target/linux/lantiq/patches-2.6.39/540-gptu.patch

   1 --- /dev/null
   2 +++ b/arch/mips/lantiq/xway/timer.c
   3 @@ -0,0 +1,830 @@
   4 +#include <linux/kernel.h>
   5 +#include <linux/module.h>
   6 +#include <linux/version.h>
   7 +#include <linux/types.h>
   8 +#include <linux/fs.h>
   9 +#include <linux/miscdevice.h>
  10 +#include <linux/init.h>
  11 +#include <linux/uaccess.h>
  12 +#include <linux/unistd.h>
  13 +#include <linux/errno.h>
  14 +#include <linux/interrupt.h>
  15 +#include <linux/sched.h>
  16 +
  17 +#include <asm/irq.h>
  18 +#include <asm/div64.h>
  19 +
  20 +#include <lantiq_soc.h>
  21 +#include <lantiq_irq.h>
  22 +#include <lantiq_timer.h>
  23 +
  24 +#define MAX_NUM_OF_32BIT_TIMER_BLOCKS  6
  25 +
  26 +#ifdef TIMER1A
  27 +#define FIRST_TIMER                    TIMER1A
  28 +#else
  29 +#define FIRST_TIMER                    2
  30 +#endif
  31 +
  32 +/*
  33 + *  GPTC divider is set or not.
  34 + */
  35 +#define GPTU_CLC_RMC_IS_SET            0
  36 +
  37 +/*
  38 + *  Timer Interrupt (IRQ)
  39 + */
  40 +/*  Must be adjusted when ICU driver is available */
  41 +#define TIMER_INTERRUPT                        (INT_NUM_IM3_IRL0 + 22)
  42 +
  43 +/*
  44 + *  Bits Operation
  45 + */
  46 +#define GET_BITS(x, msb, lsb)          \
  47 +       (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
  48 +#define SET_BITS(x, msb, lsb, value)   \
  49 +       (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
  50 +       (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
  51 +
  52 +/*
  53 + *  GPTU Register Mapping
  54 + */
  55 +#define LQ_GPTU                        (KSEG1 + 0x1E100A00)
  56 +#define LQ_GPTU_CLC            ((volatile u32 *)(LQ_GPTU + 0x0000))
  57 +#define LQ_GPTU_ID                     ((volatile u32 *)(LQ_GPTU + 0x0008))
  58 +#define LQ_GPTU_CON(n, X)              ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020))   /* X must be either A or B */
  59 +#define LQ_GPTU_RUN(n, X)              ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020))   /* X must be either A or B */
  60 +#define LQ_GPTU_RELOAD(n, X)   ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020))   /* X must be either A or B */
  61 +#define LQ_GPTU_COUNT(n, X)    ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020))   /* X must be either A or B */
  62 +#define LQ_GPTU_IRNEN          ((volatile u32 *)(LQ_GPTU + 0x00F4))
  63 +#define LQ_GPTU_IRNICR         ((volatile u32 *)(LQ_GPTU + 0x00F8))
  64 +#define LQ_GPTU_IRNCR          ((volatile u32 *)(LQ_GPTU + 0x00FC))
  65 +
  66 +/*
  67 + *  Clock Control Register
  68 + */
  69 +#define GPTU_CLC_SMC                   GET_BITS(*LQ_GPTU_CLC, 23, 16)
  70 +#define GPTU_CLC_RMC                   GET_BITS(*LQ_GPTU_CLC, 15, 8)
  71 +#define GPTU_CLC_FSOE                  (*LQ_GPTU_CLC & (1 << 5))
  72 +#define GPTU_CLC_EDIS                  (*LQ_GPTU_CLC & (1 << 3))
  73 +#define GPTU_CLC_SPEN                  (*LQ_GPTU_CLC & (1 << 2))
  74 +#define GPTU_CLC_DISS                  (*LQ_GPTU_CLC & (1 << 1))
  75 +#define GPTU_CLC_DISR                  (*LQ_GPTU_CLC & (1 << 0))
  76 +
  77 +#define GPTU_CLC_SMC_SET(value)                SET_BITS(0, 23, 16, (value))
  78 +#define GPTU_CLC_RMC_SET(value)                SET_BITS(0, 15, 8, (value))
  79 +#define GPTU_CLC_FSOE_SET(value)       ((value) ? (1 << 5) : 0)
  80 +#define GPTU_CLC_SBWE_SET(value)       ((value) ? (1 << 4) : 0)
  81 +#define GPTU_CLC_EDIS_SET(value)       ((value) ? (1 << 3) : 0)
  82 +#define GPTU_CLC_SPEN_SET(value)       ((value) ? (1 << 2) : 0)
  83 +#define GPTU_CLC_DISR_SET(value)       ((value) ? (1 << 0) : 0)
  84 +
  85 +/*
  86 + *  ID Register
  87 + */
  88 +#define GPTU_ID_ID                     GET_BITS(*LQ_GPTU_ID, 15, 8)
  89 +#define GPTU_ID_CFG                    GET_BITS(*LQ_GPTU_ID, 7, 5)
  90 +#define GPTU_ID_REV                    GET_BITS(*LQ_GPTU_ID, 4, 0)
  91 +
  92 +/*
  93 + *  Control Register of Timer/Counter nX
  94 + *    n is the index of block (1 based index)
  95 + *    X is either A or B
  96 + */
  97 +#define GPTU_CON_SRC_EG(n, X)          (*LQ_GPTU_CON(n, X) & (1 << 10))
  98 +#define GPTU_CON_SRC_EXT(n, X)         (*LQ_GPTU_CON(n, X) & (1 << 9))
  99 +#define GPTU_CON_SYNC(n, X)            (*LQ_GPTU_CON(n, X) & (1 << 8))
 100 +#define GPTU_CON_EDGE(n, X)            GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
 101 +#define GPTU_CON_INV(n, X)             (*LQ_GPTU_CON(n, X) & (1 << 5))
 102 +#define GPTU_CON_EXT(n, X)             (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */
