2 * crypto/ocf/talitos/talitos.c
4 * An OCF-Linux module that uses Freescale's SEC to do the crypto.
5 * Based on crypto/ocf/hifn and crypto/ocf/safe OCF drivers
7 * Copyright (c) 2006 Freescale Semiconductor, Inc.
9 * This code written by Kim A. B. Phillips <kim.phillips@freescale.com>
10 * some code copied from files with the following:
11 * Copyright (C) 2004-2007 David McCullough <david_mccullough@mcafee.com>
13 * Redistribution and use in source and binary forms, with or without
14 * modification, are permitted provided that the following conditions
17 * 1. Redistributions of source code must retain the above copyright
18 * notice, this list of conditions and the following disclaimer.
19 * 2. Redistributions in binary form must reproduce the above copyright
20 * notice, this list of conditions and the following disclaimer in the
21 * documentation and/or other materials provided with the distribution.
22 * 3. The name of the author may not be used to endorse or promote products
23 * derived from this software without specific prior written permission.
25 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
26 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
27 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
28 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
29 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
30 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
31 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
32 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
33 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
34 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 * ---------------------------------------------------------------------------
40 * The Freescale SEC (also known as 'talitos') resides on the
41 * internal bus, and runs asynchronous to the processor core. It has
42 * a wide gamut of cryptographic acceleration features, including single-
43 * pass IPsec (also known as algorithm chaining). To properly utilize
44 * all of the SEC's performance enhancing features, further reworking
45 * of higher level code (framework, applications) will be necessary.
47 * The following table shows which SEC version is present in which devices:
53 * 8555E, 8541E SEC 2.0
57 * The following table shows the features offered by each SEC version:
60 * version Bus I/F Clock nels DEU AESU AFEU MDEU PKEU RNG KEU
62 * SEC 1.0 internal 64b 100MHz 4 1 1 1 1 1 1 0
63 * SEC 1.2 internal 32b 66MHz 1 1 1 0 1 0 0 0
64 * SEC 2.0 internal 64b 166MHz 4 1 1 1 1 1 1 0
65 * SEC 2.01 internal 64b 166MHz 4 1 1 1 1 1 1 0
66 * SEC 2.1 internal 64b 333MHz 4 1 1 1 1 1 1 1
68 * Each execution unit in the SEC has two modes of execution; channel and
69 * slave/debug. This driver employs the channel infrastructure in the
70 * device for convenience. Only the RNG is directly accessed due to the
71 * convenience of its random fifo pool. The relationship between the
72 * channels and execution units is depicted in the following diagram:
74 * ------- ------------
77 * | |------+-------+-------+-------+------------
78 * ------- | | | | | | |
79 * ---| ch1 |---| | | | | | |
80 * ------- | | ------ ------ ------ ------ ------
81 * |controller| |DEU | |AESU| |MDEU| |PKEU| ... |RNG |
82 * ------- | | ------ ------ ------ ------ ------
83 * ---| ch2 |---| | | | | | |
84 * ------- | | | | | | |
85 * | |------+-------+-------+-------+------------
88 * ------- ------------
90 * Channel ch0 may drive an aes operation to the aes unit (AESU),
91 * and, at the same time, ch1 may drive a message digest operation
92 * to the mdeu. Each channel has an input descriptor FIFO, and the
93 * FIFO can contain, e.g. on the 8541E, up to 24 entries, before a
94 * a buffer overrun error is triggered. The controller is responsible
95 * for fetching the data from descriptor pointers, and passing the
96 * data to the appropriate EUs. The controller also writes the
97 * cryptographic operation's result to memory. The SEC notifies
98 * completion by triggering an interrupt and/or setting the 1st byte
99 * of the hdr field to 0xff.
102 * o support more algorithms
103 * o support more versions of the SEC
104 * o add support for linux 2.4
105 * o scatter-gather (sg) support
106 * o add support for public key ops (PKEU)
110 #ifndef AUTOCONF_INCLUDED
111 #include <linux/config.h>
113 #include <linux/module.h>
114 #include <linux/init.h>
115 #include <linux/interrupt.h>
116 #include <linux/spinlock.h>
117 #include <linux/random.h>
118 #include <linux/skbuff.h>
119 #include <asm/scatterlist.h>
120 #include <linux/dma-mapping.h> /* dma_map_single() */
121 #include <linux/moduleparam.h>
123 #include <linux/version.h>
124 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
125 #include <linux/platform_device.h>
128 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
129 #include <linux/of_platform.h>
132 #include <cryptodev.h>
135 #define DRV_NAME "talitos"
137 #include "talitos_dev.h"
138 #include "talitos_soft.h"
140 #define read_random(p,l) get_random_bytes(p,l)
142 const char talitos_driver_name
[] = "Talitos OCF";
143 const char talitos_driver_version
[] = "0.2";
145 static int talitos_newsession(device_t dev
, u_int32_t
*sidp
,
146 struct cryptoini
*cri
);
147 static int talitos_freesession(device_t dev
, u_int64_t tid
);
148 static int talitos_process(device_t dev
