target/linux/brcm47xx/patches-3.2/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch

   1 From 77190e21ed262397eb924e6d48e12ecf3e9f6316 Mon Sep 17 00:00:00 2001
   2 From: Hauke Mehrtens <hauke@hauke-m.de>
   3 Date: Sat, 26 Nov 2011 21:36:50 +0100
   4 Subject: [PATCH 21/30] USB: OHCI: remove old SSB OHCI driver
   5
   6 This is now replaced by the new ssb USB driver, which also supports
   7 devices with an EHCI controller.
   8
   9 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  10 ---
  11  drivers/usb/host/Kconfig    |   13 --
  12  drivers/usb/host/ohci-hcd.c |   19 ---
  13  drivers/usb/host/ohci-ssb.c |  260 -------------------------------------------
  14  3 files changed, 0 insertions(+), 292 deletions(-)
  15  delete mode 100644 drivers/usb/host/ohci-ssb.c
  16
  17 --- a/drivers/usb/host/Kconfig
  18 +++ b/drivers/usb/host/Kconfig
  19 @@ -351,19 +351,6 @@ config USB_OHCI_HCD_PCI
  20           Enables support for PCI-bus plug-in USB controller cards.
  21           If unsure, say Y.
  22
  23 -config USB_OHCI_HCD_SSB
  24 -       bool "OHCI support for Broadcom SSB OHCI core"
  25 -       depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
  26 -       default n
  27 -       ---help---
  28 -         Support for the Sonics Silicon Backplane (SSB) attached
  29 -         Broadcom USB OHCI core.
  30 -
  31 -         This device is present in some embedded devices with
  32 -         Broadcom based SSB bus.
  33 -
  34 -         If unsure, say N.
  35 -
  36  config USB_OHCI_SH
  37         bool "OHCI support for SuperH USB controller"
  38         depends on USB_OHCI_HCD && SUPERH
  39 --- a/drivers/usb/host/ohci-hcd.c
  40 +++ b/drivers/usb/host/ohci-hcd.c
  41 @@ -1076,11 +1076,6 @@ MODULE_LICENSE ("GPL");
  42  #define PS3_SYSTEM_BUS_DRIVER  ps3_ohci_driver
  43  #endif
  44
  45 -#ifdef CONFIG_USB_OHCI_HCD_SSB
  46 -#include "ohci-ssb.c"
  47 -#define SSB_OHCI_DRIVER                ssb_ohci_driver
  48 -#endif
  49 -
  50  #ifdef CONFIG_MFD_SM501
  51  #include "ohci-sm501.c"
  52  #define SM501_OHCI_DRIVER      ohci_hcd_sm501_driver
  53 @@ -1130,7 +1125,6 @@ MODULE_LICENSE ("GPL");
  54         !defined(PS3_SYSTEM_BUS_DRIVER) && \
  55         !defined(SM501_OHCI_DRIVER) && \
  56         !defined(TMIO_OHCI_DRIVER) && \
  57 -       !defined(SSB_OHCI_DRIVER) && \
  58         !defined(PLATFORM_OHCI_DRIVER)
  59  #error "missing bus glue for ohci-hcd"
  60  #endif
  61 @@ -1197,12 +1191,6 @@ static int __init ohci_hcd_mod_init(void
  62                 goto error_pci;
  63  #endif
  64
  65 -#ifdef SSB_OHCI_DRIVER
  66 -       retval = ssb_driver_register(&SSB_OHCI_DRIVER);
  67 -       if (retval)
  68 -               goto error_ssb;
  69 -#endif
  70 -
  71  #ifdef SM501_OHCI_DRIVER
  72         retval = platform_driver_register(&SM501_OHCI_DRIVER);
  73         if (retval < 0)
  74 @@ -1236,10 +1224,6 @@ static int __init ohci_hcd_mod_init(void
  75         platform_driver_unregister(&SM501_OHCI_DRIVER);
  76   error_sm501:
  77  #endif
  78 -#ifdef SSB_OHCI_DRIVER
  79 -       ssb_driver_unregister(&SSB_OHCI_DRIVER);
  80 - error_ssb:
  81 -#endif
  82  #ifdef PCI_DRIVER
  83         pci_unregister_driver(&PCI_DRIVER);
  84   error_pci:
  85 @@ -1290,9 +1274,6 @@ static void __exit ohci_hcd_mod_exit(voi
  86  #ifdef SM501_OHCI_DRIVER
  87         platform_driver_unregister(&SM501_OHCI_DRIVER);
  88  #endif
  89 -#ifdef SSB_OHCI_DRIVER
  90 -       ssb_driver_unregister(&SSB_OHCI_DRIVER);
  91 -#endif
  92  #ifdef PCI_DRIVER
  93         pci_unregister_driver(&PCI_DRIVER);
  94  #endif
  95 --- a/drivers/usb/host/ohci-ssb.c
  96 +++ /dev/null
  97 @@ -1,260 +0,0 @@
  98 -/*
  99 - * Sonics Silicon Backplane
 100 - * Broadcom USB-core OHCI driver
 101 - *
 102 - * Copyright 2007 Michael Buesch <m@bues.ch>
 103 - *
 104 - * Derived from the OHCI-PCI driver
 105 - * Copyright 1999 Roman Weissgaerber
 106 - * Copyright 2000-2002 David Brownell
 107 - * Copyright 1999 Linus Torvalds
 108 - * Copyright 1999 Gregory P. Smith
 109 - *
 110 - * Derived from the USBcore related parts of Broadcom-SB
 111 - * Copyright 2005 Broadcom Corporation
 112 - *
 113 - * Licensed under the GNU/GPL. See COPYING for details.
