package/mac80211/patches/007-remove_unused_stuff.patch

   1 --- a/config.mk
   2 +++ b/config.mk
   3 @@ -153,77 +153,77 @@ CONFIG_CFG80211_DEFAULT_PS=y
   4  CONFIG_CFG80211_DEFAULT_PS_VALUE=1
   5  # CONFIG_CFG80211_REG_DEBUG=y
   6
   7 -CONFIG_LIB80211=m
   8 -CONFIG_LIB80211_CRYPT_WEP=m
   9 -CONFIG_LIB80211_CRYPT_CCMP=m
  10 -CONFIG_LIB80211_CRYPT_TKIP=m
  11 +# CONFIG_LIB80211=m
  12 +# CONFIG_LIB80211_CRYPT_WEP=m
  13 +# CONFIG_LIB80211_CRYPT_CCMP=m
  14 +# CONFIG_LIB80211_CRYPT_TKIP=m
  15  # CONFIG_LIB80211_DEBUG=y
  16
  17  CONFIG_WIRELESS_OLD_REGULATORY=n
  18
  19  # mac80211 test driver
  20 -CONFIG_MAC80211_HWSIM=m
  21 +# CONFIG_MAC80211_HWSIM=m
  22
  23  # PCI Drivers
  24  ifneq ($(CONFIG_PCI),)
  25
  26 -CONFIG_ATH5K=m
  27 +# CONFIG_ATH5K=m
  28  # CONFIG_ATH5K_DEBUG=y
  29 -CONFIG_ATH5K_RFKILL=y
  30 -CONFIG_ATH9K=m
  31 +# CONFIG_ATH5K_RFKILL=y
  32 +# CONFIG_ATH9K=m
  33  # CONFIG_ATH9K_DEBUG=y
  34
  35
  36 -CONFIG_IWLWIFI=m
  37 -CONFIG_IWLWIFI_LEDS=y
  38 -CONFIG_IWLWIFI_RFKILL=y
  39 -CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
  40 +# CONFIG_IWLWIFI=m
  41 +# CONFIG_IWLWIFI_LEDS=y
  42 +# CONFIG_IWLWIFI_RFKILL=y
  43 +# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
  44  # CONFIG_IWLWIFI_DEBUG=y
  45  # CONFIG_IWLWIFI_DEBUGFS=y
  46 -CONFIG_IWLAGN=m
  47 -CONFIG_COMPAT_IWL4965=y
  48 -CONFIG_IWL5000=y
  49 -CONFIG_IWL3945=m
  50 -CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
  51 +# CONFIG_IWLAGN=m
  52 +# CONFIG_COMPAT_IWL4965=y
  53 +# CONFIG_IWL5000=y
  54 +# CONFIG_IWL3945=m
  55 +# CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
  56
  57
  58 -CONFIG_B43=m
  59 -CONFIG_B43_HWRNG=y
  60 -CONFIG_B43_PCI_AUTOSELECT=y
  61 -CONFIG_B43_PCICORE_AUTOSELECT=y
  62 -CONFIG_B43_PCMCIA=y
  63 -CONFIG_B43_PIO=y
  64 -CONFIG_B43_LEDS=y
  65 -CONFIG_B43_RFKILL=y
  66 +# CONFIG_B43=m
  67 +# CONFIG_B43_HWRNG=y
  68 +# CONFIG_B43_PCI_AUTOSELECT=y
  69 +# CONFIG_B43_PCICORE_AUTOSELECT=y
  70 +# CONFIG_B43_PCMCIA=y
  71 +# CONFIG_B43_PIO=y
  72 +# CONFIG_B43_LEDS=y
  73 +# CONFIG_B43_RFKILL=y
  74  # CONFIG_B43_DEBUG=y
  75  # CONFIG_B43_FORCE_PIO=y
  76
  77 -CONFIG_B43LEGACY=m
  78 -CONFIG_B43LEGACY_HWRNG=y
  79 -CONFIG_B43LEGACY_PCI_AUTOSELECT=y
  80 -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
  81 -CONFIG_B43LEGACY_LEDS=y
  82 -CONFIG_B43LEGACY_RFKILL=y
  83 +# CONFIG_B43LEGACY=m
  84 +# CONFIG_B43LEGACY_HWRNG=y
  85 +# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
  86 +# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
  87 +# CONFIG_B43LEGACY_LEDS=y
  88 +# CONFIG_B43LEGACY_RFKILL=y
  89  # CONFIG_B43LEGACY_DEBUG=y
  90  CONFIG_B43LEGACY_DMA=y
