projects / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
[malta] update to 3.2
[openwrt.git] / target / linux / generic / patches-2.6.39 / 020-ssb_update.patch
1 --- a/drivers/ssb/driver_chipcommon.c
2 +++ b/drivers/ssb/driver_chipcommon.c
3 @@ -3,7 +3,7 @@
4 * Broadcom ChipCommon core driver
5 *
6 * Copyright 2005, Broadcom Corporation
7 - * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
8 + * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
9 *
10 * Licensed under the GNU/GPL. See COPYING for details.
11 */
12 @@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb
13 if (!ccdev)
14 return;
15 bus = ccdev->bus;
16 +
17 + /* We support SLOW only on 6..9 */
18 + if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW)
19 + mode = SSB_CLKMODE_DYNAMIC;
20 +
21 + if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
22 + return; /* PMU controls clockmode, separated function needed */
23 + SSB_WARN_ON(ccdev->id.revision >= 20);
24 +
25 /* chipcommon cores prior to rev6 don't support dynamic clock control */
26 if (ccdev->id.revision < 6)
27 return;
28 - /* chipcommon cores rev10 are a whole new ball game */
29 +
30 + /* ChipCommon cores rev10+ need testing */
31 if (ccdev->id.revision >= 10)
32 return;
33 +
34 if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
35 return;
36
37 switch (mode) {
38 - case SSB_CLKMODE_SLOW:
39 + case SSB_CLKMODE_SLOW: /* For revs 6..9 only */
40 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
41 tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
42 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
43 break;
44 case SSB_CLKMODE_FAST:
45 - ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
46 - tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
47 - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
48 - tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
49 - chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
50 + if (ccdev->id.revision < 10) {
51 + ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
52 + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
53 + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
54 + tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
55 + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
56 + } else {
57 + chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
58 + (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) |
59 + SSB_CHIPCO_SYSCLKCTL_FORCEHT));
60 + /* udelay(150); TODO: not available in early init */
61 + }
62 break;
63 case SSB_CLKMODE_DYNAMIC:
64 - tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
65 - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
66 - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
67 - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
68 - if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
69 - tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
70 - chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
71 -
72 - /* for dynamic control, we have to release our xtal_pu "force on" */
73 - if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
74 - ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
75 + if (ccdev->id.revision < 10) {
76 + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
77 + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
78 + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
79 + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
80 + if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) !=
81 + SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
82 + tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
83 + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
84 +
85 + /* For dynamic control, we have to release our xtal_pu
86 + * "force on" */
87 + if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
88 + ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
89 + } else {
90 + chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
91 + (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
92 + ~SSB_CHIPCO_SYSCLKCTL_FORCEHT));
93 + }
94 break;
95 default:
96 SSB_WARN_ON(1);
97 @@ -260,6 +286,12 @@ void ssb_chipcommon_init(struct ssb_chip
98 if (cc->dev->id.revision >= 11)
99 cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
100 ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
101 +
102 + if (cc->dev->id.revision >= 20) {
103 + chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
104 + chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0);
105 + }
106 +
107 ssb_pmu_init(cc);
108 chipco_powercontrol_init(cc);
109 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
110 --- a/drivers/ssb/driver_chipcommon_pmu.c
111 +++ b/drivers/ssb/driver_chipcommon_pmu.c
112 @@ -2,7 +2,7 @@
113 * Sonics Silicon Backplane
114 * Broadcom ChipCommon Power Management Unit driver
115 *
116 - * Copyright 2009, Michael Buesch <mb@bu3sch.de>
117 + * Copyright 2009, Michael Buesch <m@bues.ch>
118 * Copyright 2007, Broadcom Corporation
119 *
120 * Licensed under the GNU/GPL. See COPYING for details.
121 @@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc
122 u32 min_msk = 0, max_msk = 0;
123 unsigned int i;
124 const struct pmu_res_updown_tab_entry *updown_tab = NULL;
125 - unsigned int updown_tab_size;
126 + unsigned int updown_tab_size = 0;
127 const struct pmu_res_depend_tab_entry *depend_tab = NULL;
128 - unsigned int depend_tab_size;
129 + unsigned int depend_tab_size = 0;
130
131 switch (bus->chip_id) {
132 case 0x4312:
133 + min_msk = 0xCBB;
134 + break;
135 case 0x4322:
136 /* We keep the default settings:
137 * min_msk = 0xCBB
138 --- a/drivers/ssb/driver_gige.c
139 +++ b/drivers/ssb/driver_gige.c
140 @@ -3,7 +3,7 @@
141 * Broadcom Gigabit Ethernet core driver
142 *
143 * Copyright 2008, Broadcom Corporation
144 - * Copyright 2008, Michael Buesch <mb@bu3sch.de>
145 + * Copyright 2008, Michael Buesch <m@bues.ch>
146 *
147 * Licensed under the GNU/GPL. See COPYING for details.
148 */
149 @@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige
150 gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
151 }
152
153 -static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
154 - int reg, int size, u32 *val)
155 +static int __devinit ssb_gige_pci_read_config(struct pci_bus *bus,
156 + unsigned int devfn, int reg,
157 + int size, u32 *val)
158 {
159 struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
160 unsigned long flags;
161 @@ -136,8 +137,9 @@ static int ssb_gige_pci_read_config(stru
162 return PCIBIOS_SUCCESSFUL;
163 }
164
165 -static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
166 - int reg, int size, u32 val)
167 +static int __devinit ssb_gige_pci_write_config(struct pci_bus *bus,
168 + unsigned int devfn, int reg,
169 + int size, u32 val)
170 {
171 struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
172 unsigned long flags;
173 @@ -166,7 +168,8 @@ static int ssb_gige_pci_write_config(str
174 return PCIBIOS_SUCCESSFUL;
175 }
176
177 -static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
178 +static int __devinit ssb_gige_probe(struct ssb_device *sdev,
179 + const struct ssb_device_id *id)
180 {
181 struct ssb_gige *dev;
182 u32 base, tmslow, tmshigh;
183 --- a/drivers/ssb/driver_pcicore.c
184 +++ b/drivers/ssb/driver_pcicore.c
185 @@ -3,7 +3,7 @@
186 * Broadcom PCI-core driver
187 *
188 * Copyright 2005, Broadcom Corporation
189 - * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
190 + * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
191 *
192 * Licensed under the GNU/GPL. See COPYING for details.
