Fix build on non-SMP machines of the remote GDB debugging (#2666)
[openwrt.git] / package / rt2x00 / src / rt2500usb.h
1 /*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21 /*
22 Module: rt2500usb
23 Abstract: Data structures and registers for the rt2500usb module.
24 Supported chipsets: RT2570.
25 */
26
27 #ifndef RT2500USB_H
28 #define RT2500USB_H
29
30 /*
31 * RF chip defines.
32 */
33 #define RF2522 0x0000
34 #define RF2523 0x0001
35 #define RF2524 0x0002
36 #define RF2525 0x0003
37 #define RF2525E 0x0005
38 #define RF5222 0x0010
39
40 /*
41 * RT2570 version
42 */
43 #define RT2570_VERSION_B 2
44 #define RT2570_VERSION_C 3
45 #define RT2570_VERSION_D 4
46
47 /*
48 * Signal information.
49 */
50 #define MAX_RX_SSI -1
51 #define MAX_RX_NOISE -110
52 #define DEFAULT_RSSI_OFFSET 120
53
54 /*
55 * Register layout information.
56 */
57 #define CSR_REG_BASE 0x0400
58 #define CSR_REG_SIZE 0x0100
59 #define EEPROM_BASE 0x0000
60 #define EEPROM_SIZE 0x006a
61 #define BBP_SIZE 0x0060
62
63 /*
64 * Control/Status Registers(CSR).
65 * Some values are set in TU, whereas 1 TU == 1024 us.
66 */
67
68 /*
69 * MAC_CSR0: ASIC revision number.
70 */
71 #define MAC_CSR0 0x0400
72
73 /*
74 * MAC_CSR1: System control.
75 */
76 #define MAC_CSR1 0x0402
77
78 /*
79 * MAC_CSR2: STA MAC register 0.
80 */
81 #define MAC_CSR2 0x0404
82 #define MAC_CSR2_BYTE0 FIELD16(0x00ff)
83 #define MAC_CSR2_BYTE1 FIELD16(0xff00)
84
85 /*
86 * MAC_CSR3: STA MAC register 1.
87 */
88 #define MAC_CSR3 0x0406
89 #define MAC_CSR3_BYTE2 FIELD16(0x00ff)
90 #define MAC_CSR3_BYTE3 FIELD16(0xff00)
91
92 /*
93 * MAC_CSR4: STA MAC register 2.
94 */
95 #define MAC_CSR4 0X0408
96 #define MAC_CSR4_BYTE4 FIELD16(0x00ff)
97 #define MAC_CSR4_BYTE5 FIELD16(0xff00)
98
99 /*
100 * MAC_CSR5: BSSID register 0.
101 */
102 #define MAC_CSR5 0x040a
103 #define MAC_CSR5_BYTE0 FIELD16(0x00ff)
104 #define MAC_CSR5_BYTE1 FIELD16(0xff00)
105
106 /*
107 * MAC_CSR6: BSSID register 1.
108 */
109 #define MAC_CSR6 0x040c
110 #define MAC_CSR6_BYTE2 FIELD16(0x00ff)
111 #define MAC_CSR6_BYTE3 FIELD16(0xff00)
112
113 /*
114 * MAC_CSR7: BSSID register 2.
115 */
116 #define MAC_CSR7 0x040e
117 #define MAC_CSR7_BYTE4 FIELD16(0x00ff)
118 #define MAC_CSR7_BYTE5 FIELD16(0xff00)
119
120 /*
121 * MAC_CSR8: Max frame length.
122 */
123 #define MAC_CSR8 0x0410
124 #define MAC_CSR8_MAX_FRAME_UNIT FIELD16(0x0fff)
125
126 /*
127 * Misc MAC_CSR registers.
128 * MAC_CSR9: Timer control.
129 * MAC_CSR10: Slot time.
130 * MAC_CSR11: IFS.
131 * MAC_CSR12: EIFS.
132 * MAC_CSR13: Power mode0.
133 * MAC_CSR14: Power mode1.