 103 +#define GPTU_CON_STP(n, X)             (*LQ_GPTU_CON(n, X) & (1 << 3))
 104 +#define GPTU_CON_CNT(n, X)             (*LQ_GPTU_CON(n, X) & (1 << 2))
 105 +#define GPTU_CON_DIR(n, X)             (*LQ_GPTU_CON(n, X) & (1 << 1))
 106 +#define GPTU_CON_EN(n, X)              (*LQ_GPTU_CON(n, X) & (1 << 0))
 107 +
 108 +#define GPTU_CON_SRC_EG_SET(value)     ((value) ? 0 : (1 << 10))
 109 +#define GPTU_CON_SRC_EXT_SET(value)    ((value) ? (1 << 9) : 0)
 110 +#define GPTU_CON_SYNC_SET(value)       ((value) ? (1 << 8) : 0)
 111 +#define GPTU_CON_EDGE_SET(value)       SET_BITS(0, 7, 6, (value))
 112 +#define GPTU_CON_INV_SET(value)                ((value) ? (1 << 5) : 0)
 113 +#define GPTU_CON_EXT_SET(value)                ((value) ? (1 << 4) : 0)
 114 +#define GPTU_CON_STP_SET(value)                ((value) ? (1 << 3) : 0)
 115 +#define GPTU_CON_CNT_SET(value)                ((value) ? (1 << 2) : 0)
 116 +#define GPTU_CON_DIR_SET(value)                ((value) ? (1 << 1) : 0)
 117 +
 118 +#define GPTU_RUN_RL_SET(value)         ((value) ? (1 << 2) : 0)
 119 +#define GPTU_RUN_CEN_SET(value)                ((value) ? (1 << 1) : 0)
 120 +#define GPTU_RUN_SEN_SET(value)                ((value) ? (1 << 0) : 0)
 121 +
 122 +#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
 123 +#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
 124 +
 125 +#define TIMER_FLAG_MASK_SIZE(x)                (x & 0x0001)
 126 +#define TIMER_FLAG_MASK_TYPE(x)                (x & 0x0002)
 127 +#define TIMER_FLAG_MASK_STOP(x)                (x & 0x0004)
 128 +#define TIMER_FLAG_MASK_DIR(x)         (x & 0x0008)
 129 +#define TIMER_FLAG_NONE_EDGE           0x0000
 130 +#define TIMER_FLAG_MASK_EDGE(x)                (x & 0x0030)
 131 +#define TIMER_FLAG_REAL                        0x0000
 132 +#define TIMER_FLAG_INVERT              0x0040
 133 +#define TIMER_FLAG_MASK_INVERT(x)      (x & 0x0040)
 134 +#define TIMER_FLAG_MASK_TRIGGER(x)     (x & 0x0070)
 135 +#define TIMER_FLAG_MASK_SYNC(x)                (x & 0x0080)
 136 +#define TIMER_FLAG_CALLBACK_IN_HB      0x0200
 137 +#define TIMER_FLAG_MASK_HANDLE(x)      (x & 0x0300)
 138 +#define TIMER_FLAG_MASK_SRC(x)         (x & 0x1000)
 139 +
 140 +struct timer_dev_timer {
 141 +       unsigned int f_irq_on;
 142 +       unsigned int irq;
 143 +       unsigned int flag;
 144 +       unsigned long arg1;
 145 +       unsigned long arg2;
 146 +};
 147 +
 148 +struct timer_dev {
 149 +       struct mutex gptu_mutex;
 150 +       unsigned int number_of_timers;
 151 +       unsigned int occupation;
 152 +       unsigned int f_gptu_on;
 153 +       struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
 154 +};
 155 +
 156 +unsigned int ltq_get_fpi_bus_clock(int fpi);
 157 +
 158 +static long gptu_ioctl(struct file *, unsigned int, unsigned long);
 159 +static int gptu_open(struct inode *, struct file *);
 160 +static int gptu_release(struct inode *, struct file *);
 161 +
 162 +static struct file_operations gptu_fops = {
 163 +       .owner = THIS_MODULE,
 164 +       .unlocked_ioctl = gptu_ioctl,
 165 +       .open = gptu_open,
 166 +       .release = gptu_release
 167 +};
 168 +
 169 +static struct miscdevice gptu_miscdev = {
 170 +       .minor = MISC_DYNAMIC_MINOR,
 171 +       .name = "gptu",
 172 +       .fops = &gptu_fops,
 173 +};
 174 +
 175 +static struct timer_dev timer_dev;
 176 +
 177 +static irqreturn_t timer_irq_handler(int irq, void *p)
 178 +{
 179 +       unsigned int timer;
 180 +       unsigned int flag;
 181 +       struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
 182 +
 183 +       timer = irq - TIMER_INTERRUPT;
 184 +       if (timer < timer_dev.number_of_timers
 185 +               && dev_timer == &timer_dev.timer[timer]) {
 186 +               /*  Clear interrupt.    */
 187 +               ltq_w32(1 << timer, LQ_GPTU_IRNCR);
 188 +
 189 +               /*  Call user hanler or signal. */
 190 +               flag = dev_timer->flag;
 191 +               if (!(timer & 0x01)
 192 +                       || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
 193 +                       /* 16-bit timer or timer A of 32-bit timer  */
 194 +                       switch (TIMER_FLAG_MASK_HANDLE(flag)) {
 195 +                       case TIMER_FLAG_CALLBACK_IN_IRQ:
 196 +                       case TIMER_FLAG_CALLBACK_IN_HB:
 197 +                               if (dev_timer->arg1)
 198 +                                       (*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
