1 #!/bin/sh /etc/rc.common
2 # Copyright (C) 2006 OpenWrt.org
7 [ -e /etc
/config
/network
] && exit 0
12 if grep -E 'mtd0: 000(6|a)0000' /proc
/mtd
2>&- >&-; then
14 echo boardtype
=wgt634u
16 strings "$(find_mtd_part nvram)"
19 function p(cfgname, name) {
20 if (c[name] != "") print " option " cfgname " \"" c[name] "\""
23 function macinc(mac, maca, i, result) {
25 for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
26 if (++maca[6] > 0xff) {
30 for (i = 1; i <= 6; i++) {
31 if (i != 1) result = result ":"
32 result = result sprintf("%02x", maca[i])
39 c["lan_ifname"]="eth0.0"
40 c["wan_ifname"]="eth0.1"
41 c["vlan0ports"]="1 2 3 4 5*"
43 getline < "/proc/diag/model"
45 for (i = 0; i < 6; i++) {
46 if (mac_check != "") mac_check = mac_check ":"
47 mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
51 ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
56 if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
58 c["lan_ifname"] = "eth1"
60 if (model == "ASUS WL-500g") {
61 c["wan_ifname"] = "eth1"
62 c["lan_ifname"] = "eth0"
64 if (model == "Dell TrueMobile 2300") {
65 c["vlan0ports"] = "0 1 2 3 5*"
66 c["vlan1ports"] = "4 5"
68 if (nvram["boardtype"] == "bcm94710r4") {
70 c["lan_ifname"] = "eth0"
71 c["wan_ifname"] = "eth1"
73 if (nvram["boardtype"] == "wgt634u") {
74 c["vlan0ports"] = "0 1 2 3 5*"
75 c["vlan1ports"] = "4 5"
77 if (nvram["boardtype"] == "0x0467") {
78 c["vlan0ports"] = "0 1 2 3 5*"
79 c["vlan1ports"] = "4 5"
81 if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
82 if (nvram["boardnum"] == "45") {
84 c["vlan0ports"] = "1 2 3 4 5*"
85 c["vlan1ports"] = "0 5"
88 c["vlan0ports"] = "0 1 2 3 4 5u"
90 c["lan_ifname"] = "eth0"
91 c["wan_ifname"] = "eth1"
93 # MAC addresses on 4704 tend to be screwed up. Add a workaround here
94 if (nvram["et0macaddr"] ~ mac_check) {
95 c["lan_macaddr"] = nvram["et0macaddr"]
96 c["wan_macaddr"] = macinc(c["lan_macaddr"])
102 if ((nvram["boardnum"] == "2") || \
103 (nvram["boardnum"] == "1024")) {
104 c["lan_ifname"]="eth0"
109 # These are actually same as defaults above. For some reason this script applies
110 # Generic BCM94704 settings instead so we revert to proper settings here.
111 # Hopefully someone will fix this properly soon.
112 if (model == "ASUS WL-700gE") {
113 c["lan_ifname"]="eth0.0"
114 c["wan_ifname"]="eth0.1"
115 c["vlan0ports"]="1 2 3 4 5*"
116 c["vlan1ports"]="0 5"
119 if (model == "Motorola WR850G V2/V3") {
120 c["vlan0ports"]="0 1 2 3 5*"
121 c["vlan1ports"]="4 5"
124 print "#### VLAN configuration "
125 print "config switch eth0"
126 p("vlan0", "vlan0ports")
127 p("vlan1", "vlan1ports")
130 print "#### Loopback configuration"
131 print "config interface loopback"
132 print " option ifname \"lo\""
133 print " option proto static"
134 print " option ipaddr 127.0.0.1"
135 print " option netmask 255.0.0.0"
138 print "#### LAN configuration"
139 print "config interface lan"
140 print " option type bridge"
141 p("ifname", "lan_ifname")
142 p("macaddr", "lan_macaddr")
143 print " option proto static"
144 print " option ipaddr 192.168.1.1"
145 print " option netmask 255.255.255.0"
148 print "#### WAN configuration"
149 print "config interface wan"
150 p("ifname", "wan_ifname")
151 p("macaddr", "wan_macaddr")
152 print " option proto dhcp"
153 }' > /etc
/config
/network
This page took 0.061402 seconds and 5 git commands to generate.