134 * MAC_CSR15: Power saving transition0
135 * MAC_CSR16: Power saving transition1
136 */
137 #define MAC_CSR9 0x0412
138 #define MAC_CSR10 0x0414
139 #define MAC_CSR11 0x0416
140 #define MAC_CSR12 0x0418
141 #define MAC_CSR13 0x041a
142 #define MAC_CSR14 0x041c
143 #define MAC_CSR15 0x041e
144 #define MAC_CSR16 0x0420
145
146 /*
147 * MAC_CSR17: Manual power control / status register.
148 * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake.
149 * SET_STATE: Set state. Write 1 to trigger, self cleared.
150 * BBP_DESIRE_STATE: BBP desired state.
151 * RF_DESIRE_STATE: RF desired state.
152 * BBP_CURRENT_STATE: BBP current state.
153 * RF_CURRENT_STATE: RF current state.
154 * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared.
155 */
156 #define MAC_CSR17 0x0422
157 #define MAC_CSR17_SET_STATE FIELD16(0x0001)
158 #define MAC_CSR17_BBP_DESIRE_STATE FIELD16(0x0006)
159 #define MAC_CSR17_RF_DESIRE_STATE FIELD16(0x0018)
160 #define MAC_CSR17_BBP_CURR_STATE FIELD16(0x0060)
161 #define MAC_CSR17_RF_CURR_STATE FIELD16(0x0180)
162 #define MAC_CSR17_PUT_TO_SLEEP FIELD16(0x0200)
163
164 /*
165 * MAC_CSR18: Wakeup timer register.
166 * DELAY_AFTER_BEACON: Delay after Tbcn expired in units of 1/16 TU.
167 * BEACONS_BEFORE_WAKEUP: Number of beacon before wakeup.
168 * AUTO_WAKE: Enable auto wakeup / sleep mechanism.
169 */
170 #define MAC_CSR18 0x0424
171 #define MAC_CSR18_DELAY_AFTER_BEACON FIELD16(0x00ff)
172 #define MAC_CSR18_BEACONS_BEFORE_WAKEUP FIELD16(0x7f00)
173 #define MAC_CSR18_AUTO_WAKE FIELD16(0x8000)
174
175 /*
176 * MAC_CSR19: GPIO control register.
177 */
178 #define MAC_CSR19 0x0426
179
180 /*
181 * MAC_CSR20: LED control register.
182 * ACTIVITY: 0: idle, 1: active.
183 * LINK: 0: linkoff, 1: linkup.
184 * ACTIVITY_POLARITY: 0: active low, 1: active high.
185 */
186 #define MAC_CSR20 0x0428
187 #define MAC_CSR20_ACTIVITY FIELD16(0x0001)
188 #define MAC_CSR20_LINK FIELD16(0x0002)
189 #define MAC_CSR20_ACTIVITY_POLARITY FIELD16(0x0004)
190
191 /*
192 * MAC_CSR21: LED control register.
193 * ON_PERIOD: On period, default 70ms.
194 * OFF_PERIOD: Off period, default 30ms.
195 */
196 #define MAC_CSR21 0x042a
197 #define MAC_CSR21_ON_PERIOD FIELD16(0x00ff)
198 #define MAC_CSR21_OFF_PERIOD FIELD16(0xff00)
199
200 /*
201 * Collision window control register.
202 */
203 #define MAC_CSR22 0x042c
204
205 /*
206 * Transmit related CSRs.
207 * Some values are set in TU, whereas 1 TU == 1024 us.
208 */
209
210 /*
211 * TXRX_CSR0: Security control register.
212 */
213 #define TXRX_CSR0 0x0440
214 #define TXRX_CSR0_ALGORITHM FIELD16(0x0007)
215 #define TXRX_CSR0_IV_OFFSET FIELD16(0x01f8)
216 #define TXRX_CSR0_KEY_ID FIELD16(0x1e00)
217
218 /*
219 * TXRX_CSR1: TX configuration.
220 * ACK_TIMEOUT: ACK Timeout in unit of 1-us.
