[lantiq] Support booting the Speedport W502V using BRN-BOOT.
[openwrt.git] / target / linux / lantiq / patches / 0021-MIPS-lantiq-adds-cache-split.patch
1 From 0f85e79f6f01f50cb703866a555085a9c65bad2f Mon Sep 17 00:00:00 2001
2 From: John Crispin <blogic@openwrt.org>
3 Date: Thu, 29 Sep 2011 20:31:54 +0200
4 Subject: [PATCH 21/24] MIPS: lantiq: adds cache split
5
6 ---
7 arch/mips/Kconfig | 22 ++++++
8 arch/mips/kernel/vpe.c | 66 ++++++++++++++++++
9 arch/mips/mm/c-r4k.c | 172 ++++++++++++++++++++++++++++++++++++++++++++++++
10 3 files changed, 260 insertions(+), 0 deletions(-)
11
12 --- a/arch/mips/Kconfig
13 +++ b/arch/mips/Kconfig
14 @@ -1922,6 +1922,28 @@ config IFX_VPE_EXT
15 help
16 IFX included extensions in APRP
17
18 +config IFX_VPE_CACHE_SPLIT
19 + bool "IFX Cache Split Ways"
20 + depends on IFX_VPE_EXT
21 + help
22 + IFX extension for reserving (splitting) cache ways among VPEs. You must
23 + give kernel command line arguments vpe_icache_shared=0 or
24 + vpe_dcache_shared=0 to enable splitting of icache or dcache
25 + respectively. Then you can specify which cache ways should be
26 + assigned to which VPE. There are total 8 cache ways, 4 each
27 + for dcache and icache: dcache_way0, dcache_way1,dcache_way2,
28 + dcache_way3 and icache_way0,icache_way1, icache_way2,icache_way3.
29 +
30 + For example, if you specify vpe_icache_shared=0 and icache_way2=1,
31 + then the 3rd icache way will be assigned to VPE0 and denied in VPE1.
32 +
33 + For icache, software is required to make at least one cache way available
34 + for a VPE at all times i.e., one can't assign all the icache ways to one
35 + VPE.
36 +
37 + By default, vpe_dcache_shared and vpe_icache_shared are set to 1
38 + (i.e., both icache and dcache are shared among VPEs)
39 +
40 config PERFCTRS
41 bool "34K Performance counters"
42 depends on MIPS_MT && PROC_FS
43 --- a/arch/mips/kernel/vpe.c
44 +++ b/arch/mips/kernel/vpe.c
45 @@ -128,6 +128,13 @@ __setup("vpe1_wdog_timeout=", wdog_timeo
46 EXPORT_SYMBOL(vpe1_wdog_timeout);
47
48 #endif
49 +
50 +#ifdef CONFIG_IFX_VPE_CACHE_SPLIT /* Code for splitting the cache ways among VPEs. */
51 +extern int vpe_icache_shared,vpe_dcache_shared;
52 +extern int icache_way0,icache_way1,icache_way2,icache_way3;
53 +extern int dcache_way0,dcache_way1,dcache_way2,dcache_way3;
54 +#endif
55 +
56 /* grab the likely amount of memory we will need. */
57 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
58 #define P_SIZE (2 * 1024 * 1024)
59 @@ -866,6 +873,65 @@ static int vpe_run(struct vpe * v)
60 /* enable this VPE */
61 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
62
63 +#ifdef CONFIG_IFX_VPE_CACHE_SPLIT
64 + if ( (!vpe_icache_shared) || (!vpe_dcache_shared) ) {
65 +
66 + /* PCP bit must be 1 to split the cache */
67 + if(read_c0_mvpconf0() & MVPCONF0_PCP) {
68 +
69 + if ( !vpe_icache_shared ){
70 + write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0()) & ~VPECONF0_ICS);
71 +
72 + /*
73 + * If any cache way is 1, then that way is denied
74 + * in VPE1. Otherwise assign that way to VPE1.
75 + */
76 + if (!icache_way0)
77 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX0 );
78 + else
79 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX0 );
80 + if (!icache_way1)
81 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX1 );
82 + else
83 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX1 );
84 + if (!icache_way2)
85 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX2 );
86 + else
87 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX2 );
88 + if (!icache_way3)
89 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX3 );
90 + else
91 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX3 );
92 + }
93 +
94 + if ( !vpe_dcache_shared ) {
95 + write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0()) & ~VPECONF0_DCS);
96 +
97 + /*
98 + * If any cache way is 1, then that way is denied
99 + * in VPE1. Otherwise assign that way to VPE1.
