target/linux/ixp4xx/patches-3.0/520-tw2662_support.patch

   1 --- a/arch/arm/mach-ixp4xx/Kconfig
   2 +++ b/arch/arm/mach-ixp4xx/Kconfig
   3 @@ -180,6 +180,15 @@ config ARCH_PRPMC1100
   4           PrPCM1100 Processor Mezanine Module. For more information on
   5           this platform, see <file:Documentation/arm/IXP4xx>.
   6
   7 +config MACH_TW2662
   8 +        bool "Titan Wireless TW-266-2"
   9 +        select PCI
  10 +        help
  11 +          Say 'Y' here if you want your kernel to support the Titan
  12 +          Wireless TW266-2. For more information on this platform,
  13 +          see http://openwrt.org
  14 +
  15 +
  16  config MACH_TW5334
  17         bool "Titan Wireless TW-533-4"
  18         select PCI
  19 --- a/arch/arm/mach-ixp4xx/Makefile
  20 +++ b/arch/arm/mach-ixp4xx/Makefile
  21 @@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER)     += sid
  22  obj-pci-$(CONFIG_MACH_COMPEX)          += ixdp425-pci.o
  23  obj-pci-$(CONFIG_MACH_WRT300NV2)               += wrt300nv2-pci.o
  24  obj-pci-$(CONFIG_MACH_AP1000)          += ixdp425-pci.o
  25 +obj-pci-$(CONFIG_MACH_TW2662)          += tw2662-pci.o
  26  obj-pci-$(CONFIG_MACH_TW5334)          += tw5334-pci.o
  27  obj-pci-$(CONFIG_MACH_MI424WR)         += mi424wr-pci.o
  28  obj-pci-$(CONFIG_MACH_USR8200)         += usr8200-pci.o
  29 @@ -50,6 +51,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
  30  obj-$(CONFIG_MACH_COMPEX)      += compex-setup.o
  31  obj-$(CONFIG_MACH_WRT300NV2)   += wrt300nv2-setup.o
  32  obj-$(CONFIG_MACH_AP1000)      += ap1000-setup.o
  33 +obj-$(CONFIG_MACH_TW2662)      += tw2662-setup.o
  34  obj-$(CONFIG_MACH_TW5334)      += tw5334-setup.o
  35  obj-$(CONFIG_MACH_MI424WR)     += mi424wr-setup.o
  36  obj-$(CONFIG_MACH_USR8200)     += usr8200-setup.o
  37 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
  38 +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
  39 @@ -43,7 +43,7 @@ static __inline__ void __arch_decomp_set
  40         if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
  41                          machine_is_gateway7001() || machine_is_wg302v2() ||
  42                          machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
  43 -                        machine_is_tw5334() || machine_is_usr8200())
  44 +                        machine_is_tw5334() || machine_is_usr8200() || machine_is_tw2662())
  45                 uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
  46         else
  47                 uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
  48 --- /dev/null
  49 +++ b/arch/arm/mach-ixp4xx/tw2662-pci.c
  50 @@ -0,0 +1,68 @@
  51 +/*
  52 + * arch/arm/mach-ixp4xx/tw2662-pci.c
  53 + *
  54 + * PCI setup routines for Tiran Wireless TW-266-2 platform
  55 + *
  56 + * Copyright (C) 2002 Jungo Software Technologies.
  57 + * Copyright (C) 2003 MontaVista Softwrae, Inc.
  58 + * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
  59 + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
  60 + *
  61 + * Maintainer: Deepak Saxena <dsaxena@mvista.com>
  62 + * Maintainer: Alexandros C. Couloumbis <alex@ozo.com>
  63 + *
  64 + * This program is free software; you can redistribute it and/or modify
  65 + * it under the terms of the GNU General Public License version 2 as
  66 + * published by the Free Software Foundation.