193 */
194 @@ -15,6 +15,11 @@
195
196 #include "ssb_private.h"
197
198 +static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
199 +static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
200 +static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
201 +static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
202 + u8 address, u16 data);
203
204 static inline
205 u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
206 @@ -309,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st
207 return ssb_mips_irq(extpci_core->dev) + 2;
208 }
209
210 -static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
211 +static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
212 {
213 u32 val;
214
215 @@ -374,7 +379,7 @@ static void ssb_pcicore_init_hostmode(st
216 register_pci_controller(&ssb_pcicore_controller);
217 }
218
219 -static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
220 +static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc)
221 {
222 struct ssb_bus *bus = pc->dev->bus;
223 u16 chipid_top;
224 @@ -403,25 +408,137 @@ static int pcicore_is_in_hostmode(struct
225 }
226 #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
227
228 +/**************************************************
229 + * Workarounds.
230 + **************************************************/
231 +
232 +static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc)
233 +{
234 + u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
235 + if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
236 + tmp &= ~0xF000;
237 + tmp |= (pc->dev->core_index << 12);
238 + pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp);
239 + }
240 +}
241 +
242 +static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc)
243 +{
244 + return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
245 +}
246 +
247 +static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc)
248 +{
249 + const u8 serdes_pll_device = 0x1D;
250 + const u8 serdes_rx_device = 0x1F;
251 + u16 tmp;
252 +
253 + ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
254 + ssb_pcicore_polarity_workaround(pc));
255 + tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
256 + if (tmp & 0x4000)
257 + ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
258 +}
259 +
260 +static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc)
261 +{
262 + struct ssb_device *pdev = pc->dev;
263 + struct ssb_bus *bus = pdev->bus;
264 + u32 tmp;
265 +
266 + tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
267 + tmp |= SSB_PCICORE_SBTOPCI_PREF;
268 + tmp |= SSB_PCICORE_SBTOPCI_BURST;
269 + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
270 +
271 + if (pdev->id.revision < 5) {
272 + tmp = ssb_read32(pdev, SSB_IMCFGLO);
273 + tmp &= ~SSB_IMCFGLO_SERTO;
274 + tmp |= 2;
275 + tmp &= ~SSB_IMCFGLO_REQTO;
276 + tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
277 + ssb_write32(pdev, SSB_IMCFGLO, tmp);
278 + ssb_commit_settings(bus);
279 + } else if (pdev->id.revision >= 11) {
280 + tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
281 + tmp |= SSB_PCICORE_SBTOPCI_MRM;
282 + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
283 + }
284 +}
285 +
286 +static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
287 +{
288 + u32 tmp;
289 + u8 rev = pc->dev->id.revision;
290 +
291 + if (rev == 0 || rev == 1) {
292 + /* TLP Workaround register. */
293 + tmp = ssb_pcie_read(pc, 0x4);
294 + tmp |= 0x8;
295 + ssb_pcie_write(pc, 0x4, tmp);
296 + }
297 + if (rev == 1) {
298 + /* DLLP Link Control register. */
299 + tmp = ssb_pcie_read(pc, 0x100);
300 + tmp |= 0x40;
301 + ssb_pcie_write(pc, 0x100, tmp);
302 + }
303 +
304 + if (rev == 0) {
305 + const u8 serdes_rx_device = 0x1F;
306 +
307 + ssb_pcie_mdio_write(pc, serdes_rx_device,
308 + 2 /* Timer */, 0x8128);
309 + ssb_pcie_mdio_write(pc, serdes_rx_device,
310 + 6 /* CDR */, 0x0100);
311 + ssb_pcie_mdio_write(pc, serdes_rx_device,
312 + 7 /* CDR BW */, 0x1466);
313 + } else if (rev == 3 || rev == 4 || rev == 5) {
314 + /* TODO: DLLP Power Management Threshold */
315 + ssb_pcicore_serdes_workaround(pc);
316 + /* TODO: ASPM */
317 + } else if (rev == 7) {
318 + /* TODO: No PLL down */
319 + }
320 +
321 + if (rev >= 6) {
322 + /* Miscellaneous Configuration Fixup */
323 + tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5));
324 + if (!(tmp & 0x8000))
325 + pcicore_write16(pc, SSB_PCICORE_SPROM(5),
326 + tmp | 0x8000);
327 + }
328 +}
329
330 /**************************************************
331 * Generic and Clientmode operation code.
