ramips: enable ethernet driver for rt288x
[openwrt.git] / target / linux / ar71xx / base-files / etc / defconfig / tl-wr1043nd / network
1 config 'interface' 'loopback'
2 option 'ifname' 'lo'
3 option 'proto' 'static'
4 option 'ipaddr' '127.0.0.1'
5 option 'netmask' '255.0.0.0'
6
7 config 'interface' 'lan'
8 option 'ifname' 'eth0.1'
9 option 'type' 'bridge'
10 option 'proto' 'static'
11 option 'ipaddr' '192.168.1.1'
12 option 'netmask' '255.255.255.0'
13
14 config 'interface' 'wan'
15 option 'ifname' 'eth0.2'
16 option 'proto' 'dhcp'
17
18 config 'switch'
19 option 'name' 'rtl8366rb'
20 option 'reset' '1'
21 option 'enable_vlan' '1'
22
23 config 'switch_vlan'
24 option 'device' 'rtl8366rb'
25 option 'vlan' '1'
26 option 'ports' '1 2 3 4 5t'
27
28 config 'switch_vlan'
29 option 'device' 'rtl8366rb'
30 option 'vlan' '2'
31 option 'ports' '0 5t'
This page took 0.038223 seconds and 5 git commands to generate.