221 * TSF_OFFSET: TSF offset in MAC header.
222 * AUTO_SEQUENCE: Let ASIC control frame sequence number.
223 */
224 #define TXRX_CSR1 0x0442
225 #define TXRX_CSR1_ACK_TIMEOUT FIELD16(0x00ff)
226 #define TXRX_CSR1_TSF_OFFSET FIELD16(0x7f00)
227 #define TXRX_CSR1_AUTO_SEQUENCE FIELD16(0x8000)
228
229 /*
230 * TXRX_CSR2: RX control.
231 * DISABLE_RX: Disable rx engine.
232 * DROP_CRC: Drop crc error.
233 * DROP_PHYSICAL: Drop physical error.
234 * DROP_CONTROL: Drop control frame.
235 * DROP_NOT_TO_ME: Drop not to me unicast frame.
236 * DROP_TODS: Drop frame tods bit is true.
237 * DROP_VERSION_ERROR: Drop version error frame.
238 * DROP_MCAST: Drop multicast frames.
239 * DROP_BCAST: Drop broadcast frames.
240 */
241 #define TXRX_CSR2 0x0444
242 #define TXRX_CSR2_DISABLE_RX FIELD16(0x0001)
243 #define TXRX_CSR2_DROP_CRC FIELD16(0x0002)
244 #define TXRX_CSR2_DROP_PHYSICAL FIELD16(0x0004)
245 #define TXRX_CSR2_DROP_CONTROL FIELD16(0x0008)
246 #define TXRX_CSR2_DROP_NOT_TO_ME FIELD16(0x0010)
247 #define TXRX_CSR2_DROP_TODS FIELD16(0x0020)
248 #define TXRX_CSR2_DROP_VERSION_ERROR FIELD16(0x0040)
249 #define TXRX_CSR2_DROP_MCAST FIELD16(0x0200)
250 #define TXRX_CSR2_DROP_BCAST FIELD16(0x0400)
251
252 /*
253 * RX BBP ID registers
254 * TXRX_CSR3: CCK RX BBP ID.
255 * TXRX_CSR4: OFDM RX BBP ID.
256 */
257 #define TXRX_CSR3 0x0446
258 #define TXRX_CSR4 0x0448
259
260 /*
261 * TX BBP ID registers
262 * TXRX_CSR5: CCK TX BBP ID0.
263 * TXRX_CSR5: CCK TX BBP ID1.
264 * TXRX_CSR5: OFDM TX BBP ID0.
265 * TXRX_CSR5: OFDM TX BBP ID1.
266 */
267 #define TXRX_CSR5 0x044a
268 #define TXRX_CSR6 0x044c
269 #define TXRX_CSR7 0x044e
270 #define TXRX_CSR8 0x0450
271
272 /*
273 * TXRX_CSR9: TX ACK time-out.
274 */
275 #define TXRX_CSR9 0x0452
276
277 /*
278 * TXRX_CSR10: Auto responder control.
279 */
280 #define TXRX_CSR10 0x0454
281 #define TXRX_CSR10_AUTORESPOND_PREAMBLE FIELD16(0x0004)
282
283 /*
284 * TXRX_CSR11: Auto responder basic rate.
285 */
286 #define TXRX_CSR11 0x0456
287
288 /*
289 * ACK/CTS time registers.
290 */
291 #define TXRX_CSR12 0x0458
292 #define TXRX_CSR13 0x045a
293 #define TXRX_CSR14 0x045c
294 #define TXRX_CSR15 0x045e
295 #define TXRX_CSR16 0x0460
296 #define TXRX_CSR17 0x0462
297
298 /*
299 * TXRX_CSR18: Synchronization control register.
300 */
301 #define TXRX_CSR18 0x0464
302 #define TXRX_CSR18_OFFSET FIELD16(0x000f)
303 #define TXRX_CSR18_INTERVAL FIELD16(0xfff0)
304
305 /*
306 * TXRX_CSR19: Synchronization control register.
307 * TSF_COUNT: Enable TSF auto counting.
308 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
309 * TBCN: Enable Tbcn with reload value.
