target/linux/lantiq/patches-3.2/206-machtypes.patch

   1 --- a/arch/mips/lantiq/machtypes.h
   2 +++ b/arch/mips/lantiq/machtypes.h
   3 @@ -20,6 +20,36 @@ enum lantiq_mach_type {
   4         LANTIQ_MACH_EASY98000,          /* Falcon Eval Board, NOR Flash */
   5         LANTIQ_MACH_EASY98000SF,        /* Falcon Eval Board, Serial Flash */
   6         LANTIQ_MACH_EASY98000NAND,      /* Falcon Eval Board, NAND Flash */
   7 +       LANTIQ_MACH_EASY98020,          /* EASY98020 Eval Board */
   8 +       LANTIQ_MACH_EASY98020_1LAN,     /* EASY98020 Eval Board (1 LAN port) */
   9 +       LANTIQ_MACH_EASY98020_2LAN,     /* EASY98020 Eval Board (2 LAN port) */
  10 +       LANTIQ_MACH_95C3AM1,            /* 95C3AM1 Eval Board */
  11 +
  12 +       /* Arcadyan */
  13 +       LANTIQ_MACH_ARV3527P,           /* Arcor easybox a401 */
  14 +       LANTIQ_MACH_ARV4510PW,          /* Wippies Homebox */
  15 +       LANTIQ_MACH_ARV4518PW,          /* Airties WAV-221, SMC-7908A-ISP */
  16 +       LANTIQ_MACH_ARV4519PW,          /* Vodafone, Pirelli */
  17 +       LANTIQ_MACH_ARV4520PW,          /* Airties WAV-281, Arcor EasyboxA800 */
  18 +       LANTIQ_MACH_ARV452CPW,          /* Arcor EasyboxA801 */
  19 +       LANTIQ_MACH_ARV4525PW,          /* Speedport W502V */
  20 +       LANTIQ_MACH_ARV7525PW,          /* Speedport W303V */
  21 +       LANTIQ_MACH_ARV752DPW,          /* Arcor easybox a802 */
  22 +       LANTIQ_MACH_ARV752DPW22,        /* Arcor easybox a803 */
  23 +       LANTIQ_MACH_ARV7518PW,          /* ASTORIA */
  24 +
  25 +       /* Netgear */
  26 +       LANTIQ_MACH_DGN3500B,           /* Netgear DGN3500 */
  27 +
  28 +       /* FRITZ!BOX */
  29 +       LANTIQ_MACH_FRITZ3370,          /* FRITZ!BOX 3370 vdsl cpe */
  30 +       LANTIQ_MACH_FRITZ7320,          /* FRITZ!BOX 7320 1&1 homeserver */
  31 +
  32 +       /* Gigaset */
  33 +       LANTIQ_MACH_GIGASX76X,          /* Gigaset SX76x */
  34 +
  35 +       /* Buffalo */
  36 +       LANTIQ_MACH_WBMR,               /* WBMR-HP-G300H */
  37  };
  38
  39  #endif
  40 --- a/arch/mips/lantiq/xway/Kconfig
  41 +++ b/arch/mips/lantiq/xway/Kconfig
  42 @@ -6,6 +6,30 @@ config LANTIQ_MACH_EASY50712
  43         bool "Easy50712 - Danube"
  44         default y
  45
  46 +config LANTIQ_MACH_ARV
  47 +       bool "ARV"
  48 +       default y
  49 +
  50 +config LANTIQ_MACH_NETGEAR
  51 +       bool "Netgear"
  52 +       default y
  53 +
  54 +config LANTIQ_MACH_GIGASX76X
  55 +       bool "GIGASX76X"
  56 +       default y
  57 +
  58 +config LANTIQ_MACH_WBMR
  59 +       bool "WBMR-HP-G300H"
  60 +       default y
  61 +
  62 +config LANTIQ_MACH_FRITZ_VR9
  63 +       bool "FRITZ3370"
  64 +       default y
  65 +
  66 +config LANTIQ_MACH_FRITZ_AR9
  67 +       bool "FRITZ7320"
  68 +       default y
  69 +
  70  endmenu
  71
  72  choice
  73 --- a/arch/mips/lantiq/xway/Makefile
  74 +++ b/arch/mips/lantiq/xway/Makefile
  75 @@ -2,3 +2,9 @@ obj-y := sysctrl.o reset.o gpio.o gpio_s
  76
  77  obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
  78  obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
  79 +obj-$(CONFIG_LANTIQ_MACH_ARV) += mach-arv.o
  80 +obj-$(CONFIG_LANTIQ_MACH_FRITZ_AR9) += mach-fritz_ar9.o
  81 +obj-$(CONFIG_LANTIQ_MACH_FRITZ_VR9) += mach-fritz_vr9.o
  82 +obj-$(CONFIG_LANTIQ_MACH_GIGASX76X) += mach-gigasx76x.o
  83 +obj-$(CONFIG_LANTIQ_MACH_NETGEAR) += mach-netgear.o
  84 +obj-$(CONFIG_LANTIQ_MACH_WBMR) += mach-wbmr.o
  85 --- a/arch/mips/lantiq/falcon/Kconfig
  86 +++ b/arch/mips/lantiq/falcon/Kconfig
  87 @@ -6,6 +6,14 @@ config LANTIQ_MACH_EASY98000
  88         bool "Easy98000"
  89         default y
  90
  91 +config LANTIQ_MACH_EASY98020
  92 +       bool "Easy98020"
  93 +       default y
  94 +
  95 +config LANTIQ_MACH_95C3AM1
  96 +       bool "95C3AM1"
  97 +       default y
  98 +
  99  endmenu
 100
