, dest, bytes);

        for (i=0; i<word_count; i++, data_buff++)
        {
                *data_buff = dwc_read_reg32(fifo);
        }

        return;
}



/**
 * This functions reads the device registers and prints them
 *
 * @param core_if Programming view of DWC_otg controller.
 */
void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *core_if)
{
        int i;
        volatile uint32_t *addr;

        DWC_PRINT("Device Global Registers\n");
        addr=&core_if->dev_if->dev_global_regs->dcfg;
        DWC_PRINT("DCFG          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->dev_if->dev_global_regs->dctl;
        DWC_PRINT("DCTL          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->dev_if->dev_global_regs->dsts;
        DWC_PRINT("DSTS          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->dev_if->dev_global_regs->diepmsk;
        DWC_PRINT("DIEPMSK       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->dev_if->dev_global_regs->doepmsk;
        DWC_PRINT("DOEPMSK       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->dev_if->dev_global_regs->daint;
        DWC_PRINT("DAINT         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->dev_if->dev_global_regs->daintmsk;
        DWC_PRINT("DAINTMSK      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->dev_if->dev_global_regs->dtknqr1;
        DWC_PRINT("DTKNQR1       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
                addr=&core_if->dev_if->dev_global_regs->dtknqr2;
                DWC_PRINT("DTKNQR2       @0x%08X : 0x%08X\n",
                  (uint32_t)addr,dwc_read_reg32(addr));
        }

        addr=&core_if->dev_if->dev_global_regs->dvbusdis;
        DWC_PRINT("DVBUSID       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));

        addr=&core_if->dev_if->dev_global_regs->dvbuspulse;
        DWC_PRINT("DVBUSPULSE   @0x%08X : 0x%08X\n",
                                  (uint32_t)addr,dwc_read_reg32(addr));

        if (core_if->hwcfg2.b.dev_token_q_depth > 14) {
                addr=&core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
                DWC_PRINT("DTKNQR3_DTHRCTL       @0x%08X : 0x%08X\n",
                  (uint32_t)addr, dwc_read_reg32(addr));
        }
/*
        if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
                addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
                DWC_PRINT("DTKNQR4       @0x%08X : 0x%08X\n",
                                  (uint32_t)addr, dwc_read_reg32(addr));
        }
*/
        addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
        DWC_PRINT("FIFOEMPMSK    @0x%08X : 0x%08X\n", (uint32_t)addr, dwc_read_reg32(addr));

        addr=&core_if->dev_if->dev_global_regs->deachint;
        DWC_PRINT("DEACHINT      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->dev_if->dev_global_regs->deachintmsk;
        DWC_PRINT("DEACHINTMSK   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));

        for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
                addr=&core_if->dev_if->dev_global_regs->diepeachintmsk[i];
                DWC_PRINT("DIEPEACHINTMSK[%d]    @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
        }


        for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
                addr=&core_if->dev_if->dev_global_regs->doepeachintmsk[i];
                DWC_PRINT("DOEPEACHINTMSK[%d]    @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
        }

        for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
                DWC_PRINT("Device IN EP %d Registers\n", i);
                addr=&core_if->dev_if->in_ep_regs[i]->diepctl;
                DWC_PRINT("DIEPCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->dev_if->in_ep_regs[i]->diepint;
                DWC_PRINT("DIEPINT       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->dev_if->in_ep_regs[i]->dieptsiz;
                DWC_PRINT("DIETSIZ       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->dev_if->in_ep_regs[i]->diepdma;
                DWC_PRINT("DIEPDMA       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->dev_if->in_ep_regs[i]->dtxfsts;
                DWC_PRINT("DTXFSTS       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->dev_if->in_ep_regs[i]->diepdmab;
                DWC_PRINT("DIEPDMAB      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        }


        for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
                DWC_PRINT("Device OUT EP %d Registers\n", i);
                addr=&core_if->dev_if->out_ep_regs[i]->doepctl;
                DWC_PRINT("DOEPCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->dev_if->out_ep_regs[i]->doepfn;
                DWC_PRINT("DOEPFN        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->dev_if->out_ep_regs[i]->doepint;
                DWC_PRINT("DOEPINT       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->dev_if->out_ep_regs[i]->doeptsiz;
                DWC_PRINT("DOETSIZ       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->dev_if->out_ep_regs[i]->doepdma;
                DWC_PRINT("DOEPDMA       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->dev_if->out_ep_regs[i]->doepdmab;
                DWC_PRINT("DOEPDMAB      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));

