projects / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
ramips: switch to 2.6.39.2
[openwrt.git] / target / linux / omap24xx / patches-2.6.38 / 900-n810-battery-management.patch
1 --- a/drivers/cbus/Kconfig
2 +++ b/drivers/cbus/Kconfig
3 @@ -72,4 +72,12 @@ config CBUS_RETU_HEADSET
4 to Retu/Vilma. Detection state and events are exposed through
5 sysfs.
6
7 +config N810BM
8 + depends on CBUS_RETU && CBUS_TAHVO
9 + tristate "Nokia n810 battery management"
10 + ---help---
11 + Nokia n810 device battery management.
12 +
13 + If unsure, say N.
14 +
15 endmenu
16 --- a/drivers/cbus/Makefile
17 +++ b/drivers/cbus/Makefile
18 @@ -11,3 +11,6 @@ obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += r
19 obj-$(CONFIG_CBUS_RETU_RTC) += retu-rtc.o
20 obj-$(CONFIG_CBUS_RETU_WDT) += retu-wdt.o
21 obj-$(CONFIG_CBUS_RETU_HEADSET) += retu-headset.o
22 +n810bm-y += n810bm_main.o
23 +n810bm-y += lipocharge.o
24 +obj-$(CONFIG_N810BM) += n810bm.o
25 --- /dev/null
26 +++ b/drivers/cbus/n810bm_main.c
27 @@ -0,0 +1,1586 @@
28 +/*
29 + * Nokia n810 battery management
30 + *
31 + * WARNING: This driver is based on unconfirmed documentation.
32 + * It is possibly dangerous to use this software.
33 + * Use this software at your own risk!
34 + *
35 + * Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
36 + *
37 + * This program is free software; you can redistribute it and/or
38 + * modify it under the terms of the GNU General Public License
39 + * as published by the Free Software Foundation; either version 2
40 + * of the License, or (at your option) any later version.
41 + *
42 + * This program is distributed in the hope that it will be useful,
43 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
44 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
45 + * GNU General Public License for more details.
46 + */
47 +
48 +#define DEBUG
49 +
50 +#include <linux/module.h>
51 +#include <linux/device.h>
52 +#include <linux/platform_device.h>
53 +#include <linux/slab.h>
54 +#include <linux/mutex.h>
55 +#include <linux/timer.h>
56 +#include <linux/firmware.h>
57 +#include <linux/bitops.h>
58 +#include <linux/workqueue.h>
59 +#include <linux/delay.h>
60 +
61 +#include "cbus.h"
62 +#include "retu.h"
63 +#include "tahvo.h"
64 +#include "lipocharge.h"
65 +
66 +
67 +#define N810BM_PMM_BLOCK_FILENAME "n810-cal-bme-pmm.fw"
68 +#define N810BM_PMM_BLOCK_SIZE 0x600
69 +#define N810BM_PMM_GROUP_SIZE 0x200
70 +#define N810BM_PMM_ELEM_SIZE 0x10
71 +
72 +#define N810BM_CHECK_INTERVAL (HZ * 2)
73 +#define N810BM_MIN_VOLTAGE_THRES 3200 /* Absolute minimum voltage threshold */
74 +
75 +
76 +/* RETU_ADC_BSI
77 + * The battery size indicator ADC measures the resistance between
78 + * the battery BSI pin and ground. This is used to detect the battery
79 + * capacity, as the BSI resistor is related to capacity.
80 + *
81 + * Manually measured lookup table.
82 + * Hard to measure, thus not very accurate.
83 + *
84 + * Resistance | ADC value
85 + * ========================
86 + * 120k | 0x3AC
87 + * 110k | 0x37C
88 + * 100k | 0x351
89 + * 90k | 0x329
90 + */
91 +
92 +/* RETU_ADC_BATTVOLT
93 + * Manually measured lookup table.
94 + * Hard to measure, thus not very accurate.
95 + *
96 + * Voltage | ADC value
97 + * =====================
98 + * 2.80V | 0x037
99 + * 2.90V | 0x05E
100 + * 3.00V | 0x090
101 + * 3.10V | 0x0A4
102 + * 3.20V | 0x0CC
103 + * 3.30V | 0x0EF
104 + * 3.40V | 0x115
105 + * 3.50V | 0x136
106 + * 3.60V | 0x15C
107 + * 3.70V | 0x187
108 + * 3.80V | 0x1A5
109 + * 3.90V | 0x1C9
110 + * 4.00V | 0x1ED
111 + * 4.10V | 0x212
112 + * 4.20V | 0x236
113 + */
114 +
115 +
116 +/* PMM block ADC IDs */
117 +enum n810bm_pmm_adc_id {
118 + N810BM_PMM_ADC_BATVOLT = 0x01, /* Battery voltage */
119 + N810BM_PMM_ADC_CHGVOLT = 0x02, /* Charger voltage */
120 + N810BM_PMM_ADC_GND2 = 0x03, /* Ground 0V */
121 + N810BM_PMM_ADC_BSI = 0x04, /* Battery size indicator */
122 + N810BM_PMM_ADC_BATTEMP = 0x05, /* Battery temperature */
123 + N810BM_PMM_ADC_HEADSET = 0x06, /* Headset detection */
124 + N810BM_PMM_ADC_HOOKDET = 0x07, /* Hook detection */
125 + N810BM_PMM_ADC_LIGHTSENS = 0x08, /* Light sensor */
126 + N810BM_PMM_ADC_BATCURR = 0x0E, /* Battery current */
127 + N810BM_PMM_ADC_BKUPVOLT = 0x13, /* Backup battery voltage */
128 + N810BM_PMM_ADC_LIGHTTEMP = 0x14, /* Light sensor temperature */
129 + N810BM_PMM_ADC_RFGP = 0x15, /* RF GP */
130 + N810BM_PMM_ADC_WBTX = 0x16, /* Wideband TX detection */
131 + N810BM_PMM_ADC_RETUTEMP = 0x17, /* RETU chip temperature */
132 + N810BM_PMM_ADC_0xFE = 0xFE,
133 +};
134 +
135 +struct n810bm_adc_calib {
136 + enum n810bm_pmm_adc_id id;
137 + u8 flags;
138 + u8 adc_groupnr;
139 + u32 field1;
140 + u32 field2;
141 + u16 field3;
142 + u16 field4;
143 +};
144 +
145 +struct n810bm_calib {
146 + struct n810bm_adc_calib adc[25];
147 +};
148 +
149 +enum n810bm_capacity {
150 + N810BM_CAP_UNKNOWN = -1,
151 + N810BM_CAP_NONE = 0,
152 + N810BM_CAP_1500MAH = 1500, /* 1500 mAh battery */
153 +};
154 +
155 +enum n810bm_notify_flags {
156 + N810BM_NOTIFY_charger_present,
157 + N810BM_NOTIFY_charger_state,
158 + N810BM_NOTIFY_charger_pwm,
159 +};
160 +
161 +struct n810bm {
162 + bool battery_present; /* A battery is inserted */
163 + bool charger_present; /* The charger is connected */
164 + enum n810bm_capacity capacity; /* The capacity of the inserted battery (if any) */
165 +
166 + bool charger_enabled; /* Want to charge? */
167 + struct lipocharge charger; /* Charger subsystem */
168 + unsigned int active_current_pwm; /* Active value of TAHVO_REG_CHGCURR */
169 + int current_measure_enabled; /* Current measure enable refcount */
170 +
171 + struct platform_device *pdev;
172 + struct n810bm_calib calib; /* Calibration data */
173 +
174 + bool verbose_charge_log; /* Verbose charge logging */
175 +
176 + unsigned long notify_flags;
177 + struct work_struct notify_work;
178 + struct work_struct currmeas_irq_work;
179 + struct delayed_work periodic_check_work;
180 +
181 + bool initialized; /* The hardware was initialized */
182 + struct mutex mutex;
183 +};
184 +
185 +static void n810bm_notify_charger_present(struct n810bm *bm);
186 +static void n810bm_notify_charger_state(struct n810bm *bm);
187 +static void n810bm_notify_charger_pwm(struct n810bm *bm);
188 +
189 +
190 +static struct platform_device *n810bm_retu_device;
191 +static struct platform_device *n810bm_tahvo_device;
192 +
193 +
194 +static inline struct n810bm * device_to_n810bm(struct device *dev)
195 +{
196 + struct platform_device *pdev = to_platform_device(dev);
197 + struct n810bm *bm = platform_get_drvdata(pdev);
198 +
199 + return bm;
200 +}
201 +
202 +static inline bool n810bm_known_battery_present(struct n810bm *bm)
203 +{
204 + return bm->battery_present &&
205 + bm->capacity != N810BM_CAP_UNKNOWN &&
206 + bm->capacity != N810BM_CAP_NONE;
207 +}
208 +
209 +static NORET_TYPE void n810bm_emergency(struct n810bm *bm, const char *message) ATTRIB_NORET;
210 +static void n810bm_emergency(struct n810bm *bm, const char *message)
211 +{
