3 * Copyright (C) 2007-2008 OpenWrt.org
4 * Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
6 * This code was based on the information of the ZyXEL's firmware
7 * image format written by Kolja Waschk, can be found at:
8 * http://www.ixo.de/info/zyxel_uclinux
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License version 2 as published
12 * by the Free Software Foundation.
20 #include <unistd.h> /* for unlink() */
22 #include <getopt.h> /* for getopt() */
26 #include <endian.h> /* for __BYTE_ORDER */
27 #if defined(__CYGWIN__)
28 # include <byteswap.h>
33 #if (__BYTE_ORDER == __LITTLE_ENDIAN)
34 # define HOST_TO_LE16(x) (x)
35 # define HOST_TO_LE32(x) (x)
36 # define LE16_TO_HOST(x) (x)
37 # define LE32_TO_HOST(x) (x)
38 # define HOST_TO_BE16(x) bswap_16(x)
39 # define HOST_TO_BE32(x) bswap_32(x)
40 # define BE16_TO_HOST(x) bswap_16(x)
41 # define BE32_TO_HOST(x) bswap_32(x)
43 # define HOST_TO_BE16(x) (x)
44 # define HOST_TO_BE32(x) (x)
45 # define BE16_TO_HOST(x) (x)
46 # define BE32_TO_HOST(x) (x)
47 # define HOST_TO_LE16(x) bswap_16(x)
48 # define HOST_TO_LE32(x) bswap_32(x)
49 # define LE16_TO_HOST(x) bswap_16(x)
50 # define LE32_TO_HOST(x) bswap_32(x)
53 #define ALIGN(x,y) (((x)+((y)-1)) & ~((y)-1))
55 #define MAX_NUM_BLOCKS 8
56 #define MAX_ARG_COUNT 32
57 #define MAX_ARG_LEN 1024
58 #define FILE_BUF_LEN (16*1024)
68 uint32_t align
; /* alignment of this block */
69 char *file_name
; /* name of the file */
70 uint32_t file_size
; /* length of the file */
71 char *mmap_name
; /* name in the MMAP table */
72 int type
; /* block type */
77 #define BLOCK_TYPE_BOOTEXT 0
78 #define BLOCK_TYPE_RAW 1
86 #define MMAP_DATA_SIZE 1024
90 char *name
; /* model name */
91 char *desc
; /* description */
92 uint16_t vendor
; /* vendor id */
93 uint16_t model
; /* model id */
94 uint32_t flash_base
; /* flash base address */
95 uint32_t flash_size
; /* board flash size */
96 uint32_t code_start
; /* code start address */
97 uint32_t romio_offs
; /* offset of the firmware within the flash */
98 uint32_t bootext_size
; /* maximum size of bootext block */
108 struct board_info
*board
= NULL
;
110 struct fw_block blocks
[MAX_NUM_BLOCKS
];
111 struct fw_block
*bootext_block
= NULL
;
114 #define ADM5120_FLASH_BASE 0xBFC00000
115 #define ADM5120_CODE_START 0x80008000
117 /* TODO: check values for AR7 */
118 #define AR7_FLASH_BASE 0xB0000000
119 #define AR7_CODE_START 0x94008000
121 #define ATHEROS_FLASH_BASE 0xBFC00000
122 #define ATHEROS_CODE_START 0x80e00000
124 #define AR71XX_FLASH_BASE 0xBFC00000
125 #define AR71XX_CODE_START 0x81E00000
127 #define BOARD(n, d, v, m, fb, fs, cs, fo) { \
128 .name = (n), .desc=(d), \
129 .vendor = (v), .model = (m), \