        }



        return;
}

/**
 * This functions reads the SPRAM and prints its content
 *
 * @param core_if Programming view of DWC_otg controller.
 */
void dwc_otg_dump_spram(dwc_otg_core_if_t *core_if)
{
        volatile uint8_t *addr, *start_addr, *end_addr;

        DWC_PRINT("SPRAM Data:\n");
        start_addr = (void*)core_if->core_global_regs;
        DWC_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
        start_addr += 0x00028000;
        end_addr=(void*)core_if->core_global_regs;
        end_addr += 0x000280e0;

        for(addr = start_addr; addr < end_addr; addr+=16)
        {
                DWC_PRINT("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", (uint32_t)addr,
                        addr[0],
                        addr[1],
                        addr[2],
                        addr[3],
                        addr[4],
                        addr[5],
                        addr[6],
                        addr[7],
                        addr[8],
                        addr[9],
                        addr[10],
                        addr[11],
                        addr[12],
                        addr[13],
                        addr[14],
                        addr[15]
                        );
        }

        return;
}
/**
 * This function reads the host registers and prints them
 *
 * @param core_if Programming view of DWC_otg controller.
 */
void dwc_otg_dump_host_registers(dwc_otg_core_if_t *core_if)
{
        int i;
        volatile uint32_t *addr;

        DWC_PRINT("Host Global Registers\n");
        addr=&core_if->host_if->host_global_regs->hcfg;
        DWC_PRINT("HCFG          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->host_if->host_global_regs->hfir;
        DWC_PRINT("HFIR          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->host_if->host_global_regs->hfnum;
        DWC_PRINT("HFNUM         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->host_if->host_global_regs->hptxsts;
        DWC_PRINT("HPTXSTS       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->host_if->host_global_regs->haint;
        DWC_PRINT("HAINT         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->host_if->host_global_regs->haintmsk;
        DWC_PRINT("HAINTMSK      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=core_if->host_if->hprt0;
        DWC_PRINT("HPRT0         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));

        for (i=0; i<core_if->core_params->host_channels; i++)
        {
                DWC_PRINT("Host Channel %d Specific Registers\n", i);
                addr=&core_if->host_if->hc_regs[i]->hcchar;
                DWC_PRINT("HCCHAR        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->host_if->hc_regs[i]->hcsplt;
                DWC_PRINT("HCSPLT        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->host_if->hc_regs[i]->hcint;
                DWC_PRINT("HCINT         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->host_if->hc_regs[i]->hcintmsk;
                DWC_PRINT("HCINTMSK      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->host_if->hc_regs[i]->hctsiz;
                DWC_PRINT("HCTSIZ        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
                addr=&core_if->host_if->hc_regs[i]->hcdma;
                DWC_PRINT("HCDMA         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        }
        return;
}

/**
 * This function reads the core global registers and prints them
 *
 * @param core_if Programming view of DWC_otg controller.
 */
void dwc_otg_dump_global_registers(dwc_otg_core_if_t *core_if)
{
        int i;
        volatile uint32_t *addr;

