2 * Marvell 88E6060 switch driver
3 * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License v2 as published by the
7 * Free Software Foundation
12 #define MV_HEADER_SIZE 2
13 #define MV_HEADER_PORTS_M 0x001f
14 #define MV_HEADER_PORTS_S 0
15 #define MV_HEADER_VLAN_M 0xf000
16 #define MV_HEADER_VLAN_S 12
18 #define MV_TRAILER_SIZE 4
19 #define MV_TRAILER_PORTS_M 0x1f
20 #define MV_TRAILER_PORTS_S 16
21 #define MV_TRAILER_FLAGS_S 24
22 #define MV_TRAILER_OVERRIDE 0x80
31 #define MV_PHYPORT_BASE (MV_BASE + 0x0)
32 #define MV_PHYPORT(_n) (MV_PHYPORT_BASE + (_n))
33 #define MV_SWITCHPORT_BASE (MV_BASE + 0x8)
34 #define MV_SWITCHPORT(_n) (MV_SWITCHPORT_BASE + (_n))
35 #define MV_SWITCHREGS (MV_BASE + 0xf)
38 MV_PHY_CONTROL
= 0x00,
43 MV_PHY_LINK_ABILITY
= 0x05,
44 MV_PHY_ANEG_EXPAND
= 0x06,
45 MV_PHY_XMIT_NEXTP
= 0x07,
46 MV_PHY_LINK_NEXTP
= 0x08,
47 MV_PHY_CONTROL1
= 0x10,
48 MV_PHY_STATUS1
= 0x11,
49 MV_PHY_INTR_EN
= 0x12,
50 MV_PHY_INTR_STATUS
= 0x13,
51 MV_PHY_INTR_PORT
= 0x14,
52 MV_PHY_RECV_COUNTER
= 0x16,
53 MV_PHY_LED_PARALLEL
= 0x16,
54 MV_PHY_LED_STREAM
= 0x17,
55 MV_PHY_LED_CTRL
= 0x18,
56 MV_PHY_LED_OVERRIDE
= 0x19,
57 MV_PHY_VCT_CTRL
= 0x1a,
58 MV_PHY_VCT_STATUS
= 0x1b,
59 MV_PHY_CONTROL2
= 0x1e
61 #define MV_PHYREG(_type, _port) MV_PHYPORT(_port), MV_PHY_##_type
64 MV_PORT_STATUS
= 0x00,
66 MV_PORT_CONTROL
= 0x04,
67 MV_PORT_VLANMAP
= 0x06,
69 MV_PORT_RXCOUNT
= 0x10,
70 MV_PORT_TXCOUNT
= 0x11,
72 #define MV_PORTREG(_type, _port) MV_SWITCHPORT(_port), MV_PORT_##_type
75 MV_PORTCTRL_BLOCK
= (1 << 0),
76 MV_PORTCTRL_LEARN
= (2 << 0),
77 MV_PORTCTRL_ENABLED
= (3 << 0),
78 MV_PORTCTRL_VLANTUN
= (1 << 7), /* Enforce VLANs on packets */
79 MV_PORTCTRL_RXTR
= (1 << 8), /* Enable Marvell packet trailer for ingress */
80 MV_PORTCTRL_HEADER
= (1 << 11), /* Enable Marvell packet header mode for port */
81 MV_PORTCTRL_TXTR
= (1 << 14), /* Enable Marvell packet trailer for egress */
82 MV_PORTCTRL_FORCEFL
= (1 << 15), /* force flow control */
85 #define MV_PORTVLAN_ID(_n) (((_n) & 0xf) << 12)
86 #define MV_PORTVLAN_PORTS(_n) ((_n) & 0x3f)
88 #define MV_PORTASSOC_PORTS(_n) ((_n) & 0x1f)
89 #define MV_PORTASSOC_MONITOR (1 << 15)
92 MV_SWITCH_MAC0
= 0x01,
93 MV_SWITCH_MAC1
= 0x02,
94 MV_SWITCH_MAC2
= 0x03,
95 MV_SWITCH_CTRL
= 0x04,
96 MV_SWITCH_ATU_CTRL
= 0x0a,
97 MV_SWITCH_ATU_OP
= 0x0b,
98 MV_SWITCH_ATU_DATA
= 0x0c,
99 MV_SWITCH_ATU_MAC0
= 0x0d,
100 MV_SWITCH_ATU_MAC1
= 0x0e,
101 MV_SWITCH_ATU_MAC2
= 0x0f,
103 #define MV_SWITCHREG(_type) MV_SWITCHREGS, MV_SWITCH_##_type
106 MV_SWITCHCTL_EEIE
= (1 << 0), /* EEPROM interrupt enable */
107 MV_SWITCHCTL_PHYIE
= (1 << 1), /* PHY interrupt enable */
108 MV_SWITCHCTL_ATUDONE
= (1 << 2), /* ATU done interrupt enable */
109 MV_SWITCHCTL_ATUIE
= (1 << 3), /* ATU interrupt enable */
110 MV_SWITCHCTL_CTRMODE
= (1 << 8), /* statistics for rx and tx errors */
111 MV_SWITCHCTL_RELOAD
= (1 << 9), /* reload registers from eeprom */
112 MV_SWITCHCTL_MSIZE
= (1 << 10), /* increase maximum frame size */
113 MV_SWITCHCTL_DROP
= (1 << 13), /* discard frames with excessive collisions */
117 #define MV_ATUCTL_AGETIME_MIN 16
118 #define MV_ATUCTL_AGETIME_MAX 4080
119 #define MV_ATUCTL_AGETIME(_n) ((((_n) / 16) & 0xff) << 4)
120 MV_ATUCTL_ATU_256
= (0 << 12),
121 MV_ATUCTL_ATU_512
= (1 << 12),
122 MV_ATUCTL_ATU_1K
= (2 << 12),
123 MV_ATUCTL_ATUMASK
= (3 << 12),
124 MV_ATUCTL_NO_LEARN
= (1 << 14),
125 MV_ATUCTL_RESET
= (1 << 15),
129 #define MV_ATUOP_DBNUM(_n) ((_n) & 0x0f)
131 MV_ATUOP_NOOP
= (0 << 12),
132 MV_ATUOP_FLUSH_ALL
= (1 << 12),
133 MV_ATUOP_FLUSH_U
= (2 << 12),
134 MV_ATUOP_LOAD_DB
= (3 << 12),
135 MV_ATUOP_GET_NEXT
= (4 << 12),
136 MV_ATUOP_FLUSH_DB
= (5 << 12),
137 MV_ATUOP_FLUSH_DB_UU
= (6 << 12),
139 MV_ATUOP_INPROGRESS
= (1 << 15),
142 #define MV_IDENT_MASK 0xfff0
143 #define MV_IDENT_VALUE 0x0600
This page took 0.054998 seconds and 5 git commands to generate.