package/hostapd/files/full.config

   1 # Example hostapd build time configuration
   2 #
   3 # This file lists the configuration options that are used when building the
   4 # hostapd binary. All lines starting with # are ignored. Configuration option
   5 # lines must be commented out complete, if they are not to be included, i.e.,
   6 # just setting VARIABLE=n is not disabling that variable.
   7 #
   8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
   9 # be modified from here. In most cass, these lines should use += in order not
  10 # to override previous values of the variables.
  11
  12 # Driver interface for Host AP driver
  13 CONFIG_DRIVER_HOSTAP=y
  14
  15 # Driver interface for wired authenticator
  16 CONFIG_DRIVER_WIRED=y
  17
  18 # Driver interface for madwifi driver
  19 CONFIG_DRIVER_MADWIFI=y
  20 #CFLAGS += -I../../madwifi # change to the madwifi source directory
  21
  22 # Driver interface for Prism54 driver
  23 #CONFIG_DRIVER_PRISM54=y
  24
  25 # Driver interface for drivers using the nl80211 kernel interface
  26 CONFIG_DRIVER_NL80211=y
  27 # driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
  28 # shipped with your distribution yet. If that is the case, you need to build
  29 # newer libnl version and point the hostapd build to use it.
  30 #LIBNL=/usr/src/libnl
  31 #CFLAGS += -I$(LIBNL)/include
  32 #LIBS += -L$(LIBNL)/lib
  33
  34 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
  35 #CONFIG_DRIVER_BSD=y
  36 #CFLAGS += -I/usr/local/include
  37 #LIBS += -L/usr/local/lib
  38
  39 # Driver interface for no driver (e.g., RADIUS server only)
  40 #CONFIG_DRIVER_NONE=y
  41
  42 # IEEE 802.11F/IAPP
  43 CONFIG_IAPP=y
  44
  45 # WPA2/IEEE 802.11i RSN pre-authentication
  46 CONFIG_RSN_PREAUTH=y
  47
  48 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
  49 CONFIG_PEERKEY=y
  50
  51 # IEEE 802.11w (management frame protection)
  52 # This version is an experimental implementation based on IEEE 802.11w/D1.0
  53 # draft and is subject to change since the standard has not yet been finalized.
  54 # Driver support is also needed for IEEE 802.11w.
  55 #CONFIG_IEEE80211W=y
  56
  57 # Integrated EAP server
  58 CONFIG_EAP=y
  59
  60 # EAP-MD5 for the integrated EAP server
  61 CONFIG_EAP_MD5=y
  62
  63 # EAP-TLS for the integrated EAP server
  64 CONFIG_EAP_TLS=y
  65
  66 # EAP-MSCHAPv2 for the integrated EAP server
  67 CONFIG_EAP_MSCHAPV2=y
  68
  69 # EAP-PEAP for the integrated EAP server
  70 CONFIG_EAP_PEAP=y
  71
  72 # EAP-GTC for the integrated EAP server
  73 CONFIG_EAP_GTC=y
  74
  75 # EAP-TTLS for the integrated EAP server
  76 CONFIG_EAP_TTLS=y
  77
  78 # EAP-SIM for the integrated EAP server
  79 #CONFIG_EAP_SIM=y
  80
  81 # EAP-AKA for the integrated EAP server
  82 #CONFIG_EAP_AKA=y
  83
  84 # EAP-AKA' for the integrated EAP server
  85 # This requires CONFIG_EAP_AKA to be enabled, too.
  86 #CONFIG_EAP_AKA_PRIME=y
  87
  88 # EAP-PAX for the integrated EAP server
  89 #CONFIG_EAP_PAX=y
  90
  91 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
  92 #CONFIG_EAP_PSK=y
  93
  94 # EAP-SAKE for the integrated EAP server
  95 #CONFIG_EAP_SAKE=y
  96
  97 # EAP-GPSK for the integrated EAP server
  98 #CONFIG_EAP_GPSK=y
  99 # Include support for optional SHA256 cipher suite in EAP-GPSK
 100 #CONFIG_EAP_GPSK_SHA256=y
 101
 102 # EAP-FAST for the integrated EAP server
 103 # Note: Default OpenSSL package does not include support for all the
 104 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
 105 # the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
 106 # to add the needed functions.
 107 #CONFIG_EAP_FAST=y
 108
 109 # Wi-Fi Protected Setup (WPS)
 110 #CONFIG_WPS=y
 111 # Enable UPnP support for external WPS Registrars
 112 #CONFIG_WPS_UPNP=y
 113
 114 # EAP-IKEv2
 115 #CONFIG_EAP_IKEV2=y
 116
 117 # Trusted Network Connect (EAP-TNC)
 118 #CONFIG_EAP_TNC=y
 119
 120 # PKCS#12 (PFX) support (used to read private key and certificate file from
 121 # a file that usually has extension .p12 or .pfx)
 122 CONFIG_PKCS12=y
 123
 124 # RADIUS authentication server. This provides access to the integrated EAP
 125 # server from external hosts using RADIUS.
 126 #CONFIG_RADIUS_SERVER=y
 127
 128 # Build IPv6 support for RADIUS operations
 129 CONFIG_IPV6=y
 130
 131 # IEEE Std 802.11r-2008 (Fast BSS Transition)
 132 #CONFIG_IEEE80211R=y
 133
 134 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
 135 # the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
 136 #CONFIG_DRIVER_RADIUS_ACL=y
 137
 138 # IEEE 802.11n (High Throughput) support
 139 CONFIG_IEEE80211N=y
 140
 141 # Remove debugging code that is printing out debug messages to stdout.
 142 # This can be used to reduce the size of the hostapd considerably if debugging
 143 # code is not needed.
 144 #CONFIG_NO_STDOUT_DEBUG=y
 145
 146 # Remove support for RADIUS accounting
 147 #CONFIG_NO_ACCOUNTING=y
 148
 149 # Remove support for RADIUS
 150 #CONFIG_NO_RADIUS=y
 151
 152 # Remove support for VLANs
 153 #CONFIG_NO_VLAN=y
 154
 155 CONFIG_TLS=internal
 156 CONFIG_INTERNAL_LIBTOMMATH=y
 157 CONFIG_INTERNAL_AES=y
 158 NEED_AES_DEC=y