ar71xx: add latch_change field to rb750_led_platform_data
[openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-mzk-w300nh.c
1 /*
2 * Planex MZK-W300NH board support
3 *
4 * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
10 */
11
12 #include <asm/mach-ath79/ath79.h>
13
14 #include "dev-eth.h"
15 #include "dev-gpio-buttons.h"
16 #include "dev-leds-gpio.h"
17 #include "dev-m25p80.h"
18 #include "dev-wmac.h"
19 #include "machtypes.h"
20
21 #define MZK_W300NH_GPIO_LED_STATUS 1
22 #define MZK_W300NH_GPIO_LED_WPS 3
23 #define MZK_W300NH_GPIO_LED_WLAN 6
24 #define MZK_W300NH_GPIO_LED_AP_GREEN 15
25 #define MZK_W300NH_GPIO_LED_AP_AMBER 16
26
27 #define MZK_W300NH_GPIO_BTN_APROUTER 5
28 #define MZK_W300NH_GPIO_BTN_WPS 12
29 #define MZK_W300NH_GPIO_BTN_RESET 21
30
31 #define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */
32 #define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL)
33
34 static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
35 {
36 .name = "planex:green:status",
37 .gpio = MZK_W300NH_GPIO_LED_STATUS,
38 .active_low = 1,
39 }, {
40 .name = "planex:blue:wps",
41 .gpio = MZK_W300NH_GPIO_LED_WPS,
42 .active_low = 1,
43 }, {
44 .name = "planex:green:wlan",
45 .gpio = MZK_W300NH_GPIO_LED_WLAN,
46 .active_low = 1,
47 }, {
48 .name = "planex:green:aprouter",
49 .gpio = MZK_W300NH_GPIO_LED_AP_GREEN,
50 }, {
51 .name = "planex:amber:aprouter",
52 .gpio = MZK_W300NH_GPIO_LED_AP_AMBER,
53 }
54 };
55
56 static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = {
57 {
58 .desc = "reset",
59 .type = EV_KEY,
60 .code = KEY_RESTART,
61 .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
62 .gpio = MZK_W300NH_GPIO_BTN_RESET,
63 .active_low = 1,
64 }, {
65 .desc = "wps",
66 .type = EV_KEY,
67 .code = KEY_WPS_BUTTON,
68 .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
69 .gpio = MZK_W300NH_GPIO_BTN_WPS,
70 .active_low = 1,
71 }, {
72 .desc = "aprouter",
73 .type = EV_KEY,
74 .code = BTN_2,
75 .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
76 .gpio = MZK_W300NH_GPIO_BTN_APROUTER,
77 .active_low = 0,
78 }
79 };
80
81 #define MZK_W300NH_WAN_PHYMASK BIT(4)
82 #define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK)
83
84 static void __init mzk_w300nh_setup(void)
85 {
86 u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
87
88 ath79_register_mdio(0, MZK_W300NH_MDIO_MASK);
89
90 ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
91 ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
92 ath79_eth0_data.speed = SPEED_100;
93 ath79_eth0_data.duplex = DUPLEX_FULL;
94 ath79_eth0_data.has_ar8216 = 1;
95
96 ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
97 ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
98 ath79_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK;
99
100 ath79_register_eth(0);
101 ath79_register_eth(1);
102
103 ath79_register_m25p80(NULL);
104
105 ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
106 mzk_w300nh_leds_gpio);
107
108 ath79_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL,
109 ARRAY_SIZE(mzk_w300nh_gpio_keys),
110 mzk_w300nh_gpio_keys);
111 ath79_register_wmac(eeprom, NULL);
112 }
113
114 MIPS_MACHINE(ATH79_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",
115 mzk_w300nh_setup);
This page took 0.046087 seconds and 5 git commands to generate.