 199 +                               break;
 200 +                       case TIMER_FLAG_SIGNAL:
 201 +                               send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
 202 +                               break;
 203 +                       }
 204 +               }
 205 +       }
 206 +       return IRQ_HANDLED;
 207 +}
 208 +
 209 +static inline void lq_enable_gptu(void)
 210 +{
 211 +       ltq_pmu_enable(PMU_GPT);
 212 +
 213 +       /*  Set divider as 1, disable write protection for SPEN, enable module. */
 214 +       *LQ_GPTU_CLC =
 215 +               GPTU_CLC_SMC_SET(0x00) |
 216 +               GPTU_CLC_RMC_SET(0x01) |
 217 +               GPTU_CLC_FSOE_SET(0) |
 218 +               GPTU_CLC_SBWE_SET(1) |
 219 +               GPTU_CLC_EDIS_SET(0) |
 220 +               GPTU_CLC_SPEN_SET(0) |
 221 +               GPTU_CLC_DISR_SET(0);
 222 +}
 223 +
 224 +static inline void lq_disable_gptu(void)
 225 +{
 226 +       ltq_w32(0x00, LQ_GPTU_IRNEN);
 227 +       ltq_w32(0xfff, LQ_GPTU_IRNCR);
 228 +
 229 +       /*  Set divider as 0, enable write protection for SPEN, disable module. */
 230 +       *LQ_GPTU_CLC =
 231 +               GPTU_CLC_SMC_SET(0x00) |
 232 +               GPTU_CLC_RMC_SET(0x00) |
 233 +               GPTU_CLC_FSOE_SET(0) |
 234 +               GPTU_CLC_SBWE_SET(0) |
 235 +               GPTU_CLC_EDIS_SET(0) |
 236 +               GPTU_CLC_SPEN_SET(0) |
 237 +               GPTU_CLC_DISR_SET(1);
 238 +
 239 +       ltq_pmu_disable(PMU_GPT);
 240 +}
 241 +
 242 +int lq_request_timer(unsigned int timer, unsigned int flag,
 243 +       unsigned long value, unsigned long arg1, unsigned long arg2)
 244 +{
 245 +       int ret = 0;
 246 +       unsigned int con_reg, irnen_reg;
 247 +       int n, X;
 248 +
 249 +       if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
 250 +               return -EINVAL;
 251 +
 252 +       printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
 253 +               timer, flag, value);
 254 +
 255 +       if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
 256 +               value &= 0xFFFF;
 257 +       else
 258 +               timer &= ~0x01;
 259 +
 260 +       mutex_lock(&timer_dev.gptu_mutex);
 261 +
 262 +       /*
 263 +        *  Allocate timer.
 264 +        */
 265 +       if (timer < FIRST_TIMER) {
 266 +               unsigned int mask;
 267 +               unsigned int shift;
 268 +               /* This takes care of TIMER1B which is the only choice for Voice TAPI system */
 269 +               unsigned int offset = TIMER2A;
 270 +
 271 +               /*
 272 +                *  Pick up a free timer.
 273 +                */
 274 +               if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
 275 +                       mask = 1 << offset;
 276 +                       shift = 1;
 277 +               } else {
 278 +                       mask = 3 << offset;
 279 +                       shift = 2;
 280 +               }
 281 +               for (timer = offset;
 282 +                    timer < offset + timer_dev.number_of_timers;
 283 +                    timer += shift, mask <<= shift)
 284 +                       if (!(timer_dev.occupation & mask)) {
 285 +                               timer_dev.occupation |= mask;
 286 +                               break;
 287 +                       }
 288 +               if (timer >= offset + timer_dev.number_of_timers) {
 289 +                       printk("failed![%d]\n", __LINE__);
 290 +                       mutex_unlock(&timer_dev.gptu_mutex);
 291 +                       return -EINVAL;
 292 +               } else
 293 +                       ret = timer;
 294 +       } else {
 295 +               register unsigned int mask;
 296 +
 297 +               /*
 298 +                *  Check if the requested timer is free.
 299 +                */
 300 +               mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
 301 +               if ((timer_dev.occupation & mask)) {
 302 +                       printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
 303 +                               __LINE__, mask, timer_dev.occupation);
 304 +                       mutex_unlock(&timer_dev.gptu_mutex);
 305 +                       return -EBUSY;
 306 +               } else {
 307 +                       timer_dev.occupation |= mask;
 308 +                       ret = 0;
 309 +               }
 310 +       }
 311 +
 312 +       /*
 313 +        *  Prepare control register value.