332 **************************************************/
333
334 -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
335 +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
336 {
337 + struct ssb_device *pdev = pc->dev;
338 + struct ssb_bus *bus = pdev->bus;
339 +
340 + if (bus->bustype == SSB_BUSTYPE_PCI)
341 + ssb_pcicore_fix_sprom_core_index(pc);
342 +
343 /* Disable PCI interrupts. */
344 - ssb_write32(pc->dev, SSB_INTVEC, 0);
345 + ssb_write32(pdev, SSB_INTVEC, 0);
346 +
347 + /* Additional PCIe always once-executed workarounds */
348 + if (pc->dev->id.coreid == SSB_DEV_PCIE) {
349 + ssb_pcicore_serdes_workaround(pc);
350 + /* TODO: ASPM */
351 + /* TODO: Clock Request Update */
352 + }
353 }
354
355 -void ssb_pcicore_init(struct ssb_pcicore *pc)
356 +void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
357 {
358 struct ssb_device *dev = pc->dev;
359 - struct ssb_bus *bus;
360
361 if (!dev)
362 return;
363 - bus = dev->bus;
364 if (!ssb_device_is_enabled(dev))
365 ssb_device_enable(dev, 0);
366
367 @@ -446,11 +563,35 @@ static void ssb_pcie_write(struct ssb_pc
368 pcicore_write32(pc, 0x134, data);
369 }
370
371 -static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
372 - u8 address, u16 data)
373 +static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy)
374 +{
375 + const u16 mdio_control = 0x128;
376 + const u16 mdio_data = 0x12C;
377 + u32 v;
378 + int i;
379 +
380 + v = (1 << 30); /* Start of Transaction */
381 + v |= (1 << 28); /* Write Transaction */
382 + v |= (1 << 17); /* Turnaround */
383 + v |= (0x1F << 18);
384 + v |= (phy << 4);
385 + pcicore_write32(pc, mdio_data, v);
386 +
387 + udelay(10);
388 + for (i = 0; i < 200; i++) {
389 + v = pcicore_read32(pc, mdio_control);
390 + if (v & 0x100 /* Trans complete */)
391 + break;
392 + msleep(1);
393 + }
394 +}
395 +
396 +static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address)
397 {
398 const u16 mdio_control = 0x128;
399 const u16 mdio_data = 0x12C;
400 + int max_retries = 10;
401 + u16 ret = 0;
402 u32 v;
403 int i;
404
405 @@ -458,46 +599,68 @@ static void ssb_pcie_mdio_write(struct s
406 v |= 0x2; /* MDIO Clock Divisor */
407 pcicore_write32(pc, mdio_control, v);
408
409 + if (pc->dev->id.revision >= 10) {
410 + max_retries = 200;
411 + ssb_pcie_mdio_set_phy(pc, device);
412 + }
413 +
414 v = (1 << 30); /* Start of Transaction */
415 - v |= (1 << 28); /* Write Transaction */
416 + v |= (1 << 29); /* Read Transaction */
417 v |= (1 << 17); /* Turnaround */
418 - v |= (u32)device << 22;
419 + if (pc->dev->id.revision < 10)
420 + v |= (u32)device << 22;
421 v |= (u32)address << 18;
422 - v |= data;
423 pcicore_write32(pc, mdio_data, v);
424 /* Wait for the device to complete the transaction */
425 udelay(10);
426 - for (i = 0; i < 10; i++) {
427 + for (i = 0; i < max_retries; i++) {
428 v = pcicore_read32(pc, mdio_control);
429 - if (v & 0x100 /* Trans complete */)
430 + if (v & 0x100 /* Trans complete */) {
431 + udelay(10);
432 + ret = pcicore_read32(pc, mdio_data);
433 break;
434 + }
435 msleep(1);
436 }
437 pcicore_write32(pc, mdio_control, 0);
438 + return ret;
439 }
440
441 -static void ssb_broadcast_value(struct ssb_device *dev,
442 - u32 address, u32 data)
443 +static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
444 + u8 address, u16 data)
445 {
446 - /* This is used for both, PCI and ChipCommon core, so be careful. */
447 - BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
448 - BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
449 + const u16 mdio_control = 0x128;
450 + const u16 mdio_data = 0x12C;
451 + int max_retries = 10;
452 + u32 v;
453 + int i;
454
455 - ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
456 - ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
457 - ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
458 - ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
459 -}
460 + v = 0x80; /* Enable Preamble Sequence */
461 + v |= 0x2; /* MDIO Clock Divisor */
462 + pcicore_write32(pc, mdio_control, v);
463
464 -static void ssb_commit_settings(struct ssb_bus *bus)
465 -{
466 - struct ssb_device *dev;
467 + if (pc->dev->id.revision >= 10) {
468 + max_retries = 200;
469 + ssb_pcie_mdio_set_phy(pc, device);
470 + }
471
472 - dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
473 - if (WARN_ON(!dev))
474 - return;
475 - /* This forces an update of the cached registers. */
476 - ssb_broadcast_value(dev, 0xFD8, 0);
477 + v = (1 << 30); /* Start of Transaction */
478 + v |= (1 << 28); /* Write Transaction */
479 + v |= (1 << 17); /* Turnaround */
480 + if (pc->dev->id.revision < 10)
481 + v |= (u32)device << 22;
482 + v |= (u32)address << 18;
483 + v |= data;
484 + pcicore_write32(pc, mdio_data, v);
485 + /* Wait for the device to complete the transaction */
486 + udelay(10);
487 + for (i = 0; i < max_retries; i++) {
488 + v = pcicore_read32(pc, mdio_control);
489 + if (v & 0x100 /* Trans complete */)
490 + break;
491 + msleep(1);
492 + }
493 + pcicore_write32(pc, mdio_control, 0);
494 }
495
496 int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
497 @@ -550,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc
498 if (pc->setup_done)
499 goto out;
500 if (pdev->id.coreid == SSB_DEV_PCI) {
501 - tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
502 - tmp |= SSB_PCICORE_SBTOPCI_PREF;
503 - tmp |= SSB_PCICORE_SBTOPCI_BURST;
504 - pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
505 -
506 - if (pdev->id.revision < 5) {
507 - tmp = ssb_read32(pdev, SSB_IMCFGLO);
508 - tmp &= ~SSB_IMCFGLO_SERTO;
509 - tmp |= 2;
510 - tmp &= ~SSB_IMCFGLO_REQTO;
511 - tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
512 - ssb_write32(pdev, SSB_IMCFGLO, tmp);
513 - ssb_commit_settings(bus);
514 - } else if (pdev->id.revision >= 11) {
515 - tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
516 - tmp |= SSB_PCICORE_SBTOPCI_MRM;
517 - pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
518 - }
519 + ssb_pcicore_pci_setup_workarounds(pc);
520 } else {
521 WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
522 - //TODO: Better make defines for all these magic PCIE values.
523 - if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
524 - /* TLP Workaround register. */
525 - tmp = ssb_pcie_read(pc, 0x4);
526 - tmp |= 0x8;
527 - ssb_pcie_write(pc, 0x4, tmp);
528 - }
529 - if (pdev->id.revision == 0) {
530 - const u8 serdes_rx_device = 0x1F;
531 -
532 - ssb_pcie_mdio_write(pc, serdes_rx_device,
533 - 2 /* Timer */, 0x8128);
534 - ssb_pcie_mdio_write(pc, serdes_rx_device,
535 - 6 /* CDR */, 0x0100);
536 - ssb_pcie_mdio_write(pc, serdes_rx_device,
537 - 7 /* CDR BW */, 0x1466);
538 - } else if (pdev->id.revision == 1) {
539 - /* DLLP Link Control register. */
540 - tmp = ssb_pcie_read(pc, 0x100);
541 - tmp |= 0x40;
542 - ssb_pcie_write(pc, 0x100, tmp);
543 - }
544 + ssb_pcicore_pcie_setup_workarounds(pc);
545 }
546 pc->setup_done = 1;
547 out:
548 --- a/drivers/ssb/main.c
549 +++ b/drivers/ssb/main.c
550 @@ -3,7 +3,7 @@
551 * Subsystem core
552 *
553 * Copyright 2005, Broadcom Corporation
554 - * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
555 + * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
556 *
557 * Licensed under the GNU/GPL. See COPYING for details.