        DWC_PRINT("Core Global Registers\n");
        addr=&core_if->core_global_regs->gotgctl;
        DWC_PRINT("GOTGCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->gotgint;
        DWC_PRINT("GOTGINT       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->gahbcfg;
        DWC_PRINT("GAHBCFG       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->gusbcfg;
        DWC_PRINT("GUSBCFG       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->grstctl;
        DWC_PRINT("GRSTCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->gintsts;
        DWC_PRINT("GINTSTS       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->gintmsk;
        DWC_PRINT("GINTMSK       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->grxstsr;
        DWC_PRINT("GRXSTSR       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        //addr=&core_if->core_global_regs->grxstsp;
        //DWC_PRINT("GRXSTSP   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->grxfsiz;
        DWC_PRINT("GRXFSIZ       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->gnptxfsiz;
        DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->gnptxsts;
        DWC_PRINT("GNPTXSTS      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->gi2cctl;
        DWC_PRINT("GI2CCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->gpvndctl;
        DWC_PRINT("GPVNDCTL      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->ggpio;
        DWC_PRINT("GGPIO         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->guid;
        DWC_PRINT("GUID          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->gsnpsid;
        DWC_PRINT("GSNPSID       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->ghwcfg1;
        DWC_PRINT("GHWCFG1       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->ghwcfg2;
        DWC_PRINT("GHWCFG2       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->ghwcfg3;
        DWC_PRINT("GHWCFG3       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->ghwcfg4;
        DWC_PRINT("GHWCFG4       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
        addr=&core_if->core_global_regs->hptxfsiz;
        DWC_PRINT("HPTXFSIZ      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));

        for (i=0; i<core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
        {
                addr=&core_if->core_global_regs->dptxfsiz_dieptxf[i];
                DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr));
        }
}

/**
 * Flush a Tx FIFO.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param num Tx FIFO to flush.
 */
void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t *core_if,
                                           const int num)
{
        dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
        volatile grstctl_t greset = { .d32 = 0};
        int count = 0;

        DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", num);

        greset.b.txfflsh = 1;
        greset.b.txfnum = num;
        dwc_write_reg32(&global_regs->grstctl, greset.d32);

        do {
                greset.d32 = dwc_read_reg32(&global_regs->grstctl);
                if (++count > 10000) {
                        DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
                                          __func__, greset.d32,
                        dwc_read_reg32(&global_regs->gnptxsts));
                        break;
                }
        }
        while (greset.b.txfflsh == 1);

        /* Wait for 3 PHY Clocks*/
        UDELAY(1);
}

/**
 * Flush Rx FIFO.
 *
 * @param core_if Programming view of DWC_otg controller.
 */
void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t *core_if)
{
        dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
        volatile grstctl_t greset = { .d32 = 0};
        int count = 0;

        DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
        /*
         *
         */
        greset.b.rxfflsh = 1;
        dwc_write_reg32(&global_regs->grstctl, greset.d32);

        do {
                greset.d32 = dwc_read_reg32(&global_regs->grstctl);
                if (++count > 10000) {
                        DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
                                greset.d32);
                        break;
                }
        }
        while (greset.b.rxfflsh == 1);

        /* Wait for 3 PHY Clocks*/
        UDELAY(1);
}

/**
 * Do core a soft reset of the core.  Be careful with this because it
 * resets all the internal state machines of the core.
 */
void dwc_otg_core_reset(dwc_otg_core_if_t *core_if)
{
        dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
        volatile grstctl_t greset = { .d32 = 0};
        int count = 0;

        DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
        /* Wait for AHB master IDLE state. */
        do {
                UDELAY(10);
                greset.d32 = dwc_read_reg32(&global_regs->grstctl);
                if (++count > 100000) {
                        DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
                                greset.d32);
                        return;
                }
        }
        while (greset.b.ahbidle == 0);

        /* Core Soft Reset */
        count = 0;
        greset.b.csftrst = 1;
        dwc_write_reg32(&global_regs->grstctl, greset.d32);
        do {
                greset.d32 = dwc_read_reg32(&global_regs->grstctl);
                if (++count > 10000) {
                        DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
                                greset.d32);
                        break;
                }
        }
        while (greset.b.csftrst == 1);

        /* Wait for 3 PHY Clocks*/
        MDELAY(100);
}



/**
 * Register HCD callbacks.      The callbacks are used to start and stop
 * the HCD for interrupt processing.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param cb the HCD callback structure.
 * @param p pointer to be passed to callback function (usb_hcd*).
 */
void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t *core_if,
                                                dwc_otg_cil_callbacks_t *cb,
                                                void *p)
{
        core_if->hcd_cb = cb;
        cb->p = p;
}

