[ar71xx] fix dir-825-b1 default network config after r21905
[openwrt.git] / package / px5g / src / polarssl / rsa.h
1 /**
2 * \file rsa.h
3 *
4 * Based on XySSL: Copyright (C) 2006-2008 Christophe Devine
5 *
6 * Copyright (C) 2009 Paul Bakker <polarssl_maintainer at polarssl dot org>
7 *
8 * All rights reserved.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 *
14 * * Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * * Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * * Neither the names of PolarSSL or XySSL nor the names of its contributors
20 * may be used to endorse or promote products derived from this software
21 * without specific prior written permission.
22 *
23 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
24 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
25 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
26 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
27 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
28 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
29 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
30 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
31 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
32 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
33 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 */
35 #ifndef POLARSSL_RSA_H
36 #define POLARSSL_RSA_H
37
38 #include "polarssl/bignum.h"
39
40 #define POLARSSL_ERR_RSA_BAD_INPUT_DATA -0x0400
41 #define POLARSSL_ERR_RSA_INVALID_PADDING -0x0410
42 #define POLARSSL_ERR_RSA_KEY_GEN_FAILED -0x0420
43 #define POLARSSL_ERR_RSA_KEY_CHECK_FAILED -0x0430
44 #define POLARSSL_ERR_RSA_PUBLIC_FAILED -0x0440
45 #define POLARSSL_ERR_RSA_PRIVATE_FAILED -0x0450
46 #define POLARSSL_ERR_RSA_VERIFY_FAILED -0x0460
47 #define POLARSSL_ERR_RSA_OUTPUT_TO_LARGE -0x0470
48
49 /*
50 * PKCS#1 constants
51 */
52 #define RSA_RAW 0
53 #define RSA_MD2 2
54 #define RSA_MD4 3
55 #define RSA_MD5 4
56 #define RSA_SHA1 5
57 #define RSA_SHA256 6
58
59 #define RSA_PUBLIC 0
60 #define RSA_PRIVATE 1
61
62 #define RSA_PKCS_V15 0
63 #define RSA_PKCS_V21 1
64
65 #define RSA_SIGN 1
66 #define RSA_CRYPT 2
67
68 /*
69 * DigestInfo ::= SEQUENCE {
70 * digestAlgorithm DigestAlgorithmIdentifier,
71 * digest Digest }
72 *
73 * DigestAlgorithmIdentifier ::= AlgorithmIdentifier
74 *
75 * Digest ::= OCTET STRING
76 */
77 #define ASN1_HASH_MDX \
78 "\x30\x20\x30\x0C\x06\x08\x2A\x86\x48" \
79 "\x86\xF7\x0D\x02\x00\x05\x00\x04\x10"
80
81 #define ASN1_HASH_SHA1 \
82 "\x30\x21\x30\x09\x06\x05\x2B\x0E\x03" \
83 "\x02\x1A\x05\x00\x04\x14"
84
85 /**
86 * \brief RSA context structure
87 */
88 typedef struct
89 {
90 int ver; /*!< always 0 */
91 int len; /*!< size(N) in chars */
92
93 mpi N; /*!< public modulus */
94 mpi E; /*!< public exponent */
95
96 mpi D; /*!< private exponent */
97 mpi P; /*!< 1st prime factor */
98 mpi Q; /*!< 2nd prime factor */
99 mpi DP; /*!< D % (P - 1) */
100 mpi DQ; /*!< D % (Q - 1) */
101 mpi QP; /*!< 1 / (Q % P) */
102
103 mpi RN; /*!< cached R^2 mod N */
104 mpi RP; /*!< cached R^2 mod P */
105 mpi RQ; /*!< cached R^2 mod Q */
106
107 int padding; /*!< 1.5 or OAEP/PSS */
108 int hash_id; /*!< hash identifier */
109 int (*f_rng)(void *); /*!< RNG function */
110 void *p_rng; /*!< RNG parameter */
111 }
112 rsa_context;
113
114 #ifdef __cplusplus
115 extern "C" {
116 #endif
117
118 /**
119 * \brief Initialize an RSA context
120 *
121 * \param ctx RSA context to be initialized
122 * \param padding RSA_PKCS_V15 or RSA_PKCS_V21
123 * \param hash_id RSA_PKCS_V21 hash identifier
124 * \param f_rng RNG function
125 * \param p_rng RNG parameter
126 *
127 * \note The hash_id parameter is actually ignored
128 * when using RSA_PKCS_V15 padding.
129 *
130 * \note Currently (xyssl-0.8), RSA_PKCS_V21 padding
131 * is not supported.
132 */
133 void rsa_init( rsa_context *ctx,
134 int padding,
135 int hash_id,
136 int (*f_rng)(void *),
137 void *p_rng );
138
139 /**
140 * \brief Generate an RSA keypair
141 *
142 * \param ctx RSA context that will hold the key
143 * \param nbits size of the public key in bits
144 * \param exponent public exponent (e.g., 65537)
145 *
146 * \note rsa_init() must be called beforehand to setup
147 * the RSA context (especially f_rng and p_rng).