558 */
559 @@ -12,6 +12,7 @@
560
561 #include <linux/delay.h>
562 #include <linux/io.h>
563 +#include <linux/module.h>
564 #include <linux/ssb/ssb.h>
565 #include <linux/ssb/ssb_regs.h>
566 #include <linux/ssb/ssb_driver_gige.h>
567 @@ -557,7 +558,7 @@ error:
568 }
569
570 /* Needs ssb_buses_lock() */
571 -static int ssb_attach_queued_buses(void)
572 +static int __devinit ssb_attach_queued_buses(void)
573 {
574 struct ssb_bus *bus, *n;
575 int err = 0;
576 @@ -768,9 +769,9 @@ out:
577 return err;
578 }
579
580 -static int ssb_bus_register(struct ssb_bus *bus,
581 - ssb_invariants_func_t get_invariants,
582 - unsigned long baseaddr)
583 +static int __devinit ssb_bus_register(struct ssb_bus *bus,
584 + ssb_invariants_func_t get_invariants,
585 + unsigned long baseaddr)
586 {
587 int err;
588
589 @@ -851,8 +852,8 @@ err_disable_xtal:
590 }
591
592 #ifdef CONFIG_SSB_PCIHOST
593 -int ssb_bus_pcibus_register(struct ssb_bus *bus,
594 - struct pci_dev *host_pci)
595 +int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus,
596 + struct pci_dev *host_pci)
597 {
598 int err;
599
600 @@ -875,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
601 #endif /* CONFIG_SSB_PCIHOST */
602
603 #ifdef CONFIG_SSB_PCMCIAHOST
604 -int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
605 - struct pcmcia_device *pcmcia_dev,
606 - unsigned long baseaddr)
607 +int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus,
608 + struct pcmcia_device *pcmcia_dev,
609 + unsigned long baseaddr)
610 {
611 int err;
612
613 @@ -897,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register
614 #endif /* CONFIG_SSB_PCMCIAHOST */
615
616 #ifdef CONFIG_SSB_SDIOHOST
617 -int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
618 - unsigned int quirks)
619 +int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus,
620 + struct sdio_func *func,
621 + unsigned int quirks)
622 {
623 int err;
624
625 @@ -918,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_
626 EXPORT_SYMBOL(ssb_bus_sdiobus_register);
627 #endif /* CONFIG_SSB_PCMCIAHOST */
628
629 -int ssb_bus_ssbbus_register(struct ssb_bus *bus,
630 - unsigned long baseaddr,
631 - ssb_invariants_func_t get_invariants)
632 +int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus,
633 + unsigned long baseaddr,
634 + ssb_invariants_func_t get_invariants)
635 {
636 int err;
637
638 @@ -1001,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
639 switch (plltype) {
640 case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
641 if (m & SSB_CHIPCO_CLK_T6_MMASK)
642 - return SSB_CHIPCO_CLK_T6_M0;
643 - return SSB_CHIPCO_CLK_T6_M1;
644 + return SSB_CHIPCO_CLK_T6_M1;
645 + return SSB_CHIPCO_CLK_T6_M0;
646 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
647 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
648 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
649 @@ -1117,23 +1119,22 @@ static u32 ssb_tmslow_reject_bitmask(str
650 {
651 u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
652
653 - /* The REJECT bit changed position in TMSLOW between
654 - * Backplane revisions. */
655 + /* The REJECT bit seems to be different for Backplane rev 2.3 */
656 switch (rev) {
657 case SSB_IDLOW_SSBREV_22:
658 - return SSB_TMSLOW_REJECT_22;
659 + case SSB_IDLOW_SSBREV_24:
660 + case SSB_IDLOW_SSBREV_26:
661 + return SSB_TMSLOW_REJECT;
662 case SSB_IDLOW_SSBREV_23:
663 return SSB_TMSLOW_REJECT_23;
664 - case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */
665 - case SSB_IDLOW_SSBREV_25: /* same here */
666 - case SSB_IDLOW_SSBREV_26: /* same here */
667 + case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
668 case SSB_IDLOW_SSBREV_27: /* same here */
669 - return SSB_TMSLOW_REJECT_23; /* this is a guess */
670 + return SSB_TMSLOW_REJECT; /* this is a guess */
671 default:
672 printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
673 WARN_ON(1);
674 }
675 - return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
676 + return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
677 }
678
679 int ssb_device_is_enabled(struct ssb_device *dev)
680 @@ -1260,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic
681 }
682 EXPORT_SYMBOL(ssb_device_disable);
683
684 +/* Some chipsets need routing known for PCIe and 64-bit DMA */
685 +static bool ssb_dma_translation_special_bit(struct ssb_device *dev)
686 +{
687 + u16 chip_id = dev->bus->chip_id;
688 +
689 + if (dev->id.coreid == SSB_DEV_80211) {
690 + return (chip_id == 0x4322 || chip_id == 43221 ||
691 + chip_id == 43231 || chip_id == 43222);
692 + }
693 +
694 + return 0;
695 +}
696 +
697 u32 ssb_dma_translation(struct ssb_device *dev)
698 {
699 switch (dev->bus->bustype) {
700 case SSB_BUSTYPE_SSB:
701 return 0;
702 case SSB_BUSTYPE_PCI:
703 - return SSB_PCI_DMA;
704 + if (pci_is_pcie(dev->bus->host_pci) &&
705 + ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) {
706 + return SSB_PCIE_DMA_H32;
707 + } else {
708 + if (ssb_dma_translation_special_bit(dev))
709 + return SSB_PCIE_DMA_H32;
710 + else
711 + return SSB_PCI_DMA;
712 + }
713 default:
714 __ssb_dma_not_implemented(dev);
715 }
716 @@ -1309,20 +1331,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
717
718 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
719 {
720 - struct ssb_chipcommon *cc;
721 int err;
722 enum ssb_clkmode mode;
723
724 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
725 if (err)
726 goto error;
727 - cc = &bus->chipco;
728 - mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
729 - ssb_chipco_set_clockmode(cc, mode);
730
731 #ifdef CONFIG_SSB_DEBUG
732 bus->powered_up = 1;
733 #endif
734 +
735 + mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
736 + ssb_chipco_set_clockmode(&bus->chipco, mode);
737 +
738 return 0;
739 error:
740 ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
741 @@ -1330,6 +1352,37 @@ error:
742 }
743 EXPORT_SYMBOL(ssb_bus_powerup);
744
745 +static void ssb_broadcast_value(struct ssb_device *dev,
746 + u32 address, u32 data)
747 +{
748 +#ifdef CONFIG_SSB_DRIVER_PCICORE
749 + /* This is used for both, PCI and ChipCommon core, so be careful. */
750 + BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
751 + BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
752 +#endif
753 +
754 + ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
755 + ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
756 + ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
757 + ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
758 +}
759 +
760 +void ssb_commit_settings(struct ssb_bus *bus)
761 +{
762 + struct ssb_device *dev;
763 +
764 +#ifdef CONFIG_SSB_DRIVER_PCICORE
765 + dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
766 +#else
767 + dev = bus->chipco.dev;
768 +#endif
769 + if (WARN_ON(!dev))
770 + return;
771 + /* This forces an update of the cached registers. */
772 + ssb_broadcast_value(dev, 0xFD8, 0);
773 +}
774 +EXPORT_SYMBOL(ssb_commit_settings);
775 +
776 u32 ssb_admatch_base(u32 adm)
777 {
778 u32 base = 0;
779 --- a/drivers/ssb/pci.c
780 +++ b/drivers/ssb/pci.c
781 @@ -1,7 +1,7 @@
782 /*
783 * Sonics Silicon Backplane PCI-Hostbus related functions.
