[ar71xx] fix dir-825-b1 default network config after r21905
[openwrt.git] / package / madwifi / patches / 455-beacon_watchdog.patch
1 --- a/ath/if_ath.c
2 +++ b/ath/if_ath.c
3 @@ -379,6 +379,7 @@ static u_int32_t ath_get_clamped_maxtxpo
4 static u_int32_t ath_set_clamped_maxtxpower(struct ath_softc *sc,
5 u_int32_t new_clamped_maxtxpower);
6
7 +static void ath_bcn_timer(unsigned long arg);
8 static void ath_poll_disable(struct net_device *dev);
9 static void ath_poll_enable(struct net_device *dev);
10 static void ath_fetch_idle_time(struct ath_softc *sc);
11 @@ -829,6 +830,10 @@ ath_attach(u_int16_t devid, struct net_d
12 sc->sc_cal_ch.function = ath_calibrate;
13 sc->sc_cal_ch.data = (unsigned long) dev;
14
15 + init_timer(&sc->sc_bcntimer);
16 + sc->sc_bcntimer.function = ath_bcn_timer;
17 + sc->sc_bcntimer.data = (unsigned long) dev;
18 +
19 /* initialize DFS related variables */
20 sc->sc_dfswait = 0;
21 sc->sc_dfs_cac = 0;
22 @@ -2704,6 +2709,7 @@ ath_stop_locked(struct net_device *dev)
23 DPRINTF(sc, ATH_DEBUG_RESET, "invalid=%u flags=0x%x\n",
24 sc->sc_invalid, dev->flags);
25
26 + del_timer_sync(&sc->sc_bcntimer);
27 if (dev->flags & IFF_RUNNING) {
28 /*
29 * Shutdown the hardware and driver:
30 @@ -3006,6 +3012,7 @@ ath_reset(struct net_device *dev)
31 struct ieee80211_channel *c;
32 HAL_STATUS status;
33
34 + del_timer_sync(&sc->sc_bcntimer);
35 /*
36 * XXX: starting the calibration too early seems to lead to
37 * problems with the beacons.
38 @@ -5305,6 +5312,7 @@ ath_beacon_send(struct ath_softc *sc, in
39 if (ath_chan_unavail_dbgmsg(sc))
40 return;
41
42 + mod_timer(&sc->sc_bcntimer, jiffies + sc->sc_bcntimer_reload);
43 /*
44 * Check if the previous beacon has gone out. If
45 * not don't try to post another, skip this period
46 @@ -5487,6 +5495,18 @@ ath_beacon_free(struct ath_softc *sc)
47 cleanup_ath_buf(sc, bf, BUS_DMA_TODEVICE);
48 }
49
50 +static void ath_bcn_timer(unsigned long arg)
51 +{
52 + struct net_device *dev = (struct net_device *)arg;
53 + struct ath_softc *sc = netdev_priv(dev);
54 + struct ath_hal *ah = sc->sc_ah;
55 +
56 + if (!sc->sc_beacons)
57 + return;
58 +
59 + ath_reset(dev);
60 +}
61 +
62 /*
63 * Configure the beacon and sleep timers.
64 *
65 @@ -5523,6 +5543,7 @@ ath_beacon_config(struct ath_softc *sc,
66 if (vap == NULL)
67 vap = TAILQ_FIRST(&ic->ic_vaps); /* XXX */
68
69 + del_timer_sync(&sc->sc_bcntimer);
70 ni = vap->iv_bss;
71
72 /* TSF calculation is timing critical - we don't want to be interrupted here */
73 @@ -5699,6 +5720,9 @@ ath_beacon_config(struct ath_softc *sc,
74 sc->sc_imask |= HAL_INT_SWBA;
75 ath_set_beacon_cal(sc, 1);
76 ath_beaconq_config(sc);
77 +
78 + sc->sc_bcntimer_reload = msecs_to_jiffies(10 * (intval & HAL_BEACON_PERIOD));
79 + mod_timer(&sc->sc_bcntimer, jiffies + sc->sc_bcntimer_reload);
80 } else
81 ath_set_beacon_cal(sc, 0);
82
83 --- a/ath/if_athvar.h
84 +++ b/ath/if_athvar.h
85 @@ -789,6 +789,10 @@ struct ath_softc {
86 u_int16_t sc_ledoff; /* off time for current blink */
87 struct timer_list sc_ledtimer; /* led off timer */
88
89 + /* beacon watchdog timer */
90 + u_int32_t sc_bcntimer_reload;
91 + struct timer_list sc_bcntimer;
92 +
93 struct ATH_TQ_STRUCT sc_fataltq; /* fatal error intr tasklet */
94
95 int sc_rxbufsize; /* rx size based on mtu */
This page took 0.051662 seconds and 5 git commands to generate.