 314 +        */
 315 +       switch (TIMER_FLAG_MASK_EDGE(flag)) {
 316 +       default:
 317 +       case TIMER_FLAG_NONE_EDGE:
 318 +               con_reg = GPTU_CON_EDGE_SET(0x00);
 319 +               break;
 320 +       case TIMER_FLAG_RISE_EDGE:
 321 +               con_reg = GPTU_CON_EDGE_SET(0x01);
 322 +               break;
 323 +       case TIMER_FLAG_FALL_EDGE:
 324 +               con_reg = GPTU_CON_EDGE_SET(0x02);
 325 +               break;
 326 +       case TIMER_FLAG_ANY_EDGE:
 327 +               con_reg = GPTU_CON_EDGE_SET(0x03);
 328 +               break;
 329 +       }
 330 +       if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
 331 +               con_reg |=
 332 +                       TIMER_FLAG_MASK_SRC(flag) ==
 333 +                       TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
 334 +                       GPTU_CON_SRC_EXT_SET(0);
 335 +       else
 336 +               con_reg |=
 337 +                       TIMER_FLAG_MASK_SRC(flag) ==
 338 +                       TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
 339 +                       GPTU_CON_SRC_EG_SET(0);
 340 +       con_reg |=
 341 +               TIMER_FLAG_MASK_SYNC(flag) ==
 342 +               TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
 343 +               GPTU_CON_SYNC_SET(1);
 344 +       con_reg |=
 345 +               TIMER_FLAG_MASK_INVERT(flag) ==
 346 +               TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
 347 +       con_reg |=
 348 +               TIMER_FLAG_MASK_SIZE(flag) ==
 349 +               TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
 350 +               GPTU_CON_EXT_SET(1);
 351 +       con_reg |=
 352 +               TIMER_FLAG_MASK_STOP(flag) ==
 353 +               TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
 354 +       con_reg |=
 355 +               TIMER_FLAG_MASK_TYPE(flag) ==
 356 +               TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
 357 +               GPTU_CON_CNT_SET(1);
 358 +       con_reg |=
 359 +               TIMER_FLAG_MASK_DIR(flag) ==
 360 +               TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
 361 +
 362 +       /*
 363 +        *  Fill up running data.
 364 +        */
 365 +       timer_dev.timer[timer - FIRST_TIMER].flag = flag;
 366 +       timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
 367 +       timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
 368 +       if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
 369 +               timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
 370 +
 371 +       /*
 372 +        *  Enable GPTU module.
 373 +        */
 374 +       if (!timer_dev.f_gptu_on) {
 375 +               lq_enable_gptu();
 376 +               timer_dev.f_gptu_on = 1;
 377 +       }
 378 +
 379 +       /*
 380 +        *  Enable IRQ.
 381 +        */
 382 +       if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
 383 +               if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
 384 +                       timer_dev.timer[timer - FIRST_TIMER].arg1 =
 385 +                               (unsigned long) find_task_by_vpid((int) arg1);
 386 +
 387 +               irnen_reg = 1 << (timer - FIRST_TIMER);
 388 +
 389 +               if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
 390 +                   || (TIMER_FLAG_MASK_HANDLE(flag) ==
 391 +                       TIMER_FLAG_CALLBACK_IN_IRQ
 392 +                       && timer_dev.timer[timer - FIRST_TIMER].arg1)) {
 393 +                       enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
 394 +                       timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
 395 +               }
 396 +       } else
 397 +               irnen_reg = 0;
 398 +
 399 +       /*
 400 +        *  Write config register, reload value and enable interrupt.
 401 +        */
 402 +       n = timer >> 1;
 403 +       X = timer & 0x01;
 404 +       *LQ_GPTU_CON(n, X) = con_reg;
 405 +       *LQ_GPTU_RELOAD(n, X) = value;
 406 +       /* printk("reload value = %d\n", (u32)value); */
 407 +       *LQ_GPTU_IRNEN |= irnen_reg;
 408 +
 409 +       mutex_unlock(&timer_dev.gptu_mutex);
 410 +       printk("successful!\n");
 411 +       return ret;
 412 +}
 413 +EXPORT_SYMBOL(lq_request_timer);
 414 +
 415 +int lq_free_timer(unsigned int timer)
 416 +{
 417 +       unsigned int flag;
 418 +       unsigned int mask;
 419 +       int n, X;
 420 +
 421 +       if (!timer_dev.f_gptu_on)
 422 +               return -EINVAL;
 423 +
 424 +       if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
 425 +               return -EINVAL;
 426 +
 427 +       mutex_lock(&timer_dev.gptu_mutex);
 428 +
 429 +       flag = timer_dev.timer[timer - FIRST_TIMER].flag;
 430 +       if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
 431 +               timer &= ~0x01;
 432 +
 433 +       mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
 434 +       if (((timer_dev.occupation & mask) ^ mask)) {
 435 +               mutex_unlock(&timer_dev.gptu_mutex);
 436 +               return -EINVAL;
 437 +       }
 438 +
 439 +       n = timer >> 1;
 440 +       X = timer & 0x01;
 441 +
 442 +       if (GPTU_CON_EN(n, X))
 443 +               *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
 444 +
 445 +       *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
 446 +       *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
 447 +
 448 +       if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
 449 +               disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
 450 +               timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
 451 +       }
 452 +
 453 +       timer_dev.occupation &= ~mask;