310 * BEACON_GEN: Enable beacon generator.
311 */
312 #define TXRX_CSR19 0x0466
313 #define TXRX_CSR19_TSF_COUNT FIELD16(0x0001)
314 #define TXRX_CSR19_TSF_SYNC FIELD16(0x0006)
315 #define TXRX_CSR19_TBCN FIELD16(0x0008)
316 #define TXRX_CSR19_BEACON_GEN FIELD16(0x0010)
317
318 /*
319 * TXRX_CSR20: Tx BEACON offset time control register.
320 * OFFSET: In units of usec.
321 * BCN_EXPECT_WINDOW: Default: 2^CWmin
322 */
323 #define TXRX_CSR20 0x0468
324 #define TXRX_CSR20_OFFSET FIELD16(0x1fff)
325 #define TXRX_CSR20_BCN_EXPECT_WINDOW FIELD16(0xe000)
326
327 /*
328 * TXRX_CSR21
329 */
330 #define TXRX_CSR21 0x046a
331
332 /*
333 * Encryption related CSRs.
334 *
335 */
336
337 /*
338 * SEC_CSR0-SEC_CSR7: Shared key 0, word 0-7
339 */
340 #define SEC_CSR0 0x0480
341 #define SEC_CSR1 0x0482
342 #define SEC_CSR2 0x0484
343 #define SEC_CSR3 0x0486
344 #define SEC_CSR4 0x0488
345 #define SEC_CSR5 0x048a
346 #define SEC_CSR6 0x048c
347 #define SEC_CSR7 0x048e
348
349 /*
350 * SEC_CSR8-SEC_CSR15: Shared key 1, word 0-7
351 */
352 #define SEC_CSR8 0x0490
353 #define SEC_CSR9 0x0492
354 #define SEC_CSR10 0x0494
355 #define SEC_CSR11 0x0496
356 #define SEC_CSR12 0x0498
357 #define SEC_CSR13 0x049a
358 #define SEC_CSR14 0x049c
359 #define SEC_CSR15 0x049e
360
361 /*
362 * SEC_CSR16-SEC_CSR23: Shared key 2, word 0-7
363 */
364 #define SEC_CSR16 0x04a0
365 #define SEC_CSR17 0x04a2
366 #define SEC_CSR18 0X04A4
367 #define SEC_CSR19 0x04a6
368 #define SEC_CSR20 0x04a8
369 #define SEC_CSR21 0x04aa
370 #define SEC_CSR22 0x04ac
371 #define SEC_CSR23 0x04ae
372
373 /*
374 * SEC_CSR24-SEC_CSR31: Shared key 3, word 0-7
375 */
376 #define SEC_CSR24 0x04b0
377 #define SEC_CSR25 0x04b2
378 #define SEC_CSR26 0x04b4
379 #define SEC_CSR27 0x04b6
380 #define SEC_CSR28 0x04b8
381 #define SEC_CSR29 0x04ba
382 #define SEC_CSR30 0x04bc
383 #define SEC_CSR31 0x04be
384
385 /*
386 * PHY control registers.
387 */
388
389 /*
390 * PHY_CSR0: RF switching timing control.
391 */
392 #define PHY_CSR0 0x04c0
393
394 /*
395 * PHY_CSR1: TX PA configuration.
396 */
397 #define PHY_CSR1 0x04c2
398
399 /*
400 * MAC configuration registers.
401 * PHY_CSR2: TX MAC configuration.
402 * PHY_CSR3: RX MAC configuration.
403 */
404 #define PHY_CSR2 0x04c4
405 #define PHY_CSR3 0x04c6
406
407 /*
408 * PHY_CSR4: Interface configuration.
409 */
410 #define PHY_CSR4 0x04c8
411
412 /*
413 * BBP pre-TX registers.
414 * PHY_CSR5: BBP pre-TX CCK.
415 */
416 #define PHY_CSR5 0x04ca
417 #define PHY_CSR5_CCK FIELD16(0x0003)
418 #define PHY_CSR5_CCK_FLIP FIELD16(0x0004)
419
420 /*
421 * BBP pre-TX registers.