130 .flash_base = (fb), .flash_size = (fs)<<20, \
131 .code_start = (cs), .romio_offs = (fo), \
132 .bootext_size = BOOTEXT_DEF_SIZE \
135 #define ADMBOARD1(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
136 ADM5120_FLASH_BASE, fs, ADM5120_CODE_START, 0x8000)
138 #define ADMBOARD2(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
139 ADM5120_FLASH_BASE, fs, ADM5120_CODE_START, 0x10000)
141 #define AR7BOARD1(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
142 AR7_FLASH_BASE, fs, AR7_CODE_START, 0x8000)
144 #define ATHEROSBOARD1(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
145 ATHEROS_FLASH_BASE, fs, ATHEROS_CODE_START, 0x30000)
147 #define AR71XXBOARD1(n, d, m, fs) { \
148 .name = (n), .desc=(d), \
149 .vendor = (ZYNOS_VENDOR_ID_ZYXEL), .model = (m), \
150 .flash_base = (AR71XX_FLASH_BASE), .flash_size = (fs)<<20, \
151 .code_start = (AR71XX_CODE_START), .romio_offs = (0x40000), \
152 .bootext_size = 0x30000 \
156 static struct board_info boards
[] = {
158 * Infineon/ADMtek ADM5120 based boards
160 ADMBOARD2("ES-2024A", "ZyXEL ES-2024A", ZYNOS_MODEL_ES_2024A
, 4),
161 ADMBOARD2("ES-2024PWR", "ZyXEL ES-2024PWR", ZYNOS_MODEL_ES_2024PWR
, 4),
162 ADMBOARD2("ES-2108", "ZyXEL ES-2108", ZYNOS_MODEL_ES_2108
, 4),
163 ADMBOARD2("ES-2108-F", "ZyXEL ES-2108-F", ZYNOS_MODEL_ES_2108_F
, 4),
164 ADMBOARD2("ES-2108-G", "ZyXEL ES-2108-G", ZYNOS_MODEL_ES_2108_G
, 4),
165 ADMBOARD2("ES-2108-LC", "ZyXEL ES-2108-LC", ZYNOS_MODEL_ES_2108_LC
, 4),
166 ADMBOARD2("ES-2108PWR", "ZyXEL ES-2108PWR", ZYNOS_MODEL_ES_2108PWR
, 4),
167 ADMBOARD1("HS-100", "ZyXEL HomeSafe 100", ZYNOS_MODEL_HS_100
, 2),
168 ADMBOARD1("HS-100W", "ZyXEL HomeSafe 100W", ZYNOS_MODEL_HS_100W
, 2),
169 ADMBOARD1("P-334", "ZyXEL Prestige 334", ZYNOS_MODEL_P_334
, 2),
170 ADMBOARD1("P-334U", "ZyXEL Prestige 334U", ZYNOS_MODEL_P_334U
, 4),
171 ADMBOARD1("P-334W", "ZyXEL Prestige 334W", ZYNOS_MODEL_P_334W
, 2),
172 ADMBOARD1("P-334WH", "ZyXEL Prestige 334WH", ZYNOS_MODEL_P_334WH
, 4),
173 ADMBOARD1("P-334WHD", "ZyXEL Prestige 334WHD", ZYNOS_MODEL_P_334WHD
, 4),
174 ADMBOARD1("P-334WT", "ZyXEL Prestige 334WT", ZYNOS_MODEL_P_334WT
, 4),
175 ADMBOARD1("P-335", "ZyXEL Prestige 335", ZYNOS_MODEL_P_335
, 4),
176 ADMBOARD1("P-335Plus", "ZyXEL Prestige 335Plus", ZYNOS_MODEL_P_335PLUS
, 4),
177 ADMBOARD1("P-335U", "ZyXEL Prestige 335U", ZYNOS_MODEL_P_335U
, 4),
178 ADMBOARD1("P-335WT", "ZyXEL Prestige 335WT", ZYNOS_MODEL_P_335WT
, 4),
181 .name
= "P-2602HW-D1A",
182 .desc
= "ZyXEL P-2602HW-D1A",
183 .vendor
= ZYNOS_VENDOR_ID_ZYXEL
,
184 .model
= ZYNOS_MODEL_P_2602HW_D1A
,
185 .flash_base
= AR7_FLASH_BASE
,
186 .flash_size
= 4*1024*1024,
187 .code_start
= 0x94008000,
188 .romio_offs
= 0x20000,