 454 +       if (!timer_dev.occupation && timer_dev.f_gptu_on) {
 455 +               lq_disable_gptu();
 456 +               timer_dev.f_gptu_on = 0;
 457 +       }
 458 +
 459 +       mutex_unlock(&timer_dev.gptu_mutex);
 460 +
 461 +       return 0;
 462 +}
 463 +EXPORT_SYMBOL(lq_free_timer);
 464 +
 465 +int lq_start_timer(unsigned int timer, int is_resume)
 466 +{
 467 +       unsigned int flag;
 468 +       unsigned int mask;
 469 +       int n, X;
 470 +
 471 +       if (!timer_dev.f_gptu_on)
 472 +               return -EINVAL;
 473 +
 474 +       if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
 475 +               return -EINVAL;
 476 +
 477 +       mutex_lock(&timer_dev.gptu_mutex);
 478 +
 479 +       flag = timer_dev.timer[timer - FIRST_TIMER].flag;
 480 +       if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
 481 +               timer &= ~0x01;
 482 +
 483 +       mask = (TIMER_FLAG_MASK_SIZE(flag) ==
 484 +       TIMER_FLAG_16BIT ? 1 : 3) << timer;
 485 +       if (((timer_dev.occupation & mask) ^ mask)) {
 486 +               mutex_unlock(&timer_dev.gptu_mutex);
 487 +               return -EINVAL;
 488 +       }
 489 +
 490 +       n = timer >> 1;
 491 +       X = timer & 0x01;
 492 +
 493 +       *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
 494 +
 495 +       mutex_unlock(&timer_dev.gptu_mutex);
 496 +
 497 +       return 0;
 498 +}
 499 +EXPORT_SYMBOL(lq_start_timer);
 500 +
 501 +int lq_stop_timer(unsigned int timer)
 502 +{
 503 +       unsigned int flag;
 504 +       unsigned int mask;
 505 +       int n, X;
 506 +
 507 +       if (!timer_dev.f_gptu_on)
 508 +               return -EINVAL;
 509 +
 510 +       if (timer < FIRST_TIMER
 511 +           || timer >= FIRST_TIMER + timer_dev.number_of_timers)
 512 +               return -EINVAL;
 513 +
 514 +       mutex_lock(&timer_dev.gptu_mutex);
 515 +
 516 +       flag = timer_dev.timer[timer - FIRST_TIMER].flag;
 517 +       if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
 518 +               timer &= ~0x01;
 519 +
 520 +       mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
 521 +       if (((timer_dev.occupation & mask) ^ mask)) {
 522 +               mutex_unlock(&timer_dev.gptu_mutex);
 523 +               return -EINVAL;
 524 +       }
 525 +
 526 +       n = timer >> 1;
 527 +       X = timer & 0x01;
 528 +
 529 +       *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
 530 +
 531 +       mutex_unlock(&timer_dev.gptu_mutex);
 532 +
 533 +       return 0;
 534 +}
 535 +EXPORT_SYMBOL(lq_stop_timer);
 536 +
 537 +int lq_reset_counter_flags(u32 timer, u32 flags)
 538 +{
 539 +       unsigned int oflag;
 540 +       unsigned int mask, con_reg;
 541 +       int n, X;
 542 +
 543 +       if (!timer_dev.f_gptu_on)
 544 +               return -EINVAL;
 545 +
 546 +       if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
 547 +               return -EINVAL;
 548 +
 549 +       mutex_lock(&timer_dev.gptu_mutex);
 550 +
 551 +       oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
 552 +       if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
 553 +               timer &= ~0x01;
 554 +
 555 +       mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
 556 +       if (((timer_dev.occupation & mask) ^ mask)) {
 557 +               mutex_unlock(&timer_dev.gptu_mutex);
 558 +               return -EINVAL;
 559 +       }
 560 +
 561 +       switch (TIMER_FLAG_MASK_EDGE(flags)) {
 562 +       default:
 563 +       case TIMER_FLAG_NONE_EDGE:
 564 +               con_reg = GPTU_CON_EDGE_SET(0x00);
 565 +               break;
 566 +       case TIMER_FLAG_RISE_EDGE:
 567 +               con_reg = GPTU_CON_EDGE_SET(0x01);
 568 +               break;
 569 +       case TIMER_FLAG_FALL_EDGE:
 570 +               con_reg = GPTU_CON_EDGE_SET(0x02);
 571 +               break;
 572 +       case TIMER_FLAG_ANY_EDGE:
 573 +               con_reg = GPTU_CON_EDGE_SET(0x03);
 574 +               break;
 575 +       }
 576 +       if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
 577 +               con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
 578 +       else
 579 +               con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
 580 +       con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
 581 +       con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
 582 +       con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
 583 +       con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
 584 +       con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
 585 +       con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
 586 +
 587 +       timer_dev.timer[timer - FIRST_TIMER].flag = flags;
 588 +       if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
 589 +               timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
 590 +
 591 +       n = timer >> 1;
 592 +       X = timer & 0x01;
 593 +
 594 +       *LQ_GPTU_CON(n, X) = con_reg;
 595 +       smp_wmb();
 596 +       printk(KERN_INFO "[%s]: counter%d oflags %#x, nflags %#x, GPTU_CON %#x\n", __func__, timer, oflag, flags, *LQ_GPTU_CON(n, X));
 597 +       mutex_unlock(&timer_dev.gptu_mutex);
 598 +       return 0;
 599 +}
 600 +EXPORT_SYMBOL(lq_reset_counter_flags);
 601 +
 602 +int lq_get_count_value(unsigned int timer, unsigned long *value)
 603 +{
 604 +       unsigned int flag;
 605 +       unsigned int mask;
 606 +       int n, X;
 607 +
 608 +       if (!timer_dev.f_gptu_on)
 609 +               return -EINVAL;
 610 +
 611 +       if (timer < FIRST_TIMER
 612 +           || timer >= FIRST_TIMER + timer_dev.number_of_timers)
 613 +               return -EINVAL;
 614 +
 615 +       mutex_lock(&timer_dev.gptu_mutex);
 616 +
 617 +       flag = timer_dev.timer[timer - FIRST_TIMER].flag;
