package/mac80211/patches/007-remove_unused_stuff.patch

   1 --- a/config.mk
   2 +++ b/config.mk
   3 @@ -104,10 +104,10 @@ CONFIG_MAC80211_MESH=y
   4  CONFIG_CFG80211=m
   5  # CONFIG_CFG80211_REG_DEBUG=y
   6
   7 -CONFIG_LIB80211=m
   8 -CONFIG_LIB80211_CRYPT_WEP=m
   9 -CONFIG_LIB80211_CRYPT_CCMP=m
  10 -CONFIG_LIB80211_CRYPT_TKIP=m
  11 +# CONFIG_LIB80211=m
  12 +# CONFIG_LIB80211_CRYPT_WEP=m
  13 +# CONFIG_LIB80211_CRYPT_CCMP=m
  14 +# CONFIG_LIB80211_CRYPT_TKIP=m
  15  # CONFIG_LIB80211_DEBUG=y
  16
  17  CONFIG_NL80211=y
  18 @@ -128,54 +128,54 @@ CONFIG_ATH9K=m
  19  # CONFIG_ATH9K_DEBUG=y
  20
  21
  22 -CONFIG_IWLWIFI=m
  23 -CONFIG_IWLWIFI_LEDS=y
  24 +# CONFIG_IWLWIFI=m
  25 +# CONFIG_IWLWIFI_LEDS=y
  26  # CONFIG_IWLWIFI_RFKILL=y
  27 -CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
  28 +# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
  29  # CONFIG_IWLWIFI_DEBUG=y
  30  # CONFIG_IWLWIFI_DEBUGFS=y
  31 -CONFIG_IWLAGN=m
  32 -CONFIG_IWL4965=y
  33 -CONFIG_IWL5000=y
  34 -CONFIG_IWL3945=m
  35 -CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
  36 +# CONFIG_IWLAGN=m
  37 +# CONFIG_IWL4965=y
  38 +# CONFIG_IWL5000=y
  39 +# CONFIG_IWL3945=m
  40 +# CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
  41
  42
  43 -CONFIG_B43=m
  44 -CONFIG_B43_PCI_AUTOSELECT=y
  45 -CONFIG_B43_PCICORE_AUTOSELECT=y
  46 -CONFIG_B43_PCMCIA=y
  47 -CONFIG_B43_PIO=y
  48 -CONFIG_B43_LEDS=y
  49 +# CONFIG_B43=m
  50 +# CONFIG_B43_PCI_AUTOSELECT=y
  51 +# CONFIG_B43_PCICORE_AUTOSELECT=y
  52 +# CONFIG_B43_PCMCIA=y
  53 +# CONFIG_B43_PIO=y
  54 +# CONFIG_B43_LEDS=y
  55  # CONFIG_B43_RFKILL=y
  56  # CONFIG_B43_DEBUG=y
  57  # CONFIG_B43_FORCE_PIO=y
  58
  59 -CONFIG_B43LEGACY=m
  60 -CONFIG_B43LEGACY_PCI_AUTOSELECT=y
  61 -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
  62 -CONFIG_B43LEGACY_LEDS=y
  63 +# CONFIG_B43LEGACY=m
  64 +# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
  65 +# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
  66 +# CONFIG_B43LEGACY_LEDS=y
  67  # CONFIG_B43LEGACY_RFKILL=y
  68  # CONFIG_B43LEGACY_DEBUG=y
  69  CONFIG_B43LEGACY_DMA=y
  70 -CONFIG_B43LEGACY_PIO=y
  71 -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
  72 -# CONFIG_B43LEGACY_DMA_MODE=y
  73 +# CONFIG_B43LEGACY_PIO=y
  74 +# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
  75 +CONFIG_B43LEGACY_DMA_MODE=y
  76  # CONFIG_B43LEGACY_PIO_MODE=y
  77
  78  # The Intel ipws
  79 -CONFIG_LIBIPW=m
  80 +# CONFIG_LIBIPW=m
  81  # CONFIG_LIBIPW_DEBUG=y
  82
  83
  84 -CONFIG_IPW2100=m
  85 -CONFIG_IPW2100_MONITOR=y
  86 +# CONFIG_IPW2100=m
  87 +# CONFIG_IPW2100_MONITOR=y
  88  # CONFIG_IPW2100_DEBUG=y
  89 -CONFIG_IPW2200=m
  90 -CONFIG_IPW2200_MONITOR=y
  91 -CONFIG_IPW2200_RADIOTAP=y
  92 -CONFIG_IPW2200_PROMISCUOUS=y
  93 -CONFIG_IPW2200_QOS=y
  94 +# CONFIG_IPW2200=m
  95 +# CONFIG_IPW2200_MONITOR=y
  96 +# CONFIG_IPW2200_RADIOTAP=y
  97 +# CONFIG_IPW2200_PROMISCUOUS=y
  98 +# CONFIG_IPW2200_QOS=y
  99  # CONFIG_IPW2200_DEBUG=y
 100  # The above enables use a second interface prefixed 'rtap'.