, struct cryptop
*crp
, int hint
);
149 static void dump_talitos_status(struct talitos_softc
*sc
);
150 static int talitos_submit(struct talitos_softc
*sc
, struct talitos_desc
*td
,
152 static void talitos_doneprocessing(struct talitos_softc
*sc
);
153 static void talitos_init_device(struct talitos_softc
*sc
);
154 static void talitos_reset_device_master(struct talitos_softc
*sc
);
155 static void talitos_reset_device(struct talitos_softc
*sc
);
156 static void talitos_errorprocessing(struct talitos_softc
*sc
);
157 #ifdef CONFIG_PPC_MERGE
158 static int talitos_probe(struct of_device
*ofdev
, const struct of_device_id
*match
);
159 static int talitos_remove(struct of_device
*ofdev
);
161 static int talitos_probe(struct platform_device
*pdev
);
162 static int talitos_remove(struct platform_device
*pdev
);
164 #ifdef CONFIG_OCF_RANDOMHARVEST
165 static int talitos_read_random(void *arg
, u_int32_t
*buf
, int maxwords
);
166 static void talitos_rng_init(struct talitos_softc
*sc
);
169 static device_method_t talitos_methods
= {
170 /* crypto device methods */
171 DEVMETHOD(cryptodev_newsession
, talitos_newsession
),
172 DEVMETHOD(cryptodev_freesession
,talitos_freesession
),
173 DEVMETHOD(cryptodev_process
, talitos_process
),
176 #define debug talitos_debug
177 int talitos_debug
= 0;
178 module_param(talitos_debug
, int, 0644);
179 MODULE_PARM_DESC(talitos_debug
, "Enable debug");
181 static inline void talitos_write(volatile unsigned *addr
, u32 val
)
186 static inline u32
talitos_read(volatile unsigned *addr
)
193 static void dump_talitos_status(struct talitos_softc
*sc
)
195 unsigned int v
, v_hi
, i
, *ptr
;
196 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_MCR
);
197 v_hi
= talitos_read(sc
->sc_base_addr
+ TALITOS_MCR_HI
);
198 printk(KERN_INFO
"%s: MCR 0x%08x_%08x\n",
199 device_get_nameunit(sc
->sc_cdev
), v
, v_hi
);
200 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_IMR
);
201 v_hi
= talitos_read(sc
->sc_base_addr
+ TALITOS_IMR_HI
);
202 printk(KERN_INFO
"%s: IMR 0x%08x_%08x\n",
203 device_get_nameunit(sc
->sc_cdev
), v
, v_hi
);
204 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_ISR
);
205 v_hi
= talitos_read(sc
->sc_base_addr
+ TALITOS_ISR_HI
);
206 printk(KERN_INFO
"%s: ISR 0x%08x_%08x\n",
207 device_get_nameunit(sc
->sc_cdev
), v
, v_hi
);
208 for (i
= 0; i
< sc
->sc_num_channels
; i
++) {
209 v
= talitos_read(sc
->sc_base_addr
+ i
*TALITOS_CH_OFFSET
+
211 v_hi
= talitos_read(sc
->sc_base_addr
+ i
*TALITOS_CH_OFFSET
+
213 printk(KERN_INFO
"%s: CDPR ch%d 0x%08x_%08x\n",
214 device_get_nameunit(sc
->sc_cdev
), i
, v
, v_hi
);
216 for (i
= 0; i
< sc
->sc_num_channels
; i
++) {
217 v
= talitos_read(sc
->sc_base_addr
+ i
*TALITOS_CH_OFFSET
+
219 v_hi
= talitos_read(sc
->sc_base_addr
+ i
*TALITOS_CH_OFFSET
+
220 TALITOS_CH_CCPSR_HI
);
221 printk(KERN_INFO
"%s: CCPSR ch%d 0x%08x_%08x\n",
222 device_get_nameunit(sc
->sc_cdev
), i
, v
, v_hi
);
224 ptr
= sc
->sc_base_addr
+ TALITOS_CH_DESCBUF
;
225 for (i
= 0; i
< 16; i
++) {
226 v
= talitos_read(ptr
++); v_hi
= talitos_read(ptr
++);
227 printk(KERN_INFO
"%s: DESCBUF ch0 0x%08x_%08x (tdp%02d)\n",
228 device_get_nameunit(sc
->sc_cdev
), v
, v_hi
, i
);
234 #ifdef CONFIG_OCF_RANDOMHARVEST
236 * pull random numbers off the RNG FIFO, not exceeding amount available
239 talitos_read_random(void *arg
, u_int32_t
*buf
, int maxwords
)
241 struct talitos_softc
*sc
= (struct talitos_softc
*) arg
;
245 DPRINTF("%s()\n", __FUNCTION__
);
247 /* check for things like FIFO underflow */
248 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_RNGISR_HI
);
250 printk(KERN_ERR
"%s: RNGISR_HI error %08x\n",
251 device_get_nameunit(sc
->sc_cdev
), v
);
255 * OFL is number of available 64-bit words,
256 * shift and convert to a 32-bit word count
258 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_RNGSR_HI
);
259 v
= (v
& TALITOS_RNGSR_HI_OFL
) >> (16 - 1);
262 for (rc
= 0; rc
< maxwords
; rc
++) {
263 buf
[rc
] = talitos_read(sc
->sc_base_addr
+
264 TALITOS_RNG_FIFO
+ rc
*sizeof(u_int32_t
));
268 * RNG will complain with an AE in the RNGISR
269 * if we don't complete the pairs of 32-bit reads
270 * to its 64-bit register based FIFO
272 v
= talitos_read(sc
->sc_base_addr
+
273 TALITOS_RNG_FIFO
+ rc
*sizeof(u_int32_t
));
280 talitos_rng_init(struct talitos_softc
*sc
)
284 DPRINTF("%s()\n", __FUNCTION__
);
286 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_RNGRCR_HI
);
287 v
|= TALITOS_RNGRCR_HI_SR
;
288 talitos_write(sc
->sc_base_addr
+ TALITOS_RNGRCR_HI
, v
);
289 while ((talitos_read(sc
->sc_base_addr
+ TALITOS_RNGSR_HI
)
290 & TALITOS_RNGSR_HI_RD
) == 0)
293 * we tell the RNG to start filling the RNG FIFO
294 * by writing the RNGDSR
296 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_RNGDSR_HI
);
297 talitos_write(sc
->sc_base_addr
+ TALITOS_RNGDSR_HI
, v
);
299 * 64 bits of data will be pushed onto the FIFO every
300 * 256 SEC cycles until the FIFO is full. The RNG then
301 * attempts to keep the FIFO full.
303 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_RNGISR_HI
);
305 printk(KERN_ERR
"%s: RNGISR_HI error %08x\n",
306 device_get_nameunit(sc
->sc_cdev
), v
);
310 * n.b. we need to add a FIPS test here - if the RNG is going
311 * to fail, it's going to fail at reset time
315 #endif /* CONFIG_OCF_RANDOMHARVEST */
318 * Generate a new software session.
