obsolete-buildroot/Makefile

   1 # Makefile for a simple busybox/uClibc root filesystem
   2 #
   3 # Copyright (C) 2001-2004 Erik Andersen <andersen@codepoet.org>
   4 # Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
   5 #
   6 # This program is free software; you can redistribute it and/or modify
   7 # it under the terms of the GNU Library General Public License as
   8 # published by the Free Software Foundation; either version 2 of the
   9 # License, or (at your option) any later version.
  10 #
  11 # This program is distributed in the hope that it will be useful, but
  12 # WITHOUT ANY WARRANTY; without even the implied warranty of
  13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  14 # Library General Public License for more details.
  15 #
  16 # You should have received a copy of the GNU Library General Public
  17 # License along with this program; if not, write to the Free Software
  18 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  19 # USA
  20
  21
  22 #############################################################
  23 #
  24 # EDIT this stuff to suit your system and preferences
  25 #
  26 # Use := when possible to get precomputation, thereby
  27 # speeding up the build process.
  28 #
  29 #############################################################
  30
  31 SNAPSHOT:=20050101
  32
  33 ARCH:=mipsel
  34 USE_UCLIBC_SNAPSHOT:=$(SNAPSHOT)
  35 USE_UCLIBC_LDSO_0_9_24:=false
  36 #USE_BUSYBOX_SNAPSHOT:=$(SNAPSHOT)
  37 USE_NETFILTER_SNAPSHOT:=20041009
  38 USE_BRIDGE_VERSION:=1.0.4
  39 BUILD_WITH_LARGEFILE:=true
  40
  41 OPTIMIZE_FOR_CPU=$(ARCH)
  42
  43 # Command used to download source code
  44 WGET:=wget --passive-ftp
  45
  46 # Soft floating point options.
  47 # Notes:
  48 #   Currently builds with gcc 3.3 for arm, mips, mipsel, powerpc.
  49 #   (i386 support will be added back in at some point.)
  50 #   Only tested with multilib enabled.
  51 #   For i386, long double is the same as double (64 bits).  While this
  52 #      is unusual for x86, it seemed the best approach considering the
  53 #      limitations in the gcc floating point emulation library.
  54 #   For arm, soft float uses the usual libfloat routines.
  55 #   Custom specs files are used to set the default gcc mode to soft float
  56 #      as a convenience, since you shouldn't link hard and soft float
  57 #      together.  In fact, arm won't even let you.
  58 # (Un)comment the appropriate line below.
  59 #SOFT_FLOAT:=true
  60 SOFT_FLOAT:=false
  61
  62 TARGET_OPTIMIZATION=-Os -mips2
  63 TARGET_DEBUGGING= #-g
  64
  65 # Currently the unwind stuff seems to work for staticly linked apps but
  66 # not dynamic.  So use setjmp/longjmp exceptions by default.
  67 # GCC_USE_SJLJ_EXCEPTIONS:=--enable-sjlj-exceptions
  68 GCC_USE_SJLJ_EXCEPTIONS:=
  69
  70 # Any additional gcc options you may want to include....
  71 EXTRA_GCC_CONFIG_OPTIONS:=
  72
  73 # Enable the following if you want locale/gettext/i18n support.
  74 # NOTE!  Currently the pregnerated locale stuff only works for x86!
  75 #ENABLE_LOCALE:=true
  76 ENABLE_LOCALE:=false
  77
  78 # If you want multilib enabled, enable this...
  79 MULTILIB:=--enable-multilib
  80
  81 # Build/install c++ compiler and libstdc++?