189 .bootext_size
= BOOTEXT_DEF_SIZE
,
194 * Texas Instruments AR7 based boards
196 AR7BOARD1("P-660H-61", "ZyXEL P-660H-61", ZYNOS_MODEL_P_660H_61
, 2),
197 AR7BOARD1("P-660H-63", "ZyXEL P-660H-63", ZYNOS_MODEL_P_660H_63
, 2),
198 AR7BOARD1("P-660H-D1", "ZyXEL P-660H-D1", ZYNOS_MODEL_P_660H_D1
, 2),
199 AR7BOARD1("P-660H-D3", "ZyXEL P-660H-D3", ZYNOS_MODEL_P_660H_D3
, 2),
200 AR7BOARD1("P-660HW-61", "ZyXEL P-660HW-61", ZYNOS_MODEL_P_660HW_61
, 2),
201 AR7BOARD1("P-660HW-63", "ZyXEL P-660HW-63", ZYNOS_MODEL_P_660HW_63
, 2),
202 AR7BOARD1("P-660HW-67", "ZyXEL P-660HW-67", ZYNOS_MODEL_P_660HW_67
, 2),
203 AR7BOARD1("P-660HW-D1", "ZyXEL P-660HW-D1", ZYNOS_MODEL_P_660HW_D1
, 2),
204 AR7BOARD1("P-660HW-D3", "ZyXEL P-660HW-D3", ZYNOS_MODEL_P_660HW_D3
, 2),
205 AR7BOARD1("P-660R-61", "ZyXEL P-660R-61", ZYNOS_MODEL_P_660R_61
, 2),
206 AR7BOARD1("P-660R-61C", "ZyXEL P-660R-61C", ZYNOS_MODEL_P_660R_61C
, 2),
207 AR7BOARD1("P-660R-63", "ZyXEL P-660R-63", ZYNOS_MODEL_P_660R_63
, 2),
208 AR7BOARD1("P-660R-63C", "ZyXEL P-660R-63C", ZYNOS_MODEL_P_660R_63C
, 2),
209 AR7BOARD1("P-660R-67", "ZyXEL P-660R-67", ZYNOS_MODEL_P_660R_67
, 2),
210 AR7BOARD1("P-660R-D1", "ZyXEL P-660R-D1", ZYNOS_MODEL_P_660R_D1
, 2),
211 AR7BOARD1("P-660R-D3", "ZyXEL P-660R-D3", ZYNOS_MODEL_P_660R_D3
, 2),
215 .desc
= "O2 DSL Surf & Phone",
216 .vendor
= ZYNOS_VENDOR_ID_O2
,
217 .model
= ZYNOS_MODEL_O2SURF
,
218 .flash_base
= AR7_FLASH_BASE
,
219 .flash_size
= 8*1024*1024,
220 .code_start
= 0x94014000,
221 .romio_offs
= 0x40000,
222 .bootext_size
= BOOTEXT_DEF_SIZE
,
228 ATHEROSBOARD1("NBG-318S", "ZyXEL NBG-318S", ZYNOS_MODEL_NBG_318S
, 4),
231 * Atheros ar71xx based boards
233 AR71XXBOARD1("NBG-460N", "ZyXEL NBG-460N", ZYNOS_MODEL_NBG_460N
, 4),
241 #define ERR(fmt, ...) do { \
243 fprintf(stderr, "[%s] *** error: " fmt "\n", \
244 progname, ## __VA_ARGS__ ); \
247 #define ERRS(fmt, ...) do { \
250 fprintf(stderr, "[%s] *** error: " fmt ", %s\n", \
251 progname, ## __VA_ARGS__, strerror(save)); \
254 #define WARN(fmt, ...) do { \
255 fprintf(stderr, "[%s] *** warning: " fmt "\n", \
256 progname, ## __VA_ARGS__ ); \
259 #define DBG(lev, fmt, ...) do { \
260 if (verblevel < lev) \
262 fprintf(stderr, "[%s] " fmt "\n", progname, ## __VA_ARGS__ ); \
266 #define ERR_INVALID_IMAGE -2
274 FILE *stream
= (status
!= EXIT_SUCCESS
) ? stderr
: stdout
;
275 struct board_info
*board
;
277 fprintf(stream
, "Usage: %s [OPTIONS...]\n", progname
);
281 " -B <board> create image for the board specified with <board>.\n"
282 " valid <board> values:\n"
284 for (board
= boards
; board
->name
!= NULL
; board
++){
287 board
->name
, board
->desc
);
290 " -b <file>[:<align>]\n"
291 " add boot extension block to the image\n"