212 + printk(KERN_EMERG "n810 battery management fatal fault: %s\n", message);
213 + cbus_emergency();
214 +}
215 +
216 +static u16 tahvo_read(struct n810bm *bm, unsigned int reg)
217 +{
218 + return tahvo_read_reg(reg);
219 +}
220 +
221 +static void tahvo_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
222 +{
223 + tahvo_set_clear_reg_bits(reg, set, mask);
224 +}
225 +
226 +static inline void tahvo_write(struct n810bm *bm, unsigned int reg, u16 value)
227 +{
228 + unsigned long flags;
229 +
230 + spin_lock_irqsave(&tahvo_lock, flags);
231 + tahvo_write_reg(reg, value);
232 + spin_unlock_irqrestore(&tahvo_lock, flags);
233 +}
234 +
235 +static inline void tahvo_set(struct n810bm *bm, unsigned int reg, u16 mask)
236 +{
237 + tahvo_set_clear_reg_bits(reg, mask, mask);
238 +}
239 +
240 +static inline void tahvo_clear(struct n810bm *bm, unsigned int reg, u16 mask)
241 +{
242 + tahvo_set_clear_reg_bits(reg, 0, mask);
243 +}
244 +
245 +static u16 retu_read(struct n810bm *bm, unsigned int reg)
246 +{
247 + return retu_read_reg(&n810bm_retu_device->dev, reg);
248 +}
249 +
250 +static void retu_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
251 +{
252 + retu_set_clear_reg_bits(&n810bm_retu_device->dev, reg, set, mask);
253 +}
254 +
255 +static inline void retu_write(struct n810bm *bm, unsigned int reg, u16 value)
256 +{
257 + retu_write_reg(&n810bm_retu_device->dev, reg, value);
258 +}
259 +
260 +static int retu_adc_average(struct n810bm *bm, unsigned int chan,
261 + unsigned int nr_passes)
262 +{
263 + unsigned int i, value = 0;
264 + int ret;
265 +
266 + if (WARN_ON(!nr_passes))
267 + return 0;
268 + for (i = 0; i < nr_passes; i++) {
269 + ret = retu_read_adc(&n810bm_retu_device->dev, chan);
270 + if (ret < 0)
271 + return ret;
272 + value += ret;
273 + }
274 + value /= nr_passes;
275 +
276 + return value;
277 +}
278 +
279 +static struct n810bm_adc_calib * n810bm_get_adc_calib(struct n810bm *bm,
280 + enum n810bm_pmm_adc_id id)
281 +{
282 + unsigned int index = 0;
283 + struct n810bm_adc_calib *cal;
284 +
285 + if (id != N810BM_PMM_ADC_0xFE)
286 + index = (unsigned int)id + 1;
287 + if (index >= ARRAY_SIZE(bm->calib.adc))
288 + return NULL;
289 +
290 + cal = &bm->calib.adc[index];
291 + WARN_ON(cal->id && cal->id != id);
292 +
293 + return cal;
294 +}
295 +
296 +static int pmm_record_get(struct n810bm *bm,
297 + const struct firmware *pmm_block,
298 + void *buffer, size_t length,
299 + unsigned int group, unsigned int element, unsigned int offset)
300 +{
301 + const u8 *pmm_area = pmm_block->data;
302 + u8 active_group_mask;
303 +
304 + if (pmm_block->size != N810BM_PMM_BLOCK_SIZE)
305 + return -EINVAL;
306 + if (group >= N810BM_PMM_BLOCK_SIZE / N810BM_PMM_GROUP_SIZE)
307 + return -EINVAL;
308 + if (element >= N810BM_PMM_GROUP_SIZE / N810BM_PMM_ELEM_SIZE)
309 + return -EINVAL;
310 + if (offset >= N810BM_PMM_ELEM_SIZE || length > N810BM_PMM_ELEM_SIZE ||
311 + length + offset > N810BM_PMM_ELEM_SIZE)
312 + return -EINVAL;
313 +
314 + active_group_mask = pmm_area[16];
315 + if (!(active_group_mask & (1 << group))) {
316 + dev_dbg(&bm->pdev->dev, "pwm_record_get: Requested group %u, "
317 + "but group is not active", group);
318 + return -ENOENT;
319 + }
320 +
321 + memcpy(buffer,
322 + pmm_area + group * N810BM_PMM_GROUP_SIZE
323 + + element * N810BM_PMM_ELEM_SIZE
324 + + offset,
325 + length);
326 +
327 + return 0;
328 +}
329 +
330 +/* PMM block group 1 element */
331 +struct group1_element {
332 + u8 id;
333 + u8 flags;
334 + u8 adc_groupnr;
335 + u8 _padding;
336 + __le32 field1;
337 + __le32 field2;
338 +} __packed;
339 +
340 +static int extract_group1_elem(struct n810bm *bm,
341 + const struct firmware *pmm_block,
342 + const enum n810bm_pmm_adc_id *pmm_adc_ids, size_t nr_pmm_adc_ids,
343 + u32 field1_mask, u32 field2_mask)
344 +{
345 + struct group1_element elem;
346 + int err;
347 + unsigned int i, element_nr;
348 + struct n810bm_adc_calib *adc_calib;
349 +
350 + for (i = 0; i < nr_pmm_adc_ids; i++) {
351 + element_nr = (unsigned int)(pmm_adc_ids[i]) + 3;
352 +
353 + err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem),
354 + 1, element_nr, 0);
355 + if (err)
356 + continue;
357 + adc_calib = n810bm_get_adc_calib(bm, elem.id);
358 + if (!adc_calib) {
359 + dev_err(&bm->pdev->dev, "extract_group1_elem: "
360 + "Could not get calib element for 0x%02X",
361 + elem.id);
362 + return -EINVAL;
363 + }
364 +
365 + if (adc_calib->flags == elem.flags) {
366 + adc_calib->field1 = le32_to_cpu(elem.field1) & field1_mask;
367 + adc_calib->field2 = le32_to_cpu(elem.field2) & field2_mask;
368 + } else {
369 + dev_dbg(&bm->pdev->dev, "extract_group1_elem: "
370 + "Not extracting fields due to flags mismatch: "
371 + "0x%02X vs 0x%02X",
372 + adc_calib->flags, elem.flags);
373 + }
374 + }
375 +
376 + return 0;
377 +}
378 +
379 +static int n810bm_parse_pmm_group1(struct n810bm *bm,
380 + const struct firmware *pmm_block)
381 +{
382 + struct n810bm_adc_calib *adc_calib;
383 + struct group1_element elem;
384 + int err;
385 +
386 + static const enum n810bm_pmm_adc_id pmm_adc_ids_1[] = {
387 + N810BM_PMM_ADC_BATVOLT,
388 + N810BM_PMM_ADC_CHGVOLT,
389 + N810BM_PMM_ADC_BKUPVOLT,
390 + N810BM_PMM_ADC_BATCURR,
391 + };
392 + static const enum n810bm_pmm_adc_id pmm_adc_ids_2[] = {
393 + N810BM_PMM_ADC_BSI,
394 + };
395 + static const enum n810bm_pmm_adc_id pmm_adc_ids_3[] = {
396 + N810BM_PMM_ADC_BATTEMP,
397 + };
398 +
399 + /* Parse element 2 */
400 + err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem),
401 + 1, 2, 0);
402 + if (err) {
403 + dev_err(&bm->pdev->dev,
404 + "PMM: Failed to get group 1 / element 2");
405 + return err;
406 + }
407 + if (elem.id == N810BM_PMM_ADC_0xFE && elem.flags == 0x05) {
408 + adc_calib = n810bm_get_adc_calib(bm, elem.id);
409 + if (!adc_calib) {
410 + dev_err(&bm->pdev->dev,
411 + "calib extract: Failed to get 0xFE calib");
412 + return -EINVAL;
413 + }
414 + adc_calib->id = elem.id;
415 + adc_calib->flags = elem.flags;
416 + adc_calib->field1 = le32_to_cpu(elem.field1);
417 + adc_calib->field2 = le32_to_cpu(elem.field2);
418 + }
419 +
420 + err = extract_group1_elem(bm, pmm_block,
421 + pmm_adc_ids_1, ARRAY_SIZE(pmm_adc_ids_1),
422 + 0xFFFFFFFF, 0xFFFFFFFF);
423 + if (err)
424 + return err;
425 + err = extract_group1_elem(bm, pmm_block,
426 + pmm_adc_ids_2, ARRAY_SIZE(pmm_adc_ids_2),
427 + 0xFFFFFFFF, 0);
428 + if (err)
429 + return err;
430 + err = extract_group1_elem(bm, pmm_block,
431 + pmm_adc_ids_3, ARRAY_SIZE(pmm_adc_ids_3),
432 + 0xFFFFFFFF, 0x0000FFFF);
433 + if (err)
434 + return err;
435 +
436 + return 0;
437 +}
438 +
439 +static int n810bm_parse_pmm_group2(struct n810bm *bm,
440 + const struct firmware *pmm_block)
441 +{
442 + dev_err(&bm->pdev->dev, "TODO: CAL BME PMM group 2 parser not implemented, yet");
443 + return -EOPNOTSUPP;
444 +}
445 +
446 +static void n810bm_adc_calib_set_defaults(struct n810bm *bm)
447 +{
448 + struct n810bm_adc_calib *adc_calib;
449 + unsigned int i;
450 +
451 + static const struct n810bm_adc_calib defaults[] = {
452 + /* ADC group-nr 0 */
453 + {
