[x86] add olpc 2.6.31 configuration, forward port the block2mtd patch, refresh patches
[openwrt.git] / target / linux / s3c24xx / files-2.6.31 / drivers / ar6000 / include / gpio.h
1 /*
2 * Copyright (c) 2005 Atheros Communications Inc.
3 * All rights reserved.
4 *
5 * $ATH_LICENSE_HOSTSDK0_C$
6 *
7 */
8
9 #if defined(AR6001)
10 #define GPIO_PIN_COUNT 18
11 #else
12 #define GPIO_PIN_COUNT 18
13 #endif
14
15 /*
16 * Possible values for WMIX_GPIO_SET_REGISTER_CMDID.
17 * NB: These match hardware order, so that addresses can
18 * easily be computed.
19 */
20 #define GPIO_ID_OUT 0x00000000
21 #define GPIO_ID_OUT_W1TS 0x00000001
22 #define GPIO_ID_OUT_W1TC 0x00000002
23 #define GPIO_ID_ENABLE 0x00000003
24 #define GPIO_ID_ENABLE_W1TS 0x00000004
25 #define GPIO_ID_ENABLE_W1TC 0x00000005
26 #define GPIO_ID_IN 0x00000006
27 #define GPIO_ID_STATUS 0x00000007
28 #define GPIO_ID_STATUS_W1TS 0x00000008
29 #define GPIO_ID_STATUS_W1TC 0x00000009
30 #define GPIO_ID_PIN0 0x0000000a
31 #define GPIO_ID_PIN(n) (GPIO_ID_PIN0+(n))
32
33 #define GPIO_LAST_REGISTER_ID GPIO_ID_PIN(17)
34 #define GPIO_ID_NONE 0xffffffff
This page took 0.047191 seconds and 5 git commands to generate.