[ar71xx] create firmware image for the Ubiquiti LS-SR71 board
[openwrt.git] / target / linux / s3c24xx / patches-2.6.24 / 1009-s3c2410-bbt.patch.patch
1 From 8e01740813dc6a1d804e61d303549b04e160d153 Mon Sep 17 00:00:00 2001
2 From: mokopatches <mokopatches@openmoko.org>
3 Date: Fri, 4 Apr 2008 11:30:37 +0100
4 Subject: [PATCH] s3c2410-bbt.patch
5 [PATCH] Add Kconfig option to enable NAND bad-block-table support for s3c2410
6
7 This patch adds a new CONFIG_MTD_NAND_S3C2410_BBT which, if enabled,
8 asks the mtd NAND core to use a bad-block table.
9
10 Signed-off-by: Harald Welte <laforge@openmoko.org>
11 ---
12 drivers/mtd/nand/s3c2410.c | 6 +++++-
13 include/asm-arm/plat-s3c/nand.h | 3 +++
14 2 files changed, 8 insertions(+), 1 deletions(-)
15
16 diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
17 index 355de78..770306c 100644
18 --- a/drivers/mtd/nand/s3c2410.c
19 +++ b/drivers/mtd/nand/s3c2410.c
20 @@ -612,9 +612,13 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
21 chip->select_chip = s3c2410_nand_select_chip;
22 chip->chip_delay = 50;
23 chip->priv = nmtd;
24 - chip->options = 0;
25 chip->controller = &info->controller;
26
27 + if (set->flags & S3C2410_NAND_BBT)
28 + chip->options = NAND_USE_FLASH_BBT;
29 + else
30 + chip->options = 0;
31 +
32 switch (info->cpu_type) {
33 case TYPE_S3C2410:
34 chip->IO_ADDR_W = regs + S3C2410_NFDATA;
35 diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h
36 index 8816f7f..cb87f9e 100644
37 --- a/include/asm-arm/plat-s3c/nand.h
38 +++ b/include/asm-arm/plat-s3c/nand.h
39 @@ -21,9 +21,12 @@
40 * partitions = mtd partition list
41 */
42
43 +#define S3C2410_NAND_BBT 0x0001
44 +
45 struct s3c2410_nand_set {
46 int nr_chips;
47 int nr_partitions;
48 + unsigned int flags;
49 char *name;
50 int *nr_map;
51 struct mtd_partition *partitions;
52 --
53 1.5.6.5
54
This page took 0.044678 seconds and 5 git commands to generate.