321 talitos_newsession(device_t dev
, u_int32_t
*sidp
, struct cryptoini
*cri
)
323 struct cryptoini
*c
, *encini
= NULL
, *macini
= NULL
;
324 struct talitos_softc
*sc
= device_get_softc(dev
);
325 struct talitos_session
*ses
= NULL
;
328 DPRINTF("%s()\n", __FUNCTION__
);
329 if (sidp
== NULL
|| cri
== NULL
|| sc
== NULL
) {
330 DPRINTF("%s,%d - EINVAL\n", __FILE__
, __LINE__
);
333 for (c
= cri
; c
!= NULL
; c
= c
->cri_next
) {
334 if (c
->cri_alg
== CRYPTO_MD5
||
335 c
->cri_alg
== CRYPTO_MD5_HMAC
||
336 c
->cri_alg
== CRYPTO_SHA1
||
337 c
->cri_alg
== CRYPTO_SHA1_HMAC
||
338 c
->cri_alg
== CRYPTO_NULL_HMAC
) {
342 } else if (c
->cri_alg
== CRYPTO_DES_CBC
||
343 c
->cri_alg
== CRYPTO_3DES_CBC
||
344 c
->cri_alg
== CRYPTO_AES_CBC
||
345 c
->cri_alg
== CRYPTO_NULL_CBC
) {
350 DPRINTF("UNKNOWN c->cri_alg %d\n", encini
->cri_alg
);
354 if (encini
== NULL
&& macini
== NULL
)
357 /* validate key length */
358 switch (encini
->cri_alg
) {
360 if (encini
->cri_klen
!= 64)
363 case CRYPTO_3DES_CBC
:
364 if (encini
->cri_klen
!= 192) {
369 if (encini
->cri_klen
!= 128 &&
370 encini
->cri_klen
!= 192 &&
371 encini
->cri_klen
!= 256)
375 DPRINTF("UNKNOWN encini->cri_alg %d\n",
381 if (sc
->sc_sessions
== NULL
) {
382 ses
= sc
->sc_sessions
= (struct talitos_session
*)
383 kmalloc(sizeof(struct talitos_session
), SLAB_ATOMIC
);
386 memset(ses
, 0, sizeof(struct talitos_session
));
388 sc
->sc_nsessions
= 1;
390 for (sesn
= 0; sesn
< sc
->sc_nsessions
; sesn
++) {
391 if (sc
->sc_sessions
[sesn
].ses_used
== 0) {
392 ses
= &sc
->sc_sessions
[sesn
];
398 /* allocating session */
399 sesn
= sc
->sc_nsessions
;
400 ses
= (struct talitos_session
*) kmalloc(
401 (sesn
+ 1) * sizeof(struct talitos_session
),
406 (sesn
+ 1) * sizeof(struct talitos_session
));
407 memcpy(ses
, sc
->sc_sessions
,
408 sesn
* sizeof(struct talitos_session
));
409 memset(sc
->sc_sessions
, 0,
410 sesn
* sizeof(struct talitos_session
));
411 kfree(sc
->sc_sessions
);
412 sc
->sc_sessions
= ses
;
413 ses
= &sc
->sc_sessions
[sesn
];
422 /* XXX may read fewer than requested */
423 read_random(ses
->ses_iv
, sizeof(ses
->ses_iv
));
425 ses
->ses_klen
= (encini
->cri_klen
+ 7) / 8;
426 memcpy(ses
->ses_key
, encini
->cri_key
, ses
->ses_klen
);
428 /* doing hash on top of cipher */
429 ses
->ses_hmac_len
= (macini
->cri_klen
+ 7) / 8;
430 memcpy(ses
->ses_hmac
, macini
->cri_key
,
435 ses
->ses_klen
= (macini
->cri_klen
+ 7) / 8;
436 memcpy(ses
->ses_key
, macini
->cri_key
, ses
->ses_klen
);
439 /* back compat way of determining MSC result len */
441 ses
->ses_mlen
= macini
->cri_mlen
;
442 if (ses
->ses_mlen
== 0) {
443 if (macini
->cri_alg
== CRYPTO_MD5_HMAC
)
444 ses
->ses_mlen
= MD5_HASH_LEN
;
446 ses
->ses_mlen
= SHA1_HASH_LEN
;
450 /* really should make up a template td here,
451 * and only fill things like i/o and direction in process() */
453 /* assign session ID */
454 *sidp
= TALITOS_SID(sc
->sc_num
, sesn
);
459 * Deallocate a session.
462 talitos_freesession(device_t dev
, u_int64_t tid
)
464 struct talitos_softc
*sc
= device_get_softc(dev
);
466 u_int32_t sid
= ((u_int32_t
) tid
) & 0xffffffff;
470 session
= TALITOS_SESSION(sid
);
471 if (session
< sc
->sc_nsessions
) {
472 memset(&sc
->sc_sessions
[session
], 0,
473 sizeof(sc
->sc_sessions
[session
]));
481 * launch device processing - it will come back with done notification
482 * in the form of an interrupt and/or HDR_DONE_BITS in header
486 struct talitos_softc
*sc
,
487 struct talitos_desc
*td
,
492 v
= dma_map_single(NULL
, td
, sizeof(*td
), DMA_TO_DEVICE
);
493 talitos_write(sc
->sc_base_addr
+
494 chsel
*TALITOS_CH_OFFSET
+ TALITOS_CH_FF
, 0);
495 talitos_write(sc
->sc_base_addr
+
496 chsel
*TALITOS_CH_OFFSET
+ TALITOS_CH_FF_HI
, v
);
501 talitos_process(device_t dev
, struct cryptop
*crp
, int hint
)
503 int i
, err
= 0, ivsize
;
504 struct talitos_softc
*sc
= device_get_softc(dev
);
505 struct cryptodesc
*crd1
, *crd2
, *maccrd
, *enccrd
;
507 struct talitos_session
*ses
;
508 struct talitos_desc
*td
;
510 /* descriptor mappings */
511 int hmac_key
, hmac_data
, cipher_iv
, cipher_key
,
512 in_fifo
, out_fifo
, cipher_iv_out
;
513 static int chsel
= -1;
515 DPRINTF("%s()\n", __FUNCTION__
);
517 if (crp
== NULL
|| crp
->crp_callback
== NULL
|| sc
== NULL
) {
521 if (TALITOS_SESSION(crp
->crp_sid
) >= sc
->sc_nsessions
) {
525 ses
= &sc
->sc_sessions
[TALITOS_SESSION(crp
->crp_sid
)];
527 /* enter the channel scheduler */
528 spin_lock_irqsave(&sc
->sc_chnfifolock
[sc
->sc_num_channels
], flags
);
530 /* reuse channel that already had/has requests for the required EU */
531 for (i
= 0; i
< sc
->sc_num_channels
; i
++) {
532 if (sc
->sc_chnlastalg
[i
] == crp
->crp_desc
->crd_alg
)
535 if (i
== sc
->sc_num_channels
) {
537 * haven't seen this algo the last sc_num_channels or more
538 * use round robin in this case
539 * nb: sc->sc_num_channels must be power of 2
541 chsel
= (chsel
+ 1) & (sc
->sc_num_channels
- 1);
544 * matches channel with same target execution unit;
545 * use same channel in this case
549 sc
->sc_chnlastalg
[chsel
] = crp
->crp_desc
->crd_alg
;
551 /* release the channel scheduler lock */
552 spin_unlock_irqrestore(&sc
->sc_chnfifolock
[sc
->sc_num_channels
], flags
);
554 /* acquire the selected channel fifo lock */
555 spin_lock_irqsave(&sc
->sc_chnfifolock
[chsel
], flags
);