454 + .id = N810BM_PMM_ADC_HEADSET,
455 + .flags = 0x00,
456 + .adc_groupnr = 0,
457 + }, {
458 + .id = N810BM_PMM_ADC_HOOKDET,
459 + .flags = 0x00,
460 + .adc_groupnr = 0,
461 + }, {
462 + .id = N810BM_PMM_ADC_RFGP,
463 + .flags = 0x00,
464 + .adc_groupnr = 0,
465 + }, {
466 + .id = N810BM_PMM_ADC_LIGHTSENS,
467 + .flags = 0x00,
468 + .adc_groupnr = 0,
469 + }, {
470 + .id = N810BM_PMM_ADC_WBTX,
471 + .flags = 0x00,
472 + .adc_groupnr = 0,
473 + }, {
474 + .id = N810BM_PMM_ADC_RETUTEMP,
475 + .flags = 0x00,
476 + .adc_groupnr = 0,
477 + }, {
478 + .id = N810BM_PMM_ADC_GND2,
479 + .flags = 0x00,
480 + .adc_groupnr = 0,
481 + },
482 + /* ADC group-nr 1 */
483 + {
484 + .id = N810BM_PMM_ADC_0xFE,
485 + .flags = 0x05,
486 + .adc_groupnr = 1,
487 + .field1 = (u32)-2,
488 + .field2 = 13189,
489 + }, {
490 + .id = N810BM_PMM_ADC_BATVOLT,
491 + .flags = 0x01,
492 + .adc_groupnr = 1,
493 + .field1 = 2527,
494 + .field2 = 21373,
495 + }, {
496 + .id = N810BM_PMM_ADC_CHGVOLT,
497 + .flags = 0x01,
498 + .adc_groupnr = 1,
499 + .field1 = 0,
500 + .field2 = 129848,
501 + }, {
502 + .id = N810BM_PMM_ADC_BKUPVOLT,
503 + .flags = 0x01,
504 + .adc_groupnr = 1,
505 + .field1 = 0,
506 + .field2 = 20000,
507 + }, {
508 + .id = N810BM_PMM_ADC_BATCURR,
509 + .flags = 0x06,
510 + .adc_groupnr = 1,
511 + .field1 = 0,
512 + .field2 = 9660,
513 + },
514 + /* ADC group-nr 2 */
515 + {
516 + .id = N810BM_PMM_ADC_BSI,
517 + .flags = 0x02,
518 + .adc_groupnr = 2,
519 + .field1 = 1169,
520 + .field2 = 0,
521 + },
522 + /* ADC group-nr 3 */
523 + {
524 + .id = N810BM_PMM_ADC_BATTEMP,
525 + .flags = 0x03,
526 + .adc_groupnr = 3,
527 + .field1 = 265423000,
528 + .field2 = 298,
529 + },
530 + /* ADC group-nr 4 */
531 + {
532 + .id = N810BM_PMM_ADC_LIGHTTEMP,
533 + .flags = 0x04,
534 + .adc_groupnr = 4,
535 + .field1 = 19533778,
536 + .field2 = 308019670,
537 + .field3 = 4700,
538 + .field4 = 2500,
539 + },
540 + };
541 +
542 + /* Clear the array */
543 + memset(&bm->calib.adc, 0, sizeof(bm->calib.adc));
544 + for (i = 0; i < ARRAY_SIZE(bm->calib.adc); i++)
545 + bm->calib.adc[i].flags = 0xFF;
546 +
547 + /* Copy the defaults */
548 + for (i = 0; i < ARRAY_SIZE(defaults); i++) {
549 + adc_calib = n810bm_get_adc_calib(bm, defaults[i].id);
550 + if (WARN_ON(!adc_calib))
551 + continue;
552 + *adc_calib = defaults[i];
553 + }
554 +}
555 +
556 +static int n810bm_parse_pmm_block(struct n810bm *bm,
557 + const struct firmware *pmm_block)
558 +{
559 + u8 byte;
560 + int err;
561 + unsigned int i, count;
562 + struct n810bm_adc_calib *adc_calib;
563 +
564 + /* Initialize to defaults */
565 + n810bm_adc_calib_set_defaults(bm);
566 +
567 + /* Parse the PMM data */
568 + err = pmm_record_get(bm, pmm_block, &byte, sizeof(byte),
569 + 1, 0, 0); /* group 1 / element 0 */
570 + err |= (byte != 0x01);
571 + err |= pmm_record_get(bm, pmm_block, &byte, sizeof(byte),
572 + 1, 1, 0); /* group 1 / element 1 */
573 + err |= (byte != 0x01);
574 + if (err)
575 + err = n810bm_parse_pmm_group2(bm, pmm_block);
576 + else
577 + err = n810bm_parse_pmm_group1(bm, pmm_block);
578 + if (err)
579 + return err;
580 +
581 + /* Sanity checks */
582 + for (i = 0, count = 0; i < ARRAY_SIZE(bm->calib.adc); i++) {
583 + adc_calib = &bm->calib.adc[i];
584 + if (adc_calib->flags == 0xFF)
585 + continue;
586 + switch (adc_calib->id) {
587 + case N810BM_PMM_ADC_BATVOLT:
588 + if (adc_calib->field1 < 2400 ||
589 + adc_calib->field1 > 2700)
590 + goto value_check_fail;
591 + if (adc_calib->field2 < 20000 ||
592 + adc_calib->field2 > 23000)
593 + goto value_check_fail;
594 + count++;
595 + break;
596 + case N810BM_PMM_ADC_BSI:
597 + if (adc_calib->field1 < 1100 ||
598 + adc_calib->field1 > 1300)
599 + goto value_check_fail;
600 + count++;
601 + break;
602 + case N810BM_PMM_ADC_BATCURR:
603 + if (adc_calib->field2 < 7000 ||
604 + adc_calib->field2 > 12000)
605 + goto value_check_fail;
606 + count++;
607 + break;
608 + case N810BM_PMM_ADC_0xFE:
609 + if ((s32)adc_calib->field1 > 14 ||
610 + (s32)adc_calib->field1 < -14)
611 + goto value_check_fail;
612 + if (adc_calib->field2 < 13000 ||
613 + adc_calib->field2 > 13350)
614 + goto value_check_fail;
615 + count++;
616 + break;
617 + case N810BM_PMM_ADC_CHGVOLT:
618 + case N810BM_PMM_ADC_BATTEMP:
619 + case N810BM_PMM_ADC_BKUPVOLT:
620 + count++;
621 + break;
622 + case N810BM_PMM_ADC_GND2:
623 + case N810BM_PMM_ADC_HOOKDET:
624 + case N810BM_PMM_ADC_LIGHTSENS:
625 + case N810BM_PMM_ADC_HEADSET:
626 + case N810BM_PMM_ADC_LIGHTTEMP:
627 + case N810BM_PMM_ADC_RFGP:
628 + case N810BM_PMM_ADC_WBTX:
629 + case N810BM_PMM_ADC_RETUTEMP:
630 + break;
631 + }
632 + dev_dbg(&bm->pdev->dev,
633 + "ADC 0x%02X calib: 0x%02X 0x%02X 0x%08X 0x%08X 0x%04X 0x%04X",
634 + adc_calib->id, adc_calib->flags, adc_calib->adc_groupnr,
635 + adc_calib->field1, adc_calib->field2,
636 + adc_calib->field3, adc_calib->field4);
637 + }
638 + if (count != 7) {
639 + dev_err(&bm->pdev->dev, "PMM sanity check: Did not find "
640 + "all required values (count=%u)", count);
641 + goto check_fail;
642 + }
643 +
644 + return 0;
645 +
646 +value_check_fail:
647 + dev_err(&bm->pdev->dev, "PMM image sanity check failed "
648 + "(id=%02X, field1=%08X, field2=%08X)",
649 + adc_calib->id, adc_calib->field1, adc_calib->field2);
650 +check_fail:
651 + return -EILSEQ;
652 +}
653 +
654 +/* Set the current measure timer that triggers on Tahvo IRQ 7
655 + * An interval of zero disables the timer. */
656 +static void n810bm_set_current_measure_timer(struct n810bm *bm,
657 + u16 millisec_interval)
658 +{
659 + u16 value = millisec_interval;
660 +
661 + if (value <= 0xF905) {
662 + value = ((u64)0x10624DD3 * (u64)(value + 0xF9)) >> 32;
663 + value /= 16;
664 + } else
665 + value = 0xFF;
666 +
667 + tahvo_write(bm, TAHVO_REG_BATCURRTIMER, value & 0xFF);
668 +
669 + tahvo_set(bm, TAHVO_REG_CHGCTL,
670 + TAHVO_REG_CHGCTL_CURTIMRST);
671 + tahvo_clear(bm, TAHVO_REG_CHGCTL,
672 + TAHVO_REG_CHGCTL_CURTIMRST);
673 +
674 + if (millisec_interval)
675 + tahvo_enable_irq(TAHVO_INT_BATCURR);
676 + else
677 + tahvo_disable_irq(TAHVO_INT_BATCURR);
678 +
679 + //TODO also do a software timer for safety.
680 +}
681 +
682 +static void n810bm_enable_current_measure(struct n810bm *bm)
683 +{
684 + WARN_ON(bm->current_measure_enabled < 0);
685 + if (!bm->current_measure_enabled) {
686 + /* Enable the current measurement circuitry */
687 + tahvo_set(bm, TAHVO_REG_CHGCTL,
688 + TAHVO_REG_CHGCTL_CURMEAS);
689 + dev_dbg(&bm->pdev->dev,
690 + "Current measurement circuitry enabled");
691 + }
692 + bm->current_measure_enabled++;
693 +}
694 +
695 +static void n810bm_disable_current_measure(struct n810bm *bm)
696 +{
697 + bm->current_measure_enabled--;
698 + WARN_ON(bm->current_measure_enabled < 0);
699 + if (!bm->current_measure_enabled) {
700 + /* Disable the current measurement circuitry */
701 + tahvo_clear(bm, TAHVO_REG_CHGCTL,
702 + TAHVO_REG_CHGCTL_CURMEAS);
703 + dev_dbg(&bm->pdev->dev,
704 + "Current measurement circuitry disabled");
705 + }
706 +}
707 +
708 +/* Measure the actual battery current. Returns a signed value in mA.