292 " -r <file>[:<align>]\n"
293 " add raw block to the image\n"
294 " -o <file> write output to the file <file>\n"
295 " -h show this screen\n"
306 str2u32(char *arg
, uint32_t *val
)
312 t
= strtoul(arg
, &err
, 0);
313 if (errno
|| (err
==arg
) || ((err
!= NULL
) && *err
)) {
323 str2u16(char *arg
, uint16_t *val
)
329 t
= strtoul(arg
, &err
, 0);
330 if (errno
|| (err
==arg
) || ((err
!= NULL
) && *err
) || (t
>= 0x10000)) {
339 str2u8(char *arg
, uint8_t *val
)
345 t
= strtoul(arg
, &err
, 0);
346 if (errno
|| (err
==arg
) || ((err
!= NULL
) && *err
) || (t
>= 0x100)) {
355 str2sig(char *arg
, uint32_t *sig
)
357 if (strlen(arg
) != 4)
360 *sig
= arg
[0] | (arg
[1] << 8) | (arg
[2] << 16) | (arg
[3] << 24);
367 parse_arg(char *arg
, char *buf
, char *argv
[])
375 memset(argv
, 0, MAX_ARG_COUNT
* sizeof(void *));
388 if (argl
>= MAX_ARG_LEN
) {
389 /* argument is too long */
390 argl
= MAX_ARG_LEN
-1;
393 memcpy(buf
, arg
, argl
);
396 for (i
= 0; i
< MAX_ARG_COUNT
; i
++) {
397 tok
= strsep(ap
, ":");
402 else if (tok
[0] == '\0') {
415 required_arg(char c
, char *arg
)
417 if (arg
== NULL
|| *arg
!= '-')
420 ERR("option -%c requires an argument\n", c
);
426 is_empty_arg(char *arg
)
437 csum_init(struct csum_state
*css
)
446 csum_update(uint8_t *p
, uint32_t len
, struct csum_state
*css
)
452 css
->sum
+= (css
->tmp
<< 8) + p
[0];
453 if (css
->sum
> 0xFFFF) {
462 for ( ; len
> 1; len
-= 2, p
+=2 ) {
463 css
->sum
+= (p
[0] << 8) + p
[1];
464 if (css
->sum
> 0xFFFF) {
478 csum_get(struct csum_state
*css
)
482 csum_update(&pad
, 1, css
);
487 csum_buf(uint8_t *p
, uint32_t len
)
489 struct csum_state css
;
492 csum_update(p
, len
, &css
);
493 return csum_get(&css
);
498 * routines to write data to the output file
501 write_out_data(FILE *outfile
, uint8_t *data
, size_t len
,
502 struct csum_state
*css
)
506 fwrite(data
, len
, 1, outfile
);
508 ERR("unable to write output file");
513 csum_update(data
, len
, css
);
521 write_out_padding(FILE *outfile
, size_t len
, uint8_t padc
,
522 struct csum_state
*css
)
525 size_t buflen
= sizeof(buf
);
527 memset(buf
, padc
, buflen
);
532 if (write_out_data(outfile
, buf
, buflen
, css
))
543 write_out_data_align(FILE *outfile
, uint8_t *data
, size_t len
, size_t align
,
544 struct csum_state
*css
)
549 res
= write_out_data(outfile
, data
, len
, css
);
553 padlen
= ALIGN(len
,align
) - len
;
554 res
= write_out_padding(outfile
, padlen
, 0xFF, css
);
561 write_out_header(FILE *outfile
, struct zyn_rombin_hdr
*hdr
)
563 struct zyn_rombin_hdr t
;
566 if (fseek(outfile
, 0, SEEK_SET
) != 0) {
567 ERRS("fseek failed on output file");
571 /* setup temporary header fields */
572 memset(&t
, 0, sizeof(t
));
573 t