  91 -CONFIG_B43LEGACY_PIO=y
  92 -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
  93 -# CONFIG_B43LEGACY_DMA_MODE=y
  94 +# CONFIG_B43LEGACY_PIO=y
  95 +# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
  96 +CONFIG_B43LEGACY_DMA_MODE=y
  97  # CONFIG_B43LEGACY_PIO_MODE=y
  98
  99  # The Intel ipws
 100 -CONFIG_LIBIPW=m
 101 +# CONFIG_LIBIPW=m
 102  # CONFIG_LIBIPW_DEBUG=y
 103
 104
 105 -CONFIG_IPW2100=m
 106 -CONFIG_IPW2100_MONITOR=y
 107 +# CONFIG_IPW2100=m
 108 +# CONFIG_IPW2100_MONITOR=y
 109  # CONFIG_IPW2100_DEBUG=y
 110 -CONFIG_IPW2200=m
 111 -CONFIG_IPW2200_MONITOR=y
 112 -CONFIG_IPW2200_RADIOTAP=y
 113 -CONFIG_IPW2200_PROMISCUOUS=y
 114 -CONFIG_IPW2200_QOS=y
 115 +# CONFIG_IPW2200=m
 116 +# CONFIG_IPW2200_MONITOR=y
 117 +# CONFIG_IPW2200_RADIOTAP=y
 118 +# CONFIG_IPW2200_PROMISCUOUS=y
 119 +# CONFIG_IPW2200_QOS=y
 120  # CONFIG_IPW2200_DEBUG=y
 121  # The above enables use a second interface prefixed 'rtap'.
 122  #           Example usage:
 123 @@ -238,46 +238,46 @@ CONFIG_IPW2200_QOS=y
 124  #
 125  # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
 126
 127 -CONFIG_SSB_BLOCKIO=y
 128 -CONFIG_SSB_PCIHOST_POSSIBLE=y
 129 -CONFIG_SSB_PCIHOST=y
 130 -CONFIG_SSB_B43_PCI_BRIDGE=y
 131 -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 132 -CONFIG_SSB_PCMCIAHOST=y
 133 +# CONFIG_SSB_BLOCKIO=y
 134 +# CONFIG_SSB_PCIHOST_POSSIBLE=y
 135 +# CONFIG_SSB_PCIHOST=y
 136 +# CONFIG_SSB_B43_PCI_BRIDGE=y
 137 +# CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 138 +# CONFIG_SSB_PCMCIAHOST=y
 139  # CONFIG_SSB_DEBUG=y
 140 -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 141 -CONFIG_SSB_DRIVER_PCICORE=y
 142 +# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 143 +# CONFIG_SSB_DRIVER_PCICORE=y
 144
 145 -CONFIG_P54_PCI=m
 146 +# CONFIG_P54_PCI=m
 147
 148 -CONFIG_B44=m
 149 -CONFIG_B44_PCI_AUTOSELECT=y
 150 -CONFIG_B44_PCICORE_AUTOSELECT=y
 151 -CONFIG_B44_PCI=y
 152 +# CONFIG_B44=m
 153 +# CONFIG_B44_PCI_AUTOSELECT=y
 154 +# CONFIG_B44_PCICORE_AUTOSELECT=y
 155 +# CONFIG_B44_PCI=y
 156
 157 -CONFIG_RTL8180=m
 158 +# CONFIG_RTL8180=m
 159
 160 -CONFIG_ADM8211=m
 161 -CONFIG_PCMCIA_ATMEL=m
 162 +# CONFIG_ADM8211=m
 163 +# CONFIG_PCMCIA_ATMEL=m
 164
 165 -CONFIG_RT2X00_LIB_PCI=m
 166 -CONFIG_RT2400PCI=m
 167 -CONFIG_RT2500PCI=m
 168 -CONFIG_RT2800PCI=m
 169 +# CONFIG_RT2X00_LIB_PCI=m
 170 +# CONFIG_RT2400PCI=m
 171 +# CONFIG_RT2500PCI=m
 172 +# CONFIG_RT2800PCI=m
 173  NEED_RT2X00=y
 174
 175  # Two rt2x00 drivers require firmware: rt61pci and rt73usb. They depend on
 176  # CRC to check the firmware. We check here first for the PCI
 177  # driver as we're in the PCI section.