709 + * Does only work, if current measurement was enabled. */
710 +static int n810bm_measure_batt_current(struct n810bm *bm)
711 +{
712 + u16 retval;
713 + int adc = 0, ma, i;
714 +
715 + if (WARN_ON(bm->current_measure_enabled <= 0))
716 + return 0;
717 + for (i = 0; i < 3; i++) {
718 + retval = tahvo_read(bm, TAHVO_REG_BATCURR);
719 + adc += (s16)retval; /* Value is signed */
720 + }
721 + adc /= 3;
722 +
723 + //TODO convert to mA
724 + ma = adc;
725 +
726 + return ma;
727 +}
728 +
729 +/* Requires bm->mutex locked */
730 +static int n810bm_measure_batt_current_async(struct n810bm *bm)
731 +{
732 + int ma;
733 + bool charging = lipocharge_is_charging(&bm->charger);
734 +
735 + n810bm_enable_current_measure(bm);
736 + if (!charging)
737 + WARN_ON(bm->active_current_pwm != 0);
738 + tahvo_maskset(bm, TAHVO_REG_CHGCTL,
739 + TAHVO_REG_CHGCTL_EN |
740 + TAHVO_REG_CHGCTL_PWMOVR |
741 + TAHVO_REG_CHGCTL_PWMOVRZERO,
742 + TAHVO_REG_CHGCTL_EN |
743 + TAHVO_REG_CHGCTL_PWMOVR |
744 + (charging ? 0 : TAHVO_REG_CHGCTL_PWMOVRZERO));
745 + ma = n810bm_measure_batt_current(bm);
746 + tahvo_maskset(bm, TAHVO_REG_CHGCTL,
747 + TAHVO_REG_CHGCTL_EN |
748 + TAHVO_REG_CHGCTL_PWMOVR |
749 + TAHVO_REG_CHGCTL_PWMOVRZERO,
750 + (charging ? TAHVO_REG_CHGCTL_EN : 0));
751 + n810bm_disable_current_measure(bm);
752 +
753 + return ma;
754 +}
755 +
756 +static int adc_sanity_check(struct n810bm *bm, unsigned int channel)
757 +{
758 + int value;
759 +
760 + value = retu_read_adc(&n810bm_retu_device->dev, channel);
761 + if (value < 0) {
762 + dev_err(&bm->pdev->dev, "Failed to read GND ADC channel %u",
763 + channel);
764 + return -EIO;
765 + }
766 + dev_dbg(&bm->pdev->dev,
767 + "GND ADC channel %u sanity check got value: %d",
768 + channel, value);
769 + if (value > 5) {
770 + n810bm_emergency(bm, "GND ADC sanity check failed");
771 + return -EIO;
772 + }
773 +
774 + return 0;
775 +}
776 +
777 +static int n810bm_check_adc_sanity(struct n810bm *bm)
778 +{
779 + int err;
780 +
781 + /* Discard one conversion */
782 + retu_write(bm, RETU_REG_ADCSCR, 0);
783 + retu_read_adc(&n810bm_retu_device->dev, RETU_ADC_GND2);
784 +
785 + err = adc_sanity_check(bm, RETU_ADC_GND2);
786 + if (err)
787 + return err;
788 +
789 + return 0;
790 +}
791 +
792 +/* Measure the battery voltage. Returns the value in mV (or negative value on error). */
793 +static int n810bm_measure_batt_voltage(struct n810bm *bm)
794 +{
795 + int adc;
796 + unsigned int mv;
797 + const unsigned int scale = 1000;
798 +
799 + adc = retu_adc_average(bm, RETU_ADC_BATTVOLT, 5);
800 + if (adc < 0)
801 + return adc;
802 + if (adc <= 0x37)
803 + return 2800;
804 + mv = 2800 + ((adc - 0x37) * (((4200 - 2800) * scale) / (0x236 - 0x37))) / scale;
805 +
806 + //TODO compensate for power consumption
807 + //TODO honor calibration values
808 +
809 + return mv;
810 +}
811 +
812 +/* Measure the charger voltage. Returns the value in mV (or negative value on error). */
813 +static int n810bm_measure_charger_voltage(struct n810bm *bm)
814 +{
815 + int adc;
816 + unsigned int mv;
817 +
818 + adc = retu_adc_average(bm, RETU_ADC_CHGVOLT, 5);
819 + if (adc < 0)
820 + return adc;
821 + //TODO convert to mV
822 + mv = adc;
823 +
824 + return mv;
825 +}
826 +
827 +/* Measure backup battery voltage. Returns the value in mV (or negative value on error). */
828 +static int n810bm_measure_backup_batt_voltage(struct n810bm *bm)
829 +{
830 + int adc;
831 + unsigned int mv;
832 +
833 + adc = retu_adc_average(bm, RETU_ADC_BKUPVOLT, 3);
834 + if (adc < 0)
835 + return adc;
836 + //TODO convert to mV
837 + mv = adc;
838 +
839 + return mv;
840 +}
841 +
842 +/* Measure the battery temperature. Returns the value in K (or negative value on error). */
843 +static int n810bm_measure_batt_temp(struct n810bm *bm)
844 +{
845 + int adc;
846 + unsigned int k;
847 +
848 + adc = retu_adc_average(bm, RETU_ADC_BATTEMP, 3);
849 + if (adc < 0)
850 + return adc;
851 + //TODO convert to K
852 + k = adc;
853 +
854 + return k;
855 +}
856 +
857 +/* Read the battery capacity via BSI pin. */
858 +static enum n810bm_capacity n810bm_read_batt_capacity(struct n810bm *bm)
859 +{
860 + int adc;
861 + const unsigned int hyst = 20;
862 +
863 + adc = retu_adc_average(bm, RETU_ADC_BSI, 5);
864 + if (adc < 0) {
865 + dev_err(&bm->pdev->dev, "Failed to read BSI ADC");
866 + return N810BM_CAP_UNKNOWN;
867 + }
868 +
869 + if (adc >= 0x3B5 - hyst && adc <= 0x3B5 + hyst)
870 + return N810BM_CAP_1500MAH;
871 +
872 + dev_err(&bm->pdev->dev, "Capacity indicator 0x%X unknown", adc);
873 +
874 + return N810BM_CAP_UNKNOWN;
875 +}
876 +
877 +/* Convert a battery voltage (in mV) to percentage. */
878 +static unsigned int n810bm_mvolt2percent(unsigned int mv)
879 +{
880 + const unsigned int minv = 3700;
881 + const unsigned int maxv = 4150;
882 + unsigned int percent;
883 +
884 + mv = clamp(mv, minv, maxv);
885 + percent = (mv - minv) * 100 / (maxv - minv);
886 +
887 + return percent;
888 +}
889 +
890 +static void n810bm_start_charge(struct n810bm *bm)
891 +{
892 + int err;
893 +
894 + WARN_ON(!bm->battery_present);
895 + WARN_ON(!bm->charger_present);
896 +
897 + /* Set PWM to zero */
898 + bm->active_current_pwm = 0;
899 + tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
900 +
901 + /* Charge global enable */
902 + tahvo_maskset(bm, TAHVO_REG_CHGCTL,
903 + TAHVO_REG_CHGCTL_EN |
904 + TAHVO_REG_CHGCTL_PWMOVR |
905 + TAHVO_REG_CHGCTL_PWMOVRZERO,
906 + TAHVO_REG_CHGCTL_EN);
907 +
908 + WARN_ON((int)bm->capacity <= 0);
909 + bm->charger.capacity = bm->capacity;
910 + err = lipocharge_start(&bm->charger);
911 + WARN_ON(err);
912 +
913 + /* Initialize current measurement circuitry */
914 + n810bm_enable_current_measure(bm);
915 + n810bm_set_current_measure_timer(bm, 250);
916 +
917 + dev_info(&bm->pdev->dev, "Charging battery");
918 + n810bm_notify_charger_state(bm);
919 + n810bm_notify_charger_pwm(bm);
920 +}
921 +
922 +static void n810bm_stop_charge(struct n810bm *bm)
923 +{
924 + if (lipocharge_is_charging(&bm->charger)) {
925 + n810bm_set_current_measure_timer(bm, 0);
926 + n810bm_disable_current_measure(bm);
927 + }
928 + lipocharge_stop(&bm->charger);
929 +
930 + /* Set PWM to zero */
931 + bm->active_current_pwm = 0;
932 + tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
933 +
934 + /* Charge global disable */
935 + tahvo_maskset(bm, TAHVO_REG_CHGCTL,
936 + TAHVO_REG_CHGCTL_EN |
937 + TAHVO_REG_CHGCTL_PWMOVR |
938 + TAHVO_REG_CHGCTL_PWMOVRZERO,
939 + 0);
940 +
941 + dev_info(&bm->pdev->dev, "Not charging battery");
942 + n810bm_notify_charger_state(bm);
943 + n810bm_notify_charger_pwm(bm);
944 +}
945 +
946 +/* Periodic check */
947 +static void n810bm_periodic_check_work(struct work_struct *work)
948 +{
949 + struct n810bm *bm = container_of(to_delayed_work(work),
950 + struct n810bm, periodic_check_work);
951 + u16 status;
952 + bool battery_was_present, charger_was_present;
953 + int mv;
954 +
955 + mutex_lock(&bm->mutex);
956 +
957 + status = retu_read(bm, RETU_REG_STATUS);
958 + battery_was_present = bm->battery_present;
959 + charger_was_present = bm->charger_present;
960 + bm->battery_present = !!(status & RETU_REG_STATUS_BATAVAIL);
961 + bm->charger_present = !!(status & RETU_REG_STATUS_CHGPLUG);
962 +
963 + if (bm->battery_present != battery_was_present) {
964 + /* Battery state changed */
965 + if (bm->battery_present) {
966 + bm->capacity = n810bm_read_batt_capacity(bm);
967 + if (bm->capacity == N810BM_CAP_UNKNOWN) {
968 + dev_err(&bm->pdev->dev, "Unknown battery detected");
969 + } else {
970 + dev_info(&bm->pdev->dev, "Detected %u mAh battery",
971 + (unsigned int)bm->capacity);
