target/linux/etrax/patches/201-flashsize.patch

   1 --- a/arch/cris/arch-v10/lib/hw_settings.S
   2 +++ b/arch/cris/arch-v10/lib/hw_settings.S
   3 @@ -60,3 +60,5 @@
   4         .dword R_PORT_PB_SET
   5         .dword PB_SET_VALUE
   6         .dword 0 ; No more register values
   7 +       .ascii "ACME_PART_MAGIC"
   8 +       .dword 0xdeadc0de
   9 --- a/arch/cris/arch-v10/drivers/axisflashmap.c
  10 +++ b/arch/cris/arch-v10/drivers/axisflashmap.c
  11 @@ -113,7 +113,7 @@
  12
  13  /* If no partition-table was found, we use this default-set. */
  14  #define MAX_PARTITIONS         7
  15 -#define NUM_DEFAULT_PARTITIONS 3
  16 +#define NUM_DEFAULT_PARTITIONS 2
  17
  18  /*
  19   * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
  20 @@ -122,19 +122,14 @@
  21   */
  22  static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
  23         {
  24 -               .name = "boot firmware",
  25 -               .size = CONFIG_ETRAX_PTABLE_SECTOR,
  26 -               .offset = 0
  27 -       },
  28 -       {
  29                 .name = "kernel",
  30 -               .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
  31 -               .offset = CONFIG_ETRAX_PTABLE_SECTOR
  32 +               .size = 0x00,
  33 +               .offset = 0
  34         },
  35         {
  36 -               .name = "filesystem",
  37 -               .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
  38 -               .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
  39 +               .name = "rootfs",
  40 +               .size = 0x200000 ,
  41 +               .offset = 0x200000
  42         }
  43  };
  44
  45 @@ -281,6 +276,11 @@
  46         struct partitiontable_entry *ptable;
  47         int use_default_ptable = 1; /* Until proven otherwise. */
  48         const char pmsg[] = "  /dev/flash%d at 0x%08x, size 0x%08x\n";
  49 +       unsigned int kernel_part_size = 0;
  50 +       unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR);
  51 +       unsigned int flash_scan_count = 0;
  52 +       const char *part_magic = "ACME_PART_MAGIC";
  53 +       unsigned int magic_len = strlen(part_magic);
  54
  55         if (!(mymtd = flash_probe())) {
  56                 /* There's no reason to use this module if no flash chip can
  57 @@ -292,6 +292,31 @@
  58                        mymtd->name, mymtd->size);
  59                 axisflash_mtd = mymtd;
  60         }
  61 +       /* scan flash to findout where out partition starts */
  62 +
  63 +       printk(KERN_INFO "Scanning flash for end of kernel magic\n");
  64 +       for(flash_scan_count = 0; flash_scan_count < 100000; flash_scan_count++){
  65 +               if(strncmp(&flash_mem[flash_scan_count], part_magic, magic_len - 1) == 0)
  66 +               {
  67 +                       kernel_part_size = flash_mem[flash_scan_count + magic_len ];
  68 +                       kernel_part_size <<= 8;
  69 +                       kernel_part_size += flash_mem[flash_scan_count + magic_len + 2];
  70 +                       kernel_part_size <<= 8;
  71 +                       kernel_part_size += flash_mem[flash_scan_count + magic_len + 1];
  72 +                       kernel_part_size <<= 8;
  73 +                       kernel_part_size += flash_mem[flash_scan_count + magic_len + 3];
  74 +                       printk(KERN_INFO "Kernel ends at 0x%.08X\n", kernel_part_size);
  75 +                       flash_scan_count = 1100000;
  76 +               }
  77 +       }
  78 +
  79 +
  80 +       if(kernel_part_size){
  81 +               kernel_part_size = (kernel_part_size & 0xffff0000);
  82 +               axis_default_partitions[0].size = kernel_part_size;
  83 +               axis_default_partitions[1].size =  mymtd->size - axis_default_partitions[0].size;
  84 +               axis_default_partitions[1].offset = axis_default_partitions[0].size;
  85 +       }
  86
  87         if (mymtd) {
  88                 mymtd->owner = THIS_MODULE;