.addr
= HOST_TO_BE32(hdr
->addr
);
574 memcpy(&t
.sig
, ROMBIN_SIGNATURE
, ROMBIN_SIG_LEN
);
576 t
.flags
= hdr
->flags
;
577 t
.osize
= HOST_TO_BE32(hdr
->osize
);
578 t
.csize
= HOST_TO_BE32(hdr
->csize
);
579 t
.ocsum
= HOST_TO_BE16(hdr
->ocsum
);
580 t
.ccsum
= HOST_TO_BE16(hdr
->ccsum
);
581 t
.mmap_addr
= HOST_TO_BE32(hdr
->mmap_addr
);
583 DBG(2, "hdr.addr = 0x%08x", hdr
->addr
);
584 DBG(2, "hdr.type = 0x%02x", hdr
->type
);
585 DBG(2, "hdr.osize = 0x%08x", hdr
->osize
);
586 DBG(2, "hdr.csize = 0x%08x", hdr
->csize
);
587 DBG(2, "hdr.flags = 0x%02x", hdr
->flags
);
588 DBG(2, "hdr.ocsum = 0x%04x", hdr
->ocsum
);
589 DBG(2, "hdr.ccsum = 0x%04x", hdr
->ccsum
);
590 DBG(2, "hdr.mmap_addr = 0x%08x", hdr
->mmap_addr
);
592 return write_out_data(outfile
, (uint8_t *)&t
, sizeof(t
), NULL
);
597 write_out_mmap(FILE *outfile
, struct fw_mmap
*mmap
, struct csum_state
*css
)
599 struct zyn_mmt_hdr
*mh
;
600 uint8_t buf
[MMAP_DATA_SIZE
];
605 memset(buf
, 0, sizeof(buf
));
607 mh
= (struct zyn_mmt_hdr
*)buf
;
609 /* TODO: needs to recreate the memory map too? */
612 /* Build user data section */
613 data
= buf
+sizeof(*mh
);
614 data
+= sprintf(data
, "Vendor 1 %d", board
->vendor
);
616 data
+= sprintf(data
, "Model 1 %d", BE16_TO_HOST(board
->model
));
618 /* TODO: make hardware version configurable? */
619 data
+= sprintf(data
, "HwVerRange 2 %d %d", 0, 0);
622 user_size
= (uint8_t *)data
- buf
;
623 mh
->user_start
= HOST_TO_BE32(mmap
->addr
+sizeof(*mh
));
624 mh
->user_end
= HOST_TO_BE32(mmap
->addr
+user_size
);
625 mh
->csum
= HOST_TO_BE16(csum_buf(buf
+sizeof(*mh
), user_size
));
627 res
= write_out_data(outfile
, buf
, sizeof(buf
), css
);
634 block_stat_file(struct fw_block
*block
)
639 if (block
->file_name
== NULL
)
642 res
= stat(block
->file_name
, &st
);
644 ERRS("stat failed on %s", block
->file_name
);
648 block
->file_size
= st
.st_size
;
654 read_magic(uint16_t *magic
)
660 f
= fopen(bootext_block
->file_name
,"r");
662 ERRS("unable to open file: %s", bootext_block
->file_name
);
667 fread(magic
, 2, 1, f
);
669 ERRS("unable to read from file: %s", bootext_block
->file_name
);
683 write_out_file(FILE *outfile
, char *name
, size_t len
, struct csum_state
*css
)
685 char buf
[FILE_BUF_LEN
];
686 size_t buflen
= sizeof(buf
);
690 DBG(2, "writing out file, name=%s, len=%d",
696 ERRS("unable to open file: %s", name
);
704 /* read data from source file */
706 fread(buf
, buflen
, 1, f
);
708 ERRS("unable to read from file: %s",name
);
713 res
= write_out_data(outfile
, buf
, buflen
, css
);
726 write_out_block(FILE *outfile
, struct fw_block
*block
, struct csum_state
*css
)
733 if (block
->file_name
== NULL
)
736 if (block
->file_size
== 0)