972 + }
973 + } else {
974 + bm->capacity = N810BM_CAP_NONE;
975 + dev_info(&bm->pdev->dev, "The main battery was removed");
976 + //TODO disable charging
977 + }
978 + }
979 +
980 + if (bm->charger_present != charger_was_present) {
981 + /* Charger state changed */
982 + dev_info(&bm->pdev->dev, "The charger was %s",
983 + bm->charger_present ? "plugged in" : "removed");
984 + n810bm_notify_charger_present(bm);
985 + }
986 +
987 + if ((bm->battery_present && !bm->charger_present) ||
988 + !n810bm_known_battery_present(bm)){
989 + /* We're draining the battery */
990 + mv = n810bm_measure_batt_voltage(bm);
991 + if (mv < 0) {
992 + n810bm_emergency(bm,
993 + "check: Failed to measure voltage");
994 + }
995 + if (mv < N810BM_MIN_VOLTAGE_THRES) {
996 + n810bm_emergency(bm,
997 + "check: Minimum voltage threshold reached");
998 + }
999 + }
1000 +
1001 + if (bm->charger_present && n810bm_known_battery_present(bm)) {
1002 + /* Known battery and charger are connected */
1003 + if (bm->charger_enabled) {
1004 + /* Charger is enabled */
1005 + if (!lipocharge_is_charging(&bm->charger)) {
1006 + //TODO start charging, if battery is below some threshold
1007 + n810bm_start_charge(bm);
1008 + }
1009 + }
1010 + }
1011 +
1012 + if (lipocharge_is_charging(&bm->charger) && !bm->charger_present) {
1013 + /* Charger was unplugged. */
1014 + n810bm_stop_charge(bm);
1015 + }
1016 +
1017 + mutex_unlock(&bm->mutex);
1018 + schedule_delayed_work(&bm->periodic_check_work,
1019 + round_jiffies_relative(N810BM_CHECK_INTERVAL));
1020 +}
1021 +
1022 +/*XXX
1023 +static void n810bm_adc_irq_handler(unsigned long data)
1024 +{
1025 + struct n810bm *bm = (struct n810bm *)data;
1026 +
1027 + retu_ack_irq(RETU_INT_ADCS);
1028 + //TODO
1029 +dev_info(&bm->pdev->dev, "ADC interrupt triggered\n");
1030 +}
1031 +*/
1032 +
1033 +static void n810bm_tahvo_current_measure_work(struct work_struct *work)
1034 +{
1035 + struct n810bm *bm = container_of(work, struct n810bm, currmeas_irq_work);
1036 + int res, ma, mv, temp;
1037 +
1038 + mutex_lock(&bm->mutex);
1039 + if (!lipocharge_is_charging(&bm->charger))
1040 + goto out_unlock;
1041 +
1042 + tahvo_maskset(bm, TAHVO_REG_CHGCTL,
1043 + TAHVO_REG_CHGCTL_PWMOVR |
1044 + TAHVO_REG_CHGCTL_PWMOVRZERO,
1045 + TAHVO_REG_CHGCTL_PWMOVR);
1046 + ma = n810bm_measure_batt_current(bm);
1047 + tahvo_maskset(bm, TAHVO_REG_CHGCTL,
1048 + TAHVO_REG_CHGCTL_PWMOVR |
1049 + TAHVO_REG_CHGCTL_PWMOVRZERO,
1050 + TAHVO_REG_CHGCTL_PWMOVR |
1051 + TAHVO_REG_CHGCTL_PWMOVRZERO);
1052 + msleep(10);
1053 + mv = n810bm_measure_batt_voltage(bm);
1054 + tahvo_maskset(bm, TAHVO_REG_CHGCTL,
1055 + TAHVO_REG_CHGCTL_PWMOVR |
1056 + TAHVO_REG_CHGCTL_PWMOVRZERO,
1057 + 0);
1058 + temp = n810bm_measure_batt_temp(bm);
1059 + if (WARN_ON(mv < 0))
1060 + goto out_unlock;
1061 + if (WARN_ON(temp < 0))
1062 + goto out_unlock;
1063 +
1064 + if (bm->verbose_charge_log) {
1065 + dev_info(&bm->pdev->dev,
1066 + "Battery charge state: %d mV, %d mA (%s)",
1067 + mv, ma,
1068 + (ma <= 0) ? "discharging" : "charging");
1069 + }
1070 + res = lipocharge_update_state(&bm->charger, mv, ma, temp);
1071 + if (res) {
1072 + if (res > 0)
1073 + dev_info(&bm->pdev->dev, "Battery fully charged");
1074 + n810bm_stop_charge(bm);
1075 + }
1076 +out_unlock:
1077 + mutex_unlock(&bm->mutex);
1078 +}
1079 +
1080 +static void n810bm_tahvo_current_measure_irq_handler(unsigned long data)
1081 +{
1082 + struct n810bm *bm = (struct n810bm *)data;
1083 +
1084 + tahvo_ack_irq(TAHVO_INT_BATCURR);
1085 + schedule_work(&bm->currmeas_irq_work);
1086 +}
1087 +
1088 +#define DEFINE_ATTR_NOTIFY(attr_name) \
1089 + void n810bm_notify_##attr_name(struct n810bm *bm) \
1090 + { \
1091 + set_bit(N810BM_NOTIFY_##attr_name, &bm->notify_flags); \
1092 + wmb(); \
1093 + schedule_work(&bm->notify_work); \
1094 + }
1095 +
1096 +#define DEFINE_SHOW_INT_FUNC(name, member) \
1097 + static ssize_t n810bm_attr_##name##_show(struct device *dev, \
1098 + struct device_attribute *attr, \
1099 + char *buf) \
1100 + { \
1101 + struct n810bm *bm = device_to_n810bm(dev); \
1102 + ssize_t count; \
1103 + \
1104 + mutex_lock(&bm->mutex); \
1105 + count = snprintf(buf, PAGE_SIZE, "%d\n", (int)(bm->member)); \
1106 + mutex_unlock(&bm->mutex); \
1107 + \
1108 + return count; \
1109 + }
1110 +
1111 +#define DEFINE_STORE_INT_FUNC(name, member) \
1112 + static ssize_t n810bm_attr_##name##_store(struct device *dev, \
1113 + struct device_attribute *attr,\
1114 + const char *buf, size_t count)\
1115 + { \
1116 + struct n810bm *bm = device_to_n810bm(dev); \
1117 + long val; \
1118 + int err; \
1119 + \
1120 + mutex_lock(&bm->mutex); \
1121 + err = strict_strtol(buf, 0, &val); \
1122 + if (!err) \
1123 + bm->member = (typeof(bm->member))val; \
1124 + mutex_unlock(&bm->mutex); \
1125 + \
1126 + return err ? err : count; \
1127 + }
1128 +
1129 +#define DEFINE_ATTR_SHOW_INT(name, member) \
1130 + DEFINE_SHOW_INT_FUNC(name, member) \
1131 + static DEVICE_ATTR(name, S_IRUGO, \
1132 + n810bm_attr_##name##_show, NULL);
1133 +
1134 +#define DEFINE_ATTR_SHOW_STORE_INT(name, member) \
1135 + DEFINE_SHOW_INT_FUNC(name, member) \
1136 + DEFINE_STORE_INT_FUNC(name, member) \
1137 + static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, \
1138 + n810bm_attr_##name##_show, \
1139 + n810bm_attr_##name##_store);
1140 +
1141 +DEFINE_ATTR_SHOW_INT(battery_present, battery_present);
1142 +DEFINE_ATTR_SHOW_INT(charger_present, charger_present);
1143 +static DEFINE_ATTR_NOTIFY(charger_present);
1144 +DEFINE_ATTR_SHOW_INT(charger_state, charger.state);
1145 +static DEFINE_ATTR_NOTIFY(charger_state);
1146 +DEFINE_ATTR_SHOW_INT(charger_pwm, active_current_pwm);
1147 +static DEFINE_ATTR_NOTIFY(charger_pwm);
1148 +DEFINE_ATTR_SHOW_STORE_INT(charger_enable, charger_enabled);
1149 +DEFINE_ATTR_SHOW_STORE_INT(charger_verbose, verbose_charge_log);
1150 +
1151 +static ssize_t n810bm_attr_battery_level_show(struct device *dev,
1152 + struct device_attribute *attr,
1153 + char *buf)
1154 +{
1155 + struct n810bm *bm = device_to_n810bm(dev);
1156 + ssize_t count = -ENODEV;
1157 + int millivolt;
1158 +
1159 + mutex_lock(&bm->mutex);
1160 + if (!bm->battery_present || lipocharge_is_charging(&bm->charger))
1161 + millivolt = 0;
1162 + else
1163 + millivolt = n810bm_measure_batt_voltage(bm);
1164 + if (millivolt >= 0) {
1165 + count = snprintf(buf, PAGE_SIZE, "%u\n",
1166 + n810bm_mvolt2percent(millivolt));
1167 + }
1168 + mutex_unlock(&bm->mutex);
1169 +
1170 + return count;
1171 +}
1172 +static DEVICE_ATTR(battery_level, S_IRUGO,
1173 + n810bm_attr_battery_level_show, NULL);
1174 +
1175 +static ssize_t n810bm_attr_battery_capacity_show(struct device *dev,
1176 + struct device_attribute *attr,
1177 + char *buf)
1178 +{
1179 + struct n810bm *bm = device_to_n810bm(dev);
1180 + ssize_t count;
1181 + int capacity = 0;
1182 +
1183 + mutex_lock(&bm->mutex);
1184 + if (n810bm_known_battery_present(bm))
1185 + capacity = (int)bm->capacity;
1186 + count = snprintf(buf, PAGE_SIZE, "%d\n", capacity);
1187 + mutex_unlock(&bm->mutex);
1188 +
1189 + return count;
1190 +}
1191 +static DEVICE_ATTR(battery_capacity, S_IRUGO,
1192 + n810bm_attr_battery_capacity_show, NULL);
1193 +
1194 +static ssize_t n810bm_attr_battery_temp_show(struct device *dev,
1195 + struct device_attribute *attr,
1196 + char *buf)
1197 +{
1198 + struct n810bm *bm = device_to_n810bm(dev);
1199 + ssize_t count = -ENODEV;
1200 + int k;
1201 +
1202 + mutex_lock(&bm->mutex);
1203 + k = n810bm_measure_batt_temp(bm);
1204 + if (k >= 0)
1205 + count = snprintf(buf, PAGE_SIZE, "%d\n", k);
1206 + mutex_unlock(&bm->mutex);
1207 +