557 /* find and reserve next available descriptor-cryptop pair */
558 for (i
= 0; i
< sc
->sc_chfifo_len
; i
++) {
559 if (sc
->sc_chnfifo
[chsel
][i
].cf_desc
.hdr
== 0) {
561 * ensure correct descriptor formation by
562 * avoiding inadvertently setting "optional" entries
563 * e.g. not using "optional" dptr2 for MD/HMAC descs
565 memset(&sc
->sc_chnfifo
[chsel
][i
].cf_desc
,
567 /* reserve it with done notification request bit */
568 sc
->sc_chnfifo
[chsel
][i
].cf_desc
.hdr
|=
573 spin_unlock_irqrestore(&sc
->sc_chnfifolock
[chsel
], flags
);
575 if (i
== sc
->sc_chfifo_len
) {
581 td
= &sc
->sc_chnfifo
[chsel
][i
].cf_desc
;
582 sc
->sc_chnfifo
[chsel
][i
].cf_crp
= crp
;
584 crd1
= crp
->crp_desc
;
589 crd2
= crd1
->crd_next
;
590 /* prevent compiler warning */
594 td
->hdr
|= TD_TYPE_COMMON_NONSNOOP_NO_AFEU
;
595 /* assign descriptor dword ptr mappings for this desc. type */
600 if (crd1
->crd_alg
== CRYPTO_MD5_HMAC
||
601 crd1
->crd_alg
== CRYPTO_SHA1_HMAC
||
602 crd1
->crd_alg
== CRYPTO_SHA1
||
603 crd1
->crd_alg
== CRYPTO_MD5
) {
607 } else if (crd1
->crd_alg
== CRYPTO_DES_CBC
||
608 crd1
->crd_alg
== CRYPTO_3DES_CBC
||
609 crd1
->crd_alg
== CRYPTO_AES_CBC
||
610 crd1
->crd_alg
== CRYPTO_ARC4
) {
615 DPRINTF("UNKNOWN crd1->crd_alg %d\n", crd1
->crd_alg
);
620 if (sc
->sc_desc_types
& TALITOS_HAS_DT_IPSEC_ESP
) {
621 td
->hdr
|= TD_TYPE_IPSEC_ESP
;
623 DPRINTF("unimplemented: multiple descriptor ipsec\n");
627 /* assign descriptor dword ptr mappings for this desc. type */
635 if ((crd1
->crd_alg
== CRYPTO_MD5_HMAC
||
636 crd1
->crd_alg
== CRYPTO_SHA1_HMAC
||
637 crd1
->crd_alg
== CRYPTO_MD5
||
638 crd1
->crd_alg
== CRYPTO_SHA1
) &&
639 (crd2
->crd_alg
== CRYPTO_DES_CBC
||
640 crd2
->crd_alg
== CRYPTO_3DES_CBC
||
641 crd2
->crd_alg
== CRYPTO_AES_CBC
||
642 crd2
->crd_alg
== CRYPTO_ARC4
) &&
643 ((crd2
->crd_flags
& CRD_F_ENCRYPT
) == 0)) {
646 } else if ((crd1
->crd_alg
== CRYPTO_DES_CBC
||
647 crd1
->crd_alg
== CRYPTO_ARC4
||
648 crd1
->crd_alg
== CRYPTO_3DES_CBC
||
649 crd1
->crd_alg
== CRYPTO_AES_CBC
) &&
650 (crd2
->crd_alg
== CRYPTO_MD5_HMAC
||
651 crd2
->crd_alg
== CRYPTO_SHA1_HMAC
||
652 crd2
->crd_alg
== CRYPTO_MD5
||
653 crd2
->crd_alg
== CRYPTO_SHA1
) &&
654 (crd1
->crd_flags
& CRD_F_ENCRYPT
)) {
658 /* We cannot order the SEC as requested */
659 printk("%s: cannot do the order\n",
660 device_get_nameunit(sc
->sc_cdev
));
665 /* assign in_fifo and out_fifo based on input/output struct type */
666 if (crp
->crp_flags
& CRYPTO_F_SKBUF
) {
667 /* using SKB buffers */
668 struct sk_buff
*skb
= (struct sk_buff
*)crp
->crp_buf
;
669 if (skb_shinfo(skb
)->nr_frags
) {
670 printk("%s: skb frags unimplemented\n",
671 device_get_nameunit(sc
->sc_cdev
));
675 td
->ptr
[in_fifo
].ptr
= dma_map_single(NULL
, skb
->data
,
676 skb
->len
, DMA_TO_DEVICE
);
677 td
->ptr
[in_fifo
].len
= skb
->len
;
678 td
->ptr
[out_fifo
].ptr
= dma_map_single(NULL
, skb
->data
,
679 skb
->len
, DMA_TO_DEVICE
);
680 td
->ptr
[out_fifo
].len
= skb
->len
;
681 td
->ptr
[hmac_data
].ptr
= dma_map_single(NULL
, skb
->data
,
682 skb
->len
, DMA_TO_DEVICE
);
683 } else if (crp
->crp_flags
& CRYPTO_F_IOV
) {
684 /* using IOV buffers */
685 struct uio
*uiop
= (struct uio
*)crp
->crp_buf
;
686 if (uiop
->uio_iovcnt
> 1) {
687 printk("%s: iov frags unimplemented\n",
688 device_get_nameunit(sc
->sc_cdev
));
692 td
->ptr
[in_fifo
].ptr
= dma_map_single(NULL
,
693 uiop
->uio_iov
->iov_base
, crp
->crp_ilen
, DMA_TO_DEVICE
);
694 td
->ptr
[in_fifo
].len
= crp
->crp_ilen
;
695 /* crp_olen is never set; always use crp_ilen */
696 td
->ptr
[out_fifo
].ptr
= dma_map_single(NULL
,
697 uiop
->uio_iov
->iov_base
,
698 crp
->crp_ilen
, DMA_TO_DEVICE
);
699 td
->ptr
[out_fifo
].len
= crp
->crp_ilen
;
701 /* using contig buffers */
702 td
->ptr
[in_fifo
].ptr
= dma_map_single(NULL
,
703 crp
->crp_buf
, crp
->crp_ilen
, DMA_TO_DEVICE
);
704 td
->ptr
[in_fifo
].len
= crp
->crp_ilen
;
705 td
->ptr
[out_fifo
].ptr
= dma_map_single(NULL
,
706 crp
->crp_buf
, crp
->crp_ilen
, DMA_TO_DEVICE
);
707 td
->ptr
[out_fifo
].len
= crp
->crp_ilen
;
710 switch (enccrd
->crd_alg
) {
711 case CRYPTO_3DES_CBC
:
712 td
->hdr
|= TALITOS_MODE0_DEU_3DES
;
715 td
->hdr
|= TALITOS_SEL0_DEU
716 | TALITOS_MODE0_DEU_CBC
;
717 if (enccrd
->crd_flags
& CRD_F_ENCRYPT
)
718 td
->hdr
|= TALITOS_MODE0_DEU_ENC
;
719 ivsize
= 2*sizeof(u_int32_t
);
720 DPRINTF("%cDES ses %d ch %d len %d\n",
721 (td
->hdr
& TALITOS_MODE0_DEU_3DES
)?'3':'1',
722 (u32
)TALITOS_SESSION(crp
->crp_sid
),
723 chsel
, td
->ptr
[in_fifo
].len
);
726 td
->hdr
|= TALITOS_SEL0_AESU
727 | TALITOS_MODE0_AESU_CBC
;
728 if (enccrd
->crd_flags
& CRD_F_ENCRYPT
)
729 td
->hdr
|= TALITOS_MODE0_AESU_ENC
;
730 ivsize
= 4*sizeof(u_int32_t
);
731 DPRINTF("AES ses %d ch %d len %d\n",
732 (u32
)TALITOS_SESSION(crp
->crp_sid
),
733 chsel
, td
->ptr
[in_fifo
].len
);
736 printk("%s: unimplemented enccrd->crd_alg %d\n",
737 device_get_nameunit(sc
->sc_cdev
), enccrd
->crd_alg
);
742 * Setup encrypt/decrypt state. When using basic ops
743 * we can't use an inline IV because hash/crypt offset
744 * must be from the end of the IV to the start of the
745 * crypt data and this leaves out the preceding header
746 * from the hash calculation. Instead we place the IV
747 * in the state record and set the hash/crypt offset to
748 * copy both the header+IV.
