ar71xx: add support for the Senao EAP7660D board
[openwrt.git] / target / linux / rdc / patches-2.6.32 / 014-r6040_phylib_support.patch
1 --- a/drivers/net/r6040.c
2 +++ b/drivers/net/r6040.c
3 @@ -45,6 +45,7 @@
4 #include <linux/io.h>
5 #include <linux/irq.h>
6 #include <linux/uaccess.h>
7 +#include <linux/phy.h>
8
9 #include <asm/processor.h>
10
11 @@ -180,7 +181,6 @@ struct r6040_descriptor {
12
13 struct r6040_private {
14 spinlock_t lock; /* driver lock */
15 - struct timer_list timer;
16 struct pci_dev *pdev;
17 struct r6040_descriptor *rx_insert_ptr;
18 struct r6040_descriptor *rx_remove_ptr;
19 @@ -190,13 +190,15 @@ struct r6040_private {
20 struct r6040_descriptor *tx_ring;
21 dma_addr_t rx_ring_dma;
22 dma_addr_t tx_ring_dma;
23 - u16 tx_free_desc, phy_addr, phy_mode;
24 + u16 tx_free_desc, phy_addr;
25 u16 mcr0, mcr1;
26 - u16 switch_sig;
27 struct net_device *dev;
28 - struct mii_if_info mii_if;
29 + struct mii_bus *mii_bus;
30 struct napi_struct napi;
31 void __iomem *base;
32 + struct phy_device *phydev;
33 + int old_link;
34 + int old_duplex;
35 };
36
37 static char version[] __devinitdata = KERN_INFO DRV_NAME
38 @@ -239,20 +241,29 @@ static void r6040_phy_write(void __iomem
39 }
40 }
41
42 -static int r6040_mdio_read(struct net_device *dev, int mii_id, int reg)
43 +static int r6040_mdiobus_read(struct mii_bus *bus, int phy_addr, int reg)
44 {
45 + struct net_device *dev = bus->priv;
46 struct r6040_private *lp = netdev_priv(dev);
47 void __iomem *ioaddr = lp->base;
48
49 - return (r6040_phy_read(ioaddr, lp->phy_addr, reg));
50 + return r6040_phy_read(ioaddr, phy_addr, reg);
51 }
52
53 -static void r6040_mdio_write(struct net_device *dev, int mii_id, int reg, int val)
54 +static int r6040_mdiobus_write(struct mii_bus *bus, int phy_addr, int reg, u16 value)
55 {
56 + struct net_device *dev = bus->priv;
57 struct r6040_private *lp = netdev_priv(dev);
58 void __iomem *ioaddr = lp->base;
59
60 - r6040_phy_write(ioaddr, lp->phy_addr, reg, val);
61 + r6040_phy_write(ioaddr, phy_addr, reg, value);
62 +
63 + return 0;
64 +}
65 +
66 +static int r6040_mdiobus_reset(struct mii_bus *bus)
67 +{
68 + return 0;
69 }
70
71 static void r6040_free_txbufs(struct net_device *dev)
72 @@ -409,10 +420,9 @@ static void r6040_tx_timeout(struct net_
73 void __iomem *ioaddr = priv->base;
74
75 printk(KERN_WARNING "%s: transmit timed out, int enable %4.4x "
76 - "status %4.4x, PHY status %4.4x\n",
77 + "status %4.4x\n",
78 dev->name, ioread16(ioaddr + MIER),
79 - ioread16(ioaddr + MISR),
80 - r6040_mdio_read(dev, priv->mii_if.phy_id, MII_BMSR));
81 + ioread16(ioaddr + MISR));
82
83 dev->stats.tx_errors++;
84
85 @@ -464,9 +474,6 @@ static int r6040_close(struct net_device
86 struct r6040_private *lp = netdev_priv(dev);
87 struct pci_dev *pdev = lp->pdev;
88
89 - /* deleted timer */
90 - del_timer_sync(&lp->timer);
91 -
92 spin_lock_irq(&lp->lock);
93 napi_disable(&lp->napi);
94 netif_stop_queue(dev);
95 @@ -496,64 +503,14 @@ static int r6040_close(struct net_device
96 return 0;
97 }
98
99 -/* Status of PHY CHIP */
100 -static int r6040_phy_mode_chk(struct net_device *dev)
101 -{
102 - struct r6040_private *lp = netdev_priv(dev);
103 - void __iomem *ioaddr = lp->base;
104 - int phy_dat;
105 -
106 - /* PHY Link Status Check */
107 - phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 1);
108 - if (!(phy_dat & 0x4))
109 - phy_dat = 0x8000; /* Link Failed, full duplex */
110 -
111 - /* PHY Chip Auto-Negotiation Status */
112 - phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 1);
113 - if (phy_dat & 0x0020) {
