base-files/sysupgrade: add more busybox applet symlinks to ramdisk
[openwrt.git] / package / ltq-dsl / src / ifxmips_atm_ppe_amazon_se.h
1 #ifndef IFXMIPS_ATM_PPE_AMAZON_SE_H
2 #define IFXMIPS_ATM_PPE_AMAZON_SE_H
3
4
5
6 /*
7 * FPI Configuration Bus Register and Memory Address Mapping
8 */
9 #define IFX_PPE (KSEG1 | 0x1E180000)
10 #define PP32_DEBUG_REG_ADDR(i, x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x0000) << 2)))
11 #define PPM_INT_REG_ADDR(i, x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x0030) << 2)))
12 #define PP32_INTERNAL_RES_ADDR(i, x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x0040) << 2)))
13 #define CDM_CODE_MEMORY(i, x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x1000) << 2)))
14 #define PPE_REG_ADDR(x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x4000) << 2)))
15 #define CDM_DATA_MEMORY(i, x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x5000) << 2)))
16 #define PPM_INT_UNIT_ADDR(x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x6000) << 2)))
17 #define PPM_TIMER0_ADDR(x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x6100) << 2)))
18 #define PPM_TASK_IND_REG_ADDR(x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x6200) << 2)))
19 #define PPS_BRK_ADDR(x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x6300) << 2)))
20 #define PPM_TIMER1_ADDR(x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x6400) << 2)))
21 #define SB_RAM0_ADDR(x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x8200) << 2)))
22 #define SB_RAM1_ADDR(x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0x8C00) << 2)))
23 #define QSB_CONF_REG_ADDR(x) ((volatile unsigned int*)(IFX_PPE + (((x) + 0xC000) << 2)))
24
25 /*
26 * DWORD-Length of Memory Blocks
27 */
28 #define PP32_DEBUG_REG_DWLEN 0x0030
29 #define PPM_INT_REG_DWLEN 0x0010
30 #define PP32_INTERNAL_RES_DWLEN 0x00C0
31 #define CDM_CODE_MEMORYn_DWLEN(n) ((n) == 0 ? 0x1000 : 0x0800)
32 #define PPE_REG_DWLEN 0x1000
33 #define CDM_DATA_MEMORY_DWLEN CDM_CODE_MEMORYn_DWLEN(1)
34 #define PPM_INT_UNIT_DWLEN 0x0100
35 #define PPM_TIMER0_DWLEN 0x0100
36 #define PPM_TASK_IND_REG_DWLEN 0x0100
37 #define PPS_BRK_DWLEN 0x0100
38 #define PPM_TIMER1_DWLEN 0x0100
39 #define SB_RAM0_DWLEN 0x0A00
40 #define SB_RAM1_DWLEN 0x0A00
41 #define QSB_CONF_REG_DWLEN 0x0100
42
43 /*
44 * PP32 to FPI Address Mapping
45 */
46 #define SB_BUFFER(__sb_addr) ((volatile unsigned int *)((((__sb_addr) >= 0x2200) && ((__sb_addr) <= 0x2BFF)) ? SB_RAM0_ADDR((__sb_addr) - 0x2200) : \
47 (((__sb_addr) >= 0x2C00) && ((__sb_addr) <= 0x35FF)) ? SB_RAM1_ADDR((__sb_addr) - 0x2C00) : \
48 0))
49
50 /*
51 * PP32 Debug Control Register
52 */
53 #define PP32_DBG_CTRL PP32_DEBUG_REG_ADDR(0, 0x0000)
54
55 #define DBG_CTRL_RESTART 0
56 #define DBG_CTRL_STOP 1
57
58 #define PP32_HALT_STAT PP32_DEBUG_REG_ADDR(0, 0x0D00)
59 #define PP32_BREAKPOINT_REASONS PP32_DEBUG_REG_ADDR(0, 0x0A00)
60
61 #define PP32_BRK_SRC PP32_DEBUG_REG_ADDR(0, 0x0F00)
62
63 #define PP32_DBG_CUR_PC PP32_DEBUG_REG_ADDR(0, 0x0F80)
64
65 #define PP32_DBG_TASK_NO PP32_DEBUG_REG_ADDR(0, 0x0F81)
66
67 /*
68 * Share Buffer
69 */
70 #define SB_MST_PRI0 PPE_REG_ADDR(0x0300)
71 #define SB_MST_PRI1 PPE_REG_ADDR(0x0301)
72
73 /*
74 * EMA Registers
75 */
76 #define EMA_CMDCFG PPE_REG_ADDR(0x0A00)
77 #define EMA_DATACFG PPE_REG_ADDR(0x0A01)
78 #define EMA_CMDCNT PPE_REG_ADDR(0x0A02)
79 #define EMA_DATACNT PPE_REG_ADDR(0x0A03)
80 #define EMA_ISR PPE_REG_ADDR(0x0A04)
81 #define EMA_IER PPE_REG_ADDR(0x0A05)
82 #define EMA_CFG PPE_REG_ADDR(0x0A06)
83 #define EMA_SUBID PPE_REG_ADDR(0x0A07)
84
85 #define EMA_ALIGNMENT 4
86
87 /*
88 * Mailbox IGU1 Interrupt
89 */
90 #define PPE_MAILBOX_IGU1_INT (INT_NUM_IM2_IRL0 + 13)
91
92
93
94 #endif // IFXMIPS_ATM_PPE_AMAZON_SE_H
This page took 0.049577 seconds and 5 git commands to generate.