  82 #INSTALL_LIBSTDCPP:=true
  83 INSTALL_LIBSTDCPP:=false
  84
  85 # Build/install java compiler and libgcj? (requires c++)
  86 # WARNING!!! DOES NOT BUILD FOR TARGET WITHOUT INTERVENTION!!!  mjn3
  87 #INSTALL_LIBGCJ:=true
  88 INSTALL_LIBGCJ:=false
  89
  90 # For SMP machines some stuff can be run in parallel
  91 #JLEVEL=-j3
  92
  93 #############################################################
  94 #
  95 # The list of stuff to build for the target filesystem
  96 #
  97 #############################################################
  98 TARGETS:=host-sed openwrt-code.bin
  99
 100 PACKAGES:=oidentd iproute2 kmod-sched wshaper zlib openssl openssh pppoecd dropbear chillispot dhcp-fwd ip6tables kmod-ipt6 kmod-ipv6 kmod-nfs kmod-ppp-async kmod-ppp-mppe-mppc ppp pppoecd pptp-server kmod-tun fprobe libpcap libpthread pptp-client vsftpd matrixssl ntpclient radvd strace
 101
 102 #############################################################
 103 #
 104 # You should probably leave this stuff alone unless you know
 105 # what you are doing.
 106 #
 107 #############################################################
 108
 109 ifeq ($(SOFT_FLOAT),true)
 110 SOFT_FLOAT_CONFIG_OPTION:=--without-float
 111 TARGET_SOFT_FLOAT:=-msoft-float
 112 ARCH_FPU_SUFFIX:=_nofpu
 113 else
 114 SOFT_FLOAT_CONFIG_OPTION:=
 115 TARGET_SOFT_FLOAT:=
 116 ARCH_FPU_SUFFIX:=
 117 endif
 118
 119 ifeq ($(INSTALL_LIBGCJ),true)
 120 INSTALL_LIBSTDCPP:=true
 121 endif
 122
 123 # WARNING -- uClibc currently disables large file support on cris.
 124 ifeq ("$(strip $(ARCH))","cris")
 125 BUILD_WITH_LARGEFILE:=false
 126 endif
 127
 128 ifneq ($(BUILD_WITH_LARGEFILE),true)
 129 DISABLE_LARGEFILE= --disable-largefile
 130 endif
 131 TARGET_CFLAGS=$(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING)
 132
 133 HOSTCC:=gcc
 134 BASE_DIR:=${shell pwd}
 135 SOURCE_DIR:=$(BASE_DIR)/sources
 136 DL_DIR:=$(SOURCE_DIR)/dl
 137 PATCH_DIR=$(SOURCE_DIR)/patches
 138 BUILD_DIR:=$(BASE_DIR)/build_$(ARCH)$(ARCH_FPU_SUFFIX)
 139 TARGET_DIR:=$(BUILD_DIR)/root
 140 STAGING_DIR=$(BUILD_DIR)/staging_dir
 141 TOOL_BUILD_DIR=$(BASE_DIR)/toolchain_build_$(ARCH)$(ARCH_FPU_SUFFIX)
 142 TARGET_PATH=$(STAGING_DIR)/bin:/bin:/sbin:/usr/bin:/usr/sbin
 143 IMAGE:=$(BASE_DIR)/root_fs_$(ARCH)$(ARCH_FPU_SUFFIX)
 144 REAL_GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-linux-uclibc
 145 GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-linux
 146 KERNEL_CROSS=$(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-
 147 TARGET_CROSS=$(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-
 148 TARGET_CC=$(TARGET_CROSS)gcc
 149 #STRIP=$(TARGET_CROSS)strip --remove-section=.comment --remove-section=.note --strip-unneeded
 150 STRIP=$(STAGING_DIR)/bin/sstrip
 151
 152 HOST_ARCH:=$(shell $(HOSTCC) -dumpmachine | sed -e s'/-.*//' \
 153         -e 's/sparc.*/sparc/' \
 154         -e 's/arm.*/arm/g' \
 155         -e 's/m68k.*/m68k/' \
 156         -e 's/ppc/powerpc/g' \
 157         -e 's/v850.*/v850/g' \
 158         -e 's/sh[234]/sh/' \
 159         -e 's/mips-.*/mips/' \
 160         -e 's/mipsel-.*/mipsel/' \
 161         -e 's/cris.*/cris/' \
 162         -e 's/i[3-9]86/i386/' \
 163         )
 164 GNU_HOST_NAME:=$(HOST_ARCH)-pc-linux-gnu
 165 TARGET_CONFIGURE_OPTS=PATH=$(TARGET_PATH) \
 166                 AR=$(TARGET_CROSS)ar \
 167                 AS=$(TARGET_CROSS)as \
 168                 LD=$(TARGET_CROSS)ld \
 169                 NM=$(TARGET_CROSS)nm \
 170                 CC=$(TARGET_CROSS)gcc \
 171                 GCC=$(TARGET_CROSS)gcc \
 172                 CXX=$(TARGET_CROSS)g++ \
 173                 RANLIB=$(TARGET_CROSS)ranlib
 174
 175 ifeq ($(ENABLE_LOCALE),true)
 176 DISABLE_NLS:=
 177 else
 178 DISABLE_NLS:=--disable-nls
 179 endif
 180
 181 all:   world
 182
 183 TARGETS_CLEAN:=$(patsubst %,%-clean,$(TARGETS))
 184 TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS))
 185 TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
 186
 187
 188 PACKAGES_IPK:=$(patsubst %,%-ipk,$(PACKAGES))
 189 OPENWRT_IPK_DIR=$(SOURCE_DIR)/openwrt/ipkg
 190
 191 world: $(DL_DIR) $(TARGETS_SOURCE) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) $(TARGETS)
 192         @echo "ALL DONE."