1208 + return count;
1209 +}
1210 +static DEVICE_ATTR(battery_temp, S_IRUGO,
1211 + n810bm_attr_battery_temp_show, NULL);
1212 +
1213 +static ssize_t n810bm_attr_charger_voltage_show(struct device *dev,
1214 + struct device_attribute *attr,
1215 + char *buf)
1216 +{
1217 + struct n810bm *bm = device_to_n810bm(dev);
1218 + ssize_t count = -ENODEV;
1219 + int mv = 0;
1220 +
1221 + mutex_lock(&bm->mutex);
1222 + if (bm->charger_present)
1223 + mv = n810bm_measure_charger_voltage(bm);
1224 + if (mv >= 0)
1225 + count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
1226 + mutex_unlock(&bm->mutex);
1227 +
1228 + return count;
1229 +}
1230 +static DEVICE_ATTR(charger_voltage, S_IRUGO,
1231 + n810bm_attr_charger_voltage_show, NULL);
1232 +
1233 +static ssize_t n810bm_attr_backup_battery_voltage_show(struct device *dev,
1234 + struct device_attribute *attr,
1235 + char *buf)
1236 +{
1237 + struct n810bm *bm = device_to_n810bm(dev);
1238 + ssize_t count = -ENODEV;
1239 + int mv;
1240 +
1241 + mutex_lock(&bm->mutex);
1242 + mv = n810bm_measure_backup_batt_voltage(bm);
1243 + if (mv >= 0)
1244 + count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
1245 + mutex_unlock(&bm->mutex);
1246 +
1247 + return count;
1248 +}
1249 +static DEVICE_ATTR(backup_battery_voltage, S_IRUGO,
1250 + n810bm_attr_backup_battery_voltage_show, NULL);
1251 +
1252 +static ssize_t n810bm_attr_battery_current_show(struct device *dev,
1253 + struct device_attribute *attr,
1254 + char *buf)
1255 +{
1256 + struct n810bm *bm = device_to_n810bm(dev);
1257 + ssize_t count = -ENODEV;
1258 + int ma = 0;
1259 +
1260 + mutex_lock(&bm->mutex);
1261 + if (bm->battery_present)
1262 + ma = n810bm_measure_batt_current_async(bm);
1263 + count = snprintf(buf, PAGE_SIZE, "%d\n", ma);
1264 + mutex_unlock(&bm->mutex);
1265 +
1266 + return count;
1267 +}
1268 +static DEVICE_ATTR(battery_current, S_IRUGO,
1269 + n810bm_attr_battery_current_show, NULL);
1270 +
1271 +static const struct device_attribute *n810bm_attrs[] = {
1272 + &dev_attr_battery_present,
1273 + &dev_attr_battery_level,
1274 + &dev_attr_battery_current,
1275 + &dev_attr_battery_capacity,
1276 + &dev_attr_battery_temp,
1277 + &dev_attr_backup_battery_voltage,
1278 + &dev_attr_charger_present,
1279 + &dev_attr_charger_state,
1280 + &dev_attr_charger_verbose,
1281 + &dev_attr_charger_voltage,
1282 + &dev_attr_charger_enable,
1283 + &dev_attr_charger_pwm,
1284 +};
1285 +
1286 +static void n810bm_notify_work(struct work_struct *work)
1287 +{
1288 + struct n810bm *bm = container_of(work, struct n810bm, notify_work);
1289 + unsigned long notify_flags;
1290 +
1291 + notify_flags = xchg(&bm->notify_flags, 0);
1292 + mb();
1293 +
1294 +#define do_notify(attr_name) \
1295 + do { \
1296 + if (notify_flags & (1 << N810BM_NOTIFY_##attr_name)) { \
1297 + sysfs_notify(&bm->pdev->dev.kobj, NULL, \
1298 + dev_attr_##attr_name.attr.name); \
1299 + } \
1300 + } while (0)
1301 +
1302 + do_notify(charger_present);
1303 + do_notify(charger_state);
1304 + do_notify(charger_pwm);
1305 +}
1306 +
1307 +static int n810bm_charger_set_current_pwm(struct lipocharge *c,
1308 + unsigned int duty_cycle)
1309 +{
1310 + struct n810bm *bm = container_of(c, struct n810bm, charger);
1311 + int err = -EINVAL;
1312 +
1313 + WARN_ON(!mutex_is_locked(&bm->mutex));
1314 + if (WARN_ON(duty_cycle > 0xFF))
1315 + goto out;
1316 + if (WARN_ON(!bm->charger_enabled))
1317 + goto out;
1318 + if (WARN_ON(!bm->battery_present || !bm->charger_present))
1319 + goto out;
1320 +
1321 + if (duty_cycle != bm->active_current_pwm) {
1322 + bm->active_current_pwm = duty_cycle;
1323 + tahvo_write(bm, TAHVO_REG_CHGCURR, duty_cycle);
1324 + n810bm_notify_charger_pwm(bm);
1325 + }
1326 +
1327 + err = 0;
1328 +out:
1329 +
1330 + return err;
1331 +}
1332 +
1333 +static void n810bm_charger_emergency(struct lipocharge *c)
1334 +{
1335 + struct n810bm *bm = container_of(c, struct n810bm, charger);
1336 +
1337 + n810bm_emergency(bm, "Battery charger fault");
1338 +}
1339 +
1340 +static void n810bm_hw_exit(struct n810bm *bm)
1341 +{
1342 + n810bm_stop_charge(bm);
1343 + retu_write(bm, RETU_REG_ADCSCR, 0);
1344 +}
1345 +
1346 +static int n810bm_hw_init(struct n810bm *bm)
1347 +{
1348 + int err;
1349 +
1350 + err = n810bm_check_adc_sanity(bm);
1351 + if (err)
1352 + return err;
1353 +
1354 + n810bm_stop_charge(bm);
1355 +
1356 + return 0;
1357 +}
1358 +
1359 +static void n810bm_cancel_and_flush_work(struct n810bm *bm)
1360 +{
1361 + cancel_delayed_work_sync(&bm->periodic_check_work);
1362 + cancel_work_sync(&bm->notify_work);
1363 + cancel_work_sync(&bm->currmeas_irq_work);
1364 + flush_scheduled_work();
1365 +}
1366 +
1367 +static int n810bm_device_init(struct n810bm *bm)
1368 +{
1369 + int attr_index;
1370 + int err;
1371 +
1372 + bm->charger.rate = LIPORATE_p6C;
1373 + bm->charger.top_voltage = 4100;
1374 + bm->charger.duty_cycle_max = 0xFF;
1375 + bm->charger.set_current_pwm = n810bm_charger_set_current_pwm;
1376 + bm->charger.emergency = n810bm_charger_emergency;
1377 + lipocharge_init(&bm->charger, &bm->pdev->dev);
1378 +
1379 + err = n810bm_hw_init(bm);
1380 + if (err)
1381 + goto error;
1382 + for (attr_index = 0; attr_index < ARRAY_SIZE(n810bm_attrs); attr_index++) {
1383 + err = device_create_file(&bm->pdev->dev, n810bm_attrs[attr_index]);
1384 + if (err)
1385 + goto err_unwind_attrs;
1386 + }
1387 +/*XXX
1388 + err = retu_request_irq(RETU_INT_ADCS,
1389 + n810bm_adc_irq_handler,
1390 + (unsigned long)bm, "n810bm");
1391 + if (err)
1392 + goto err_unwind_attrs;
1393 +*/
1394 + err = tahvo_request_irq(TAHVO_INT_BATCURR,
1395 + n810bm_tahvo_current_measure_irq_handler,
1396 + (unsigned long)bm, "n810bm");
1397 + if (err)
1398 + goto err_free_retu_irq;
1399 + tahvo_disable_irq(TAHVO_INT_BATCURR);
1400 +
1401 + schedule_delayed_work(&bm->periodic_check_work,
1402 + round_jiffies_relative(N810BM_CHECK_INTERVAL));
1403 +
1404 + bm->initialized = 1;
1405 + dev_info(&bm->pdev->dev, "Battery management initialized");
1406 +
1407 + return 0;
1408 +
1409 +err_free_retu_irq:
1410 +//XXX retu_free_irq(RETU_INT_ADCS);
1411 +err_unwind_attrs:
1412 + for (attr_index--; attr_index >= 0; attr_index--)
1413 + device_remove_file(&bm->pdev->dev, n810bm_attrs[attr_index]);
1414 +/*err_exit:*/
1415 + n810bm_hw_exit(bm);
1416 +error:
1417 + n810bm_cancel_and_flush_work(bm);
1418 +
1419 + return err;
1420 +}
1421 +
1422 +static void n810bm_device_exit(struct n810bm *bm)
1423 +{
1424 + int i;
1425 +
1426 + if (!bm->initialized)
1427 + return;
1428 +
1429 + lipocharge_exit(&bm->charger);
1430 + tahvo_free_irq(TAHVO_INT_BATCURR);
1431 +//XXX retu_free_irq(RETU_INT_ADCS);
1432 + for (i = 0; i < ARRAY_SIZE(n810bm_attrs); i++)
1433 + device_remove_file(&bm->pdev->dev, n810bm_attrs[i]);
1434 +
1435 + n810bm_cancel_and_flush_work(bm);
1436 +
1437 + n810bm_hw_exit(bm);
1438 +
1439 + bm->initialized = 0;
1440 +}
1441 +
1442 +static void n810bm_pmm_block_found(const struct firmware *fw, void *context)
1443 +{
1444 + struct n810bm *bm = context;
1445 + int err;
1446 +
1447 + if (!fw) {
1448 + dev_err(&bm->pdev->dev,
1449 + "CAL PMM block image file not found");
1450 + goto err_release;
1451 + }
1452 + if (fw->size != N810BM_PMM_BLOCK_SIZE ||
1453 + memcmp(fw->data, "BME-PMM-BLOCK01", 15) != 0) {
1454 + dev_err(&bm->pdev->dev,
1455 + "CAL PMM block image file has an invalid format");
1456 + goto err_release;
1457 + }
1458 +
1459 + err = n810bm_parse_pmm_block(bm, fw);
1460 + if (err)
1461 + goto err_release;
1462 + release_firmware(fw);
1463 +
1464 + err = n810bm_device_init(bm);
1465 + if (err) {
1466 + dev_err(&bm->pdev->dev,