114 - /* Auto Negotiation Mode */
115 - phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 5);
116 - phy_dat &= r6040_phy_read(ioaddr, lp->phy_addr, 4);
117 - if (phy_dat & 0x140)
118 - /* Force full duplex */
119 - phy_dat = 0x8000;
120 - else
121 - phy_dat = 0;
122 - } else {
123 - /* Force Mode */
124 - phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 0);
125 - if (phy_dat & 0x100)
126 - phy_dat = 0x8000;
127 - else
128 - phy_dat = 0x0000;
129 - }
130 -
131 - return phy_dat;
132 -};
133 -
134 -static void r6040_set_carrier(struct mii_if_info *mii)
135 -{
136 - if (r6040_phy_mode_chk(mii->dev)) {
137 - /* autoneg is off: Link is always assumed to be up */
138 - if (!netif_carrier_ok(mii->dev))
139 - netif_carrier_on(mii->dev);
140 - } else
141 - r6040_phy_mode_chk(mii->dev);
142 -}
143 -
144 static int r6040_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
145 {
146 struct r6040_private *lp = netdev_priv(dev);
147 - struct mii_ioctl_data *data = if_mii(rq);
148 - int rc;
149
150 - if (!netif_running(dev))
151 + if (!lp->phydev)
152 return -EINVAL;
153 - spin_lock_irq(&lp->lock);
154 - rc = generic_mii_ioctl(&lp->mii_if, data, cmd, NULL);
155 - spin_unlock_irq(&lp->lock);
156 - r6040_set_carrier(&lp->mii_if);
157 - return rc;
158 +
159 + return phy_mii_ioctl(lp->phydev, if_mii(rq), cmd);
160 }
161
162 static int r6040_rx(struct net_device *dev, int limit)
163 @@ -752,26 +709,6 @@ static int r6040_up(struct net_device *d
164 if (ret)
165 return ret;
166
167 - /* Read the PHY ID */
168 - lp->switch_sig = r6040_phy_read(ioaddr, 0, 2);
169 -
170 - if (lp->switch_sig == ICPLUS_PHY_ID) {
171 - r6040_phy_write(ioaddr, 29, 31, 0x175C); /* Enable registers */
172 - lp->phy_mode = 0x8000;
173 - } else {
174 - /* PHY Mode Check */
175 - r6040_phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
176 - r6040_phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
177 -
178 - if (PHY_MODE == 0x3100)
179 - lp->phy_mode = r6040_phy_mode_chk(dev);
180 - else
181 - lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
182 - }
183 -
184 - /* Set duplex mode */
185 - lp->mcr0 |= lp->phy_mode;
186 -
187 /* improve performance (by RDC guys) */
188 r6040_phy_write(ioaddr, 30, 17, (r6040_phy_read(ioaddr, 30, 17) | 0x4000));
189 r6040_phy_write(ioaddr, 30, 17, ~((~r6040_phy_read(ioaddr, 30, 17)) | 0x2000));
190 @@ -784,35 +721,6 @@ static int r6040_up(struct net_device *d
191 return 0;
192 }
193
194 -/*
195 - A periodic timer routine
196 - Polling PHY Chip Link Status
197 -*/
198 -static void r6040_timer(unsigned long data)
199 -{
200 - struct net_device *dev = (struct net_device *)data;
201 - struct r6040_private *lp = netdev_priv(dev);
202 - void __iomem *ioaddr = lp->base;
203 - u16 phy_mode;
204 -
205 - /* Polling PHY Chip Status */
206 - if (PHY_MODE == 0x3100)
207 - phy_mode = r6040_phy_mode_chk(dev);
208 - else
209 - phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
210 -
211 - if (phy_mode != lp->phy_mode) {
212 - lp->phy_mode = phy_mode;
213 - lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode;
214 - iowrite16(lp->mcr0, ioaddr);
215 - }
216 -
217 - /* Timer active again */
218 - mod_timer(&lp->timer, round_jiffies(jiffies + HZ));
219 -
220 - /* Check media */
221 - mii_check_media(&lp->mii_if, 1, 1);
222 -}
223
224 /* Read/set MAC address routines */
225 static void r6040_mac_address(struct net_device *dev)
226 @@ -874,10 +782,6 @@ static int r6040_open(struct net_device
227 napi_enable(&lp->napi);
228 netif_start_queue(dev);
229
230 - /* set and active a timer process */