 618 +       if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
 619 +               timer &= ~0x01;
 620 +
 621 +       mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
 622 +       if (((timer_dev.occupation & mask) ^ mask)) {
 623 +               mutex_unlock(&timer_dev.gptu_mutex);
 624 +               return -EINVAL;
 625 +       }
 626 +
 627 +       n = timer >> 1;
 628 +       X = timer & 0x01;
 629 +
 630 +       *value = *LQ_GPTU_COUNT(n, X);
 631 +
 632 +       mutex_unlock(&timer_dev.gptu_mutex);
 633 +
 634 +       return 0;
 635 +}
 636 +EXPORT_SYMBOL(lq_get_count_value);
 637 +
 638 +u32 lq_cal_divider(unsigned long freq)
 639 +{
 640 +       u64 module_freq, fpi = ltq_get_fpi_bus_clock(2);
 641 +       u32 clock_divider = 1;
 642 +       module_freq = fpi * 1000;
 643 +       do_div(module_freq, clock_divider * freq);
 644 +       return module_freq;
 645 +}
 646 +EXPORT_SYMBOL(lq_cal_divider);
 647 +
 648 +int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
 649 +       int is_ext_src, unsigned int handle_flag, unsigned long arg1,
 650 +       unsigned long arg2)
 651 +{
 652 +       unsigned long divider;
 653 +       unsigned int flag;
 654 +
 655 +       divider = lq_cal_divider(freq);
 656 +       if (divider == 0)
 657 +               return -EINVAL;
 658 +       flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
 659 +               | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
 660 +               | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
 661 +               | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
 662 +               | TIMER_FLAG_MASK_HANDLE(handle_flag);
 663 +
 664 +       printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
 665 +               timer, freq, divider);
 666 +       return lq_request_timer(timer, flag, divider, arg1, arg2);
 667 +}
 668 +EXPORT_SYMBOL(lq_set_timer);
 669 +
 670 +int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
 671 +       unsigned long arg1, unsigned long arg2)
 672 +{
 673 +       printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
 674 +       return lq_request_timer(timer, flag, reload, arg1, arg2);
 675 +}
 676 +EXPORT_SYMBOL(lq_set_counter);
 677 +
 678 +static long gptu_ioctl(struct file *file, unsigned int cmd,
 679 +       unsigned long arg)
 680 +{
 681 +       int ret;
 682 +       struct gptu_ioctl_param param;
 683 +
 684 +       if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
 685 +               return -EFAULT;
 686 +       copy_from_user(&param, (void *) arg, sizeof(param));
 687 +
 688 +       if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
 689 +              || GPTU_SET_COUNTER) && param.timer < 2)
 690 +            || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
 691 +           && !access_ok(VERIFY_WRITE, arg,
 692 +                          sizeof(struct gptu_ioctl_param)))
 693 +               return -EFAULT;
 694 +
 695 +       switch (cmd) {
 696 +       case GPTU_REQUEST_TIMER:
 697 +               ret = lq_request_timer(param.timer, param.flag, param.value,
 698 +                                    (unsigned long) param.pid,
 699 +                                    (unsigned long) param.sig);
 700 +               if (ret > 0) {
 701 +                       copy_to_user(&((struct gptu_ioctl_param *) arg)->
 702 +                                     timer, &ret, sizeof(&ret));
 703 +                       ret = 0;
 704 +               }
 705 +               break;
 706 +       case GPTU_FREE_TIMER:
 707 +               ret = lq_free_timer(param.timer);
 708 +               break;
 709 +       case GPTU_START_TIMER:
 710 +               ret = lq_start_timer(param.timer, param.flag);
 711 +               break;
 712 +       case GPTU_STOP_TIMER:
 713 +               ret = lq_stop_timer(param.timer);
 714 +               break;
 715 +       case GPTU_GET_COUNT_VALUE:
 716 +               ret = lq_get_count_value(param.timer, &param.value);
 717 +               if (!ret)
 718 +                       copy_to_user(&((struct gptu_ioctl_param *) arg)->
 719 +                                     value, &param.value,
 720 +                                     sizeof(param.value));
 721 +               break;
 722 +       case GPTU_CALCULATE_DIVIDER:
 723 +               param.value = lq_cal_divider(param.value);
 724 +               if (param.value == 0)
 725 +                       ret = -EINVAL;
 726 +               else {
 727 +                       copy_to_user(&((struct gptu_ioctl_param *) arg)->
 728 +                                     value, &param.value,
 729 +                                     sizeof(param.value));
 730 +                       ret = 0;
 731 +               }
 732 +               break;
 733 +       case GPTU_SET_TIMER:
 734 +               ret = lq_set_timer(param.timer, param.value,
 735 +                                TIMER_FLAG_MASK_STOP(param.flag) !=
 736 +                                TIMER_FLAG_ONCE ? 1 : 0,
 737 +                                TIMER_FLAG_MASK_SRC(param.flag) ==
 738 +                                TIMER_FLAG_EXT_SRC ? 1 : 0,
 739 +                                TIMER_FLAG_MASK_HANDLE(param.flag) ==
 740 +                                TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
 741 +                                TIMER_FLAG_NO_HANDLE,
 742 +                                (unsigned long) param.pid,
 743 +                                (unsigned long) param.sig);
 744 +               if (ret > 0) {
 745 +                       copy_to_user(&((struct gptu_ioctl_param *) arg)->
 746 +                                     timer, &ret, sizeof(&ret));
 747 +                       ret = 0;
 748 +               }
 749 +               break;
