update bcm963xx patch and add some binary compatibility hacks (incomplete)
[openwrt.git] / docs / hardware / linksys / wrt54g_v11 / nvram.txt
1 Intel_firmware_version=v1.41.8
2 boardnum=42
3 boardtype=bcm94710dev
4 boot_date=Fri Sep 26 00:34:47 2003
5 boot_ver=v1.5
6 boot_wait=on
7 clkfreq=125
8 dl_ram_addr=a0001000
9 et0macaddr=00:0C:41:B3:3C:55
10 et0mdcport=0
11 et0phyaddr=30
12 et1macaddr=00:0C:41:B3:3C:56
13 et1mdcport=1
14 et1phyaddr=30
15 firmware_version=v1.42.2
16 flash_type=AMD 29lv320DT 2Mx16 TopB
17 lan_ipaddr=192.168.1.1
18 lan_netmask=255.255.255.0
19 os_flash_addr=bfc40000
20 os_ram_addr=80001000
21 pmon_ver=PMON 3.31.15.0
22 scratch=a0180000
23 sdram_config=0x0000
24 sdram_init=0x0419
25 sdram_ncdl=0x00000000
26 sdram_refresh=0x8040
27 watchdog=5000
28 wl0_active_mac=
29 wl0_afterburner=auto
30 wl0_afterburner_override=-1
31 wl0_antdiv=-1
32 wl0_ap_ip=
33 wl0_ap_isolate=0
34 wl0_ap_ssid=
35 wl0_auth=0
36 wl0_auth_mode=disabled
37 wl0_bcn=100
38 wl0_channel=6
39 wl0_closed=0
40 wl0_corerev=5
41 wl0_country=Worldwide
42 wl0_country_code=AU
43 wl0_crypto=tkip
44 wl0_dtim=1
45 wl0_frag=2346
46 wl0_frameburst=on
47 wl0_gmode=1
48 wl0_gmode_protection=auto
49 wl0_hwaddr=00:0C:41:B3:3C:57
50 wl0_ifname=eth2
51 wl0_infra=1
52 wl0_key1=
53 wl0_key2=
54 wl0_key3=
55 wl0_key4=
56 wl0_key=1
57 wl0_lazywds=1
58 wl0_mac_deny=
59 wl0_mac_list=
60 wl0_maclist=
61 wl0_macmode1=disabled
62 wl0_macmode=disabled
63 wl0_mode=ap
64 wl0_mrate=0
65 wl0_net_mode=mixed
66 wl0_passphrase=
67 wl0_phytype=g
68 wl0_phytypes=g
69 wl0_plcphdr=long
70 wl0_radio=1
71 wl0_radioids=BCM2050
72 wl0_radius_ipaddr=
73 wl0_radius_key=
74 wl0_radius_port=1812
75 wl0_rate=0
76 wl0_rateset=default
77 wl0_rts=2347
78 wl0_ssid=linksys
79 wl0_unit=0
80 wl0_wds=
81 wl0_wep=off
82 wl0_wep_bit=64
83 wl0_wep_buf=
84 wl0_wep_gen=
85 wl0_wep_last=
86 wl0_wpa_gtk_rekey=3600
87 wl0_wpa_psk=
88 wl_country_code=AU
This page took 0.063787 seconds and 5 git commands to generate.