ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4
[openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-tl-wr2543n.c
1 /*
2 * TP-LINK TL-WR2543N/ND board support
3 *
4 * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/platform_device.h>
12 #include <linux/rtl8367.h>
13
14 #include <asm/mach-ath79/ath79.h>
15
16 #include "dev-eth.h"
17 #include "dev-ap9x-pci.h"
18 #include "dev-gpio-buttons.h"
19 #include "dev-leds-gpio.h"
20 #include "dev-m25p80.h"
21 #include "dev-usb.h"
22 #include "machtypes.h"
23
24 #define TL_WR2543N_GPIO_LED_WPS 0
25 #define TL_WR2543N_GPIO_LED_USB 8
26
27 #define TL_WR2543N_GPIO_BTN_RESET 11
28 #define TL_WR2543N_GPIO_BTN_WPS 12
29
30 #define TL_WR2543N_GPIO_RTL8367_SDA 1
31 #define TL_WR2543N_GPIO_RTL8367_SCK 6
32
33 #define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */
34 #define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL)
35
36 static const char *tl_wr2543n_part_probes[] = {
37 "tp-link",
38 NULL,
39 };
40
41 static struct flash_platform_data tl_wr2543n_flash_data = {
42 .part_probes = tl_wr2543n_part_probes,
43 .max_read_len = 64,
44 };
45
46 static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = {
47 {
48 .name = "tp-link:green:usb",
49 .gpio = TL_WR2543N_GPIO_LED_USB,
50 .active_low = 1,
51 }, {
52 .name = "tp-link:green:wps",
53 .gpio = TL_WR2543N_GPIO_LED_WPS,
54 .active_low = 1,
55 }
56 };
57
58 static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = {
59 {
60 .desc = "reset",
61 .type = EV_KEY,
62 .code = KEY_RESTART,
63 .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
64 .gpio = TL_WR2543N_GPIO_BTN_RESET,
65 .active_low = 1,
66 }, {
67 .desc = "wps",
68 .type = EV_KEY,
69 .code = KEY_WPS_BUTTON,
70 .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
71 .gpio = TL_WR2543N_GPIO_BTN_WPS,
72 .active_low = 1,
73 }
74 };
75
76 static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = {
77 .mode = RTL8367_EXTIF_MODE_RGMII,
78 .txdelay = 1,
79 .rxdelay = 0,
80 .ability = {
81 .force_mode = 1,
82 .txpause = 1,
83 .rxpause = 1,
84 .link = 1,
85 .duplex = 1,
86 .speed = RTL8367_PORT_SPEED_1000,
87 },
88 };
89
90 static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = {
91 .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA,
92 .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK,
93 .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg,
94 };
95
96 static struct platform_device tl_wr2543n_rtl8367_device = {
97 .name = RTL8367_DRIVER_NAME,
98 .id = -1,
99 .dev = {
100 .platform_data = &tl_wr2543n_rtl8367_data,
101 }
102 };
103
104 static void __init tl_wr2543n_setup(void)
105 {
106 u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
107 u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
108
109 ath79_register_m25p80(&tl_wr2543n_flash_data);
110 ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio),
111 tl_wr2543n_leds_gpio);
112 ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL,
113 ARRAY_SIZE(tl_wr2543n_gpio_keys),
114 tl_wr2543n_gpio_keys);
115 ath79_register_usb();
116 ap91_pci_init(eeprom, mac);
117
118 ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
119 ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev;
120 ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
121 ath79_eth0_data.speed = SPEED_1000;
122 ath79_eth0_data.duplex = DUPLEX_FULL;
123 ath79_eth0_pll_data.pll_1000 = 0x1a000000;
124
125 ath79_register_eth(0);
126
127 platform_device_register(&tl_wr2543n_rtl8367_device);
128 }
129
130 MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND",
131 tl_wr2543n_setup);
This page took 0.054741 seconds and 5 git commands to generate.