 750 +       case GPTU_SET_COUNTER:
 751 +               lq_set_counter(param.timer, param.flag, param.value, 0, 0);
 752 +               if (ret > 0) {
 753 +                       copy_to_user(&((struct gptu_ioctl_param *) arg)->
 754 +                                     timer, &ret, sizeof(&ret));
 755 +                       ret = 0;
 756 +               }
 757 +               break;
 758 +       default:
 759 +               ret = -ENOTTY;
 760 +       }
 761 +
 762 +       return ret;
 763 +}
 764 +
 765 +static int gptu_open(struct inode *inode, struct file *file)
 766 +{
 767 +       return 0;
 768 +}
 769 +
 770 +static int gptu_release(struct inode *inode, struct file *file)
 771 +{
 772 +       return 0;
 773 +}
 774 +
 775 +int __init lq_gptu_init(void)
 776 +{
 777 +       int ret;
 778 +       unsigned int i;
 779 +
 780 +       ltq_w32(0, LQ_GPTU_IRNEN);
 781 +       ltq_w32(0xfff, LQ_GPTU_IRNCR);
 782 +
 783 +       memset(&timer_dev, 0, sizeof(timer_dev));
 784 +       mutex_init(&timer_dev.gptu_mutex);
 785 +
 786 +       lq_enable_gptu();
 787 +       timer_dev.number_of_timers = GPTU_ID_CFG * 2;
 788 +       lq_disable_gptu();
 789 +       if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
 790 +               timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
 791 +       printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
 792 +
 793 +       ret = misc_register(&gptu_miscdev);
 794 +       if (ret) {
 795 +               printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
 796 +               return ret;
 797 +       } else {
 798 +               printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
 799 +       }
 800 +
 801 +       for (i = 0; i < timer_dev.number_of_timers; i++) {
 802 +               ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
 803 +               if (ret) {
 804 +                       for (; i >= 0; i--)
 805 +                               free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
 806 +                       misc_deregister(&gptu_miscdev);
 807 +                       printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
 808 +                       return ret;
 809 +               } else {
 810 +                       timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
 811 +                       disable_irq(timer_dev.timer[i].irq);
 812 +                       printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
 813 +               }
 814 +       }
 815 +
 816 +       return 0;
 817 +}
 818 +
 819 +void __exit lq_gptu_exit(void)
 820 +{
 821 +       unsigned int i;
 822 +
 823 +       for (i = 0; i < timer_dev.number_of_timers; i++) {
 824 +               if (timer_dev.timer[i].f_irq_on)
 825 +                       disable_irq(timer_dev.timer[i].irq);
 826 +               free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
 827 +       }
 828 +       lq_disable_gptu();
 829 +       misc_deregister(&gptu_miscdev);
 830 +}
 831 +
 832 +module_init(lq_gptu_init);
 833 +module_exit(lq_gptu_exit);
 834 --- /dev/null
 835 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
 836 @@ -0,0 +1,155 @@
 837 +#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
 838 +#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
 839 +
 840 +
 841 +/******************************************************************************
 842 +       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
 843 +
 844 +                               No Warranty
 845 +   Because the program is licensed free of charge, there is no warranty for
 846 +   the program, to the extent permitted by applicable law.  Except when
 847 +   otherwise stated in writing the copyright holders and/or other parties
 848 +   provide the program "as is" without warranty of any kind, either
 849 +   expressed or implied, including, but not limited to, the implied
 850 +   warranties of merchantability and fitness for a particular purpose. The
 851 +   entire risk as to the quality and performance of the program is with
 852 +   you.  should the program prove defective, you assume the cost of all
 853 +   necessary servicing, repair or correction.
 854 +
 855 +   In no event unless required by applicable law or agreed to in writing
 856 +   will any copyright holder, or any other party who may modify and/or
 857 +   redistribute the program as permitted above, be liable to you for
 858 +   damages, including any general, special, incidental or consequential
 859 +   damages arising out of the use or inability to use the program
 860 +   (including but not limited to loss of data or data being rendered
 861 +   inaccurate or losses sustained by you or third parties or a failure of
 862 +   the program to operate with any other programs), even if such holder or
 863 +   other party has been advised of the possibility of such damages.
 864 +******************************************************************************/
 865 +
 866 +
 867 +/*
 868 + * ####################################
 869 + *              Definition
 870 + * ####################################
 871 + */
 872 +
 873 +/*
 874 + *  Available Timer/Counter Index
 875 + */
 876 +#define TIMER(n, X)                     (n * 2 + (X ? 1 : 0))
 877 +#define TIMER_ANY                       0x00
 878 +#define TIMER1A                         TIMER(1, 0)
 879 +#define TIMER1B                         TIMER(1, 1)
 880 +#define TIMER2A                         TIMER(2, 0)
 881 +#define TIMER2B                         TIMER(2, 1)
 882 +#define TIMER3A                         TIMER(3, 0)
 883 +#define TIMER3B                         TIMER(3, 1)
 884 +
 885 +/*
 886 + *  Flag of Timer/Counter
 887 + *  These flags specify the way in which timer is configured.