 114 - */
 115 -#include <linux/ssb/ssb.h>
 116 -
 117 -
 118 -#define SSB_OHCI_TMSLOW_HOSTMODE       (1 << 29)
 119 -
 120 -struct ssb_ohci_device {
 121 -       struct ohci_hcd ohci; /* _must_ be at the beginning. */
 122 -
 123 -       u32 enable_flags;
 124 -};
 125 -
 126 -static inline
 127 -struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
 128 -{
 129 -       return (struct ssb_ohci_device *)(hcd->hcd_priv);
 130 -}
 131 -
 132 -
 133 -static int ssb_ohci_reset(struct usb_hcd *hcd)
 134 -{
 135 -       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
 136 -       struct ohci_hcd *ohci = &ohcidev->ohci;
 137 -       int err;
 138 -
 139 -       ohci_hcd_init(ohci);
 140 -       err = ohci_init(ohci);
 141 -
 142 -       return err;
 143 -}
 144 -
 145 -static int ssb_ohci_start(struct usb_hcd *hcd)
 146 -{
 147 -       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
 148 -       struct ohci_hcd *ohci = &ohcidev->ohci;
 149 -       int err;
 150 -
 151 -       err = ohci_run(ohci);
 152 -       if (err < 0) {
 153 -               ohci_err(ohci, "can't start\n");
 154 -               ohci_stop(hcd);
 155 -       }
 156 -
 157 -       return err;
 158 -}
 159 -
 160 -static const struct hc_driver ssb_ohci_hc_driver = {
 161 -       .description            = "ssb-usb-ohci",
 162 -       .product_desc           = "SSB OHCI Controller",
 163 -       .hcd_priv_size          = sizeof(struct ssb_ohci_device),
 164 -
 165 -       .irq                    = ohci_irq,
 166 -       .flags                  = HCD_MEMORY | HCD_USB11,
 167 -
 168 -       .reset                  = ssb_ohci_reset,
 169 -       .start                  = ssb_ohci_start,
 170 -       .stop                   = ohci_stop,
 171 -       .shutdown               = ohci_shutdown,
 172 -
 173 -       .urb_enqueue            = ohci_urb_enqueue,
 174 -       .urb_dequeue            = ohci_urb_dequeue,
 175 -       .endpoint_disable       = ohci_endpoint_disable,
 176 -
 177 -       .get_frame_number       = ohci_get_frame,
 178 -
 179 -       .hub_status_data        = ohci_hub_status_data,
 180 -       .hub_control            = ohci_hub_control,
 181 -#ifdef CONFIG_PM
 182 -       .bus_suspend            = ohci_bus_suspend,
 183 -       .bus_resume             = ohci_bus_resume,
 184 -#endif
 185 -
 186 -       .start_port_reset       = ohci_start_port_reset,
 187 -};
 188 -
 189 -static void ssb_ohci_detach(struct ssb_device *dev)
 190 -{
 191 -       struct usb_hcd *hcd = ssb_get_drvdata(dev);
 192 -
 193 -       if (hcd->driver->shutdown)
 194 -               hcd->driver->shutdown(hcd);
 195 -       usb_remove_hcd(hcd);
 196 -       iounmap(hcd->regs);
 197 -       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 198 -       usb_put_hcd(hcd);
 199 -       ssb_device_disable(dev, 0);
 200 -}
 201 -
 202 -static int ssb_ohci_attach(struct ssb_device *dev)
 203 -{
 204 -       struct ssb_ohci_device *ohcidev;
 205 -       struct usb_hcd *hcd;
 206 -       int err = -ENOMEM;
 207 -       u32 tmp, flags = 0;
 208 -
 209 -       if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
 210 -           dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
 211 -               return -EOPNOTSUPP;
 212 -
 213 -       if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
 214 -               /* Put the device into host-mode. */
 215 -               flags |= SSB_OHCI_TMSLOW_HOSTMODE;
 216 -               ssb_device_enable(dev, flags);
 217 -       } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
 218 -               /*
 219 -                * USB 2.0 special considerations:
 220 -                *
 221 -                * In addition to the standard SSB reset sequence, the Host
 222 -                * Control Register must be programmed to bring the USB core
 223 -                * and various phy components out of reset.