 193
 194 packages: ipkg-utils $(PACKAGES_IPK)
 195         -@mkdir -p $(BASE_DIR)/packages
 196         { \
 197                 cd $(BASE_DIR)/packages; \
 198                 mv $(BUILD_DIR)/*.ipk .; \
 199                 $(IPKG_MAKE_INDEX) . > Packages; \
 200         }
 201         @echo "ALL DONE."
 202
 203 .PHONY: all world clean dirclean distclean source $(TARGETS) \
 204         $(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE)
 205
 206 include make/*.mk
 207
 208 #############################################################
 209 #
 210 # staging and target directories do NOT list these as
 211 # dependancies anywhere else
 212 #
 213 #############################################################
 214 $(DL_DIR):
 215         mkdir $(DL_DIR)
 216
 217 $(BUILD_DIR):
 218         mkdir $(BUILD_DIR)
 219
 220 $(STAGING_DIR):
 221         rm -rf $(STAGING_DIR)
 222         mkdir -p $(STAGING_DIR)/lib
 223         mkdir -p $(STAGING_DIR)/usr
 224         ln -fs $(REAL_GNU_TARGET_NAME)/include $(STAGING_DIR)/include
 225         ln -fs ../lib $(STAGING_DIR)/usr/lib
 226         ln -fs ../$(REAL_GNU_TARGET_NAME)/include $(STAGING_DIR)/usr/include
 227
 228
 229 $(TARGET_DIR):
 230         rm -rf $(TARGET_DIR)
 231         cp -a $(SOURCE_DIR)/openwrt/root/ $(TARGET_DIR)
 232         -find $(TARGET_DIR) -type d -name CVS -exec rm -rf {} \; > /dev/null 2>&1
 233
 234 source: $(TARGETS_SOURCE)
 235
 236 #############################################################
 237 #
 238 # Cleanup and misc junk
 239 #
 240 #############################################################
 241 clean:
 242         rm -rf $(TOOL_BUILD_DIR) $(BUILD_DIR) $(IMAGE) \
 243                 $(BASE_DIR)/packages \
 244                 openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \
 245                 openwrt-kmodules.tar.bz2
 246
 247 dirclean: $(TARGETS_DIRCLEAN)
 248         rm -rf $(TARGET_DIR) $(STAGING_DIR) $(IMAGE) \
 249                 $(BASE_DIR)/packages \
 250                 openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \
 251                 openwrt-kmodules.tar.bz2
 252
 253 distclean:
 254         rm -rf $(DL_DIR) $(BUILD_DIR) $(LINUX_KERNEL) $(IMAGE) \
 255                 openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \
 256                 openwrt-kmodules.tar.bz2
 257
 258 sourceball:
 259         rm -rf $(BUILD_DIR)
 260         set -e; \
 261         cd ..; \
 262         rm -f buildroot.tar.bz2; \
 263         tar -cvf buildroot.tar buildroot; \
 264         bzip2 -9 buildroot.tar; \