[kernel] refresh 2.6.32 patches
[openwrt.git] / target / linux / ifxmips / files-2.6.33 / arch / mips / pci / pci-ifxmips.c
1 #include <linux/types.h>
2 #include <linux/pci.h>
3 #include <linux/kernel.h>
4 #include <linux/init.h>
5 #include <linux/delay.h>
6 #include <linux/mm.h>
7 #include <asm/addrspace.h>
8 #include <linux/vmalloc.h>
9 #include <ifxmips.h>
10 #include <ifxmips_irq.h>
11 #include <ifxmips_cgu.h>
12
13 #define IFXMIPS_PCI_MEM_BASE 0x18000000
14 #define IFXMIPS_PCI_MEM_SIZE 0x02000000
15 #define IFXMIPS_PCI_IO_BASE 0x1AE00000
16 #define IFXMIPS_PCI_IO_SIZE 0x00200000
17
18 extern int ifxmips_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
19 extern int ifxmips_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
20
21 struct pci_ops ifxmips_pci_ops =
22 {
23 .read = ifxmips_pci_read_config_dword,
24 .write = ifxmips_pci_write_config_dword
25 };
26
27 static struct resource pci_io_resource =
28 {
29 .name = "io pci IO space",
30 .start = IFXMIPS_PCI_IO_BASE,
31 .end = IFXMIPS_PCI_IO_BASE + IFXMIPS_PCI_IO_SIZE - 1,
32 .flags = IORESOURCE_IO
33 };
34
35 static struct resource pci_mem_resource =
36 {
37 .name = "ext pci memory space",
38 .start = IFXMIPS_PCI_MEM_BASE,
39 .end = IFXMIPS_PCI_MEM_BASE + IFXMIPS_PCI_MEM_SIZE - 1,
40 .flags = IORESOURCE_MEM
41 };
42
43 static struct pci_controller ifxmips_pci_controller =
44 {
45 .pci_ops = &ifxmips_pci_ops,
46 .mem_resource = &pci_mem_resource,
47 .mem_offset = 0x00000000UL,
48 .io_resource = &pci_io_resource,
49 .io_offset = 0x00000000UL,
50 };
51
52 /* the cpu can can generate the 33Mhz or rely on an external clock the cgu needs the
53 proper setting, otherwise the cpu hangs. we have no way of runtime detecting this */
54 u32 ifxmips_pci_mapped_cfg;
55 int ifxmips_pci_external_clock = 0;
56
57 /* Since the PCI REQ pins can be reused for other functionality, make it possible
58 to exclude those from interpretation by the PCI controller */
59 int ifxmips_pci_req_mask = 0xf;
60
61 static int __init
62 ifxmips_pci_set_external_clk(char *str)
63 {
64 printk("cgu: setting up external pci clock\n");
65 ifxmips_pci_external_clock = 1;
66 return 1;
67 }
68 __setup("pci_external_clk", ifxmips_pci_set_external_clk);
69
70 int
71 pcibios_plat_dev_init(struct pci_dev *dev)
72 {
73 u8 pin;
74
75 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
76 switch(pin)
77 {
78 case 0:
79 break;
80 case 1:
81 //falling edge level triggered:0x4, low level:0xc, rising edge:0x2
82 ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_CON) | 0xc, IFXMIPS_EBU_PCC_CON);
83 ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_IEN) | 0x10, IFXMIPS_EBU_PCC_IEN);
84 break;
85 case 2:
86 case 3:
87 case 4:
88 printk ("WARNING: interrupt pin %d not supported yet!\n", pin);
89 default:
90 printk ("WARNING: invalid interrupt pin %d\n", pin);
91 return 1;
92 }
93 return 0;
94 }
95
96 static u32 calc_bar11mask(void)
97 {
98 u32 mem, bar11mask;
99
100 /* BAR11MASK value depends on available memory on system. */
101 mem = num_physpages * PAGE_SIZE;
102 bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) -1)) -1)) | 8;
103
104 return bar11mask;
105 }
106
107 static void __init
108 ifxmips_pci_startup(void)
109 {
110 u32 temp_buffer;
111
112 cgu_setup_pci_clk(ifxmips_pci_external_clock);
113
114 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
115 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OD) | (1 << 5), IFXMIPS_GPIO_P1_OD);
116 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | (1 << 5), IFXMIPS_GPIO_P1_DIR);
117 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL1);
118 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL0);
119 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) & ~0x2000, IFXMIPS_GPIO_P1_DIR);
120 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | 0x4000, IFXMIPS_GPIO_P1_DIR);