 888 + */
 889 +/*  Bit size of timer/counter.                      */
 890 +#define TIMER_FLAG_16BIT                0x0000
 891 +#define TIMER_FLAG_32BIT                0x0001
 892 +/*  Switch between timer and counter.               */
 893 +#define TIMER_FLAG_TIMER                0x0000
 894 +#define TIMER_FLAG_COUNTER              0x0002
 895 +/*  Stop or continue when overflowing/underflowing. */
 896 +#define TIMER_FLAG_ONCE                 0x0000
 897 +#define TIMER_FLAG_CYCLIC               0x0004
 898 +/*  Count up or counter down.                       */
 899 +#define TIMER_FLAG_UP                   0x0000
 900 +#define TIMER_FLAG_DOWN                 0x0008
 901 +/*  Count on specific level or edge.                */
 902 +#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
 903 +#define TIMER_FLAG_LOW_LEVEL_SENSITIVE  0x0040
 904 +#define TIMER_FLAG_RISE_EDGE            0x0010
 905 +#define TIMER_FLAG_FALL_EDGE            0x0020
 906 +#define TIMER_FLAG_ANY_EDGE             0x0030
 907 +/*  Signal is syncronous to module clock or not.    */
 908 +#define TIMER_FLAG_UNSYNC               0x0000
 909 +#define TIMER_FLAG_SYNC                 0x0080
 910 +/*  Different interrupt handle type.                */
 911 +#define TIMER_FLAG_NO_HANDLE            0x0000
 912 +#if defined(__KERNEL__)
 913 +    #define TIMER_FLAG_CALLBACK_IN_IRQ  0x0100
 914 +#endif  //  defined(__KERNEL__)
 915 +#define TIMER_FLAG_SIGNAL               0x0300
 916 +/*  Internal clock source or external clock source  */
 917 +#define TIMER_FLAG_INT_SRC              0x0000
 918 +#define TIMER_FLAG_EXT_SRC              0x1000
 919 +
 920 +
 921 +/*
 922 + *  ioctl Command
 923 + */
 924 +#define GPTU_REQUEST_TIMER              0x01    /*  General method to setup timer/counter.  */
 925 +#define GPTU_FREE_TIMER                 0x02    /*  Free timer/counter.                     */
 926 +#define GPTU_START_TIMER                0x03    /*  Start or resume timer/counter.          */
 927 +#define GPTU_STOP_TIMER                 0x04    /*  Suspend timer/counter.                  */
 928 +#define GPTU_GET_COUNT_VALUE            0x05    /*  Get current count value.                */
 929 +#define GPTU_CALCULATE_DIVIDER          0x06    /*  Calculate timer divider from given freq.*/
 930 +#define GPTU_SET_TIMER                  0x07    /*  Simplified method to setup timer.       */
 931 +#define GPTU_SET_COUNTER                0x08    /*  Simplified method to setup counter.     */
 932 +
 933 +/*
 934 + *  Data Type Used to Call ioctl
 935 + */
 936 +struct gptu_ioctl_param {
 937 +    unsigned int                        timer;  /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
 938 +                                                 *  GPTU_SET_COUNTER, this field is ID of expected      *
 939 +                                                 *  timer/counter. If it's zero, a timer/counter would  *
 940 +                                                 *  be dynamically allocated and ID would be stored in  *
 941 +                                                 *  this field.                                         *
 942 +                                                 *  In command GPTU_GET_COUNT_VALUE, this field is      *
 943 +                                                 *  ignored.                                            *
 944 +                                                 *  In other command, this field is ID of timer/counter *
 945 +                                                 *  allocated.                                          */
 946 +    unsigned int                        flag;   /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
 947 +                                                 *  GPTU_SET_COUNTER, this field contains flags to      *
 948 +                                                 *  specify how to configure timer/counter.             *
 949 +                                                 *  In command GPTU_START_TIMER, zero indicate start    *
 950 +                                                 *  and non-zero indicate resume timer/counter.         *
 951 +                                                 *  In other command, this field is ignored.            */
 952 +    unsigned long                       value;  /*  In command GPTU_REQUEST_TIMER, this field contains  *
 953 +                                                 *  init/reload value.                                  *
 954 +                                                 *  In command GPTU_SET_TIMER, this field contains      *
 955 +                                                 *  frequency (0.001Hz) of timer.                       *
 956 +                                                 *  In command GPTU_GET_COUNT_VALUE, current count      *
 957 +                                                 *  value would be stored in this field.                *
 958 +                                                 *  In command GPTU_CALCULATE_DIVIDER, this field       *
 959 +                                                 *  contains frequency wanted, and after calculation,   *
 960 +                                                 *  divider would be stored in this field to overwrite  *
 961 +                                                 *  the frequency.                                      *
 962 +                                                 *  In other command, this field is ignored.            */
 963 +    int                                 pid;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
 964 +                                                 *  if signal is required, this field contains process  *
 965 +                                                 *  ID to which signal would be sent.                   *
 966 +                                                 *  In other command, this field is ignored.            */
 967 +    int                                 sig;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
 968 +                                                 *  if signal is required, this field contains signal   *
 969 +                                                 *  number which would be sent.                         *
 970 +                                                 *  In other command, this field is ignored.            */
 971 +};
 972 +
 973 +/*
 974 + * ####################################
 975 + *              Data Type
 976 + * ####################################
 977 + */
 978 +typedef void (*timer_callback)(unsigned long arg);
 979 +
 980 +extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
 981 +extern int lq_free_timer(unsigned int);
 982 +extern int lq_start_timer(unsigned int, int);
 983 +extern int lq_stop_timer(unsigned int);
 984 +extern int lq_reset_counter_flags(u32 timer, u32 flags);
 985 +extern int lq_get_count_value(unsigned int, unsigned long *);
 986 +extern u32 lq_cal_divider(unsigned long);
 987 +extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
 988 +extern int lq_set_counter(unsigned int timer, unsigned int flag,
 989 +       u32 reload, unsigned long arg1, unsigned long arg2);
 990 +
 991 +#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
 992 --- a/arch/mips/lantiq/xway/Makefile
 993 +++ b/arch/mips/lantiq/xway/Makefile
 994 @@ -1,4 +1,4 @@
 995 -obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
 996 +obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o timer.o
 997
 998  obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
 999  obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o