100 + */
101 + if (!dcache_way0)
102 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX0 );
103 + else
104 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX0 );
105 + if (!dcache_way1)
106 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX1 );
107 + else
108 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX1 );
109 + if (!dcache_way2)
110 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX2 );
111 + else
112 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX2 );
113 + if (!dcache_way3)
114 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX3 );
115 + else
116 + write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX3 );
117 + }
118 + }
119 + }
120 +#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
121 +
122 /* clear out any left overs from a previous program */
123 write_vpe_c0_status(0);
124 write_vpe_c0_cause(0);
125 --- a/arch/mips/mm/c-r4k.c
126 +++ b/arch/mips/mm/c-r4k.c
127 @@ -1350,6 +1350,106 @@ static int __init setcoherentio(char *st
128 __setup("coherentio", setcoherentio);
129 #endif
130
131 +#ifdef CONFIG_IFX_VPE_CACHE_SPLIT /* Code for splitting the cache ways among VPEs. */
132 +
133 +#include <asm/mipsmtregs.h>
134 +
135 +/*
136 + * By default, vpe_icache_shared and vpe_dcache_shared
137 + * values are 1 i.e., both icache and dcache are shared
138 + * among the VPEs.
139 + */
140 +
141 +int vpe_icache_shared = 1;
142 +static int __init vpe_icache_shared_val(char *str)
143 +{
144 + get_option(&str, &vpe_icache_shared);
145 + return 1;
146 +}
147 +__setup("vpe_icache_shared=", vpe_icache_shared_val);
148 +EXPORT_SYMBOL(vpe_icache_shared);
149 +
150 +int vpe_dcache_shared = 1;
151 +static int __init vpe_dcache_shared_val(char *str)
152 +{
153 + get_option(&str, &vpe_dcache_shared);
154 + return 1;
155 +}
156 +__setup("vpe_dcache_shared=", vpe_dcache_shared_val);
157 +EXPORT_SYMBOL(vpe_dcache_shared);
158 +
159 +/*
160 + * Software is required to make atleast one icache
161 + * way available for a VPE at all times i.e., one
162 + * can't assign all the icache ways to one VPE.
163 + */
164 +
165 +int icache_way0 = 0;
166 +static int __init icache_way0_val(char *str)
167 +{
168 + get_option(&str, &icache_way0);
169 + return 1;
170 +}
171 +__setup("icache_way0=", icache_way0_val);
172 +
173 +int icache_way1 = 0;
174 +static int __init icache_way1_val(char *str)
175 +{
176 + get_option(&str, &icache_way1);
177 + return 1;
178 +}
179 +__setup("icache_way1=", icache_way1_val);
180 +
181 +int icache_way2 = 0;
182 +static int __init icache_way2_val(char *str)
183 +{
184 + get_option(&str, &icache_way2);
185 + return 1;
186 +}
187 +__setup("icache_way2=", icache_way2_val);
188 +
189 +int icache_way3 = 0;
190 +static int __init icache_way3_val(char *str)
191 +{
192 + get_option(&str, &icache_way3);
193 + return 1;
194 +}
195 +__setup("icache_way3=", icache_way3_val);
196 +
197 +int dcache_way0 = 0;
198 +static int __init dcache_way0_val(char *str)
199 +{
200 + get_option(&str, &dcache_way0);
201 + return 1;
202 +}
203 +__setup("dcache_way0=", dcache_way0_val);
204 +
205 +int dcache_way1 = 0;
206 +static int __init dcache_way1_val(char *str)
207 +{
208 + get_option(&str, &dcache_way1);
209 + return 1;
210 +}
211 +__setup("dcache_way1=", dcache_way1_val);
212 +
213 +int dcache_way2 = 0;
214 +static int __init dcache_way2_val(char *str)
215 +{
216 + get_option(&str, &dcache_way2);
217 + return 1;
218 +}
219 +__setup("dcache_way2=", dcache_way2_val);
220 +
221 +int dcache_way3 = 0;
222 +static int __init dcache_way3_val(char *str)
223 +{
224 + get_option(&str, &dcache_way3);
225 + return 1;
226 +}
227 +__setup("dcache_way3=", dcache_way3_val);
228 +
229 +#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
230 +
231 void __cpuinit r4k_cache_init(void)
232 {
233 extern void build_clear_page(void);
234 @@ -1369,6 +1469,78 @@ void __cpuinit r4k_cache_init(void)
235 break;
236 }
237
238 +#ifdef CONFIG_IFX_VPE_CACHE_SPLIT
239 + /*
240 + * We split the cache ways appropriately among the VPEs
241 + * based on cache ways values we received as command line
242 + * arguments
243 + */
244 + if ( (!vpe_icache_shared) || (!vpe_dcache_shared) ){
245 +
246 + /* PCP bit must be 1 to split the cache */
247 + if(read_c0_mvpconf0() & MVPCONF0_PCP) {
248 +
249 + /* Set CPA bit which enables us to modify VPEOpt register */
250 + write_c0_mvpcontrol((read_c0_mvpcontrol()) | MVPCONTROL_CPA);
251 +
252 + if ( !vpe_icache_shared ){
253 + write_c0_vpeconf0((read_c0_vpeconf0()) & ~VPECONF0_ICS);
254 + /*
255 + * If any cache way is 1, then that way is denied
256 + * in VPE0. Otherwise assign that way to VPE0.
