target/linux/pxa/patches-2.6.21/015-smc-ether-addr.patch

   1 --- a/drivers/net/smc91x.c
   2 +++ b/drivers/net/smc91x.c
   3 @@ -1815,6 +1815,39 @@ static int __init smc_findirq(void __iom
   4         return probe_irq_off(cookie);
   5  }
   6
   7 +static inline unsigned int is_gumstix_oui(u8 *addr)
   8 +{
   9 +       return (addr[0] == 0x00 && addr[1] == 0x15 && addr[2] == 0xC9);
  10 +}
  11 +
  12 +/**
  13 + * gen_serial_ether_addr - Generate software assigned Ethernet address
  14 + * based on the system_serial number
  15 + * @addr: Pointer to a six-byte array containing the Ethernet address
  16 + *
  17 + * Generate an Ethernet address (MAC) that is not multicast
  18 + * and has the local assigned bit set, keyed on the system_serial
  19 + */
  20 +static inline void gen_serial_ether_addr(u8 *addr)
  21 +{
  22 +       static u8 ether_serial_digit = 0;
  23 +       addr [0] = system_serial_high >> 8;
  24 +       addr [1] = system_serial_high;
  25 +       addr [2] = system_serial_low >> 24;
  26 +       addr [3] = system_serial_low >> 16;
  27 +       addr [4] = system_serial_low >> 8;
  28 +       addr [5] = (system_serial_low & 0xc0) | /* top bits are from system serial */
  29 +               (1 << 4) |                      /* 2 bits identify interface type 1=ether, 2=usb, 3&4 undef */
  30 +               ((ether_serial_digit++) & 0x0f);        /* 15 possible interfaces of each type */
  31 +
  32 +       if(!is_gumstix_oui(addr))
  33 +       {
  34 +               addr [0] &= 0xfe;               /* clear multicast bit */
  35 +               addr [0] |= 0x02;               /* set local assignment bit (IEEE802) */
  36 +       }
  37 +}
  38 +
  39 +
  40  /*
  41   * Function: smc_probe(unsigned long ioaddr)
  42   *
  43 @@ -2032,15 +2065,13 @@ static int __init smc_probe(struct net_d
  44                         THROTTLE_TX_PKTS ? " [throttle_tx]" : "");
  45
  46                 if (!is_valid_ether_addr(dev->dev_addr)) {
  47 -                       printk("%s: Invalid ethernet MAC address.  Please "
  48 -                              "set using ifconfig\n", dev->name);
  49 -               } else {
  50 +                       gen_serial_ether_addr(dev->dev_addr);
  51 +               }
  52                         /* Print the Ethernet address */
  53                         printk("%s: Ethernet addr: ", dev->name);
  54                         for (i = 0; i < 5; i++)
  55                                 printk("%2.2x:", dev->dev_addr[i]);
  56                         printk("%2.2x\n", dev->dev_addr[5]);
  57 -               }
  58
  59                 if (lp->phy_type == 0) {
  60                         PRINTK("%s: No PHY found\n", dev->name);