750 if (enccrd
->crd_flags
& CRD_F_ENCRYPT
) {
751 td
->hdr
|= TALITOS_DIR_OUTBOUND
;
752 if (enccrd
->crd_flags
& CRD_F_IV_EXPLICIT
)
755 iv
= (caddr_t
) ses
->ses_iv
;
756 if ((enccrd
->crd_flags
& CRD_F_IV_PRESENT
) == 0) {
757 crypto_copyback(crp
->crp_flags
, crp
->crp_buf
,
758 enccrd
->crd_inject
, ivsize
, iv
);
761 td
->hdr
|= TALITOS_DIR_INBOUND
;
762 if (enccrd
->crd_flags
& CRD_F_IV_EXPLICIT
) {
764 bcopy(enccrd
->crd_iv
, iv
, ivsize
);
766 iv
= (caddr_t
) ses
->ses_iv
;
767 crypto_copydata(crp
->crp_flags
, crp
->crp_buf
,
768 enccrd
->crd_inject
, ivsize
, iv
);
771 td
->ptr
[cipher_iv
].ptr
= dma_map_single(NULL
, iv
, ivsize
,
773 td
->ptr
[cipher_iv
].len
= ivsize
;
775 * we don't need the cipher iv out length/pointer
776 * field to do ESP IPsec. Therefore we set the len field as 0,
777 * which tells the SEC not to do anything with this len/ptr
778 * field. Previously, when length/pointer as pointing to iv,
779 * it gave us corruption of packets.
781 td
->ptr
[cipher_iv_out
].len
= 0;
783 if (enccrd
&& maccrd
) {
784 /* this is ipsec only for now */
785 td
->hdr
|= TALITOS_SEL1_MDEU
786 | TALITOS_MODE1_MDEU_INIT
787 | TALITOS_MODE1_MDEU_PAD
;
788 switch (maccrd
->crd_alg
) {
790 td
->hdr
|= TALITOS_MODE1_MDEU_MD5
;
792 case CRYPTO_MD5_HMAC
:
793 td
->hdr
|= TALITOS_MODE1_MDEU_MD5_HMAC
;
796 td
->hdr
|= TALITOS_MODE1_MDEU_SHA1
;
798 case CRYPTO_SHA1_HMAC
:
799 td
->hdr
|= TALITOS_MODE1_MDEU_SHA1_HMAC
;
802 /* We cannot order the SEC as requested */
803 printk("%s: cannot do the order\n",
804 device_get_nameunit(sc
->sc_cdev
));
808 if ((maccrd
->crd_alg
== CRYPTO_MD5_HMAC
) ||
809 (maccrd
->crd_alg
== CRYPTO_SHA1_HMAC
)) {
811 * The offset from hash data to the start of
812 * crypt data is the difference in the skips.
814 /* ipsec only for now */
815 td
->ptr
[hmac_key
].ptr
= dma_map_single(NULL
,
816 ses
->ses_hmac
, ses
->ses_hmac_len
, DMA_TO_DEVICE
);
817 td
->ptr
[hmac_key
].len
= ses
->ses_hmac_len
;
818 td
->ptr
[in_fifo
].ptr
+= enccrd
->crd_skip
;
819 td
->ptr
[in_fifo
].len
= enccrd
->crd_len
;
820 td
->ptr
[out_fifo
].ptr
+= enccrd
->crd_skip
;
821 td
->ptr
[out_fifo
].len
= enccrd
->crd_len
;
822 /* bytes of HMAC to postpend to ciphertext */
823 td
->ptr
[out_fifo
].extent
= ses
->ses_mlen
;
824 td
->ptr
[hmac_data
].ptr
+= maccrd
->crd_skip
;
825 td
->ptr
[hmac_data
].len
= enccrd
->crd_skip
- maccrd
->crd_skip
;
827 if (enccrd
->crd_flags
& CRD_F_KEY_EXPLICIT
) {
828 printk("%s: CRD_F_KEY_EXPLICIT unimplemented\n",
829 device_get_nameunit(sc
->sc_cdev
));
832 if (!enccrd
&& maccrd
) {
833 /* single MD5 or SHA */
834 td
->hdr
|= TALITOS_SEL0_MDEU
835 | TALITOS_MODE0_MDEU_INIT
836 | TALITOS_MODE0_MDEU_PAD
;
837 switch (maccrd
->crd_alg
) {
839 td
->hdr
|= TALITOS_MODE0_MDEU_MD5
;
840 DPRINTF("MD5 ses %d ch %d len %d\n",
841 (u32
)TALITOS_SESSION(crp
->crp_sid
),
842 chsel
, td
->ptr
[in_fifo
].len
);
844 case CRYPTO_MD5_HMAC
:
845 td
->hdr
|= TALITOS_MODE0_MDEU_MD5_HMAC
;
848 td
->hdr
|= TALITOS_MODE0_MDEU_SHA1
;
849 DPRINTF("SHA1 ses %d ch %d len %d\n",
850 (u32
)TALITOS_SESSION(crp
->crp_sid
),
851 chsel
, td
->ptr
[in_fifo
].len
);
853 case CRYPTO_SHA1_HMAC
:
854 td
->hdr
|= TALITOS_MODE0_MDEU_SHA1_HMAC
;
857 /* We cannot order the SEC as requested */
858 DPRINTF("cannot do the order\n");
863 if (crp
->crp_flags
& CRYPTO_F_IOV
)
864 td
->ptr
[out_fifo
].ptr
+= maccrd
->crd_inject
;
866 if ((maccrd
->crd_alg
== CRYPTO_MD5_HMAC
) ||
867 (maccrd
->crd_alg
== CRYPTO_SHA1_HMAC
)) {
868 td
->ptr
[hmac_key
].ptr
= dma_map_single(NULL
,
869 ses
->ses_hmac
, ses
->ses_hmac_len
,
871 td
->ptr
[hmac_key
].len
= ses
->ses_hmac_len
;
875 /* using process key (session data has duplicate) */
876 td
->ptr
[cipher_key
].ptr
= dma_map_single(NULL
,
877 enccrd
->crd_key
, (enccrd
->crd_klen
+ 7) / 8,
879 td
->ptr
[cipher_key
].len
= (enccrd
->crd_klen
+ 7) / 8;
881 /* descriptor complete - GO! */
882 return talitos_submit(sc
, td
, chsel
);
885 if (err
!= ERESTART
) {
886 crp
->crp_etype
= err
;
892 /* go through all channels descriptors, notifying OCF what has
893 * _and_hasn't_ successfully completed and reset the device
894 * (otherwise it's up to decoding desc hdrs!)