  67 + *
  68 + */
  69 +
  70 +#include <linux/kernel.h>
  71 +#include <linux/pci.h>
  72 +#include <linux/init.h>
  73 +#include <linux/irq.h>
  74 +#include <asm/mach-types.h>
  75 +#include <mach/hardware.h>
  76 +#include <asm/irq.h>
  77 +#include <asm/mach/pci.h>
  78 +
  79 +#define SLOT0_DEVID    1
  80 +#define SLOT1_DEVID    3
  81 +
  82 +/* PCI controller GPIO to IRQ pin mappings */
  83 +#define SLOT0_INTA     11
  84 +#define SLOT1_INTA     9
  85 +
  86 +void __init tw2662_pci_preinit(void)
  87 +{
  88 +       irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
  89 +       irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
  90 +       ixp4xx_pci_preinit();
  91 +}
  92 +
  93 +static int __init tw2662_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
  94 +{
  95 +       if (slot == SLOT0_DEVID)
  96 +               return IXP4XX_GPIO_IRQ(SLOT0_INTA);
  97 +       else if (slot == SLOT1_DEVID)
  98 +               return IXP4XX_GPIO_IRQ(SLOT1_INTA);
  99 +       else return -1;
 100 +}
 101 +
 102 +struct hw_pci tw2662_pci __initdata = {
 103 +       .nr_controllers = 1,
 104 +       .preinit =        tw2662_pci_preinit,
 105 +       .swizzle =        pci_std_swizzle,
 106 +       .setup =          ixp4xx_setup,
 107 +       .scan =           ixp4xx_scan_bus,
 108 +       .map_irq =        tw2662_map_irq,
 109 +};
 110 +
 111 +int __init tw2662_pci_init(void)
 112 +{
 113 +        if (machine_is_tw2662())
 114 +               pci_common_init(&tw2662_pci);
 115 +        return 0;
 116 +}
 117 +
 118 +subsys_initcall(tw2662_pci_init);
 119 --- /dev/null
 120 +++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
 121 @@ -0,0 +1,210 @@
 122 +/*
 123 + * arch/arm/mach-ixp4xx/tw2662-setup.c
 124 + *
 125 + * Titan Wireless TW-266-2
 126 + *
 127 + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
 128 + * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
 129 + *
 130 + * based on ap1000-setup.c:
 131 + *     Author: Imre Kaloz <Kaloz@openwrt.org>
 132 + */
 133 +
 134 +#include <linux/if_ether.h>
 135 +#include <linux/kernel.h>
 136 +#include <linux/init.h>
 137 +#include <linux/device.h>
 138 +#include <linux/serial.h>
 139 +#include <linux/tty.h>
 140 +#include <linux/serial_8250.h>
 141 +#include <linux/slab.h>
 142 +#include <linux/netdevice.h>
 143 +#include <linux/etherdevice.h>
 144 +#include <linux/platform_device.h>
 145 +
 146 +#include <asm/io.h>
 147 +#include <asm/types.h>
 148 +#include <asm/setup.h>
 149 +#include <asm/memory.h>
 150 +#include <mach/hardware.h>
 151 +#include <asm/mach-types.h>
 152 +#include <asm/irq.h>
 153 +#include <asm/mach/arch.h>
 154 +#include <asm/mach/flash.h>
 155 +
 156 +/* gpio mask used by platform device */
 157 +#define TW2662_GPIO_MASK        (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7)
 158 +
 159 +static struct flash_platform_data tw2662_flash_data = {
 160 +       .map_name       = "cfi_probe",
 161 +       .width          = 2,
 162 +};
 163 +
 164 +static struct resource tw2662_flash_resource = {
 165 +       .flags          = IORESOURCE_MEM,
 166 +};
 167 +
 168 +static struct platform_device tw2662_flash = {
 169 +       .name           = "IXP4XX-Flash",
 170 +       .id             = 0,
 171 +       .dev            = {
 172 +               .platform_data = &tw2662_flash_data,
 173 +       },
 174 +       .num_resources  = 1,
 175 +       .resource       = &tw2662_flash_resource,
 176 +};
 177 +
 178 +static struct resource tw2662_gpio_resources[] = {
 179 +        {
 180 +                .name   = "gpio",
 181 +                /* FIXME: gpio mask should be model specific */
 182 +                .start  = TW2662_GPIO_MASK,
 183 +                .end    = TW2662_GPIO_MASK,
 184 +                .flags  = 0,
 185 +        },
 186 +};
 187 +
 188 +static struct platform_device tw2662_gpio = {
 189 +       .name                   = "GPIODEV",
 190 +       .id                     = -1,
 191 +       .num_resources          = ARRAY_SIZE(tw2662_gpio_resources),
 192 +       .resource               = tw2662_gpio_resources,
 193 +};
 194 +
 195 +static struct resource tw2662_uart_resources[] = {
 196 +       {
 197 +               .start          = IXP4XX_UART1_BASE_PHYS,
 198 +               .end            = IXP4XX_UART1_BASE_PHYS + 0x0fff,
 199 +               .flags          = IORESOURCE_MEM
 200 +       },
 201 +       {
 202 +               .start          = IXP4XX_UART2_BASE_PHYS,
 203 +               .end            = IXP4XX_UART2_BASE_PHYS + 0x0fff,
 204 +               .flags          = IORESOURCE_MEM
 205 +       }
 206 +};
 207 +
 208 +static struct plat_serial8250_port tw2662_uart_data[] = {
 209 +       {
 210 +               .mapbase        = IXP4XX_UART1_BASE_PHYS,
