Use 2.6.25.6 for rdc
[openwrt.git] / target / linux / ar7 / patches-2.6.24 / 100-board_support.patch
1 Index: linux-2.6.24.7/arch/mips/Kconfig
2 ===================================================================
3 --- linux-2.6.24.7.orig/arch/mips/Kconfig
4 +++ linux-2.6.24.7/arch/mips/Kconfig
5 @@ -16,6 +16,24 @@ choice
6 prompt "System type"
7 default SGI_IP22
8
9 +config AR7
10 + bool "Texas Instruments AR7"
11 + select BOOT_ELF32
12 + select DMA_NONCOHERENT
13 + select CEVT_R4K
14 + select CSRC_R4K
15 + select IRQ_CPU
16 + select NO_EXCEPT_FILL
17 + select SWAP_IO_SPACE
18 + select SYS_HAS_CPU_MIPS32_R1
19 + select SYS_HAS_EARLY_PRINTK
20 + select SYS_SUPPORTS_32BIT_KERNEL
21 + select SYS_SUPPORTS_KGDB
22 + select SYS_SUPPORTS_LITTLE_ENDIAN
23 + select SYS_SUPPORTS_BIG_ENDIAN
24 + select GENERIC_GPIO
25 + select GENERIC_HARDIRQS_NO__DO_IRQ
26 +
27 config MACH_ALCHEMY
28 bool "Alchemy processor based machines"
29
30 Index: linux-2.6.24.7/arch/mips/kernel/traps.c
31 ===================================================================
32 --- linux-2.6.24.7.orig/arch/mips/kernel/traps.c
33 +++ linux-2.6.24.7/arch/mips/kernel/traps.c
34 @@ -1093,9 +1093,22 @@ void *set_except_vector(int n, void *add
35
36 exception_handlers[n] = handler;
37 if (n == 0 && cpu_has_divec) {
38 - *(u32 *)(ebase + 0x200) = 0x08000000 |
39 - (0x03ffffff & (handler >> 2));
40 - flush_icache_range(ebase + 0x200, ebase + 0x204);
41 + if ((handler ^ (ebase + 4)) & 0xfc000000) {
42 + /* lui k0, 0x0000 */
43 + *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16);
44 + /* ori k0, 0x0000 */
45 + *(u32 *)(ebase + 0x204) =
46 + 0x375a0000 | (handler & 0xffff);
47 + /* jr k0 */
48 + *(u32 *)(ebase + 0x208) = 0x03400008;
49 + /* nop */
50 + *(u32 *)(ebase + 0x20C) = 0x00000000;
51 + flush_icache_range(ebase + 0x200, ebase + 0x210);
52 + } else {
53 + *(u32 *)(ebase + 0x200) =
54 + 0x08000000 | (0x03ffffff & (handler >> 2));
55 + flush_icache_range(ebase + 0x200, ebase + 0x204);
56 + }
57 }
58 return (void *)old_handler;
59 }
60 Index: linux-2.6.24.7/arch/mips/Makefile
61 ===================================================================
62 --- linux-2.6.24.7.orig/arch/mips/Makefile
63 +++ linux-2.6.24.7/arch/mips/Makefile
64 @@ -159,6 +159,13 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/s
65 #
66
67 #
68 +# Texas Instruments AR7
69 +#
70 +core-$(CONFIG_AR7) += arch/mips/ar7/
71 +cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7
72 +load-$(CONFIG_AR7) += 0xffffffff94100000
73 +
74 +#
75 # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
76 #
77 core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
78 Index: linux-2.6.24.7/include/asm-mips/page.h
79 ===================================================================
80 --- linux-2.6.24.7.orig/include/asm-mips/page.h
81 +++ linux-2.6.24.7/include/asm-mips/page.h
82 @@ -184,8 +184,10 @@ typedef struct { unsigned long pgprot; }
83 #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
84 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
85
86 -#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
87 -#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
88 +#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \
89 + PHYS_OFFSET)
90 +#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \
91 + PHYS_OFFSET)
92
93 #include <asm-generic/memory_model.h>
94 #include <asm-generic/page.h>
This page took 0.050334 seconds and 5 git commands to generate.