148 *
149 * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
150 */
151 int rsa_gen_key( rsa_context *ctx, int nbits, int exponent );
152
153 /**
154 * \brief Check a public RSA key
155 *
156 * \param ctx RSA context to be checked
157 *
158 * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
159 */
160 int rsa_check_pubkey( rsa_context *ctx );
161
162 /**
163 * \brief Check a private RSA key
164 *
165 * \param ctx RSA context to be checked
166 *
167 * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
168 */
169 int rsa_check_privkey( rsa_context *ctx );
170
171 /**
172 * \brief Do an RSA public key operation
173 *
174 * \param ctx RSA context
175 * \param input input buffer
176 * \param output output buffer
177 *
178 * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
179 *
180 * \note This function does NOT take care of message
181 * padding. Also, be sure to set input[0] = 0.
182 *
183 * \note The input and output buffers must be large
184 * enough (eg. 128 bytes if RSA-1024 is used).
185 */
186 int rsa_public( rsa_context *ctx,
187 unsigned char *input,
188 unsigned char *output );
189
190 /**
191 * \brief Do an RSA private key operation
192 *
193 * \param ctx RSA context
194 * \param input input buffer
195 * \param output output buffer
196 *
197 * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
198 *
199 * \note The input and output buffers must be large
200 * enough (eg. 128 bytes if RSA-1024 is used).
201 */
202 int rsa_private( rsa_context *ctx,
203 unsigned char *input,
204 unsigned char *output );
205
206 /**
207 * \brief Add the message padding, then do an RSA operation
208 *
209 * \param ctx RSA context
210 * \param mode RSA_PUBLIC or RSA_PRIVATE
211 * \param ilen contains the the plaintext length
212 * \param input buffer holding the data to be encrypted
213 * \param output buffer that will hold the ciphertext
214 *
215 * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
216 *
217 * \note The output buffer must be as large as the size
218 * of ctx->N (eg. 128 bytes if RSA-1024 is used).
219 */
220 int rsa_pkcs1_encrypt( rsa_context *ctx,
221 int mode, int ilen,
222 unsigned char *input,
223 unsigned char *output );
224
225 /**
226 * \brief Do an RSA operation, then remove the message padding
227 *
228 * \param ctx RSA context
229 * \param mode RSA_PUBLIC or RSA_PRIVATE
230 * \param input buffer holding the encrypted data
231 * \param output buffer that will hold the plaintext
232 * \param olen will contain the plaintext length
233 * \param output_max_len maximum length of the output buffer
234 *
235 * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
236 *
237 * \note The output buffer must be as large as the size
238 * of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise
239 * an error is thrown.
240 */
241 int rsa_pkcs1_decrypt( rsa_context *ctx,
242 int mode, int *olen,
243 unsigned char *input,
244 unsigned char *output,
245 int output_max_len);
246
247 /**
248 * \brief Do a private RSA to sign a message digest
249 *
250 * \param ctx RSA context
251 * \param mode RSA_PUBLIC or RSA_PRIVATE
252 * \param hash_id RSA_RAW, RSA_MD{2,4,5} or RSA_SHA{1,256}
253 * \param hashlen message digest length (for RSA_RAW only)
254 * \param hash buffer holding the message digest
255 * \param sig buffer that will hold the ciphertext
256 *
257 * \return 0 if the signing operation was successful,
258 * or an POLARSSL_ERR_RSA_XXX error code
259 *
260 * \note The "sig" buffer must be as large as the size
261 * of ctx->N (eg. 128 bytes if RSA-1024 is used).
262 */
263 int rsa_pkcs1_sign( rsa_context *ctx,
264 int mode,
265 int hash_id,
266 int hashlen,
267 unsigned char *hash,
268 unsigned char *sig );
269
270 /**
271 * \brief Do a public RSA and check the message digest
272 *
273 * \param ctx points to an RSA public key
274 * \param mode RSA_PUBLIC or RSA_PRIVATE
275 * \param hash_id RSA_RAW, RSA_MD{2,4,5} or RSA_SHA{1,256}
276 * \param hashlen message digest length (for RSA_RAW only)
277 * \param hash buffer holding the message digest
278 * \param sig buffer holding the ciphertext
279 *
280 * \return 0 if the verify operation was successful,
281 * or an POLARSSL_ERR_RSA_XXX error code
282 *
283 * \note The "sig" buffer must be as large as the size
284 * of ctx->N (eg. 128 bytes if RSA-1024 is used).
285 */
286 int rsa_pkcs1_verify( rsa_context *ctx,
287 int mode,
288 int hash_id,
289 int hashlen,
290 unsigned char *hash,
291 unsigned char *sig );
292
293 /**
294 * \brief Free the components of an RSA key
295 */
296 void rsa_free( rsa_context *ctx );
297
298 /**
299 * \brief Checkup routine
300 *
301 * \return 0 if successful, or 1 if the test failed
302 */
303 int rsa_self_test( int verbose );
304
305 #ifdef __cplusplus
306 }
307 #endif
308
309 #endif /* rsa.h */
This page took 0.055242 seconds and 5 git commands to generate.