 101  endif
 102 --- a/arch/mips/lantiq/falcon/Makefile
 103 +++ b/arch/mips/lantiq/falcon/Makefile
 104 @@ -1,2 +1,6 @@
 105  obj-y := prom.o reset.o sysctrl.o devices.o gpio.o
 106 +obj-$(CONFIG_LANTIQ_MACH_EASY98000) += addon-easy98000.o
 107 +obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o
 108  obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
 109 +obj-$(CONFIG_LANTIQ_MACH_EASY98020) += mach-easy98020.o
 110 +obj-$(CONFIG_LANTIQ_MACH_95C3AM1)   += mach-95C3AM1.o
 111 --- a/arch/mips/lantiq/falcon/mach-easy98000.c
 112 +++ b/arch/mips/lantiq/falcon/mach-easy98000.c
 113 @@ -1,23 +1,38 @@
 114 -/*
 115 - *  This program is free software; you can redistribute it and/or modify it
 116 - *  under the terms of the GNU General Public License version 2 as published
 117 - *  by the Free Software Foundation.
 118 - *
 119 - *  Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
 120 - *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
 121 - */
 122 -
 123 +#include <linux/init.h>
 124  #include <linux/platform_device.h>
 125 +#include <linux/leds.h>
 126 +#include <linux/gpio.h>
 127 +#include <linux/gpio_buttons.h>
 128 +#include <linux/etherdevice.h>
 129 +#include <linux/mtd/mtd.h>
 130  #include <linux/mtd/partitions.h>
 131 +#include <linux/mtd/physmap.h>
 132 +#include <linux/input.h>
 133 +#include <linux/interrupt.h>
 134 +#include <linux/dm9000.h>
 135 +#include <linux/i2c.h>
 136 +#include <linux/i2c-gpio.h>
 137  #include <linux/spi/spi.h>
 138  #include <linux/spi/spi_gpio.h>
 139  #include <linux/spi/eeprom.h>
 140 +#include <falcon/lantiq_soc.h>
 141
 142  #include "../machtypes.h"
 143
 144  #include "devices.h"
 145 +#include "dev-leds-gpio.h"
 146 +
 147 +#define EASY98000_GPIO_LED_0 9
 148 +#define EASY98000_GPIO_LED_1 10
 149 +#define EASY98000_GPIO_LED_2 11
 150 +#define EASY98000_GPIO_LED_3 12
 151 +#define EASY98000_GPIO_LED_4 13
 152 +#define EASY98000_GPIO_LED_5 14
 153
 154 -static struct mtd_partition easy98000_nor_partitions[] = {
 155 +extern unsigned char ltq_ethaddr[6];
 156 +
 157 +static struct mtd_partition easy98000_nor_partitions[] =
 158 +{
 159         {
 160                 .name   = "uboot",
 161                 .offset = 0x0,
 162 @@ -35,7 +50,7 @@ static struct mtd_partition easy98000_no
 163         },
 164  };
 165
 166 -struct physmap_flash_data easy98000_nor_flash_data = {
 167 +static struct physmap_flash_data easy98000_nor_flash_data = {
 168         .nr_parts       = ARRAY_SIZE(easy98000_nor_partitions),
 169         .parts          = easy98000_nor_partitions,
 170  };
 171 @@ -55,12 +70,105 @@ static struct spi_board_info easy98000_s
 172         .platform_data          = &easy98000_spi_flash_platform_data
 173  };
 174
 175 +static struct gpio_led easy98000_leds_gpio[] __initdata = {
 176 +       {
 177 +               .name           = "easy98000:green:0",
 178 +               .gpio           = EASY98000_GPIO_LED_0,
 179 +               .active_low     = 0,
 180 +       }, {
 181 +               .name           = "easy98000:green:1",
 182 +               .gpio           = EASY98000_GPIO_LED_1,
 183 +               .active_low     = 0,
 184 +       }, {
 185 +               .name           = "easy98000:green:2",
 186 +               .gpio           = EASY98000_GPIO_LED_2,
 187 +               .active_low     = 0,
 188 +       }, {
 189 +               .name           = "easy98000:green:3",
 190 +               .gpio           = EASY98000_GPIO_LED_3,
 191 +               .active_low     = 0,
 192 +       }, {
 193 +               .name           = "easy98000:green:4",
 194 +               .gpio           = EASY98000_GPIO_LED_4,
 195 +               .active_low     = 0,
 196 +       }, {
 197 +               .name           = "easy98000:green:5",
 198 +               .gpio           = EASY98000_GPIO_LED_5,
 199 +               .active_low     = 0,