896 static void talitos_errorprocessing(struct talitos_softc
*sc
)
901 /* disable further scheduling until under control */
902 spin_lock_irqsave(&sc
->sc_chnfifolock
[sc
->sc_num_channels
], flags
);
904 if (debug
) dump_talitos_status(sc
);
905 /* go through descriptors, try and salvage those successfully done,
906 * and EIO those that weren't
908 for (i
= 0; i
< sc
->sc_num_channels
; i
++) {
909 spin_lock_irqsave(&sc
->sc_chnfifolock
[i
], flags
);
910 for (j
= 0; j
< sc
->sc_chfifo_len
; j
++) {
911 if (sc
->sc_chnfifo
[i
][j
].cf_desc
.hdr
) {
912 if ((sc
->sc_chnfifo
[i
][j
].cf_desc
.hdr
913 & TALITOS_HDR_DONE_BITS
)
914 != TALITOS_HDR_DONE_BITS
) {
915 /* this one didn't finish */
916 /* signify in crp->etype */
917 sc
->sc_chnfifo
[i
][j
].cf_crp
->crp_etype
921 continue; /* free entry */
922 /* either way, notify ocf */
923 crypto_done(sc
->sc_chnfifo
[i
][j
].cf_crp
);
924 /* and tag it available again
926 * memset to ensure correct descriptor formation by
927 * avoiding inadvertently setting "optional" entries
928 * e.g. not using "optional" dptr2 MD/HMAC processing
930 memset(&sc
->sc_chnfifo
[i
][j
].cf_desc
,
931 0, sizeof(struct talitos_desc
));
933 spin_unlock_irqrestore(&sc
->sc_chnfifolock
[i
], flags
);
935 /* reset and initialize the SEC h/w device */
936 talitos_reset_device(sc
);
937 talitos_init_device(sc
);
938 #ifdef CONFIG_OCF_RANDOMHARVEST
939 if (sc
->sc_exec_units
& TALITOS_HAS_EU_RNG
)
940 talitos_rng_init(sc
);
943 /* Okay. Stand by. */
944 spin_unlock_irqrestore(&sc
->sc_chnfifolock
[sc
->sc_num_channels
], flags
);
949 /* go through all channels descriptors, notifying OCF what's been done */
950 static void talitos_doneprocessing(struct talitos_softc
*sc
)
955 /* go through descriptors looking for done bits */
956 for (i
= 0; i
< sc
->sc_num_channels
; i
++) {
957 spin_lock_irqsave(&sc
->sc_chnfifolock
[i
], flags
);
958 for (j
= 0; j
< sc
->sc_chfifo_len
; j
++) {
959 /* descriptor has done bits set? */
960 if ((sc
->sc_chnfifo
[i
][j
].cf_desc
.hdr
961 & TALITOS_HDR_DONE_BITS
)
962 == TALITOS_HDR_DONE_BITS
) {
964 crypto_done(sc
->sc_chnfifo
[i
][j
].cf_crp
);
965 /* and tag it available again
967 * memset to ensure correct descriptor formation by
968 * avoiding inadvertently setting "optional" entries
969 * e.g. not using "optional" dptr2 MD/HMAC processing
971 memset(&sc
->sc_chnfifo
[i
][j
].cf_desc
,
972 0, sizeof(struct talitos_desc
));
975 spin_unlock_irqrestore(&sc
->sc_chnfifolock
[i
], flags
);
981 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
982 talitos_intr(int irq
, void *arg
)
984 talitos_intr(int irq
, void *arg
, struct pt_regs
*regs
)
987 struct talitos_softc
*sc
= arg
;
991 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_ISR
);
992 v_hi
= talitos_read(sc
->sc_base_addr
+ TALITOS_ISR_HI
);
993 talitos_write(sc
->sc_base_addr
+ TALITOS_ICR
, v
);
994 talitos_write(sc
->sc_base_addr
+ TALITOS_ICR_HI
, v_hi
);
996 if (unlikely(v
& TALITOS_ISR_ERROR
)) {
997 /* Okay, Houston, we've had a problem here. */
998 printk(KERN_DEBUG
"%s: got error interrupt - ISR 0x%08x_%08x\n",
999 device_get_nameunit(sc
->sc_cdev
), v
, v_hi
);
1000 talitos_errorprocessing(sc
);
1002 if (likely(v
& TALITOS_ISR_DONE
)) {
1003 talitos_doneprocessing(sc
);
1009 * Initialize registers we need to touch only once.