739 res
= write_out_file(outfile
, block
->file_name
,
740 block
->file_size
, css
);
746 write_out_image(FILE *outfile
)
748 struct fw_block
*block
;
750 struct zyn_rombin_hdr hdr
;
751 struct csum_state css
;
758 /* setup header fields */
759 memset(&hdr
, 0, sizeof(hdr
));
760 hdr
.addr
= board
->code_start
;
761 hdr
.type
= OBJECT_TYPE_BOOTEXT
;
762 hdr
.flags
= ROMBIN_FLAG_OCSUM
;
764 offset
= board
->romio_offs
;
766 res
= write_out_header(outfile
, &hdr
);
770 offset
+= sizeof(hdr
);
773 res
= write_out_block(outfile
, bootext_block
, &css
);
777 offset
+= bootext_block
->file_size
;
778 if (offset
> (board
->romio_offs
+ board
->bootext_size
)) {
779 ERR("bootext file '%s' is too big", bootext_block
->file_name
);
783 padlen
= ALIGN(offset
, MMAP_ALIGN
) - offset
;
784 res
= write_out_padding(outfile
, padlen
, 0xFF, &css
);
790 mmap
.addr
= board
->flash_base
+ offset
;
791 res
= write_out_mmap(outfile
, &mmap
, &css
);
795 offset
+= MMAP_DATA_SIZE
;
797 if ((offset
- board
->romio_offs
) < board
->bootext_size
) {
798 padlen
= board
->romio_offs
+ board
->bootext_size
- offset
;
799 res
= write_out_padding(outfile
, padlen
, 0xFF, &css
);
804 DBG(2, "bootext end at %08x", offset
);
807 for (i
= 0; i
< num_blocks
; i
++) {
810 if (block
->type
== BLOCK_TYPE_BOOTEXT
)
813 padlen
= ALIGN(offset
, block
->align
) - offset
;
814 res
= write_out_padding(outfile
, padlen
, 0xFF, &css
);
819 res
= write_out_block(outfile
, block
, &css
);
822 offset
+= block
->file_size
;
825 padlen
= ALIGN(offset
, 4) - offset
;
826 res
= write_out_padding(outfile
, padlen
, 0xFF, &css
);
831 csum
= csum_get(&css
);
832 hdr
.mmap_addr
= mmap
.addr
;
835 res
= read_magic(&hdr
.ocsum
);
838 hdr
.ocsum
= BE16_TO_HOST(hdr
.ocsum
);
840 if (csum
<= hdr
.ocsum
)
841 t
= hdr
.ocsum
- csum
;
843 t
= hdr
.ocsum
- csum
- 1;
845 DBG(2, "ocsum=%04x, csum=%04x, fix=%04x", hdr
.ocsum
, csum
, t
);
848 res
= write_out_data(outfile
, (uint8_t *)&t
, 2, NULL
);
853 res
= write_out_header(outfile
, &hdr
);
860 find_board(char *name
)
862 struct board_info
*ret
;
863 struct board_info
*board
;
866 for (board
= boards
; board
->name
!= NULL
; board
++){
867 if (strcasecmp(name
, board
->name
) == 0) {
878 parse_opt_board(char ch
, char *arg
)
881 DBG(1,"parsing board option: -%c %s", ch
, arg
);
884 ERR("only one board option allowed");
888 if (required_arg(ch
, arg
))
891 board
= find_board(arg
);
893 ERR("invalid/unknown board specified: %s", arg
);
902 parse_opt_ofname(char ch
, char *arg
)
905 if (ofname
!= NULL
) {
906 ERR("only one output file allowed");
910 if (required_arg(ch
, arg
))
920 parse_opt_block(char ch
, char *arg
)
922 char buf
[MAX_ARG_LEN
];
923 char *argv
[MAX_ARG_COUNT
