package/wpa_supplicant/files/config.powerpc

   1 # Example wpa_supplicant build time configuration
   2 #
   3 # This file lists the configuration options that are used when building the
   4 # hostapd binary. All lines starting with # are ignored. Configuration option
   5 # lines must be commented out complete, if they are not to be included, i.e.,
   6 # just setting VARIABLE=n is not disabling that variable.
   7 #
   8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
   9 # be modified from here. In most cases, these lines should use += in order not
  10 # to override previous values of the variables.
  11
  12
  13 # Uncomment following two lines and fix the paths if you have installed openssl
  14 # in non-default location
  15 #CFLAGS += -I/usr/local/openssl/include
  16 #LIBS += -L/usr/local/openssl/lib
  17
  18 # Some Red Hat versions seem to include kerberos header files from OpenSSL, but
  19 # the kerberos files are not in the default include path. Following line can be
  20 # used to fix build issues on such systems (krb5.h not found).
  21 #CFLAGS += -I/usr/include/kerberos
  22
  23 # Example configuration for various cross-compilation platforms
  24
  25 #### sveasoft (e.g., for Linksys WRT54G) ######################################
  26 #CC=mipsel-uclibc-gcc
  27 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
  28 #CFLAGS += -Os
  29 #CPPFLAGS += -I../src/include -I../../src/router/openssl/include
  30 #LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
  31 ###############################################################################
  32
  33 #### openwrt (e.g., for Linksys WRT54G) #######################################
  34 #CC=mipsel-uclibc-gcc
  35 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
  36 #CFLAGS += -Os
  37 #CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
  38 #       -I../WRT54GS/release/src/include
  39 #LIBS = -lssl
  40 ###############################################################################
  41
  42
  43 # Driver interface for Host AP driver
  44 CONFIG_DRIVER_HOSTAP=y
  45
  46 # Driver interface for Agere driver
  47 #CONFIG_DRIVER_HERMES=y
  48 # Change include directories to match with the local setup
  49 #CFLAGS += -I../../hcf -I../../include -I../../include/hcf
  50 #CFLAGS += -I../../include/wireless
  51
  52 # Driver interface for madwifi driver
  53 #CONFIG_DRIVER_MADWIFI=y
  54 # Change include directories to match with the local setup
  55 #CFLAGS += -I../madwifi/wpa
  56
  57 # Driver interface for Prism54 driver
  58 # (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
  59 # for developers only)
  60 #CONFIG_DRIVER_PRISM54=y
  61
  62 # Driver interface for ndiswrapper
  63 #CONFIG_DRIVER_NDISWRAPPER=y
  64
  65 # Driver interface for Atmel driver
  66 CONFIG_DRIVER_ATMEL=y
  67
  68 # Driver interface for Broadcom driver
  69 #CONFIG_DRIVER_BROADCOM=y
  70 # Example path for wlioctl.h; change to match your configuration
  71 #CFLAGS += -I/opt/WRT54GS/release/src/include
  72
  73 # Driver interface for Intel ipw2100/2200 driver
  74 #CONFIG_DRIVER_IPW=y
  75
  76 # Driver interface for generic Linux wireless extensions
  77 CONFIG_DRIVER_WEXT=y
  78
  79 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
  80 #CONFIG_DRIVER_BSD=y
  81 #CFLAGS += -I/usr/local/include
  82 #LIBS += -L/usr/local/lib
  83
  84 # Driver interface for Windows NDIS
  85 #CONFIG_DRIVER_NDIS=y
  86 #CFLAGS += -I/usr/include/w32api/ddk
  87 #LIBS += -L/usr/local/lib
  88 # For native build using mingw
  89 #CONFIG_NATIVE_WINDOWS=y
  90 # Additional directories for cross-compilation on Linux host for mingw target
  91 #CFLAGS += -I/opt/mingw/mingw32/include/ddk
  92 #LIBS += -L/opt/mingw/mingw32/lib
  93 #CC=mingw32-gcc
  94
  95 # Driver interface for development testing
  96 #CONFIG_DRIVER_TEST=y
  97
  98 # Driver interface for wired Ethernet drivers
  99 CONFIG_DRIVER_WIRED=y
 100
 101 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
 102 # included)
 103 CONFIG_IEEE8021X_EAPOL=y
 104
 105 # EAP-MD5 (automatically included if EAP-TTLS is enabled)
 106 CONFIG_EAP_MD5=y
 107
 108 # EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
 109 CONFIG_EAP_MSCHAPV2=y
 110
 111 # EAP-TLS
 112 CONFIG_EAP_TLS=y
 113
 114 # EAL-PEAP
 115 CONFIG_EAP_PEAP=y
 116
 117 # EAP-TTLS
 118 CONFIG_EAP_TTLS=y
 119
 120 # EAP-GTC
 121 CONFIG_EAP_GTC=y
 122
 123 # EAP-OTP
 124 CONFIG_EAP_OTP=y
 125
 126 # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
 127 #CONFIG_EAP_SIM=y
 128
 129 # EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
 130 #CONFIG_EAP_PSK=y
 131
 132 # EAP-PAX
 133 #CONFIG_EAP_PAX=y
 134
 135 # LEAP
 136 CONFIG_EAP_LEAP=y
 137
 138 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
 139 #CONFIG_EAP_AKA=y
 140
 141 # PKCS#12 (PFX) support (used to read private key and certificate file from
 142 # a file that usually has extension .p12 or .pfx)
 143 CONFIG_PKCS12=y
 144
 145 # Smartcard support (i.e., private key on a smartcard), e.g., with openssl
 146 # engine.
 147 CONFIG_SMARTCARD=y
 148
 149 # PC/SC interface for smartcards (USIM, GSM SIM)
 150 # Enable this if EAP-SIM or EAP-AKA is included
 151 #CONFIG_PCSC=y
 152
 153 # Development testing
 154 #CONFIG_EAPOL_TEST=y
 155
 156 # Replace native Linux implementation of packet sockets with libdnet/libpcap.
 157 # This will be automatically set for non-Linux OS.
 158 #CONFIG_DNET_PCAP=y
 159
 160 # Include control interface for external programs, e.g, wpa_cli
 161 CONFIG_CTRL_IFACE=y
 162
 163 # Include support for GNU Readline and History Libraries in wpa_cli.
 164 # When building a wpa_cli binary for distribution, please note that these
 165 # libraries are licensed under GPL and as such, BSD license may not apply for
 166 # the resulting binary.
 167 #CONFIG_READLINE=y
 168
 169 # Remove debugging code that is printing out debug message to stdout.
 170 # This can be used to reduce the size of the wpa_supplicant considerably
 171 # if debugging code is not needed. The size reduction can be around 35%
 172 # (e.g., 90 kB).
 173 #CONFIG_NO_STDOUT_DEBUG=y
 174
 175 # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
 176 # 35-50 kB in code size.
 177 #CONFIG_NO_WPA=y
 178
 179 # Select configuration backend:
 180 # file = text file (e.g., wpa_supplicant.conf)
 181 CONFIG_BACKEND=file