422 * PHY_CSR6: BBP pre-TX OFDM.
423 */
424 #define PHY_CSR6 0x04cc
425 #define PHY_CSR6_OFDM FIELD16(0x0003)
426 #define PHY_CSR6_OFDM_FLIP FIELD16(0x0004)
427
428 /*
429 * PHY_CSR7: BBP access register 0.
430 * BBP_DATA: BBP data.
431 * BBP_REG_ID: BBP register ID.
432 * BBP_READ_CONTROL: 0: write, 1: read.
433 */
434 #define PHY_CSR7 0x04ce
435 #define PHY_CSR7_DATA FIELD16(0x00ff)
436 #define PHY_CSR7_REG_ID FIELD16(0x7f00)
437 #define PHY_CSR7_READ_CONTROL FIELD16(0x8000)
438
439 /*
440 * PHY_CSR8: BBP access register 1.
441 * BBP_BUSY: ASIC is busy execute BBP programming.
442 */
443 #define PHY_CSR8 0x04d0
444 #define PHY_CSR8_BUSY FIELD16(0x0001)
445
446 /*
447 * PHY_CSR9: RF access register.
448 * RF_VALUE: Register value + id to program into rf/if.
449 */
450 #define PHY_CSR9 0x04d2
451 #define PHY_CSR9_RF_VALUE FIELD16(0xffff)
452
453 /*
454 * PHY_CSR10: RF access register.
455 * RF_VALUE: Register value + id to program into rf/if.
456 * RF_NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22).
457 * RF_IF_SELECT: Chip to program: 0: rf, 1: if.
458 * RF_PLL_LD: Rf pll_ld status.
459 * RF_BUSY: 1: asic is busy execute rf programming.
460 */
461 #define PHY_CSR10 0x04d4
462 #define PHY_CSR10_RF_VALUE FIELD16(0x00ff)
463 #define PHY_CSR10_RF_NUMBER_OF_BITS FIELD16(0x1f00)
464 #define PHY_CSR10_RF_IF_SELECT FIELD16(0x2000)
465 #define PHY_CSR10_RF_PLL_LD FIELD16(0x4000)
466 #define PHY_CSR10_RF_BUSY FIELD16(0x8000)
467
468 /*
469 * STA_CSR0: FCS error count.
470 * FCS_ERROR: FCS error count, cleared when read.
471 */
472 #define STA_CSR0 0x04e0
473 #define STA_CSR0_FCS_ERROR FIELD16(0xffff)
474
475 /*
476 * Statistic Register.
477 * STA_CSR1: PLCP error.
478 * STA_CSR2: LONG error.
479 * STA_CSR3: CCA false alarm.
480 * STA_CSR4: RX FIFO overflow.
481 * STA_CSR5: Beacon sent counter.
482 */
483 #define STA_CSR1 0x04e2
484 #define STA_CSR2 0x04e4
485 #define STA_CSR3 0x04e6
486 #define STA_CSR4 0x04e8
487 #define STA_CSR5 0x04ea
488 #define STA_CSR6 0x04ec
489 #define STA_CSR7 0x04ee
490 #define STA_CSR8 0x04f0
491 #define STA_CSR9 0x04f2
492 #define STA_CSR10 0x04f4
493
494 /*
495 * RF registers.
496 */
497 #define RF1_TUNER FIELD32(0x00020000)
498 #define RF3_TUNER FIELD32(0x00000100)
499 #define RF3_TXPOWER FIELD32(0x00003e00)
500
501 /*
502 * EEPROM contents.
503 */
504
505 /*
506 * HW MAC address.
507 */
508 #define EEPROM_MAC_ADDR_0 0x0002
509 #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
510 #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
511 #define EEPROM_MAC_ADDR1 0x0003
512 #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
513 #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
514 #define EEPROM_MAC_ADDR_2 0x0004
515 #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
516 #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
517
518 /*
519 * EEPROM antenna.
