target/linux/atheros/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2 if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
   3      -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \
   4      -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
   5         uci batch <<EOF
   6 set network.lan.ifname=eth0.1
   7 set network.wan=interface
   8 set network.wan.ifname=eth0.2
   9 set network.wan.proto=dhcp
  10 EOF
  11         HAS_SWITCH=1
  12 fi
  13
  14 if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" ]; then
  15         uci batch <<EOF
  16 set network.eth0=switch
  17 set network.eth0.reset=1
  18 set network.eth0.enable_vlan=1
  19 set network.eth0_1=switch_vlan
  20 set network.eth0_1.device=eth0
  21 set network.eth0_1.vlan=1
  22 set network.eth0_1.ports="0 1 2 3 5t"
  23 set network.eth0_2=switch_vlan
  24 set network.eth0_2.device=eth0
  25 set network.eth0_2.vlan=2
  26 set network.eth0_2.ports="4 5t"
  27 EOF
  28         HAS_SWITCH=1
  29 fi
  30
  31 [ -z "$HAS_SWITCH" -a -d /sys/class/net/eth1 ] && {
  32         uci batch <<EOF
  33 set network.wan=interface
  34 set network.wan.ifname=eth1
  35 set network.wan.proto=dhcp
  36 EOF
  37 }
  38
  39 uci commit network