231 - setup_timer(&lp->timer, r6040_timer, (unsigned long) dev);
232 - if (lp->switch_sig != ICPLUS_PHY_ID)
233 - mod_timer(&lp->timer, jiffies + HZ);
234 return 0;
235 }
236
237 @@ -1020,40 +924,22 @@ static void netdev_get_drvinfo(struct ne
238 static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
239 {
240 struct r6040_private *rp = netdev_priv(dev);
241 - int rc;
242 -
243 - spin_lock_irq(&rp->lock);
244 - rc = mii_ethtool_gset(&rp->mii_if, cmd);
245 - spin_unlock_irq(&rp->lock);
246
247 - return rc;
248 + return phy_ethtool_gset(rp->phydev, cmd);
249 }
250
251 static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
252 {
253 struct r6040_private *rp = netdev_priv(dev);
254 - int rc;
255 -
256 - spin_lock_irq(&rp->lock);
257 - rc = mii_ethtool_sset(&rp->mii_if, cmd);
258 - spin_unlock_irq(&rp->lock);
259 - r6040_set_carrier(&rp->mii_if);
260 -
261 - return rc;
262 -}
263 -
264 -static u32 netdev_get_link(struct net_device *dev)
265 -{
266 - struct r6040_private *rp = netdev_priv(dev);
267
268 - return mii_link_ok(&rp->mii_if);
269 + return phy_ethtool_sset(rp->phydev, cmd);
270 }
271
272 static const struct ethtool_ops netdev_ethtool_ops = {
273 .get_drvinfo = netdev_get_drvinfo,
274 .get_settings = netdev_get_settings,
275 .set_settings = netdev_set_settings,
276 - .get_link = netdev_get_link,
277 + .get_link = ethtool_op_get_link,
278 };
279
280 static const struct net_device_ops r6040_netdev_ops = {
281 @@ -1072,6 +958,86 @@ static const struct net_device_ops r6040
282 #endif
283 };
284
285 +static void r6040_adjust_link(struct net_device *dev)
286 +{
287 + struct r6040_private *lp = netdev_priv(dev);
288 + struct phy_device *phydev = lp->phydev;
289 + int status_changed = 0;
290 + void __iomem *ioaddr = lp->base;
291 +
292 + BUG_ON (!phydev);
293 +
294 + if (lp->old_link != phydev->link) {
295 + status_changed = 1;
296 + lp->old_link = phydev->link;
297 + }
298 +
299 + /* reflect duplex change */
300 + if (phydev->link && (lp->old_duplex != phydev->duplex)) {
301 + lp->mcr0 |= (phydev->duplex == DUPLEX_FULL ? 0x8000 : 0);
302 + iowrite16(lp->mcr0, ioaddr);
303 +
304 + status_changed = 1;
305 + lp->old_duplex = phydev->duplex;
306 + }
307 +
308 + if (status_changed) {
309 + pr_info("%s: link %s", dev->name, phydev->link ?
310 + "UP" : "DOWN");
311 + if (phydev->link)
312 + pr_cont(" - %d/%s", phydev->speed,
313 + DUPLEX_FULL == phydev->duplex ? "full" : "half");
314 + pr_cont("\n");
315 + }
316 +}
317 +
318 +static int r6040_mii_probe(struct net_device *dev)
319 +{
320 + struct r6040_private *lp = netdev_priv(dev);
321 + struct phy_device *phydev = NULL;
322 + int phy_addr;
323 +
324 + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
325 + if (lp->mii_bus->phy_map[phy_addr]) {
326 + phydev = lp->mii_bus->phy_map[phy_addr];
327 + break;
328 + }
329 + }
330 +
331 + if (!phydev) {
332 + printk(KERN_ERR DRV_NAME "no PHY found\n");
333 + return -ENODEV;
334 + }
335 +
336 + phydev = phy_connect(dev, dev_name(&phydev->dev), &r6040_adjust_link,
337 + 0, PHY_INTERFACE_MODE_MII);
338 +
339 + if (IS_ERR(phydev)) {
340 + printk(KERN_ERR DRV_NAME "could not attach to PHY\n");
341 + return PTR_ERR(phydev);
342 + }
343 +
344 + /* mask with MAC supported features */
345 + phydev->supported &= (SUPPORTED_10baseT_Half
346 + | SUPPORTED_10baseT_Full
347 + | SUPPORTED_100baseT_Half
348 + | SUPPORTED_100baseT_Full
349 + | SUPPORTED_Autoneg
350 + | SUPPORTED_MII
351 + | SUPPORTED_TP);
352 +
353 + phydev->advertising = phydev->supported;
354 + lp->phydev = phydev;
355 + lp->old_link = 0;