/**
 * Register PCD callbacks.      The callbacks are used to start and stop
 * the PCD for interrupt processing.
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param cb the PCD callback structure.
 * @param p pointer to be passed to callback function (pcd*).
 */
void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t *core_if,
                                                dwc_otg_cil_callbacks_t *cb,
                                                void *p)
{
        core_if->pcd_cb = cb;
        cb->p = p;
}

#ifdef DWC_EN_ISOC

/**
 * This function writes isoc data per 1 (micro)frame into tx fifo
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP to start the transfer on.
 *
 */
void write_isoc_frame_data(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
        dwc_otg_dev_in_ep_regs_t *ep_regs;
        dtxfsts_data_t txstatus = {.d32 = 0};
        uint32_t len = 0;
        uint32_t dwords;

        ep->xfer_len = ep->data_per_frame;
        ep->xfer_count = 0;

        ep_regs = core_if->dev_if->in_ep_regs[ep->num];

        len = ep->xfer_len - ep->xfer_count;

        if (len > ep->maxpacket) {
                len = ep->maxpacket;
        }

        dwords = (len + 3)/4;

        /* While there is space in the queue and space in the FIFO and
         * More data to tranfer, Write packets to the Tx FIFO */
        txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
        DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",ep->num,txstatus.d32);

        while  (txstatus.b.txfspcavail > dwords &&
                ep->xfer_count < ep->xfer_len &&
                ep->xfer_len != 0) {
                /* Write the FIFO */
                dwc_otg_ep_write_packet(core_if, ep, 0);

                len = ep->xfer_len - ep->xfer_count;
                if (len > ep->maxpacket) {
                        len = ep->maxpacket;
                }

                dwords = (len + 3)/4;
                txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
                DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
        }
}


/**
 * This function initializes a descriptor chain for Isochronous transfer
 *
 * @param core_if Programming view of DWC_otg controller.
 * @param ep The EP to start the transfer on.
 *
 */
void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
        deptsiz_data_t          deptsiz = { .d32 = 0 };
        depctl_data_t           depctl = { .d32 = 0 };
        dsts_data_t             dsts = { .d32 = 0 };
        volatile uint32_t       *addr;

        if(ep->is_in) {
                addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
        } else {
                addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
        }

        ep->xfer_len = ep->data_per_frame;
        ep->xfer_count = 0;
        ep->xfer_buff = ep->cur_pkt_addr;
        ep->dma_addr = ep->cur_pkt_dma_addr;

        if(ep->is_in) {
                /* Program the transfer size and packet count
                 *      as follows: xfersize = N * maxpacket +
                 *      short_packet pktcnt = N + (short_packet
                 *      exist ? 1 : 0)
                 */
                deptsiz.b.xfersize = ep->xfer_len;
                deptsiz.b.pktcnt =
                        (ep->xfer_len - 1 + ep->maxpacket) /
                        ep->maxpacket;
                deptsiz.b.mc = deptsiz.b.pktcnt;
                dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);

                /* Write the DMA register */
                if (core_if->dma_enable) {
                        dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
                }
        } else {
                deptsiz.b.pktcnt =
                                (ep->xfer_len + (ep->maxpacket - 1)) /
                                ep->maxpacket;
                deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;

                dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);

                if (core_if->dma_enable) {
                                dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma),
                                        (uint32_t)ep->dma_addr);
                }
        }


        /** Enable endpoint, clear nak  */

        depctl.d32 = 0;
        if(ep->bInterval == 1) {
                dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
                ep->next_frame = dsts.b.soffn + ep->bInterval;

                if(ep->next_frame & 0x1) {
                        depctl.b.setd1pid = 1;
                } else {
                        depctl.b.setd0pid = 1;
                }
        } else {
                ep->next_frame += ep->bInterval;

                if(ep->next_frame & 0x1) {
                        depctl.b.setd1pid = 1;
                } else {
                        depctl.b.setd0pid = 1;
                }
        }
        depctl.b.epena = 1;
        depctl.b.cnak = 1;

        dwc_modify_reg32(addr, 0, depctl.d32);
        depctl.d32 = dwc_read_reg32(addr);

        if(ep->is_in && core_if->dma_enable == 0) {
                write_isoc_frame_data(core_if, ep);
        }

}

#endif //DWC_EN_ISOC