784 *
785 - * Copyright (C) 2005-2006 Michael Buesch <mb@bu3sch.de>
786 + * Copyright (C) 2005-2006 Michael Buesch <m@bues.ch>
787 * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
788 * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
789 * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
790 @@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb
791 static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
792 {
793 int i;
794 - u16 v;
795 + u16 v, o;
796 + u16 pwr_info_offset[] = {
797 + SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
798 + SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
799 + };
800 + BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
801 + ARRAY_SIZE(out->core_pwr_info));
802
803 /* extract the MAC address */
804 for (i = 0; i < 3; i++) {
805 @@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_
806 memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
807 sizeof(out->antenna_gain.ghz5));
808
809 + /* Extract cores power info info */
810 + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
811 + o = pwr_info_offset[i];
812 + SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
813 + SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
814 + SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
815 + SSB_SPROM8_2G_MAXP, 0);
816 +
817 + SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
818 + SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
819 + SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
820 +
821 + SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
822 + SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
823 + SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
824 + SSB_SPROM8_5G_MAXP, 0);
825 + SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
826 + SSB_SPROM8_5GH_MAXP, 0);
827 + SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
828 + SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
829 +
830 + SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
831 + SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
832 + SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
833 + SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
834 + SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
835 + SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
836 + SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
837 + SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
838 + SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
839 + }
840 +
841 + /* Extract FEM info */
842 + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
843 + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
844 + SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
845 + SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
846 + SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
847 + SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
848 + SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
849 + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
850 + SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
851 + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
852 +
853 + SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
854 + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
855 + SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
856 + SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
857 + SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
858 + SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
859 + SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
860 + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
861 + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
862 + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
863 +
864 sprom_extract_r458(out, in);
865
866 /* TODO - get remaining rev 8 stuff needed */
867 @@ -662,7 +723,6 @@ static int sprom_extract(struct ssb_bus
868 static int ssb_pci_sprom_get(struct ssb_bus *bus,
869 struct ssb_sprom *sprom)
870 {
871 - const struct ssb_sprom *fallback;
872 int err;
873 u16 *buf;
874
875 @@ -707,10 +767,17 @@ static int ssb_pci_sprom_get(struct ssb_
876 if (err) {
877 /* All CRC attempts failed.
878 * Maybe there is no SPROM on the device?
879 - * If we have a fallback, use that. */
880 - fallback = ssb_get_fallback_sprom();
881 - if (fallback) {
882 - memcpy(sprom, fallback, sizeof(*sprom));
883 + * Now we ask the arch code if there is some sprom
884 + * available for this device in some other storage */
885 + err = ssb_fill_sprom_with_fallback(bus, sprom);
886 + if (err) {
887 + ssb_printk(KERN_WARNING PFX "WARNING: Using"
888 + " fallback SPROM failed (err %d)\n",
889 + err);
890 + } else {
891 + ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
892 + " revision %d provided by"
893 + " platform.\n", sprom->revision);
894 err = 0;
895 goto out_free;
896 }
897 @@ -728,12 +795,9 @@ out_free:
898 static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
899 struct ssb_boardinfo *bi)
900 {
901 - pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID,
902 - &bi->vendor);
903 - pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID,
904 - &bi->type);
905 - pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
906 - &bi->rev);
907 + bi->vendor = bus->host_pci->subsystem_vendor;
908 + bi->type = bus->host_pci->subsystem_device;
909 + bi->rev = bus->host_pci->revision;
910 }
911
912 int ssb_pci_get_invariants(struct ssb_bus *bus,
913 --- a/drivers/ssb/pcihost_wrapper.c
914 +++ b/drivers/ssb/pcihost_wrapper.c
915 @@ -6,7 +6,7 @@
916 * Copyright (c) 2005 Stefano Brivio <st3@riseup.net>
917 * Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
918 * Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
919 - * Copyright (c) 2005-2007 Michael Buesch <mbuesch@freenet.de>
920 + * Copyright (c) 2005-2007 Michael Buesch <m@bues.ch>
921 *
922 * Licensed under the GNU/GPL. See COPYING for details.