1467 + "Failed to initialized battery management (%d)", err);
1468 + goto error;
1469 + }
1470 +
1471 + return;
1472 +err_release:
1473 + release_firmware(fw);
1474 +error:
1475 + return;
1476 +}
1477 +
1478 +static int __devinit n810bm_probe(void)
1479 +{
1480 + struct n810bm *bm;
1481 + int err;
1482 +
1483 + if (!n810bm_retu_device || !n810bm_tahvo_device)
1484 + return 0;
1485 +
1486 + bm = kzalloc(sizeof(*bm), GFP_KERNEL);
1487 + if (!bm)
1488 + return -ENOMEM;
1489 + bm->pdev = n810bm_retu_device;
1490 + platform_set_drvdata(n810bm_retu_device, bm);
1491 + platform_set_drvdata(n810bm_tahvo_device, bm);
1492 + mutex_init(&bm->mutex);
1493 + INIT_DELAYED_WORK(&bm->periodic_check_work, n810bm_periodic_check_work);
1494 + INIT_WORK(&bm->notify_work, n810bm_notify_work);
1495 + INIT_WORK(&bm->currmeas_irq_work, n810bm_tahvo_current_measure_work);
1496 +
1497 + dev_info(&bm->pdev->dev, "Requesting CAL BME PMM block firmware file "
1498 + N810BM_PMM_BLOCK_FILENAME);
1499 + err = request_firmware_nowait(THIS_MODULE, 1,
1500 + N810BM_PMM_BLOCK_FILENAME,
1501 + &bm->pdev->dev, GFP_KERNEL,
1502 + bm, n810bm_pmm_block_found);
1503 + if (err) {
1504 + dev_err(&bm->pdev->dev,
1505 + "Failed to request CAL PMM block image file (%d)", err);
1506 + goto err_free;
1507 + }
1508 +
1509 + return 0;
1510 +
1511 +err_free:
1512 + kfree(bm);
1513 +
1514 + return err;
1515 +}
1516 +
1517 +static void __devexit n810bm_remove(void)
1518 +{
1519 + struct n810bm *bm;
1520 +
1521 + if (!n810bm_retu_device || !n810bm_tahvo_device)
1522 + return;
1523 + bm = platform_get_drvdata(n810bm_retu_device);
1524 +
1525 + n810bm_device_exit(bm);
1526 +
1527 + kfree(bm);
1528 + platform_set_drvdata(n810bm_retu_device, NULL);
1529 + platform_set_drvdata(n810bm_tahvo_device, NULL);
1530 +}
1531 +
1532 +static int __devinit n810bm_retu_probe(struct platform_device *pdev)
1533 +{
1534 + n810bm_retu_device = pdev;
1535 + return n810bm_probe();
1536 +}
1537 +
1538 +static int __devexit n810bm_retu_remove(struct platform_device *pdev)
1539 +{
1540 + n810bm_remove();
1541 + n810bm_retu_device = NULL;
1542 + return 0;
1543 +}
1544 +
1545 +static int __devinit n810bm_tahvo_probe(struct platform_device *pdev)
1546 +{
1547 + n810bm_tahvo_device = pdev;
1548 + return n810bm_probe();
1549 +}
1550 +
1551 +static int __devexit n810bm_tahvo_remove(struct platform_device *pdev)
1552 +{
1553 + n810bm_remove();
1554 + n810bm_tahvo_device = NULL;
1555 + return 0;
1556 +}
1557 +
1558 +static struct platform_driver n810bm_retu_driver = {
1559 + .remove = __devexit_p(n810bm_retu_remove),
1560 + .driver = {
1561 + .name = "retu-n810bm",
1562 + }
1563 +};
1564 +
1565 +static struct platform_driver n810bm_tahvo_driver = {
1566 + .remove = __devexit_p(n810bm_tahvo_remove),
1567 + .driver = {
1568 + .name = "tahvo-n810bm",
1569 + }
1570 +};
1571 +
1572 +/* FIXME: for now alloc the device here... */
1573 +static struct platform_device n810bm_tahvo_dev = {
1574 + .name = "tahvo-n810bm",
1575 + .id = -1,
1576 +};
1577 +
1578 +static int __init n810bm_modinit(void)
1579 +{
1580 + int err;
1581 +
1582 + //FIXME
1583 + err = platform_device_register(&n810bm_tahvo_dev);
1584 + if (err)
1585 + return err;
1586 +
1587 + err = platform_driver_probe(&n810bm_retu_driver, n810bm_retu_probe);
1588 + if (err)
1589 + return err;
1590 + err = platform_driver_probe(&n810bm_tahvo_driver, n810bm_tahvo_probe);
1591 + if (err) {
1592 + platform_driver_unregister(&n810bm_retu_driver);
1593 + return err;
1594 + }
1595 +
1596 + return 0;
1597 +}
1598 +module_init(n810bm_modinit);
1599 +
1600 +static void __exit n810bm_modexit(void)
1601 +{
1602 + //FIXME
1603 + platform_device_unregister(&n810bm_tahvo_dev);
1604 +
1605 + platform_driver_unregister(&n810bm_tahvo_driver);
1606 + platform_driver_unregister(&n810bm_retu_driver);
1607 +}
1608 +module_exit(n810bm_modexit);
1609 +
1610 +MODULE_DESCRIPTION("Nokia n810 battery management");
1611 +MODULE_FIRMWARE(N810BM_PMM_BLOCK_FILENAME);
1612 +MODULE_LICENSE("GPL");
1613 +MODULE_AUTHOR("Michael Buesch");
1614 --- /dev/null
1615 +++ b/drivers/cbus/lipocharge.c
1616 @@ -0,0 +1,183 @@
1617 +/*
1618 + * Generic LIPO battery charger
1619 + *
1620 + * Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
1621 + *
1622 + * This program is free software; you can redistribute it and/or
1623 + * modify it under the terms of the GNU General Public License
1624 + * as published by the Free Software Foundation; either version 2
1625 + * of the License, or (at your option) any later version.
1626 + *
1627 + * This program is distributed in the hope that it will be useful,
1628 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
1629 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
1630 + * GNU General Public License for more details.
1631 + */
1632 +
1633 +#define DEBUG
1634 +
1635 +#include "lipocharge.h"
1636 +
1637 +#include <linux/slab.h>
1638 +
1639 +
1640 +/* Hysteresis constants */
1641 +#define CURRENT_HYST 30 /* mA */
1642 +#define VOLTAGE_HYST 10 /* mV */
1643 +
1644 +/* Threshold constants */
1645 +#define FINISH_CURRENT_PERCENT 3
1646 +
1647 +
1648 +/* Returns the requested first-stage charge current in mA */
1649 +static inline unsigned int get_stage1_charge_current(struct lipocharge *c)
1650 +{
1651 + /* current = (capacity * C) */
1652 + return c->capacity * c->rate / 1000;
1653 +}
1654 +
1655 +void lipocharge_init(struct lipocharge *c, struct device *dev)
1656 +{
1657 + c->dev = dev;
1658 + c->state = LIPO_IDLE;
1659 +}
1660 +
1661 +void lipocharge_exit(struct lipocharge *c)
1662 +{
1663 + c->state = LIPO_IDLE;
1664 +}
1665 +
1666 +int lipocharge_start(struct lipocharge *c)
1667 +{
1668 + int err;
1669 +
1670 + if (c->state != LIPO_IDLE)
1671 + return -EBUSY;
1672 + if (!c->set_current_pwm || !c->emergency)
1673 + return -EINVAL;
1674 + if (!c->top_voltage || c->top_voltage > 4200)
1675 + return -EINVAL;
1676 +
1677 + c->active_duty_cycle = 0;
1678 + err = c->set_current_pwm(c, c->active_duty_cycle);
1679 + if (err)
1680 + return err;
1681 + c->state = LIPO_FIRST_STAGE;
1682 +
1683 + return 0;
1684 +}
1685 +
1686 +void lipocharge_stop(struct lipocharge *c)
1687 +{
1688 + if (c->state == LIPO_IDLE)
1689 + return;
1690 + c->state = LIPO_IDLE;
1691 +}
1692 +
1693 +static int lipocharge_increase_current(struct lipocharge *c,
1694 + unsigned int inc_permille)
1695 +{
1696 + int old_pwm, new_pwm;
1697 +
1698 + if (c->active_duty_cycle >= c->duty_cycle_max)
1699 + return 0;
1700 +
1701 + old_pwm = c->active_duty_cycle;
1702 + new_pwm = old_pwm + (c->duty_cycle_max * inc_permille / 1000);
1703 + new_pwm = min(new_pwm, (int)c->duty_cycle_max);
1704 + c->active_duty_cycle = new_pwm;
1705 +
1706 + dev_dbg(c->dev, "lipo: Increasing duty_cycle by "
1707 + "%u permille (0x%02X -> 0x%02X)",
1708 + inc_permille, old_pwm, new_pwm);
1709 +
1710 + return c->set_current_pwm(c, c->active_duty_cycle);
1711 +}
1712 +
1713 +static int lipocharge_decrease_current(struct lipocharge *c,
1714 + unsigned int dec_permille)
1715 +{
1716 + int old_pwm, new_pwm;
1717 +
1718 + if (c->active_duty_cycle <= 0)
1719 + return 0;
1720 +
1721 + old_pwm = c->active_duty_cycle;
1722 + new_pwm = old_pwm - (c->duty_cycle_max * dec_permille / 1000);
1723 + new_pwm = max(0, new_pwm);
1724 + c->active_duty_cycle = new_pwm;
1725 +
1726 + dev_dbg(c->dev, "lipo: Decreasing duty_cycle by "
1727 + "%u permille (0x%02X -> 0x%02X)",
1728 + dec_permille, old_pwm, new_pwm);
1729 +
1730 + return c->set_current_pwm(c, c->active_duty_cycle);
1731 +}
1732 +
1733 +/** lipocharge_update_state - Update the charge state
1734 + * @c: The context.
