[adm5120] add missing buttons device for RB-1xx boards, thanks to Christophe Lucas
[openwrt.git] / target / linux / generic-2.6 / image / lzma-loader / src / start.S
1 #include <asm/asm.h>
2 #include <asm/regdef.h>
3
4 #define KSEG0 0x80000000
5
6 #define C0_CONFIG $16
7 #define C0_TAGLO $28
8 #define C0_TAGHI $29
9
10 #define CONF1_DA_SHIFT 7 /* D$ associativity */
11 #define CONF1_DA_MASK 0x00000380
12 #define CONF1_DA_BASE 1
13 #define CONF1_DL_SHIFT 10 /* D$ line size */
14 #define CONF1_DL_MASK 0x00001c00
15 #define CONF1_DL_BASE 2
16 #define CONF1_DS_SHIFT 13 /* D$ sets/way */
17 #define CONF1_DS_MASK 0x0000e000
18 #define CONF1_DS_BASE 64
19 #define CONF1_IA_SHIFT 16 /* I$ associativity */
20 #define CONF1_IA_MASK 0x00070000
21 #define CONF1_IA_BASE 1
22 #define CONF1_IL_SHIFT 19 /* I$ line size */
23 #define CONF1_IL_MASK 0x00380000
24 #define CONF1_IL_BASE 2
25 #define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
26 #define CONF1_IS_MASK 0x01c00000
27 #define CONF1_IS_BASE 64
28
29 #define Index_Invalidate_I 0x00
30 #define Index_Writeback_Inv_D 0x01
31
32 LEAF(_start)
33
34 .set mips32
35 .set noreorder
36
37 /* save argument registers */
38 move t4, a0
39 move t5, a1
40 move t6, a2
41 move t7, a3
42
43 /* set up stack */
44 li sp, RAMSTART + RAMSIZE - 16
45
46 #ifdef IMAGE_COPY
47 /* Copy decompressor code to the right place */
48 li t2, LOADADDR
49 add a0, t2, 0
50 la a1, code_start
51 la a2, code_stop
52 $L1:
53 lw t0, 0(a1)
54 sw t0, 0(a0)
55 add a1, 4
56 add a0, 4
57 blt a1, a2, $L1
58 nop
59 #endif
60
61 /* At this point we need to invalidate dcache and */
62 /* icache before jumping to new code */
63
64 1: /* Get cache sizes */
65 mfc0 s0,C0_CONFIG,1
66
67 li s1,CONF1_DL_MASK
68 and s1,s0
69 beq s1,zero,nodc
70 nop
71
72 srl s1,CONF1_DL_SHIFT
73 li t0,CONF1_DL_BASE
74 sll s1,t0,s1 /* s1 has D$ cache line size */
75
76 li s2,CONF1_DA_MASK
77 and s2,s0
78 srl s2,CONF1_DA_SHIFT
79 addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */
80
81 li t0,CONF1_DS_MASK
82 and t0,s0
83 srl t0,CONF1_DS_SHIFT
84 li s3,CONF1_DS_BASE
85 sll s3,s3,t0 /* s3 has D$ sets per way */
86
87 multu s2,s3 /* sets/way * associativity */
88 mflo t0 /* total cache lines */
89
90 multu s1,t0 /* D$ linesize * lines */
91 mflo s2 /* s2 is now D$ size in bytes */
92
93 /* Initilize the D$: */
94 mtc0 zero,C0_TAGLO
95 mtc0 zero,C0_TAGHI
96
97 li t0,KSEG0 /* Just an address for the first $ line */
98 addu t1,t0,s2 /* + size of cache == end */
99
100 1: cache Index_Writeback_Inv_D,0(t0)
101 bne t0,t1,1b
102 addu t0,s1
103
104 nodc:
105 /* Now we get to do it all again for the I$ */
106
107 move s3,zero /* just in case there is no icache */
108 move s4,zero
109
110 li t0,CONF1_IL_MASK
111 and t0,s0
112 beq t0,zero,noic
113 nop
114
115 srl t0,CONF1_IL_SHIFT
116 li s3,CONF1_IL_BASE
117 sll s3,t0 /* s3 has I$ cache line size */
118
119 li t0,CONF1_IA_MASK
120 and t0,s0
121 srl t0,CONF1_IA_SHIFT
122 addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */
123
124 li t0,CONF1_IS_MASK
125 and t0,s0
126 srl t0,CONF1_IS_SHIFT
127 li s5,CONF1_IS_BASE
128 sll s5,t0 /* s5 has I$ sets per way */
129
130 multu s4,s5 /* sets/way * associativity */
131 mflo t0 /* s4 is now total cache lines */
132
133 multu s3,t0 /* I$ linesize * lines */
134 mflo s4 /* s4 is cache size in bytes */
135
136 /* Initilize the I$: */
137 mtc0 zero,C0_TAGLO
138 mtc0 zero,C0_TAGHI
139
140 li t0,KSEG0 /* Just an address for the first $ line */
141 addu t1,t0,s4 /* + size of cache == end */
142
143 1: cache Index_Invalidate_I,0(t0)
144 bne t0,t1,1b
145 addu t0,s3
146 noic:
147 /* jump to main */
148 move a0,s3 /* icache line size */
149 move a1,s4 /* icache size */
150 move a2,s1 /* dcache line size */
151 #ifdef IMAGE_COPY
152 jal t2
153 #else
154 jal entry
155 #endif
156 move a3,s2 /* dcache size */
157
158 .set reorder
159 END(_start)
160
This page took 0.053035 seconds and 5 git commands to generate.