 178  ifneq ($(CONFIG_CRC_ITU_T),)
 179 -CONFIG_RT61PCI=m
 180 +# CONFIG_RT61PCI=m
 181  NEED_RT2X00_FIRMWARE=y
 182  endif
 183
 184 -CONFIG_ATMEL=m
 185 -CONFIG_PCI_ATMEL=m
 186 +# CONFIG_ATMEL=m
 187 +# CONFIG_PCI_ATMEL=m
 188
 189 -CONFIG_MWL8K=m
 190 +# CONFIG_MWL8K=m
 191
 192  endif
 193  ## end of PCI
 194 @@ -285,22 +285,22 @@ endif
 195  ifneq ($(CONFIG_PCMCIA),)
 196
 197  ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
 198 -CONFIG_LIBERTAS=n
 199 -CONFIG_LIBERTAS_CS=n
 200 +# CONFIG_LIBERTAS=n
 201 +# CONFIG_LIBERTAS_CS=n
 202  else
 203 -CONFIG_LIBERTAS_CS=m
 204 -NEED_LIBERTAS=y
 205 +# CONFIG_LIBERTAS_CS=m
 206 +# NEED_LIBERTAS=y
 207  endif
 208
 209  endif
 210  ## end of PCMCIA
 211
 212  # This is required for some cards
 213 -CONFIG_EEPROM_93CX6=m
 214 +# CONFIG_EEPROM_93CX6=m
 215
 216  # USB Drivers
 217  ifneq ($(CONFIG_USB),)
 218 -CONFIG_ZD1211RW=m
 219 +# CONFIG_ZD1211RW=m
 220  # CONFIG_ZD1211RW_DEBUG=y
 221
 222  # Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
 223 @@ -310,55 +310,55 @@ CONFIG_ZD1211RW=m
 224  # is only wireless RNDIS chip known to date.
 225  # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
 226  # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
 227 -CONFIG_USB_NET_RNDIS_HOST=m
 228 -CONFIG_USB_NET_RNDIS_WLAN=m
 229 -CONFIG_USB_NET_CDCETHER=m
 230 +# CONFIG_USB_NET_RNDIS_HOST=m
 231 +# CONFIG_USB_NET_RNDIS_WLAN=m
 232 +# CONFIG_USB_NET_CDCETHER=m
 233
 234
 235 -CONFIG_P54_USB=m
 236 -CONFIG_RTL8187=m
 237 +# CONFIG_P54_USB=m
 238 +# CONFIG_RTL8187=m
 239
 240 -CONFIG_AT76C50X_USB=m
 241 +# CONFIG_AT76C50X_USB=m
 242
 243  ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 28 && echo yes),yes)
 244 -CONFIG_AR9170_USB=m
 245 -CONFIG_AR9170_LEDS=y
 246 +# CONFIG_AR9170_USB=m
 247 +# CONFIG_AR9170_LEDS=y
 248  endif
 249
 250  # RT2500USB does not require firmware
 251 -CONFIG_RT2500USB=m
 252 -CONFIG_RT2800USB=m
 253 -CONFIG_RT2X00_LIB_USB=m
 254 +# CONFIG_RT2500USB=m
 255 +# CONFIG_RT2800USB=m
 256 +# CONFIG_RT2X00_LIB_USB=m
 257  NEED_RT2X00=y
 258  # RT73USB requires firmware
 259  ifneq ($(CONFIG_CRC_ITU_T),)
 260 -CONFIG_RT73USB=m
 261 +# CONFIG_RT73USB=m
 262  NEED_RT2X00_FIRMWARE=y
 263  endif
 264
 265  ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
 266 -CONFIG_LIBERTAS_THINFIRM_USB=n
 267 -CONFIG_LIBERTAS_USB=n
 268 -NEED_LIBERTAS=n
 269 +# CONFIG_LIBERTAS_THINFIRM_USB=n
 270 +# CONFIG_LIBERTAS_USB=n
 271 +# NEED_LIBERTAS=n
 272  else
 273 -CONFIG_LIBERTAS_THINFIRM_USB=m
 274 -CONFIG_LIBERTAS_USB=m
 275 -NEED_LIBERTAS=y
 276 +# CONFIG_LIBERTAS_THINFIRM_USB=m
 277 +# CONFIG_LIBERTAS_USB=m
 278 +# NEED_LIBERTAS=y
 279  endif
 280
 281  endif # end of USB driver list
 282
 283  ifneq ($(CONFIG_SPI_MASTER),)
 284
 285 -CONFIG_WL1251=m
 286 -CONFIG_P54_SPI=m
 287 +# CONFIG_WL1251=m
 288 +# CONFIG_P54_SPI=m
 289
 290  ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
 291 -CONFIG_LIBERTAS_SPI=n
 292 -NEED_LIBERTAS=n
 293 +# CONFIG_LIBERTAS_SPI=n
 294 +# NEED_LIBERTAS=n
 295  else
 296 -CONFIG_LIBERTAS_SPI=m
 297 -NEED_LIBERTAS=y
 298 +# CONFIG_LIBERTAS_SPI=m
 299 +# NEED_LIBERTAS=y
 300  endif
 301
 302  endif # end of SPI driver list
 303 @@ -366,17 +366,17 @@ endif # end of SPI driver list
 304  ifneq ($(CONFIG_MMC),)
 305
 306  ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
 307 -CONFIG_LIBERTAS_SDIO=n
 308 -NEED_LIBERTAS=n
 309 +# CONFIG_LIBERTAS_SDIO=n
 310 +# NEED_LIBERTAS=n
 311  else
 312 -CONFIG_LIBERTAS_SDIO=m
 313 -NEED_LIBERTAS=y
 314 +# CONFIG_LIBERTAS_SDIO=m
 315 +# NEED_LIBERTAS=y
 316  endif
 317
 318  # Activate iwmc3200wifi support only on kernel >= 2.6.29.