 200 +       }
 201 +};
 202 +
 203 +#define CONFIG_DM9000_BASE             0x14000000
 204 +#define DM9000_IO                      (CONFIG_DM9000_BASE + 3)
 205 +#define DM9000_DATA                    (CONFIG_DM9000_BASE + 1)
 206 +
 207 +static struct dm9000_plat_data dm9000_plat_data = {
 208 +       .flags = DM9000_PLATF_8BITONLY,
 209 +       //.dev_addr = { }, /* possibility to provide an ethernet address for the chip */
 210 +};
 211 +
 212 +static struct resource dm9000_resources[] = {
 213 +       MEM_RES("dm9000_io", DM9000_IO, DM9000_IO),
 214 +       MEM_RES("dm9000_data", DM9000_DATA, DM9000_DATA),
 215 +       [2] = {
 216 +               /* with irq (210 -> gpio 110) the driver is very unreliable */
 217 +               .start  = -1,           /* use polling */
 218 +               .end    = -1,
 219 +               .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 220 +       },
 221 +};
 222 +
 223 +static struct platform_device dm9000_platform = {
 224 +       .name = "dm9000",
 225 +       .id = 0,
 226 +       .num_resources  = ARRAY_SIZE(dm9000_resources),
 227 +       .resource       = dm9000_resources,
 228 +       .dev = {
 229 +               .platform_data = (void *) &dm9000_plat_data,
 230 +       }
 231 +};
 232 +
 233 +extern int easy98000_addon_has_dm9000(void);
 234 +static void __init register_davicom(void)
 235 +{
 236 +       if (!easy98000_addon_has_dm9000())
 237 +               return;
 238 +
 239 +       if (!is_valid_ether_addr(ltq_ethaddr))
 240 +               random_ether_addr(dm9000_plat_data.dev_addr);
 241 +       else {
 242 +               memcpy(dm9000_plat_data.dev_addr, ltq_ethaddr, 6);
 243 +               /* change to "Locally Administered Address" */
 244 +               dm9000_plat_data.dev_addr[0] |= 0x2;
 245 +       }
 246 +       platform_device_register(&dm9000_platform);
 247 +}
 248 +
 249 +static struct i2c_gpio_platform_data easy98000_i2c_gpio_data = {
 250 +       .sda_pin        = 107,
 251 +       .scl_pin        = 108,
 252 +};
 253 +
 254 +static struct platform_device easy98000_i2c_gpio_device = {
 255 +       .name           = "i2c-gpio",
 256 +       .id             = 0,
 257 +       .dev = {
 258 +               .platform_data  = &easy98000_i2c_gpio_data,
 259 +       }
 260 +};
 261 +
 262 +void __init register_easy98000_cpld(void)
 263 +{
 264 +       platform_device_register_simple("easy98000_cpld_led", 0, NULL, 0);
 265 +       platform_device_register_simple("easy98000_addon", 0, NULL, 0);
 266 +}
 267 +
 268  /* setup gpio based spi bus/device for access to the eeprom on the board */
 269 -#define SPI_GPIO_MRST          102
 270 -#define SPI_GPIO_MTSR          103
 271 -#define SPI_GPIO_CLK           104
 272 -#define SPI_GPIO_CS0           105
 273 -#define SPI_GPIO_CS1           106
 274 +#define SPI_GPIO_MRST  102
 275 +#define SPI_GPIO_MTSR  103
 276 +#define SPI_GPIO_CLK   104
 277 +#define SPI_GPIO_CS0   105
 278 +#define SPI_GPIO_CS1   106
 279  #define SPI_GPIO_BUS_NUM       1
 280
 281  static struct spi_gpio_platform_data easy98000_spi_gpio_data = {
 282 @@ -94,11 +202,22 @@ static struct spi_board_info easy98000_s
 283  };
 284
 285  static void __init
 286 -easy98000_init_common(void)
 287 +easy98000_spi_gpio_init(void)
 288  {
 289         spi_register_board_info(&easy98000_spi_gpio_devices, 1);
 290         platform_device_register(&easy98000_spi_gpio_device);
 291 +}
 292 +
 293 +static void __init
 294 +easy98000_init_common(void)
 295 +{
 296         falcon_register_i2c();
 297 +       platform_device_register(&easy98000_i2c_gpio_device);
 298 +       register_davicom();
 299 +       ltq_add_device_leds_gpio(-1, ARRAY_SIZE(easy98000_leds_gpio),
 300 +               easy98000_leds_gpio);
 301 +       register_easy98000_cpld();
 302 +       easy98000_spi_gpio_init();
 303  }
 304
 305  static void __init