356 + lp->old_duplex = -1;
357 +
358 + printk(KERN_INFO "%s: attached PHY driver [%s] "
359 + "(mii_bus:phy_addr=%s)\n", dev->name,
360 + phydev->drv->name, dev_name(&phydev->dev));
361 +
362 + return 0;
363 +}
364 +
365 static int __devinit r6040_init_one(struct pci_dev *pdev,
366 const struct pci_device_id *ent)
367 {
368 @@ -1082,6 +1048,7 @@ static int __devinit r6040_init_one(stru
369 static int card_idx = -1;
370 int bar = 0;
371 u16 *adrp;
372 + int i;
373
374 printk("%s\n", version);
375
376 @@ -1169,7 +1136,6 @@ static int __devinit r6040_init_one(stru
377 /* Init RDC private data */
378 lp->mcr0 = 0x1002;
379 lp->phy_addr = phy_table[card_idx];
380 - lp->switch_sig = 0;
381
382 /* The RDC-specific entries in the device structure. */
383 dev->netdev_ops = &r6040_netdev_ops;
384 @@ -1177,28 +1143,61 @@ static int __devinit r6040_init_one(stru
385 dev->watchdog_timeo = TX_TIMEOUT;
386
387 netif_napi_add(dev, &lp->napi, r6040_poll, 64);
388 - lp->mii_if.dev = dev;
389 - lp->mii_if.mdio_read = r6040_mdio_read;
390 - lp->mii_if.mdio_write = r6040_mdio_write;
391 - lp->mii_if.phy_id = lp->phy_addr;
392 - lp->mii_if.phy_id_mask = 0x1f;
393 - lp->mii_if.reg_num_mask = 0x1f;
394 +
395 + lp->mii_bus = mdiobus_alloc();
396 + if (!lp->mii_bus) {
397 + printk(KERN_ERR DRV_NAME ": mdiobus_alloc failed\n");
398 + goto err_out_unmap;
399 + }
400 +
401 + lp->mii_bus->priv = dev;
402 + lp->mii_bus->read = r6040_mdiobus_read;
403 + lp->mii_bus->write = r6040_mdiobus_write;
404 + lp->mii_bus->reset = r6040_mdiobus_reset;
405 + lp->mii_bus->name = "r6040_eth_mii";
406 + snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "%x", card_idx);
407 + lp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
408 + if (!lp->mii_bus->irq) {
409 + printk(KERN_ERR DRV_NAME ": allocation failed\n");
410 + goto err_out_mdio;
411 + }
412 +
413 + for (i = 0; i < PHY_MAX_ADDR; i++)
414 + lp->mii_bus->irq[i] = PHY_POLL;
415 +
416 + err = mdiobus_register(lp->mii_bus);
417 + if (err) {
418 + printk(KERN_ERR DRV_NAME ": failed to register MII bus\n");
419 + goto err_out_mdio_irq;
420 + }
421 +
422 + err = r6040_mii_probe(dev);
423 + if (err) {
424 + printk(KERN_ERR DRV_NAME ": failed to probe MII bus\n");
425 + goto err_out_mdio_unregister;
426 + }
427
428 /* Check the vendor ID on the PHY, if 0xffff assume none attached */
429 if (r6040_phy_read(ioaddr, lp->phy_addr, 2) == 0xffff) {
430 printk(KERN_ERR DRV_NAME ": Failed to detect an attached PHY\n");
431 err = -ENODEV;
432 - goto err_out_unmap;
433 + goto err_out_mdio_unregister;
434 }
435
436 /* Register net device. After this dev->name assign */
437 err = register_netdev(dev);
438 if (err) {
439 printk(KERN_ERR DRV_NAME ": Failed to register net device\n");
440 - goto err_out_unmap;
441 + goto err_out_mdio_unregister;
442 }
443 return 0;
444
445 +err_out_mdio_unregister:
446 + mdiobus_unregister(lp->mii_bus);
447 +err_out_mdio_irq:
448 + kfree(lp->mii_bus->irq);
449 +err_out_mdio:
450 + mdiobus_free(lp->mii_bus);
451 err_out_unmap:
452 pci_iounmap(pdev, ioaddr);
453 err_out_free_res:
454 @@ -1212,8 +1211,12 @@ err_out:
455 static void __devexit r6040_remove_one(struct pci_dev *pdev)
456 {
457 struct net_device *dev = pci_get_drvdata(pdev);
458 + struct r6040_private *lp = netdev_priv(dev);
459
460 unregister_netdev(dev);
461 + mdiobus_unregister(lp->mii_bus);
462 + kfree(lp->mii_bus->irq);
463 + mdiobus_free(lp->mii_bus);
464 pci_release_regions(pdev);
465 free_netdev(dev);
466 pci_disable_device(pdev);
This page took 0.085658 seconds and 5 git commands to generate.