ramips: fix VLAN config of the RT-N15
[openwrt.git] / target / linux / brcm63xx / patches-3.2 / 001-6345_cpu.patch
1 --- a/arch/mips/bcm63xx/cpu.c
2 +++ b/arch/mips/bcm63xx/cpu.c
3 @@ -260,8 +260,10 @@ static unsigned int detect_memory_size(v
4 unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
5 u32 val;
6
7 - if (BCMCPU_IS_6345())
8 - return (8 * 1024 * 1024);
9 + if (BCMCPU_IS_6345()) {
10 + val = bcm_sdram_readl(SDRAM_MBASE_REG);
11 + return (val * 8 * 1024 * 1024);
12 + }
13
14 if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
15 val = bcm_sdram_readl(SDRAM_CFG_REG);
16 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
17 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
18 @@ -734,6 +734,8 @@
19 #define SDRAM_CFG_BANK_SHIFT 13
20 #define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT)
21
22 +#define SDRAM_MBASE_REG 0xc
23 +
24 #define SDRAM_PRIO_REG 0x2C
25 #define SDRAM_PRIO_MIPS_SHIFT 29
26 #define SDRAM_PRIO_MIPS_MASK (1 << SDRAM_PRIO_MIPS_SHIFT)
27 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
28 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
29 @@ -709,15 +709,9 @@ void __init board_prom_init(void)
30 char cfe_version[32];
31 u32 val;
32
33 - /* read base address of boot chip select (0)
34 - * 6345 does not have MPI but boots from standard
35 - * MIPS Flash address */
36 - if (BCMCPU_IS_6345())
37 - val = 0x1fc00000;
38 - else {
39 - val = bcm_mpi_readl(MPI_CSBASE_REG(0));
40 - val &= MPI_CSBASE_BASE_MASK;
41 - }
42 + /* read base address of boot chip select (0) */
43 + val = bcm_mpi_readl(MPI_CSBASE_REG(0));
44 + val &= MPI_CSBASE_BASE_MASK;
45 boot_addr = (u8 *)KSEG1ADDR(val);
46
47 /* dump cfe version */
48 @@ -893,12 +887,9 @@ int __init board_register_devices(void)
49 bcm63xx_dsp_register(&board.dsp);
50
51 /* read base address of boot chip select (0) */
52 - if (BCMCPU_IS_6345())
53 - val = 0x1fc00000;
54 - else {
55 - val = bcm_mpi_readl(MPI_CSBASE_REG(0));
56 - val &= MPI_CSBASE_BASE_MASK;
57 - }
58 + val = bcm_mpi_readl(MPI_CSBASE_REG(0));
59 + val &= MPI_CSBASE_BASE_MASK;
60 +
61 mtd_resources[0].start = val;
62 mtd_resources[0].end = 0x1FFFFFFF;
63
64 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
65 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
66 @@ -163,7 +163,7 @@ enum bcm63xx_regs_set {
67 #define BCM_6345_ENET0_BASE (0xfffe1800)
68 #define BCM_6345_ENETDMA_BASE (0xfffe2800)
69 #define BCM_6345_PCMCIA_BASE (0xfffe2028)
70 -#define BCM_6345_MPI_BASE (0xdeadbeef)
71 +#define BCM_6345_MPI_BASE (0xfffe2000)
72 #define BCM_6345_OHCI0_BASE (0xfffe2100)
73 #define BCM_6345_OHCI_PRIV_BASE (0xfffe2200)
74 #define BCM_6345_USBH_PRIV_BASE (0xdeadbeef)
75 --- a/arch/mips/bcm63xx/gpio.c
76 +++ b/arch/mips/bcm63xx/gpio.c
77 @@ -4,7 +4,7 @@
78 * for more details.
79 *
80 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
81 - * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
82 + * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
83 */
84
85 #include <linux/kernel.h>
86 @@ -33,7 +33,10 @@ static void bcm63xx_gpio_set(struct gpio
87 BUG();
88
89 if (gpio < 32) {
90 - reg = GPIO_DATA_LO_REG;
91 + if (!BCMCPU_IS_6345())
92 + reg = GPIO_DATA_LO_REG;
93 + else
94 + reg = GPIO_DATA_HI_REG;
95 mask = 1 << gpio;
96 v = &gpio_out_low;
97 } else {
98 @@ -60,7 +63,10 @@ static int bcm63xx_gpio_get(struct gpio_
99 BUG();
100
101 if (gpio < 32) {
102 - reg = GPIO_DATA_LO_REG;
103 + if (!BCMCPU_IS_6345())
104 + reg = GPIO_DATA_LO_REG;
105 + else
106 + reg = GPIO_DATA_HI_REG;
107 mask = 1 << gpio;
108 } else {
109 reg = GPIO_DATA_HI_REG;
110 @@ -125,7 +131,11 @@ static struct gpio_chip bcm63xx_gpio_chi
111
112 int __init bcm63xx_gpio_init(void)
113 {
114 - gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
115 + if (!BCMCPU_IS_6345())
116 + gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
117 + else
118 + gpio_out_low = bcm_gpio_readl(GPIO_DATA_HI_REG);
119 +
120 gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
121 bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
122 pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
This page took 0.054997 seconds and 5 git commands to generate.