257 + */
258 + printk(KERN_DEBUG "icache is split\n");
259 + printk(KERN_DEBUG "icache_way0=%d icache_way1=%d icache_way2=%d icache_way3=%d\n",
260 + icache_way0, icache_way1,icache_way2, icache_way3);
261 + if (icache_way0)
262 + write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX0 );
263 + else
264 + write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX0 );
265 + if (icache_way1)
266 + write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX1 );
267 + else
268 + write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX1 );
269 + if (icache_way2)
270 + write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX2 );
271 + else
272 + write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX2 );
273 + if (icache_way3)
274 + write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX3 );
275 + else
276 + write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX3 );
277 + }
278 +
279 + if ( !vpe_dcache_shared ) {
280 + /*
281 + * If any cache way is 1, then that way is denied
282 + * in VPE0. Otherwise assign that way to VPE0.
283 + */
284 + printk(KERN_DEBUG "dcache is split\n");
285 + printk(KERN_DEBUG "dcache_way0=%d dcache_way1=%d dcache_way2=%d dcache_way3=%d\n",
286 + dcache_way0, dcache_way1, dcache_way2, dcache_way3);
287 + write_c0_vpeconf0((read_c0_vpeconf0()) & ~VPECONF0_DCS);
288 + if (dcache_way0)
289 + write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX0 );
290 + else
291 + write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX0 );
292 + if (dcache_way1)
293 + write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX1 );
294 + else
295 + write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX1 );
296 + if (dcache_way2)
297 + write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX2 );
298 + else
299 + write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX2 );
300 + if (dcache_way3)
301 + write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX3 );
302 + else
303 + write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX3 );
304 + }
305 + }
306 + }
307 +
308 +#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
309 +
310 probe_pcache();
311 setup_scache();
312
313 --- a/arch/mips/lantiq/setup.c
314 +++ b/arch/mips/lantiq/setup.c
315 @@ -18,10 +18,11 @@
316 #include "devices.h"
317 #include "prom.h"
318
319 +/* assume 16M as default incase uboot fails to pass proper ramsize */
320 +unsigned long physical_memsize = 16L;
321 +
322 void __init plat_mem_setup(void)
323 {
324 - /* assume 16M as default incase uboot fails to pass proper ramsize */
325 - unsigned long memsize = 16;
326 char **envp = (char **) KSEG1ADDR(fw_arg2);
327
328 ioport_resource.start = IOPORT_RESOURCE_START;
329 @@ -35,13 +36,13 @@ void __init plat_mem_setup(void)
330 char *e = (char *)KSEG1ADDR(*envp);
331 if (!strncmp(e, "memsize=", 8)) {
332 e += 8;
333 - if (strict_strtoul(e, 0, &memsize))
334 + if (strict_strtoul(e, 0, &physical_memsize))
335 pr_warn("bad memsize specified\n");
336 }
337 envp++;
338 }
339 - memsize *= 1024 * 1024;
340 - add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
341 + physical_memsize *= 1024 * 1024;
342 + add_memory_region(0x00000000, physical_memsize, BOOT_MEM_RAM);
343 }
344
345 static int __init
This page took 0.053808 seconds and 5 git commands to generate.