 319  # iwmc3200wifi uses new netdev_ops api no supported by old kernel.
 320  ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 29 && echo yes),yes)
 321 -CONFIG_IWM=m
 322 +# CONFIG_IWM=m
 323  # CONFIG_IWM_DEBUG=y
 324  endif
 325
 326 @@ -384,12 +384,12 @@ endif # end of SDIO driver list
 327
 328  # Common rt2x00 requirements
 329  ifeq ($(NEED_RT2X00),y)
 330 -CONFIG_RT2X00=m
 331 +# CONFIG_RT2X00=m
 332  CONFIG_RT2X00_LIB=m
 333  CONFIG_RT2X00_LIB_HT=y
 334  CONFIG_RT2X00_LIB_FIRMWARE=y
 335  CONFIG_RT2X00_LIB_CRYPTO=y
 336 -CONFIG_RT2X00_LIB_RFKILL=y
 337 +# CONFIG_RT2X00_LIB_RFKILL=y
 338  CONFIG_RT2X00_LIB_LEDS=y
 339  # CONFIG_RT2X00_LIB_DEBUGFS=y
 340  # CONFIG_RT2X00_DEBUG=y
 341 @@ -400,30 +400,30 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
 342  endif
 343
 344  # p54
 345 -CONFIG_P54_COMMON=m
 346 +# CONFIG_P54_COMMON=m
 347  CONFIG_P54_LEDS=y
 348
 349  # Atheros
 350 -CONFIG_ATH_COMMON=m
 351 +# CONFIG_ATH_COMMON=m
 352
 353 -CONFIG_WL12XX=y
 354 -CONFIG_WL1251=m
 355 -CONFIG_WL1251_SPI=m
 356 -CONFIG_WL1251_SDIO=m
 357 -CONFIG_WL1271=m
 358 +# CONFIG_WL12XX=y
 359 +# CONFIG_WL1251=m
 360 +# CONFIG_WL1251_SPI=m
 361 +# CONFIG_WL1251_SDIO=m
 362 +# CONFIG_WL1271=m
 363
 364  # Sonics Silicon Backplane
 365 -CONFIG_SSB_POSSIBLE=y
 366 -CONFIG_SSB=m
 367 -CONFIG_SSB_SPROM=y
 368 +# CONFIG_SSB_POSSIBLE=y
 369 +# CONFIG_SSB=m
 370 +# CONFIG_SSB_SPROM=y
 371  # CONFIG_SSB_DEBUG=y
 372
 373  ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
 374 -CONFIG_LIBERTAS=n
 375 +# CONFIG_LIBERTAS=n
 376  else
 377  ifeq ($(NEED_LIBERTAS),y)
 378 -CONFIG_LIBERTAS_THINFIRM=m
 379 -CONFIG_LIBERTAS=m
 380 +# CONFIG_LIBERTAS_THINFIRM=m
 381 +# CONFIG_LIBERTAS=m
 382  # CONFIG_LIBERTAS_DEBUG=y
 383  endif
 384  endif
 385 @@ -431,8 +431,8 @@ endif
 386  # We need the backported rfkill module on kernel < 2.6.31.
 387  # In more recent kernel versions use the in kernel rfkill module.
 388  ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 30 && echo yes),yes)
 389 -CONFIG_RFKILL_BACKPORT=m
 390 -CONFIG_RFKILL_BACKPORT_LEDS=y
 391 -CONFIG_RFKILL_BACKPORT_INPUT=y
 392 +# CONFIG_RFKILL_BACKPORT=m
 393 +# CONFIG_RFKILL_BACKPORT_LEDS=y
 394 +# CONFIG_RFKILL_BACKPORT_INPUT=y
 395  endif
 396