 101  #           Example usage:
 102 @@ -190,27 +190,27 @@ CONFIG_IPW2200_QOS=y
 103  #
 104  # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
 105
 106 -CONFIG_SSB_BLOCKIO=y
 107 -CONFIG_SSB_PCIHOST_POSSIBLE=y
 108 -CONFIG_SSB_PCIHOST=y
 109 -CONFIG_SSB_B43_PCI_BRIDGE=y
 110 -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 111 -CONFIG_SSB_PCMCIAHOST=y
 112 +# CONFIG_SSB_BLOCKIO=y
 113 +# CONFIG_SSB_PCIHOST_POSSIBLE=y
 114 +# CONFIG_SSB_PCIHOST=y
 115 +# CONFIG_SSB_B43_PCI_BRIDGE=y
 116 +# CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 117 +# CONFIG_SSB_PCMCIAHOST=y
 118  # CONFIG_SSB_DEBUG=y
 119 -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 120 -CONFIG_SSB_DRIVER_PCICORE=y
 121 +# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 122 +# CONFIG_SSB_DRIVER_PCICORE=y
 123
 124  CONFIG_P54_PCI=m
 125
 126 -CONFIG_B44=m
 127 -CONFIG_B44_PCI_AUTOSELECT=y
 128 -CONFIG_B44_PCICORE_AUTOSELECT=y
 129 -CONFIG_B44_PCI=y
 130 +# CONFIG_B44=m
 131 +# CONFIG_B44_PCI_AUTOSELECT=y
 132 +# CONFIG_B44_PCICORE_AUTOSELECT=y
 133 +# CONFIG_B44_PCI=y
 134
 135 -CONFIG_RTL8180=m
 136 +# CONFIG_RTL8180=m
 137
 138 -CONFIG_ADM8211=m
 139 -CONFIG_PCMCIA_ATMEL=m
 140 +# CONFIG_ADM8211=m
 141 +# CONFIG_PCMCIA_ATMEL=m
 142
 143  CONFIG_RT2X00_LIB_PCI=m
 144  CONFIG_RT2400PCI=m
 145 @@ -226,16 +226,16 @@ CONFIG_RT61PCI=m
 146  NEED_RT2X00_FIRMWARE=y
 147  endif
 148
 149 -CONFIG_ATMEL=m
 150 -CONFIG_PCI_ATMEL=m
 151 +# CONFIG_ATMEL=m
 152 +# CONFIG_PCI_ATMEL=m
 153
 154 -CONFIG_MWL8K=m
 155 +# CONFIG_MWL8K=m
 156
 157  endif
 158  ## end of PCI
 159
 160  # This is required for some cards
 161 -CONFIG_EEPROM_93CX6=m
 162 +# CONFIG_EEPROM_93CX6=m
 163
 164  # USB Drivers
 165  ifneq ($(CONFIG_USB),)
 166 @@ -249,21 +249,21 @@ CONFIG_ZD1211RW=m
 167  # is only wireless RNDIS chip known to date.
 168  # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
 169  # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
 170 -CONFIG_USB_NET_RNDIS_HOST=m
 171 -CONFIG_USB_NET_RNDIS_WLAN=m
 172 -CONFIG_USB_NET_CDCETHER=m
 173 +# CONFIG_USB_NET_RNDIS_HOST=m
 174 +# CONFIG_USB_NET_RNDIS_WLAN=m
 175 +# CONFIG_USB_NET_CDCETHER=m
 176
 177
 178  CONFIG_P54_USB=m
 179 -CONFIG_RTL8187=m
 180 +# CONFIG_RTL8187=m
 181
 182 -CONFIG_AT76C50X_USB=m
 183 +# CONFIG_AT76C50X_USB=m
 184
 185  # Activate AR9170 support only on kernel >= 2.6.29.
 186  # The needed USB poison feature was added in this kernel release.
 187  ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 29 && echo yes),yes)
 188 -CONFIG_AR9170_USB=m
 189 -CONFIG_AR9170_LEDS=y
 190 +# CONFIG_AR9170_USB=m
 191 +# CONFIG_AR9170_LEDS=y
 192  endif
 193
 194  # RT2500USB does not require firmware
 195 @@ -301,20 +301,20 @@ CONFIG_P54_COMMON=m
 196
 197
 198  # Sonics Silicon Backplane
 199 -CONFIG_SSB_POSSIBLE=y
 200 -CONFIG_SSB=m
 201 -CONFIG_SSB_SPROM=y
 202 +# CONFIG_SSB_POSSIBLE=y
 203 +# CONFIG_SSB=m
 204 +# CONFIG_SSB_SPROM=y
 205  # CONFIG_SSB_DEBUG=y
 206
 207  ifneq ($(CONFIG_USB),)
 208  ifneq ($(CONFIG_LIBERTAS_THINFIRM_USB),m)
 209 -CONFIG_LIBERTAS_USB=m
 210 -NEED_LIBERTAS=y
 211 +# CONFIG_LIBERTAS_USB=m
 212 +# NEED_LIBERTAS=y
 213  endif
 214  endif
 215  ifneq ($(CONFIG_PCMCIA),)
 216 -CONFIG_LIBERTAS_CS=m
 217 -NEED_LIBERTAS=y
 218 +# CONFIG_LIBERTAS_CS=m
 219 +# NEED_LIBERTAS=y
 220  endif
 221  ifeq ($(NEED_LIBERTAS),y)
 222  CONFIG_LIBERTAS=m