923 */
924 @@ -53,8 +53,8 @@ static int ssb_pcihost_resume(struct pci
925 # define ssb_pcihost_resume NULL
926 #endif /* CONFIG_PM */
927
928 -static int ssb_pcihost_probe(struct pci_dev *dev,
929 - const struct pci_device_id *id)
930 +static int __devinit ssb_pcihost_probe(struct pci_dev *dev,
931 + const struct pci_device_id *id)
932 {
933 struct ssb_bus *ssb;
934 int err = -ENOMEM;
935 @@ -110,7 +110,7 @@ static void ssb_pcihost_remove(struct pc
936 pci_set_drvdata(dev, NULL);
937 }
938
939 -int ssb_pcihost_register(struct pci_driver *driver)
940 +int __devinit ssb_pcihost_register(struct pci_driver *driver)
941 {
942 driver->probe = ssb_pcihost_probe;
943 driver->remove = ssb_pcihost_remove;
944 --- a/drivers/ssb/scan.c
945 +++ b/drivers/ssb/scan.c
946 @@ -2,7 +2,7 @@
947 * Sonics Silicon Backplane
948 * Bus scanning
949 *
950 - * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de>
951 + * Copyright (C) 2005-2007 Michael Buesch <m@bues.ch>
952 * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
953 * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
954 * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
955 @@ -258,7 +258,10 @@ static int we_support_multiple_80211_cor
956 #ifdef CONFIG_SSB_PCIHOST
957 if (bus->bustype == SSB_BUSTYPE_PCI) {
958 if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
959 - bus->host_pci->device == 0x4324)
960 + ((bus->host_pci->device == 0x4313) ||
961 + (bus->host_pci->device == 0x431A) ||
962 + (bus->host_pci->device == 0x4321) ||
963 + (bus->host_pci->device == 0x4324)))
964 return 1;
965 }
966 #endif /* CONFIG_SSB_PCIHOST */
967 @@ -307,8 +310,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
968 } else {
969 if (bus->bustype == SSB_BUSTYPE_PCI) {
970 bus->chip_id = pcidev_to_chipid(bus->host_pci);
971 - pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
972 - &bus->chip_rev);
973 + bus->chip_rev = bus->host_pci->revision;
974 bus->chip_package = 0;
975 } else {
976 bus->chip_id = 0x4710;
977 --- a/drivers/ssb/sprom.c
978 +++ b/drivers/ssb/sprom.c
979 @@ -2,7 +2,7 @@
980 * Sonics Silicon Backplane
981 * Common SPROM support routines
982 *
983 - * Copyright (C) 2005-2008 Michael Buesch <mb@bu3sch.de>
984 + * Copyright (C) 2005-2008 Michael Buesch <m@bues.ch>
985 * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
986 * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
987 * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
988 @@ -17,7 +17,7 @@
989 #include <linux/slab.h>
990
991
992 -static const struct ssb_sprom *fallback_sprom;
993 +static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
994
995
996 static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
997 @@ -145,36 +145,43 @@ out:
998 }
999
1000 /**
1001 - * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
1002 + * ssb_arch_register_fallback_sprom - Registers a method providing a
1003 + * fallback SPROM if no SPROM is found.
1004 *
1005 - * @sprom: The SPROM data structure to register.
1006 + * @sprom_callback: The callback function.
1007 *
1008 - * With this function the architecture implementation may register a fallback
1009 - * SPROM data structure. The fallback is only used for PCI based SSB devices,
1010 - * where no valid SPROM can be found in the shadow registers.
1011 + * With this function the architecture implementation may register a
1012 + * callback handler which fills the SPROM data structure. The fallback is
1013 + * only used for PCI based SSB devices, where no valid SPROM can be found
1014 + * in the shadow registers.
1015 + *
1016 + * This function is useful for weird architectures that have a half-assed
1017 + * SSB device hardwired to their PCI bus.
1018 + *
1019 + * Note that it does only work with PCI attached SSB devices. PCMCIA
1020 + * devices currently don't use this fallback.
1021 + * Architectures must provide the SPROM for native SSB devices anyway, so
1022 + * the fallback also isn't used for native devices.
1023 *
1024 - * This function is useful for weird architectures that have a half-assed SSB device
1025 - * hardwired to their PCI bus.
1026 - *
1027 - * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
1028 - * don't use this fallback.
1029 - * Architectures must provide the SPROM for native SSB devices anyway,
1030 - * so the fallback also isn't used for native devices.
1031 - *
1032 - * This function is available for architecture code, only. So it is not exported.
1033 + * This function is available for architecture code, only. So it is not
1034 + * exported.
1035 */
1036 -int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
1037 +int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
1038 + struct ssb_sprom *out))
1039 {
1040 - if (fallback_sprom)
1041 + if (get_fallback_sprom)
1042 return -EEXIST;
1043 - fallback_sprom = sprom;
1044 + get_fallback_sprom = sprom_callback;
1045
1046 return 0;
1047 }
1048
1049 -const struct ssb_sprom *ssb_get_fallback_sprom(void)
1050 +int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
1051 {
1052 - return fallback_sprom;
1053 + if (!get_fallback_sprom)
1054 + return -ENOENT;
1055 +
1056 + return get_fallback_sprom(bus, out);
1057 }
1058
1059 /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
1060 --- a/drivers/ssb/ssb_private.h
1061 +++ b/drivers/ssb/ssb_private.h
1062 @@ -171,7 +171,8 @@ ssize_t ssb_attr_sprom_store(struct ssb_
1063 const char *buf, size_t count,
1064 int (*sprom_check_crc)(const u16 *sprom, size_t size),
1065 int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
1066 -extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
1067 +extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
1068 + struct ssb_sprom *out);
1069
1070
1071 /* core.c */
1072 --- a/include/linux/ssb/ssb.h
1073 +++ b/include/linux/ssb/ssb.h
1074 @@ -16,6 +16,12 @@ struct pcmcia_device;
1075 struct ssb_bus;
1076 struct ssb_driver;
1077
1078 +struct ssb_sprom_core_pwr_info {
1079 + u8 itssi_2g, itssi_5g;
1080 + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
1081 + u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
1082 +};
1083 +
1084 struct ssb_sprom {
1085 u8 revision;
1086 u8 il0mac[6]; /* MAC address for 802.11b/g */
1087 @@ -25,8 +31,10 @@ struct ssb_sprom {
1088 u8 et1phyaddr; /* MII address for enet1 */
1089 u8 et0mdcport; /* MDIO for enet0 */
1090 u8 et1mdcport; /* MDIO for enet1 */
1091 - u8 board_rev; /* Board revision number from SPROM. */
1092 + u16 board_rev; /* Board revision number from SPROM. */
1093 u8 country_code; /* Country Code */
1094 + u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */
1095 + u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
1096 u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
