[brcm63xx] mask the USB_EHCI_ROOT_HUB_TT symbol since brcm63xx ehci does not implemen...
[openwrt.git] / target / linux / generic-2.6 / patches-2.6.29 / 630-phy_packets.patch
1 --- a/drivers/net/phy/phy_device.c
2 +++ b/drivers/net/phy/phy_device.c
3 @@ -143,6 +143,18 @@ int phy_scan_fixups(struct phy_device *p
4 }
5 EXPORT_SYMBOL(phy_scan_fixups);
6
7 +static int generic_receive_skb(struct sk_buff *skb)
8 +{
9 + skb->protocol = eth_type_trans(skb, skb->dev);
10 + return netif_receive_skb(skb);
11 +}
12 +
13 +static int generic_rx(struct sk_buff *skb)
14 +{
15 + skb->protocol = eth_type_trans(skb, skb->dev);
16 + return netif_rx(skb);
17 +}
18 +
19 struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
20 {
21 struct phy_device *dev;
22 @@ -168,6 +180,8 @@ struct phy_device* phy_device_create(str
23 dev->bus = bus;
24
25 dev->state = PHY_DOWN;
26 + dev->netif_receive_skb = &generic_receive_skb;
27 + dev->netif_rx = &generic_rx;
28
29 mutex_init(&dev->lock);
30
31 --- a/include/linux/phy.h
32 +++ b/include/linux/phy.h
33 @@ -326,6 +326,20 @@ struct phy_device {
34 void (*adjust_link)(struct net_device *dev);
35
36 void (*adjust_state)(struct net_device *dev);
37 +
38 + /*
39 + * By default these point to the original functions
40 + * with the same name. adding them to the phy_device
41 + * allows the phy driver to override them for packet
42 + * mangling if the ethernet driver supports it
43 + * This is required to support some really horrible
44 + * switches such as the Marvell 88E6060
45 + */
46 + int (*netif_receive_skb)(struct sk_buff *skb);
47 + int (*netif_rx)(struct sk_buff *skb);
48 +
49 + /* alignment offset for packets */
50 + int pkt_align;
51 };
52 #define to_phy_device(d) container_of(d, struct phy_device, dev)
53
54 --- a/include/linux/netdevice.h
55 +++ b/include/linux/netdevice.h
56 @@ -747,6 +747,7 @@ struct net_device
57 void *ax25_ptr; /* AX.25 specific data */
58 struct wireless_dev *ieee80211_ptr; /* IEEE 802.11 specific data,
59 assign before registering */
60 + void *phy_ptr; /* PHY device specific data */
61
62 /*
63 * Cache line mostly used on receive path (including eth_type_trans())
This page took 0.052193 seconds and 5 git commands to generate.