520 * ANTENNA_NUM: Number of antenna's.
521 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
522 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
523 * LED_MODE: 0: default, 1: TX/RX activity, 2: Single (ignore link), 3: rsvd.
524 * DYN_TXAGC: Dynamic TX AGC control.
525 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
526 * RF_TYPE: Rf_type of this adapter.
527 */
528 #define EEPROM_ANTENNA 0x000b
529 #define EEPROM_ANTENNA_NUM FIELD16(0x0003)
530 #define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
531 #define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
532 #define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0)
533 #define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
534 #define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
535 #define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
536
537 /*
538 * EEPROM NIC config.
539 * CARDBUS_ACCEL: 0: enable, 1: disable.
540 * DYN_BBP_TUNE: 0: enable, 1: disable.
541 * CCK_TX_POWER: CCK TX power compensation.
542 */
543 #define EEPROM_NIC 0x000c
544 #define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001)
545 #define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002)
546 #define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c)
547
548 /*
549 * EEPROM geography.
550 * GEO: Default geography setting for device.
551 */
552 #define EEPROM_GEOGRAPHY 0x000d
553 #define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00)
554
555 /*
556 * EEPROM BBP.
557 */
558 #define EEPROM_BBP_START 0x000e
559 #define EEPROM_BBP_SIZE 16
560 #define EEPROM_BBP_VALUE FIELD16(0x00ff)
561 #define EEPROM_BBP_REG_ID FIELD16(0xff00)
562
563 /*
564 * EEPROM TXPOWER
565 */
566 #define EEPROM_TXPOWER_START 0x001e
567 #define EEPROM_TXPOWER_SIZE 7
568 #define EEPROM_TXPOWER_1 FIELD16(0x00ff)
569 #define EEPROM_TXPOWER_2 FIELD16(0xff00)
570
571 /*
572 * EEPROM Tuning threshold
573 */
574 #define EEPROM_BBPTUNE 0x0030
575 #define EEPROM_BBPTUNE_THRESHOLD FIELD16(0x00ff)
576
577 /*
578 * EEPROM BBP R24 Tuning.
579 */
580 #define EEPROM_BBPTUNE_R24 0x0031
581 #define EEPROM_BBPTUNE_R24_LOW FIELD16(0x00ff)
582 #define EEPROM_BBPTUNE_R24_HIGH FIELD16(0xff00)
583
584 /*
585 * EEPROM BBP R25 Tuning.
586 */
587 #define EEPROM_BBPTUNE_R25 0x0032
588 #define EEPROM_BBPTUNE_R25_LOW FIELD16(0x00ff)
589 #define EEPROM_BBPTUNE_R25_HIGH FIELD16(0xff00)
590
591 /*
592 * EEPROM BBP R24 Tuning.
593 */
594 #define EEPROM_BBPTUNE_R61 0x0033
595 #define EEPROM_BBPTUNE_R61_LOW FIELD16(0x00ff)
596 #define EEPROM_BBPTUNE_R61_HIGH FIELD16(0xff00)
597
598 /*
599 * EEPROM BBP VGC Tuning.
600 */
601 #define EEPROM_BBPTUNE_VGC 0x0034
602 #define EEPROM_BBPTUNE_VGCUPPER FIELD16(0x00ff)
603
604 /*
605 * EEPROM BBP R17 Tuning.
606 */
607 #define EEPROM_BBPTUNE_R17 0x0035
608 #define EEPROM_BBPTUNE_R17_LOW FIELD16(0x00ff)
609 #define EEPROM_BBPTUNE_R17_HIGH FIELD16(0xff00)
610
611 /*
612 * RSSI <-> dBm offset calibration
613 */
614 #define EEPROM_CALIBRATE_OFFSET 0x0036
615 #define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff)
616
617 /*
618 * BBP content.
619 * The wordsize of the BBP is 8 bits.