1097 u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
1098 u16 pa0b0;
1099 @@ -80,6 +88,8 @@ struct ssb_sprom {
1100 u16 boardflags2_hi; /* Board flags (bits 48-63) */
1101 /* TODO store board flags in a single u64 */
1102
1103 + struct ssb_sprom_core_pwr_info core_pwr_info[4];
1104 +
1105 /* Antenna gain values for up to 4 antennas
1106 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
1107 * loss in the connectors is bigger than the gain. */
1108 @@ -92,6 +102,15 @@ struct ssb_sprom {
1109 } ghz5; /* 5GHz band */
1110 } antenna_gain;
1111
1112 + struct {
1113 + struct {
1114 + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
1115 + } ghz2;
1116 + struct {
1117 + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
1118 + } ghz5;
1119 + } fem;
1120 +
1121 /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
1122 };
1123
1124 @@ -99,7 +118,7 @@ struct ssb_sprom {
1125 struct ssb_boardinfo {
1126 u16 vendor;
1127 u16 type;
1128 - u16 rev;
1129 + u8 rev;
1130 };
1131
1132
1133 @@ -229,10 +248,9 @@ struct ssb_driver {
1134 #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
1135
1136 extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
1137 -static inline int ssb_driver_register(struct ssb_driver *drv)
1138 -{
1139 - return __ssb_driver_register(drv, THIS_MODULE);
1140 -}
1141 +#define ssb_driver_register(drv) \
1142 + __ssb_driver_register(drv, THIS_MODULE)
1143 +
1144 extern void ssb_driver_unregister(struct ssb_driver *drv);
1145
1146
1147 @@ -308,7 +326,7 @@ struct ssb_bus {
1148
1149 /* ID information about the Chip. */
1150 u16 chip_id;
1151 - u16 chip_rev;
1152 + u8 chip_rev;
1153 u16 sprom_offset;
1154 u16 sprom_size; /* number of words in sprom */
1155 u8 chip_package;
1156 @@ -404,7 +422,9 @@ extern bool ssb_is_sprom_available(struc
1157
1158 /* Set a fallback SPROM.
1159 * See kdoc at the function definition for complete documentation. */
1160 -extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
1161 +extern int ssb_arch_register_fallback_sprom(
1162 + int (*sprom_callback)(struct ssb_bus *bus,
1163 + struct ssb_sprom *out));
1164
1165 /* Suspend a SSB bus.
1166 * Call this from the parent bus suspend routine. */
1167 @@ -518,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct
1168 * Otherwise static always-on powercontrol will be used. */
1169 extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
1170
1171 +extern void ssb_commit_settings(struct ssb_bus *bus);
1172
1173 /* Various helper functions */
1174 extern u32 ssb_admatch_base(u32 adm);
1175 --- a/include/linux/ssb/ssb_driver_chipcommon.h
1176 +++ b/include/linux/ssb/ssb_driver_chipcommon.h
1177 @@ -8,7 +8,7 @@
1178 * gpio interface, extbus, and support for serial and parallel flashes.
1179 *
1180 * Copyright 2005, Broadcom Corporation
1181 - * Copyright 2006, Michael Buesch <mb@bu3sch.de>
1182 + * Copyright 2006, Michael Buesch <m@bues.ch>
1183 *
1184 * Licensed under the GPL version 2. See COPYING for details.
1185 */
1186 @@ -123,6 +123,8 @@
1187 #define SSB_CHIPCO_FLASHDATA 0x0048
1188 #define SSB_CHIPCO_BCAST_ADDR 0x0050
1189 #define SSB_CHIPCO_BCAST_DATA 0x0054
1190 +#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
1191 +#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
1192 #define SSB_CHIPCO_GPIOIN 0x0060
1193 #define SSB_CHIPCO_GPIOOUT 0x0064
1194 #define SSB_CHIPCO_GPIOOUTEN 0x0068
1195 @@ -131,6 +133,9 @@
1196 #define SSB_CHIPCO_GPIOIRQ 0x0074
1197 #define SSB_CHIPCO_WATCHDOG 0x0080
1198 #define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
1199 +#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF
1200 +#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0
1201 +#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000
1202 #define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16
1203 #define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
1204 #define SSB_CHIPCO_CLOCK_N 0x0090
1205 @@ -189,8 +194,10 @@
1206 #define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
1207 #define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
1208 #define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
1209 -#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
1210 -#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
1211 +#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
1212 +#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */
1213 +#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
1214 +#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
1215 #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
1216 #define SSB_CHIPCO_UART0_DATA 0x0300
1217 #define SSB_CHIPCO_UART0_IMR 0x0304
1218 --- a/include/linux/ssb/ssb_regs.h
1219 +++ b/include/linux/ssb/ssb_regs.h
1220 @@ -97,7 +97,7 @@
1221 #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
1222 #define SSB_TMSLOW 0x0F98 /* SB Target State Low */
1223 #define SSB_TMSLOW_RESET 0x00000001 /* Reset */
1224 -#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
1225 +#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */
1226 #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
1227 #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
1228 #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
1229 @@ -432,6 +432,56 @@
1230 #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
1231 #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
1232 #define SSB_SPROM8_RXPO5G_SHIFT 8
1233 +#define SSB_SPROM8_FEM2G 0x00AE
1234 +#define SSB_SPROM8_FEM5G 0x00B0
1235 +#define SSB_SROM8_FEM_TSSIPOS 0x0001
1236 +#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0
1237 +#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006
1238 +#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1
1239 +#define SSB_SROM8_FEM_PDET_RANGE 0x00F8
1240 +#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3
1241 +#define SSB_SROM8_FEM_TR_ISO 0x0700
1242 +#define SSB_SROM8_FEM_TR_ISO_SHIFT 8
1243 +#define SSB_SROM8_FEM_ANTSWLUT 0xF800
1244 +#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
1245 +#define SSB_SPROM8_THERMAL 0x00B2
1246 +#define SSB_SPROM8_MPWR_RAWTS 0x00B4
1247 +#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
1248 +#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
1249 +#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
1250 +
1251 +/* There are 4 blocks with power info sharing the same layout */
1252 +#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
1253 +#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
1254 +#define SSB_SROM8_PWR_INFO_CORE2 0x0100
1255 +#define SSB_SROM8_PWR_INFO_CORE3 0x0120
1256 +
1257 +#define SSB_SROM8_2G_MAXP_ITSSI 0x00
1258 +#define SSB_SPROM8_2G_MAXP 0x00FF