];
926 struct fw_block
*block
;
929 if ( num_blocks
>= MAX_NUM_BLOCKS
) {
930 ERR("too many blocks specified");
934 block
= &blocks
[num_blocks
++];
936 /* setup default field values */
942 ERR("only one boot extension block allowed");
945 block
->type
= BLOCK_TYPE_BOOTEXT
;
946 bootext_block
= block
;
949 block
->type
= BLOCK_TYPE_RAW
;
953 argc
= parse_arg(arg
, buf
, argv
);
957 if (is_empty_arg(p
)) {
958 ERR("no file specified in %s", arg
);
961 block
->file_name
= strdup(p
);
962 if (block
->file_name
== NULL
) {
963 ERR("not enough memory");
968 if (block
->type
== BLOCK_TYPE_BOOTEXT
)
972 if (!is_empty_arg(p
)) {
973 if (str2u32(p
, &block
->align
) != 0) {
974 ERR("invalid block align in %s", arg
);
984 calc_block_offsets(int type
, uint32_t *offset
)
986 struct fw_block
*block
;
991 DBG(1,"calculating block offsets, starting with %lu",
995 for (i
= 0; i
< num_blocks
; i
++) {
998 if (block
->type
!= type
)
1001 next_offs
= ALIGN(*offset
, block
->align
);
1002 avail
= board
->flash_size
- board
->romio_offs
- next_offs
;
1003 if (block
->file_size
> avail
) {
1004 ERR("file %s is too big, offset = %u, size=%u,"
1005 " align = %u", block
->file_name
,
1006 (unsigned)next_offs
,
1007 (unsigned)block
->file_size
,
1008 (unsigned)block
->align
);
1013 block
->padlen
= next_offs
- *offset
;
1014 *offset
+= block
->file_size
;
1021 process_blocks(void)
1023 struct fw_block
*block
;
1028 /* collecting file stats */
1029 for (i
= 0; i
< num_blocks
; i
++) {
1031 res
= block_stat_file(block
);
1036 offset
= board
->romio_offs
+ bootext_block
->file_size
;
1037 res
= calc_block_offsets(BLOCK_TYPE_RAW
, &offset
);
1044 main(int argc
, char *argv
[])
1046 int optinvalid
= 0; /* flag for invalid option */
1048 int res
= EXIT_FAILURE
;
1052 progname
=basename(argv
[0]);
1054 opterr
= 0; /* could not print standard getopt error messages */
1058 c
= getopt(argc
, argv
, "b:B:ho:r:v");
1065 optinvalid
= parse_opt_block(c
,optarg
);
1068 optinvalid
= parse_opt_board(c
,optarg
);
1071 optinvalid
= parse_opt_ofname(c
,optarg
);
1077 usage(EXIT_SUCCESS
);
1083 if (optinvalid
!= 0 ) {
1084 ERR("invalid option: -%c", optopt
);
1089 if (board
== NULL
) {
1090 ERR("no board specified");
1094 if (ofname
== NULL
) {
1095 ERR("no output file specified");
1099 if (optind
< argc
) {
1100 ERR("invalid option: %s", argv
[optind
]);
1104 if (process_blocks() != 0) {
1108 outfile
= fopen(ofname
, "w");
1109 if (outfile
== NULL
) {
1110 ERRS("could not open \"%s\" for writing", ofname
);
1114 if (write_out_image(outfile
) != 0)
1117 DBG(1,"Image file %s completed.", ofname
);
1124 if (res
!= EXIT_SUCCESS
) {
This page took 0.090642 seconds and 5 git commands to generate.