121 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~0x6000, IFXMIPS_GPIO_P1_ALTSEL1);
122 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) | 0x6000, IFXMIPS_GPIO_P1_ALTSEL0);
123 /* enable auto-switching between PCI and EBU */
124 ifxmips_w32(0xa, PCI_CR_CLK_CTRL);
125 /* busy, i.e. configuration is not done, PCI access has to be retried */
126 ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
127 wmb ();
128 /* BUS Master/IO/MEM access */
129 ifxmips_w32(ifxmips_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
130
131 /* enable external 2 PCI masters */
132 temp_buffer = ifxmips_r32(PCI_CR_PC_ARB);
133 temp_buffer &= (~(ifxmips_pci_req_mask << 16));
134 /* enable internal arbiter */
135 temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
136 /* enable internal PCI master reqest */
137 temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
138
139 /* enable EBU reqest */
140 temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
141
142 /* enable all external masters request */
143 temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
144 ifxmips_w32(temp_buffer, PCI_CR_PC_ARB);
145 wmb ();
146
147 ifxmips_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
148 ifxmips_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
149 ifxmips_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
150 ifxmips_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
151 ifxmips_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
152 ifxmips_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
153 ifxmips_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
154 ifxmips_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
155 ifxmips_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
156 ifxmips_w32(calc_bar11mask(), PCI_CR_BAR11MASK);
157 ifxmips_w32(0, PCI_CR_PCI_ADDR_MAP11);
158 ifxmips_w32(0, PCI_CS_BASE_ADDR1);
159 #ifdef CONFIG_SWAP_IO_SPACE
160 /* both TX and RX endian swap are enabled */
161 ifxmips_w32(ifxmips_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
162 wmb ();
163 #endif
164 /*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
165 ifxmips_w32(ifxmips_r32(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
166 ifxmips_w32(ifxmips_r32(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
167 /*use 8 dw burst length */
168 ifxmips_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
169 ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
170 wmb();
171 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) & ~(1 << 5), IFXMIPS_GPIO_P1_OUT);
172 wmb();
173 mdelay(1);
174 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
175 }
176
177 int __init
178 pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
179 switch(slot)
180 {
181 case 13:
182 /* IDSEL = AD29 --> USB Host Controller */
183 return (INT_NUM_IM1_IRL0 + 17);
184 case 14:
185 /* IDSEL = AD30 --> mini PCI connector */
186 return (INT_NUM_IM0_IRL0 + 22);
187 default:
188 printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
189 return 0;
190 }
191 }
192
193 int __init
194 pcibios_init(void)
195 {
196 extern int pci_probe_only;
197
198 pci_probe_only = 0;
199 printk("PCI: Probing PCI hardware on host bus 0.\n");
200 ifxmips_pci_startup ();
201 ifxmips_pci_mapped_cfg = (u32)ioremap_nocache(0x17000000, 0x800 * 16);
202 printk("IFXMips PCI mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_mapped_cfg);
203 ifxmips_pci_controller.io_map_base = (unsigned long)ioremap(IFXMIPS_PCI_IO_BASE, IFXMIPS_PCI_IO_SIZE - 1);
204 printk("IFXMips PCI I/O mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_controller.io_map_base);
205 register_pci_controller(&ifxmips_pci_controller);
206 return 0;
207 }
208
209 arch_initcall(pcibios_init);
This page took 0.053016 seconds and 5 git commands to generate.