1259 +#define SSB_SPROM8_2G_ITSSI 0xFF00
1260 +#define SSB_SPROM8_2G_ITSSI_SHIFT 8
1261 +#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
1262 +#define SSB_SROM8_2G_PA_1 0x04
1263 +#define SSB_SROM8_2G_PA_2 0x06
1264 +#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
1265 +#define SSB_SPROM8_5G_MAXP 0x00FF
1266 +#define SSB_SPROM8_5G_ITSSI 0xFF00
1267 +#define SSB_SPROM8_5G_ITSSI_SHIFT 8
1268 +#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
1269 +#define SSB_SPROM8_5GH_MAXP 0x00FF
1270 +#define SSB_SPROM8_5GL_MAXP 0xFF00
1271 +#define SSB_SPROM8_5GL_MAXP_SHIFT 8
1272 +#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
1273 +#define SSB_SROM8_5G_PA_1 0x0E
1274 +#define SSB_SROM8_5G_PA_2 0x10
1275 +#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
1276 +#define SSB_SROM8_5GL_PA_1 0x14
1277 +#define SSB_SROM8_5GL_PA_2 0x16
1278 +#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
1279 +#define SSB_SROM8_5GH_PA_1 0x1A
1280 +#define SSB_SROM8_5GH_PA_2 0x1C
1281 +
1282 +/* TODO: Make it deprecated */
1283 #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
1284 #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
1285 #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
1286 @@ -456,12 +506,53 @@
1287 #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
1288 #define SSB_SPROM8_PA1HIB1 0x00DA
1289 #define SSB_SPROM8_PA1HIB2 0x00DC
1290 +
1291 #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
1292 #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
1293 #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
1294 #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
1295 #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
1296
1297 +/* Values for boardflags_lo read from SPROM */
1298 +#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
1299 +#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
1300 +#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */
1301 +#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */
1302 +#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */
1303 +#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */
1304 +#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */
1305 +#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */
1306 +#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */
1307 +#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */
1308 +#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */
1309 +#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */
1310 +#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */
1311 +#define SSB_BFL_HGPA 0x2000 /* had high gain PA */
1312 +#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */
1313 +#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */
1314 +
1315 +/* Values for boardflags_hi read from SPROM */
1316 +#define SSB_BFH_NOPA 0x0001 /* has no PA */
1317 +#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */
1318 +#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */
1319 +#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */
1320 +#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */
1321 +#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */
1322 +#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */
1323 +
1324 +/* Values for boardflags2_lo read from SPROM */
1325 +#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */
1326 +#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */
1327 +#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */
1328 +#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */
1329 +#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */
1330 +#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */
1331 +#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */
1332 +#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */
1333 +#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */
1334 +#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */
1335 +#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */
1336 +
1337 /* Values for SSB_SPROM1_BINF_CCODE */
1338 enum {
1339 SSB_SPROM1CCODE_WORLD = 0,
1340 --- a/drivers/ssb/b43_pci_bridge.c
1341 +++ b/drivers/ssb/b43_pci_bridge.c
1342 @@ -5,12 +5,13 @@
1343 * because of its small size we include it in the SSB core
1344 * instead of creating a standalone module.
1345 *
1346 - * Copyright 2007 Michael Buesch <mb@bu3sch.de>
1347 + * Copyright 2007 Michael Buesch <m@bues.ch>
1348 *
1349 * Licensed under the GNU/GPL. See COPYING for details.
1350 */
1351
1352 #include <linux/pci.h>
1353 +#include <linux/module.h>
1354 #include <linux/ssb/ssb.h>
1355
1356 #include "ssb_private.h"
1357 --- a/drivers/ssb/driver_extif.c
1358 +++ b/drivers/ssb/driver_extif.c
1359 @@ -3,7 +3,7 @@
1360 * Broadcom EXTIF core driver
1361 *
1362 * Copyright 2005, Broadcom Corporation
1363 - * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
1364 + * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
1365 * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
1366 * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
1367 *
1368 --- a/drivers/ssb/driver_mipscore.c
1369 +++ b/drivers/ssb/driver_mipscore.c
1370 @@ -3,7 +3,7 @@
1371 * Broadcom MIPS core driver
1372 *
1373 * Copyright 2005, Broadcom Corporation
1374 - * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
1375 + * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
1376 *
1377 * Licensed under the GNU/GPL. See COPYING for details.
1378 */
1379 --- a/drivers/ssb/embedded.c
1380 +++ b/drivers/ssb/embedded.c
1381 @@ -3,7 +3,7 @@
1382 * Embedded systems support code
1383 *
1384 * Copyright 2005-2008, Broadcom Corporation
1385 - * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de>
1386 + * Copyright 2006-2008, Michael Buesch <m@bues.ch>
1387 *
1388 * Licensed under the GNU/GPL. See COPYING for details.
1389 */
1390 --- a/drivers/ssb/pcmcia.c
1391 +++ b/drivers/ssb/pcmcia.c
1392 @@ -3,7 +3,7 @@
1393 * PCMCIA-Hostbus related functions
1394 *
1395 * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
1396 - * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
1397 + * Copyright 2007-2008 Michael Buesch <m@bues.ch>
1398 *
1399 * Licensed under the GNU/GPL. See COPYING for details.
1400 */
1401 --- a/drivers/ssb/sdio.c
1402 +++ b/drivers/ssb/sdio.c
1403 @@ -6,7 +6,7 @@
1404 *
1405 * Based on drivers/ssb/pcmcia.c
1406 * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
1407 - * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
1408 + * Copyright 2007-2008 Michael Buesch <m@bues.ch>
1409 *
1410 * Licensed under the GNU/GPL. See COPYING for details.
1411 *
Personal OpenWRT clone
This page took 0.158012 seconds and 5 git commands to generate.