1012 talitos_init_device(struct talitos_softc
*sc
)
1017 DPRINTF("%s()\n", __FUNCTION__
);
1019 /* init all channels */
1020 for (i
= 0; i
< sc
->sc_num_channels
; i
++) {
1021 v
= talitos_read(sc
->sc_base_addr
+
1022 i
*TALITOS_CH_OFFSET
+ TALITOS_CH_CCCR_HI
);
1023 v
|= TALITOS_CH_CCCR_HI_CDWE
1024 | TALITOS_CH_CCCR_HI_CDIE
; /* invoke interrupt if done */
1025 talitos_write(sc
->sc_base_addr
+
1026 i
*TALITOS_CH_OFFSET
+ TALITOS_CH_CCCR_HI
, v
);
1028 /* enable all interrupts */
1029 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_IMR
);
1030 v
|= TALITOS_IMR_ALL
;
1031 talitos_write(sc
->sc_base_addr
+ TALITOS_IMR
, v
);
1032 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_IMR_HI
);
1033 v
|= TALITOS_IMR_HI_ERRONLY
;
1034 talitos_write(sc
->sc_base_addr
+ TALITOS_IMR_HI
, v
);
1039 * set the master reset bit on the device.
1042 talitos_reset_device_master(struct talitos_softc
*sc
)
1046 /* Reset the device by writing 1 to MCR:SWR and waiting 'til cleared */
1047 v
= talitos_read(sc
->sc_base_addr
+ TALITOS_MCR
);
1048 talitos_write(sc
->sc_base_addr
+ TALITOS_MCR
, v
| TALITOS_MCR_SWR
);
1050 while (talitos_read(sc
->sc_base_addr
+ TALITOS_MCR
) & TALITOS_MCR_SWR
)
1057 * Resets the device. Values in the registers are left as is
1058 * from the reset (i.e. initial values are assigned elsewhere).
1061 talitos_reset_device(struct talitos_softc
*sc
)
1066 DPRINTF("%s()\n", __FUNCTION__
);
1070 * errata documentation: warning: certain SEC interrupts
1071 * are not fully cleared by writing the MCR:SWR bit,
1072 * set bit twice to completely reset
1074 talitos_reset_device_master(sc
); /* once */
1075 talitos_reset_device_master(sc
); /* and once again */
1077 /* reset all channels */
1078 for (i
= 0; i
< sc
->sc_num_channels
; i
++) {
1079 v
= talitos_read(sc
->sc_base_addr
+ i
*TALITOS_CH_OFFSET
+
1081 talitos_write(sc
->sc_base_addr
+ i
*TALITOS_CH_OFFSET
+
1082 TALITOS_CH_CCCR
, v
| TALITOS_CH_CCCR_RESET
);
1086 /* Set up the crypto device structure, private data,
1087 * and anything else we need before we start */
1088 #ifdef CONFIG_PPC_MERGE
1089 static int talitos_probe(struct of_device
*ofdev
, const struct of_device_id
*match
)
1091 static int talitos_probe(struct platform_device
*pdev
)
1094 struct talitos_softc
*sc
= NULL
;
1096 #ifdef CONFIG_PPC_MERGE
1097 struct device
*device
= &ofdev
->dev
;
1098 struct device_node
*np
= ofdev
->node
;
1099 const unsigned int *prop
;
1101 struct resource res
;
1103 static int num_chips
= 0;
1107 DPRINTF("%s()\n", __FUNCTION__
);
1109 sc
= (struct talitos_softc
*) kmalloc(sizeof(*sc
), GFP_KERNEL
);
1112 memset(sc
, 0, sizeof(*sc
));
1114 softc_device_init(sc
, DRV_NAME
, num_chips
, talitos_methods
);
1118 #ifndef CONFIG_PPC_MERGE
1121 sc
->sc_num
= num_chips
++;
1123 #ifdef CONFIG_PPC_MERGE
1124 dev_set_drvdata(device
, sc
);
1126 platform_set_drvdata(sc
->sc_dev
, sc
);
1129 /* get the irq line */
1130 #ifdef CONFIG_PPC_MERGE
1131 err
= of_address_to_resource(np
, 0, &res
);
1136 sc
->sc_irq
= irq_of_parse_and_map(np
, 0);
1138 /* get a pointer to the register memory */
1139 r
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
1141 sc
->sc_irq
= platform_get_irq(pdev
, 0);
1143 rc
= request_irq(sc
->sc_irq
, talitos_intr
, 0,
1144 device_get_nameunit(sc
->sc_cdev
), sc
);
1146 printk(KERN_ERR
"%s: failed to hook irq %d\n",
1147 device_get_nameunit(sc
->sc_cdev
), sc
->sc_irq
);
1152 sc
->sc_base_addr
= (ocf_iomem_t
) ioremap(r
->start
, (r
->end
- r
->start
));
1153 if (!sc
->sc_base_addr
) {
1154 printk(KERN_ERR
"%s: failed to ioremap\n",
1155 device_get_nameunit(sc
->sc_cdev
));
1159 /* figure out our SEC's properties and capabilities */
1160 sc
->sc_chiprev
= (u64
)talitos_read(sc
->sc_base_addr
+ TALITOS_ID
) << 32
1161 | talitos_read(sc
->sc_base_addr
+ TALITOS_ID_HI
);
1162 DPRINTF("sec id 0x%llx\n", sc
->sc_chiprev
);
1164 #ifdef CONFIG_PPC_MERGE
1165 /* get SEC properties from device tree, defaulting to SEC 2.0 */
1167 prop
= of_get_property(np
, "num-channels", NULL
);
1168 sc
->sc_num_channels
= prop
? *prop
: TALITOS_NCHANNELS_SEC_2_0
;
1170 prop
= of_get_property(np
, "channel-fifo-len", NULL
);
1171 sc
->sc_chfifo_len
= prop
? *prop
: TALITOS_CHFIFOLEN_SEC_2_0
;
1173 prop
= of_get_property(np
, "exec-units-mask", NULL
);
1174 sc
->sc_exec_units
= prop
? *prop
: TALITOS_HAS_EUS_SEC_2_0
;
1176 prop
= of_get_property(np
, "descriptor-types-mask", NULL
);
1177 sc
->sc_desc_types
= prop
? *prop
: TALITOS_HAS_DESCTYPES_SEC_2_0
;
1179 /* bulk should go away with openfirmware flat device tree support */
1180 if (sc
->sc_chiprev
& TALITOS_ID_SEC_2_0
) {
