package/wpa_supplicant/files/config.mips

   1 # Driver interface for Host AP driver
   2 #CONFIG_DRIVER_HOSTAP=y
   3
   4 # Driver interface for Agere driver
   5 #CONFIG_DRIVER_HERMES=y
   6 # Change include directories to match with the local setup
   7 #CFLAGS += -I../../hcf -I../../include -I../../include/hcf
   8 #CFLAGS += -I../../include/wireless
   9
  10 # Driver interface for madwifi driver
  11 #CONFIG_DRIVER_MADWIFI=y
  12 # Change include directories to match with the local setup
  13 #CFLAGS += -I../madwifi/wpa
  14
  15 # Driver interface for Prism54 driver
  16 # (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
  17 # for developers only)
  18 #CONFIG_DRIVER_PRISM54=y
  19
  20 # Driver interface for ndiswrapper
  21 #CONFIG_DRIVER_NDISWRAPPER=y
  22
  23 # Driver interface for Atmel driver
  24 #CONFIG_DRIVER_ATMEL=y
  25
  26 # Driver interface for Broadcom driver
  27 # CONFIG_DRIVER_BROADCOM=y
  28 # Example path for wlioctl.h; change to match your configuration
  29 # CFLAGS += -I../nvram/include
  30
  31 # Driver interface for Intel ipw2100/2200 driver
  32 #CONFIG_DRIVER_IPW=y
  33
  34 # Driver interface for generic Linux wireless extensions
  35 CONFIG_DRIVER_WEXT=y
  36
  37 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
  38 #CONFIG_DRIVER_BSD=y
  39 #CFLAGS += -I/usr/local/include
  40 #LIBS += -L/usr/local/lib
  41
  42 # Driver interface for Windows NDIS
  43 #CONFIG_DRIVER_NDIS=y
  44 #CFLAGS += -I/usr/include/w32api/ddk
  45 #LIBS += -L/usr/local/lib
  46 # For native build using mingw
  47 #CONFIG_NATIVE_WINDOWS=y
  48 # Additional directories for cross-compilation on Linux host for mingw target
  49 #CFLAGS += -I/opt/mingw/mingw32/include/ddk
  50 #LIBS += -L/opt/mingw/mingw32/lib
  51 #CC=mingw32-gcc
  52
  53 # Driver interface for development testing
  54 #CONFIG_DRIVER_TEST=y
  55
  56 # Driver interface for wired Ethernet drivers
  57 CONFIG_DRIVER_WIRED=y
  58
  59 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
  60 # included)
  61 CONFIG_IEEE8021X_EAPOL=y
  62
  63 # EAP-MD5 (automatically included if EAP-TTLS is enabled)
  64 CONFIG_EAP_MD5=y
  65
  66 # EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
  67 CONFIG_EAP_MSCHAPV2=y
  68
  69 # EAP-TLS
  70 CONFIG_EAP_TLS=y
  71
  72 # EAL-PEAP
  73 CONFIG_EAP_PEAP=y
  74
  75 # EAP-TTLS
  76 CONFIG_EAP_TTLS=y
  77
  78 # EAP-GTC
  79 CONFIG_EAP_GTC=y
  80
  81 # EAP-OTP
  82 CONFIG_EAP_OTP=y
  83
  84 # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
  85 #CONFIG_EAP_SIM=y
  86
  87 # EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
  88 #CONFIG_EAP_PSK=y
  89
  90 # EAP-PAX
  91 #CONFIG_EAP_PAX=y
  92
  93 # LEAP
  94 CONFIG_EAP_LEAP=y
  95
  96 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
  97 #CONFIG_EAP_AKA=y
  98
  99 # PKCS#12 (PFX) support (used to read private key and certificate file from
 100 # a file that usually has extension .p12 or .pfx)
 101 CONFIG_PKCS12=y
 102
 103 # Smartcard support (i.e., private key on a smartcard), e.g., with openssl
 104 # engine.
 105 CONFIG_SMARTCARD=y
 106
 107 # PC/SC interface for smartcards (USIM, GSM SIM)
 108 # Enable this if EAP-SIM or EAP-AKA is included
 109 #CONFIG_PCSC=y
 110
 111 # Development testing
 112 #CONFIG_EAPOL_TEST=y
 113
 114 # Replace native Linux implementation of packet sockets with libdnet/libpcap.
 115 # This will be automatically set for non-Linux OS.
 116 #CONFIG_DNET_PCAP=y
 117
 118 # Include control interface for external programs, e.g, wpa_cli
 119 CONFIG_CTRL_IFACE=y
 120
 121 # Include support for GNU Readline and History Libraries in wpa_cli.
 122 # When building a wpa_cli binary for distribution, please note that these
 123 # libraries are licensed under GPL and as such, BSD license may not apply for
 124 # the resulting binary.
 125 #CONFIG_READLINE=y
 126
 127 # Remove debugging code that is printing out debug message to stdout.
 128 # This can be used to reduce the size of the wpa_supplicant considerably
 129 # if debugging code is not needed. The size reduction can be around 35%
 130 # (e.g., 90 kB).
 131 #CONFIG_NO_STDOUT_DEBUG=y
 132
 133 # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
 134 # 35-50 kB in code size.
 135 #CONFIG_NO_WPA=y
 136
 137 # Select configuration backend:
 138 # file = text file (e.g., wpa_supplicant.conf)
 139 CONFIG_BACKEND=file