 224 -                */
 225 -               ssb_device_enable(dev, 0);
 226 -               ssb_write32(dev, 0x200, 0x7ff);
 227 -
 228 -               /* Change Flush control reg */
 229 -               tmp = ssb_read32(dev, 0x400);
 230 -               tmp &= ~8;
 231 -               ssb_write32(dev, 0x400, tmp);
 232 -               tmp = ssb_read32(dev, 0x400);
 233 -
 234 -               /* Change Shim control reg */
 235 -               tmp = ssb_read32(dev, 0x304);
 236 -               tmp &= ~0x100;
 237 -               ssb_write32(dev, 0x304, tmp);
 238 -               tmp = ssb_read32(dev, 0x304);
 239 -
 240 -               udelay(1);
 241 -
 242 -               /* Work around for 5354 failures */
 243 -               if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
 244 -                       /* Change syn01 reg */
 245 -                       tmp = 0x00fe00fe;
 246 -                       ssb_write32(dev, 0x894, tmp);
 247 -
 248 -                       /* Change syn03 reg */
 249 -                       tmp = ssb_read32(dev, 0x89c);
 250 -                       tmp |= 0x1;
 251 -                       ssb_write32(dev, 0x89c, tmp);
 252 -               }
 253 -       } else
 254 -               ssb_device_enable(dev, 0);
 255 -
 256 -       hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
 257 -                       dev_name(dev->dev));
 258 -       if (!hcd)
 259 -               goto err_dev_disable;
 260 -       ohcidev = hcd_to_ssb_ohci(hcd);
 261 -       ohcidev->enable_flags = flags;
 262 -
 263 -       tmp = ssb_read32(dev, SSB_ADMATCH0);
 264 -       hcd->rsrc_start = ssb_admatch_base(tmp);
 265 -       hcd->rsrc_len = ssb_admatch_size(tmp);
 266 -       hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 267 -       if (!hcd->regs)
 268 -               goto err_put_hcd;
 269 -       err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
 270 -       if (err)
 271 -               goto err_iounmap;
 272 -
 273 -       ssb_set_drvdata(dev, hcd);
 274 -
 275 -       return err;
 276 -
 277 -err_iounmap:
 278 -       iounmap(hcd->regs);
 279 -err_put_hcd:
 280 -       usb_put_hcd(hcd);
 281 -err_dev_disable:
 282 -       ssb_device_disable(dev, flags);
 283 -       return err;
 284 -}
 285 -
 286 -static int ssb_ohci_probe(struct ssb_device *dev,
 287 -               const struct ssb_device_id *id)
 288 -{
 289 -       int err;
 290 -       u16 chipid_top;
 291 -
 292 -       /* USBcores are only connected on embedded devices. */
 293 -       chipid_top = (dev->bus->chip_id & 0xFF00);
 294 -       if (chipid_top != 0x4700 && chipid_top != 0x5300)
 295 -               return -ENODEV;
 296 -
 297 -       /* TODO: Probably need checks here; is the core connected? */
 298 -
 299 -       if (usb_disabled())
 300 -               return -ENODEV;
 301 -
 302 -       /* We currently always attach SSB_DEV_USB11_HOSTDEV
 303 -        * as HOST OHCI. If we want to attach it as Client device,
 304 -        * we must branch here and call into the (yet to
 305 -        * be written) Client mode driver. Same for remove(). */
 306 -
 307 -       err = ssb_ohci_attach(dev);
 308 -
 309 -       return err;
 310 -}
 311 -
 312 -static void ssb_ohci_remove(struct ssb_device *dev)
 313 -{
 314 -       ssb_ohci_detach(dev);
 315 -}
 316 -
 317 -#ifdef CONFIG_PM
 318 -
 319 -static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
 320 -{
 321 -       ssb_device_disable(dev, 0);
 322 -
 323 -       return 0;
 324 -}
 325 -
 326 -static int ssb_ohci_resume(struct ssb_device *dev)
 327 -{
 328 -       struct usb_hcd *hcd = ssb_get_drvdata(dev);
 329 -       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
 330 -
 331 -       ssb_device_enable(dev, ohcidev->enable_flags);
 332 -
 333 -       ohci_finish_controller_resume(hcd);
 334 -       return 0;
 335 -}
 336 -
 337 -#else /* !CONFIG_PM */
 338 -#define ssb_ohci_suspend       NULL
 339 -#define ssb_ohci_resume        NULL
 340 -#endif /* CONFIG_PM */
 341 -
 342 -static const struct ssb_device_id ssb_ohci_table[] = {
 343 -       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
 344 -       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
 345 -       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
 346 -       SSB_DEVTABLE_END
 347 -};
 348 -MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
 349 -
 350 -static struct ssb_driver ssb_ohci_driver = {
 351 -       .name           = KBUILD_MODNAME,
 352 -       .id_table       = ssb_ohci_table,
 353 -       .probe          = ssb_ohci_probe,
 354 -       .remove         = ssb_ohci_remove,
 355 -       .suspend        = ssb_ohci_suspend,
 356 -       .resume         = ssb_ohci_resume,
 357 -};