620 */
621
622 /*
623 * BBP_R2: TX antenna control
624 */
625 #define BBP_R2_TX_ANTENNA FIELD8(0x03)
626 #define BBP_R2_TX_IQ_FLIP FIELD8(0x04)
627
628 /*
629 * BBP_R14: RX antenna control
630 */
631 #define BBP_R14_RX_ANTENNA FIELD8(0x03)
632 #define BBP_R14_RX_IQ_FLIP FIELD8(0x04)
633
634 /*
635 * DMA descriptor defines.
636 */
637 #define TXD_DESC_SIZE ( 5 * sizeof(struct data_desc) )
638 #define RXD_DESC_SIZE ( 4 * sizeof(struct data_desc) )
639
640 /*
641 * TX descriptor format for TX, PRIO, ATIM and Beacon Ring.
642 */
643
644 /*
645 * Word0
646 */
647 #define TXD_W0_PACKET_ID FIELD32(0x0000000f)
648 #define TXD_W0_RETRY_LIMIT FIELD32(0x000000f0)
649 #define TXD_W0_MORE_FRAG FIELD32(0x00000100)
650 #define TXD_W0_ACK FIELD32(0x00000200)
651 #define TXD_W0_TIMESTAMP FIELD32(0x00000400)
652 #define TXD_W0_OFDM FIELD32(0x00000800)
653 #define TXD_W0_NEW_SEQ FIELD32(0x00001000)
654 #define TXD_W0_IFS FIELD32(0x00006000)
655 #define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
656 #define TXD_W0_CIPHER FIELD32(0x20000000)
657 #define TXD_W0_KEY_ID FIELD32(0xc0000000)
658
659 /*
660 * Word1
661 */
662 #define TXD_W1_IV_OFFSET FIELD32(0x0000003f)
663 #define TXD_W1_AIFS FIELD32(0x000000c0)
664 #define TXD_W1_CWMIN FIELD32(0x00000f00)
665 #define TXD_W1_CWMAX FIELD32(0x0000f000)
666
667 /*
668 * Word2: PLCP information
669 */
670 #define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff)
671 #define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00)
672 #define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
673 #define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000)
674
675 /*
676 * Word3
677 */
678 #define TXD_W3_IV FIELD32(0xffffffff)
679
680 /*
681 * Word4
682 */
683 #define TXD_W4_EIV FIELD32(0xffffffff)
684
685 /*
686 * RX descriptor format for RX Ring.
687 */
688
689 /*
690 * Word0
691 */
692 #define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002)
693 #define RXD_W0_MULTICAST FIELD32(0x00000004)
694 #define RXD_W0_BROADCAST FIELD32(0x00000008)
695 #define RXD_W0_MY_BSS FIELD32(0x00000010)
696 #define RXD_W0_CRC FIELD32(0x00000020)
697 #define RXD_W0_OFDM FIELD32(0x00000040)
698 #define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080)
699 #define RXD_W0_CIPHER FIELD32(0x00000100)
700 #define RXD_W0_CI_ERROR FIELD32(0x00000200)
701 #define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
702
703 /*
704 * Word1
705 */
706 #define RXD_W1_RSSI FIELD32(0x000000ff)
707 #define RXD_W1_SIGNAL FIELD32(0x0000ff00)
708
709 /*
710 * Word2
711 */
712 #define RXD_W2_IV FIELD32(0xffffffff)
713
714 /*
715 * Word3
716 */
717 #define RXD_W3_EIV FIELD32(0xffffffff)
718
719 /*
720 * Macro's for converting txpower from EEPROM to dscape value
721 * and from dscape value to register value.
722 */
723 #define MIN_TXPOWER 0
724 #define MAX_TXPOWER 31
725 #define DEFAULT_TXPOWER 24
726
727 #define TXPOWER_FROM_DEV(__txpower) \
728 ({ \
729 ((__txpower) > MAX_TXPOWER) ? \
730 DEFAULT_TXPOWER : (__txpower); \
731 })
732
733 #define TXPOWER_TO_DEV(__txpower) \
734 ({ \
735 ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
736 (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
737 (__txpower)); \
738 })
739
740 #endif /* RT2500USB_H */
This page took 0.095479 seconds and 5 git commands to generate.