 211 +               .membase        = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 212 +               .irq            = IRQ_IXP4XX_UART1,
 213 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 214 +               .iotype         = UPIO_MEM,
 215 +               .regshift       = 2,
 216 +               .uartclk        = IXP4XX_UART_XTAL,
 217 +       },
 218 +       {
 219 +               .mapbase        = IXP4XX_UART2_BASE_PHYS,
 220 +               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 221 +               .irq            = IRQ_IXP4XX_UART2,
 222 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 223 +               .iotype         = UPIO_MEM,
 224 +               .regshift       = 2,
 225 +               .uartclk        = IXP4XX_UART_XTAL,
 226 +       },
 227 +       { },
 228 +};
 229 +
 230 +static struct platform_device tw2662_uart = {
 231 +       .name                   = "serial8250",
 232 +       .id                     = PLAT8250_DEV_PLATFORM,
 233 +       .dev.platform_data      = tw2662_uart_data,
 234 +       .num_resources          = 2,
 235 +       .resource               = tw2662_uart_resources
 236 +};
 237 +
 238 +/* Built-in 10/100 Ethernet MAC interfaces */
 239 +static struct eth_plat_info tw2662_plat_eth[] = {
 240 +        {
 241 +                .phy            = 3,
 242 +                .rxq            = 3,
 243 +                .txreadyq       = 20,
 244 +        }, {
 245 +                .phy            = 1,
 246 +                .rxq            = 4,
 247 +                .txreadyq       = 21,
 248 +        }
 249 +};
 250 +
 251 +static struct platform_device tw2662_eth[] = {
 252 +       {
 253 +               .name                   = "ixp4xx_eth",
 254 +               .id                     = IXP4XX_ETH_NPEB,
 255 +               .dev.platform_data      = tw2662_plat_eth,
 256 +       }, {
 257 +               .name                   = "ixp4xx_eth",
 258 +               .id                     = IXP4XX_ETH_NPEC,
 259 +               .dev.platform_data      = tw2662_plat_eth + 1,
 260 +       }
 261 +};
 262 +
 263 +
 264 +static struct platform_device *tw2662_devices[] __initdata = {
 265 +       &tw2662_flash,
 266 +       &tw2662_uart,
 267 +       &tw2662_gpio,
 268 +       &tw2662_eth[0],
 269 +       &tw2662_eth[1],
 270 +};
 271 +
 272 +static char tw2662_mem_fixup[] __initdata = "mem=64M ";
 273 +
 274 +static void __init tw2662_fixup(struct machine_desc *desc,
 275 +               struct tag *tags, char **cmdline, struct meminfo *mi)
 276 +
 277 +{
 278 +       struct tag *t = tags;
 279 +       char *p = *cmdline;
 280 +
 281 +       /* Find the end of the tags table, taking note of any cmdline tag. */
 282 +       for (; t->hdr.size; t = tag_next(t)) {
 283 +               if (t->hdr.tag == ATAG_CMDLINE) {
 284 +                       p = t->u.cmdline.cmdline;
 285 +               }
 286 +       }
 287 +
 288 +       /* Overwrite the end of the table with a new cmdline tag. */
 289 +       t->hdr.tag = ATAG_CMDLINE;
 290 +       t->hdr.size = (sizeof (struct tag_header) +
 291 +               strlen(tw2662_mem_fixup) + strlen(p) + 1 + 4) >> 2;
 292 +       strlcpy(t->u.cmdline.cmdline, tw2662_mem_fixup, COMMAND_LINE_SIZE);
 293 +       strlcpy(t->u.cmdline.cmdline + strlen(tw2662_mem_fixup), p,
 294 +               COMMAND_LINE_SIZE - strlen(tw2662_mem_fixup));
 295 +
 296 +       /* Terminate the table. */
 297 +       t = tag_next(t);
 298 +       t->hdr.tag = ATAG_NONE;
 299 +       t->hdr.size = 0;
 300 +}
 301 +
 302 +static void __init tw2662_init(void)
 303 +{
 304 +       ixp4xx_sys_init();
 305 +
 306 +       tw2662_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 307 +       tw2662_flash_resource.end =
 308 +               IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 309 +
 310 +       platform_add_devices(tw2662_devices, ARRAY_SIZE(tw2662_devices));
 311 +
 312 +       if (!(is_valid_ether_addr(tw2662_plat_eth[0].hwaddr)))
 313 +               random_ether_addr(tw2662_plat_eth[0].hwaddr);
 314 +       if (!(is_valid_ether_addr(tw2662_plat_eth[1].hwaddr))) {
 315 +               memcpy(tw2662_plat_eth[1].hwaddr, tw2662_plat_eth[0].hwaddr, ETH_ALEN);
 316 +               tw2662_plat_eth[1].hwaddr[5] = (tw2662_plat_eth[0].hwaddr[5] + 1);
 317 +       }
 318 +
 319 +}
 320 +
 321 +#ifdef CONFIG_MACH_TW2662
 322 +MACHINE_START(TW2662, "Titan Wireless TW-266-2")
 323 +       /* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
 324 +       .fixup          = tw2662_fixup,
 325 +       .map_io         = ixp4xx_map_io,
 326 +       .init_irq       = ixp4xx_init_irq,
 327 +       .timer          = &ixp4xx_timer,
 328 +       .boot_params    = 0x0100,
 329 +       .init_machine   = tw2662_init,
 330 +MACHINE_END
 331 +#endif