1735 + * @voltage_mV: The measured battery voltage.
1736 + * @current_mA: The measured charge current.
1737 + * negative -> drain.
1738 + * positive -> charge.
1739 + * @temp_K: Battery temperature in K.
1740 + *
1741 + * Returns 0 on success, -1 on error.
1742 + * Returns 1, if the charging process is finished.
1743 + */
1744 +int lipocharge_update_state(struct lipocharge *c,
1745 + unsigned int voltage_mV,
1746 + int current_mA,
1747 + unsigned int temp_K)
1748 +{
1749 + int requested_current, current_diff;
1750 + int err;
1751 + unsigned int permille;
1752 +
1753 + //TODO temp
1754 +
1755 +restart:
1756 + switch (c->state) {
1757 + case LIPO_IDLE:
1758 + dev_err(c->dev, "%s: called while idle", __func__);
1759 + return -EINVAL;
1760 + case LIPO_FIRST_STAGE: /* Constant current */
1761 +//printk("GOT %u %d %u\n", voltage_mV, current_mA, temp_K);
1762 + if (voltage_mV >= c->top_voltage) {
1763 + /* Float voltage reached.
1764 + * Switch charger mode to "constant current" */
1765 + c->state = LIPO_SECOND_STAGE;
1766 + dev_dbg(c->dev, "Switched to second charging stage.");
1767 + goto restart;
1768 + }
1769 + /* Float voltage not reached, yet.
1770 + * Try to get the requested constant current. */
1771 + requested_current = get_stage1_charge_current(c);
1772 + if (current_mA < 0)
1773 + current_mA = 0;
1774 + current_diff = requested_current - current_mA;
1775 + if (abs(requested_current - current_mA) > CURRENT_HYST) {
1776 + if (current_diff > 0) {
1777 + /* Increase current */
1778 + permille = current_diff * 1000 / requested_current;
1779 + permille /= 2;
1780 + err = lipocharge_increase_current(c, permille);
1781 + if (err)
1782 + return err;
1783 + } else {
1784 + /* Decrease current */
1785 + permille = (-current_diff) * 1000 / requested_current;
1786 + permille /= 2;
1787 + err = lipocharge_decrease_current(c, permille);
1788 + if (err)
1789 + return err;
1790 + }
1791 + }
1792 + break;
1793 + case LIPO_SECOND_STAGE: /* Constant voltage */
1794 + //TODO
1795 + break;
1796 + }
1797 +
1798 + return 0;
1799 +}
1800 --- /dev/null
1801 +++ b/drivers/cbus/lipocharge.h
1802 @@ -0,0 +1,60 @@
1803 +#ifndef LIPOCHARGE_H_
1804 +#define LIPOCHARGE_H_
1805 +
1806 +#include <linux/types.h>
1807 +#include <linux/device.h>
1808 +
1809 +
1810 +#define LIPORATE(a,b) (((a) * 1000) + ((b) * 100))
1811 +#define LIPORATE_p6C LIPORATE(0,6) /* 0.6C */
1812 +
1813 +enum lipocharge_state {
1814 + LIPO_IDLE = 0, /* Not charging */
1815 + LIPO_FIRST_STAGE, /* Charging: constant current */
1816 + LIPO_SECOND_STAGE, /* Charging: constant voltage */
1817 +};
1818 +
1819 +/** struct lipocharge - A generic LIPO charger
1820 + *
1821 + * @capacity: Battery capacity in mAh.
1822 + * @rate: Charge rate.
1823 + * @top_voltage: Fully charged voltage, in mV.
1824 + * @duty_cycle_max: Max value for duty_cycle.
1825 + *
1826 + * @set_charge_current: Set the charge current PWM duty cycle.
1827 + * @emergency: Something went wrong. Force shutdown.
1828 + */
1829 +struct lipocharge {
1830 + unsigned int capacity;
1831 + unsigned int rate;
1832 + unsigned int top_voltage;
1833 + unsigned int duty_cycle_max;
1834 +
1835 + int (*set_current_pwm)(struct lipocharge *c, unsigned int duty_cycle);
1836 + void (*emergency)(struct lipocharge *c);
1837 +
1838 + /* internal */
1839 + struct device *dev;
1840 + enum lipocharge_state state;
1841 + unsigned int active_duty_cycle;
1842 +
1843 + //TODO implement timer to cut power after maximum charge time.
1844 +};
1845 +
1846 +void lipocharge_init(struct lipocharge *c, struct device *dev);
1847 +void lipocharge_exit(struct lipocharge *c);
1848 +
1849 +int lipocharge_start(struct lipocharge *c);
1850 +void lipocharge_stop(struct lipocharge *c);
1851 +
1852 +int lipocharge_update_state(struct lipocharge *c,
1853 + unsigned int voltage_mV,
1854 + int current_mA,
1855 + unsigned int temp_K);
1856 +
1857 +static inline bool lipocharge_is_charging(struct lipocharge *c)
1858 +{
1859 + return (c->state != LIPO_IDLE);
1860 +}
1861 +
1862 +#endif /* LIPOCHARGE_H_ */
1863 --- a/drivers/cbus/cbus.c
1864 +++ b/drivers/cbus/cbus.c
1865 @@ -35,6 +35,7 @@
1866 #include <linux/platform_device.h>
1867
1868 #include <plat/cbus.h>
1869 +#include <linux/reboot.h>
1870
1871 #include "cbus.h"
1872
1873 @@ -323,6 +324,13 @@ static void __exit cbus_bus_exit(void)
1874 }
1875 module_exit(cbus_bus_exit);
1876
1877 +void cbus_emergency(void)
1878 +{
1879 + machine_power_off();
1880 + panic("cbus: Failed to halt machine in emergency state\n");
1881 +}
1882 +EXPORT_SYMBOL(cbus_emergency);
1883 +
1884 MODULE_DESCRIPTION("CBUS serial protocol");
1885 MODULE_LICENSE("GPL");
1886 MODULE_AUTHOR("Juha Yrjölä");
1887 --- a/drivers/cbus/cbus.h
1888 +++ b/drivers/cbus/cbus.h
1889 @@ -26,4 +26,6 @@
1890 extern int cbus_read_reg(unsigned dev, unsigned reg);
1891 extern int cbus_write_reg(unsigned dev, unsigned reg, unsigned val);
1892
1893 +NORET_TYPE void cbus_emergency(void) ATTRIB_NORET;
1894 +
1895 #endif /* __DRIVERS_CBUS_CBUS_H */
1896 --- a/drivers/cbus/retu.c
1897 +++ b/drivers/cbus/retu.c
1898 @@ -425,6 +425,11 @@ static int retu_allocate_children(struct
1899 if (!child)
1900 return -ENOMEM;
1901
1902 + child = retu_allocate_child("retu-n810bm", parent, irq_base,
1903 + RETU_INT_ADCS, -1, 1);
1904 + if (!child)
1905 + return -ENOMEM;
1906 +
1907 return 0;
1908 }
1909
1910 --- a/drivers/cbus/tahvo.c
1911 +++ b/drivers/cbus/tahvo.c
1912 @@ -54,6 +54,7 @@ static int tahvo_is_betty;
1913
1914 static struct tasklet_struct tahvo_tasklet;
1915 spinlock_t tahvo_lock = SPIN_LOCK_UNLOCKED;
1916 +EXPORT_SYMBOL(tahvo_lock);
1917
1918 struct tahvo_irq_handler_desc {
1919 int (*func)(unsigned long);
1920 @@ -115,6 +116,7 @@ void tahvo_set_clear_reg_bits(unsigned r
1921 tahvo_write_reg(reg, w);
1922 spin_unlock_irqrestore(&tahvo_lock, flags);
1923 }
1924 +EXPORT_SYMBOL(tahvo_set_clear_reg_bits);
1925
1926 /*
1927 * Disable given TAHVO interrupt
Personal OpenWRT clone
This page took 0.123639 seconds and 5 git commands to generate.