1181 sc
->sc_num_channels
= TALITOS_NCHANNELS_SEC_2_0
;
1182 sc
->sc_chfifo_len
= TALITOS_CHFIFOLEN_SEC_2_0
;
1183 sc
->sc_exec_units
= TALITOS_HAS_EUS_SEC_2_0
;
1184 sc
->sc_desc_types
= TALITOS_HAS_DESCTYPES_SEC_2_0
;
1186 printk(KERN_ERR
"%s: failed to id device\n",
1187 device_get_nameunit(sc
->sc_cdev
));
1192 /* + 1 is for the meta-channel lock used by the channel scheduler */
1193 sc
->sc_chnfifolock
= (spinlock_t
*) kmalloc(
1194 (sc
->sc_num_channels
+ 1) * sizeof(spinlock_t
), GFP_KERNEL
);
1195 if (!sc
->sc_chnfifolock
)
1197 for (i
= 0; i
< sc
->sc_num_channels
+ 1; i
++) {
1198 spin_lock_init(&sc
->sc_chnfifolock
[i
]);
1201 sc
->sc_chnlastalg
= (int *) kmalloc(
1202 sc
->sc_num_channels
* sizeof(int), GFP_KERNEL
);
1203 if (!sc
->sc_chnlastalg
)
1205 memset(sc
->sc_chnlastalg
, 0, sc
->sc_num_channels
* sizeof(int));
1207 sc
->sc_chnfifo
= (struct desc_cryptop_pair
**) kmalloc(
1208 sc
->sc_num_channels
* sizeof(struct desc_cryptop_pair
*),
1210 if (!sc
->sc_chnfifo
)
1212 for (i
= 0; i
< sc
->sc_num_channels
; i
++) {
1213 sc
->sc_chnfifo
[i
] = (struct desc_cryptop_pair
*) kmalloc(
1214 sc
->sc_chfifo_len
* sizeof(struct desc_cryptop_pair
),
1216 if (!sc
->sc_chnfifo
[i
])
1218 memset(sc
->sc_chnfifo
[i
], 0,
1219 sc
->sc_chfifo_len
* sizeof(struct desc_cryptop_pair
));
1222 /* reset and initialize the SEC h/w device */
1223 talitos_reset_device(sc
);
1224 talitos_init_device(sc
);
1226 sc
->sc_cid
= crypto_get_driverid(softc_get_device(sc
),CRYPTOCAP_F_HARDWARE
);
1227 if (sc
->sc_cid
< 0) {
1228 printk(KERN_ERR
"%s: could not get crypto driver id\n",
1229 device_get_nameunit(sc
->sc_cdev
));
1233 /* register algorithms with the framework */
1234 printk("%s:", device_get_nameunit(sc
->sc_cdev
));
1236 if (sc
->sc_exec_units
& TALITOS_HAS_EU_RNG
) {
1238 #ifdef CONFIG_OCF_RANDOMHARVEST
1239 talitos_rng_init(sc
);
1240 crypto_rregister(sc
->sc_cid
, talitos_read_random
, sc
);
1243 if (sc
->sc_exec_units
& TALITOS_HAS_EU_DEU
) {
1244 printk(" des/3des");
1245 crypto_register(sc
->sc_cid
, CRYPTO_3DES_CBC
, 0, 0);
1246 crypto_register(sc
->sc_cid
, CRYPTO_DES_CBC
, 0, 0);
1248 if (sc
->sc_exec_units
& TALITOS_HAS_EU_AESU
) {
1250 crypto_register(sc
->sc_cid
, CRYPTO_AES_CBC
, 0, 0);
1252 if (sc
->sc_exec_units
& TALITOS_HAS_EU_MDEU
) {
1254 crypto_register(sc
->sc_cid
, CRYPTO_MD5
, 0, 0);
1255 /* HMAC support only with IPsec for now */
1256 crypto_register(sc
->sc_cid
, CRYPTO_MD5_HMAC
, 0, 0);
1258 crypto_register(sc
->sc_cid
, CRYPTO_SHA1
, 0, 0);
1259 /* HMAC support only with IPsec for now */
1260 crypto_register(sc
->sc_cid
, CRYPTO_SHA1_HMAC
, 0, 0);
1266 #ifndef CONFIG_PPC_MERGE
1267 talitos_remove(pdev
);
1272 #ifdef CONFIG_PPC_MERGE
1273 static int talitos_remove(struct of_device
*ofdev
)
1275 static int talitos_remove(struct platform_device
*pdev
)
1278 #ifdef CONFIG_PPC_MERGE
1279 struct talitos_softc
*sc
= dev_get_drvdata(&ofdev
->dev
);
1281 struct talitos_softc
*sc
= platform_get_drvdata(pdev
);
1285 DPRINTF("%s()\n", __FUNCTION__
);
1286 if (sc
->sc_cid
>= 0)
1287 crypto_unregister_all(sc
->sc_cid
);
1288 if (sc
->sc_chnfifo
) {
1289 for (i
= 0; i
< sc
->sc_num_channels
; i
++)
1290 if (sc
->sc_chnfifo
[i
])
1291 kfree(sc
->sc_chnfifo
[i
]);
1292 kfree(sc
->sc_chnfifo
);
1294 if (sc
->sc_chnlastalg
)
1295 kfree(sc
->sc_chnlastalg
);
1296 if (sc
->sc_chnfifolock
)
1297 kfree(sc
->sc_chnfifolock
);
1298 if (sc
->sc_irq
!= -1)
1299 free_irq(sc
->sc_irq
, sc
);
1300 if (sc
->sc_base_addr
)
1301 iounmap((void *) sc
->sc_base_addr
);
1306 #ifdef CONFIG_PPC_MERGE
1307 static struct of_device_id talitos_match
[] = {
1310 .compatible
= "talitos",
1315 MODULE_DEVICE_TABLE(of
, talitos_match
);
1317 static struct of_platform_driver talitos_driver
= {
1319 .match_table
= talitos_match
,
1320 .probe
= talitos_probe
,
1321 .remove
= talitos_remove
,
1324 static int __init
talitos_init(void)
1326 return of_register_platform_driver(&talitos_driver
);
1329 static void __exit
talitos_exit(void)
1331 of_unregister_platform_driver(&talitos_driver
);
1334 /* Structure for a platform device driver */
1335 static struct platform_driver talitos_driver
= {
1336 .probe
= talitos_probe
,
1337 .remove
= talitos_remove
,
1343 static int __init
talitos_init(void)
1345 return platform_driver_register(&talitos_driver
);
1348 static void __exit
talitos_exit(void)
1350 platform_driver_unregister(&talitos_driver
);
1354 module_init(talitos_init
);
1355 module_exit(talitos_exit
);
1357 MODULE_LICENSE("Dual BSD/GPL");
1358 MODULE_AUTHOR("kim.phillips@freescale.com");
1359 MODULE_DESCRIPTION("OCF driver for Freescale SEC (talitos)");