fix typo

[openwrt.git] / package / libertas / src / host.h

/**
  * This file contains definitions of WLAN commands.
  */

#ifndef _LBS_HOST_H_
#define _LBS_HOST_H_

/** PUBLIC DEFINITIONS */
#define DEFAULT_AD_HOC_CHANNEL                  6
#define DEFAULT_AD_HOC_CHANNEL_A                36

/** IEEE 802.11 oids */
#define OID_802_11_SSID                         0x00008002
#define OID_802_11_INFRASTRUCTURE_MODE          0x00008008
#define OID_802_11_FRAGMENTATION_THRESHOLD      0x00008009
#define OID_802_11_RTS_THRESHOLD                0x0000800A
#define OID_802_11_TX_ANTENNA_SELECTED          0x0000800D
#define OID_802_11_SUPPORTED_RATES              0x0000800E
#define OID_802_11_STATISTICS                   0x00008012
#define OID_802_11_TX_RETRYCOUNT                0x0000801D
#define OID_802_11D_ENABLE                      0x00008020

#define CMD_OPTION_WAITFORRSP                   0x0002

/** Host command IDs */

/* Return command are almost always the same as the host command, but with
 * bit 15 set high.  There are a few exceptions, though...
 */
#define CMD_RET(cmd)                    (0x8000 | cmd)

/* Return command convention exceptions: */
#define CMD_RET_802_11_ASSOCIATE                0x8012

/* Command codes */
#define CMD_CODE_DNLD                           0x0002
#define CMD_GET_HW_SPEC                         0x0003
#define CMD_EEPROM_UPDATE                       0x0004
#define CMD_802_11_RESET                        0x0005
#define CMD_802_11_SCAN                         0x0006
#define CMD_802_11_GET_LOG                      0x000b
#define CMD_MAC_MULTICAST_ADR                   0x0010
#define CMD_802_11_AUTHENTICATE                 0x0011
#define CMD_802_11_EEPROM_ACCESS                0x0059
#define CMD_802_11_ASSOCIATE                    0x0050
#define CMD_802_11_SET_WEP                      0x0013
#define CMD_802_11_GET_STAT                     0x0014
#define CMD_802_3_GET_STAT                      0x0015
#define CMD_802_11_SNMP_MIB                     0x0016
#define CMD_MAC_REG_MAP                         0x0017
#define CMD_BBP_REG_MAP                         0x0018
#define CMD_MAC_REG_ACCESS                      0x0019
#define CMD_BBP_REG_ACCESS                      0x001a
#define CMD_RF_REG_ACCESS                       0x001b
#define CMD_802_11_RADIO_CONTROL                0x001c
#define CMD_802_11_RF_CHANNEL                   0x001d
#define CMD_802_11_RF_TX_POWER                  0x001e
#define CMD_802_11_RSSI                         0x001f
#define CMD_802_11_RF_ANTENNA                   0x0020
#define CMD_802_11_PS_MODE                      0x0021
#define CMD_802_11_DATA_RATE                    0x0022
#define CMD_RF_REG_MAP                          0x0023
#define CMD_802_11_DEAUTHENTICATE               0x0024
#define CMD_802_11_REASSOCIATE                  0x0025
#define CMD_802_11_DISASSOCIATE                 0x0026
#define CMD_MAC_CONTROL                         0x0028
#define CMD_802_11_AD_HOC_START                 0x002b
#define CMD_802_11_AD_HOC_JOIN                  0x002c
#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
#define CMD_802_11_ENABLE_RSN                   0x002f
#define CMD_802_11_PAIRWISE_TSC                 0x0036
#define CMD_802_11_GROUP_TSC                    0x0037
#define CMD_802_11_SET_AFC                      0x003c
#define CMD_802_11_GET_AFC                      0x003d
#define CMD_802_11_AD_HOC_STOP                  0x0040
#define CMD_802_11_BEACON_STOP                  0x0049
#define CMD_802_11_MAC_ADDRESS                  0x004d
#define CMD_802_11_LED_GPIO_CTRL                0x004e
#define CMD_802_11_EEPROM_ACCESS                0x0059
#define CMD_802_11_BAND_CONFIG                  0x0058
#define CMD_802_11D_DOMAIN_INFO                 0x005b
#define CMD_802_11_KEY_MATERIAL                 0x005e
#define CMD_802_11_SLEEP_PARAMS                 0x0066
#define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
#define CMD_802_11_TPC_CFG                      0x0072
#define CMD_802_11_PWR_CFG                      0x0073
#define CMD_802_11_SUBSCRIBE_EVENT              0x0075
#define CMD_802_11_RATE_ADAPT_RATESET           0x0076
#define CMD_802_11_TX_RATE_QUERY                0x007f
#define CMD_GET_TSF                             0x0080
#define CMD_BT_ACCESS                           0x0087
#define CMD_FWT_ACCESS                          0x0095
#define CMD_802_11_MONITOR_MODE                 0x0098
#define CMD_MESH_ACCESS                         0x009b
#define CMD_MESH_CONFIG                         0x00a3
#define CMD_SET_BOOT2_VER                       0x00a5
#define CMD_802_11_BEACON_CTRL                  0x00b0

/* For the IEEE Power Save */
#define CMD_SUBCMD_ENTER_PS             0x0030
#define CMD_SUBCMD_EXIT_PS              0x0031
#define CMD_SUBCMD_SLEEP_CONFIRMED      0x0034
#define CMD_SUBCMD_FULL_POWERDOWN       0x0035
#define CMD_SUBCMD_FULL_POWERUP         0x0036

#define CMD_ENABLE_RSN                  0x0001
#define CMD_DISABLE_RSN                 0x0000

#define CMD_ACT_GET                     0x0000
#define CMD_ACT_SET                     0x0001
#define CMD_ACT_GET_AES                 0x0002
#define CMD_ACT_SET_AES                 0x0003
#define CMD_ACT_REMOVE_AES              0x0004

/* Define action or option for CMD_802_11_SET_WEP */
#define CMD_ACT_ADD                     0x0002
#define CMD_ACT_REMOVE                  0x0004
#define CMD_ACT_USE_DEFAULT             0x0008

#define CMD_TYPE_WEP_40_BIT             0x01
#define CMD_TYPE_WEP_104_BIT            0x02

#define CMD_NUM_OF_WEP_KEYS             4

#define CMD_WEP_KEY_INDEX_MASK          0x3fff

/* Define action or option for CMD_802_11_RESET */
#define CMD_ACT_HALT                    0x0003

/* Define action or option for CMD_802_11_SCAN */
#define CMD_BSS_TYPE_BSS                0x0001
#define CMD_BSS_TYPE_IBSS               0x0002
#define CMD_BSS_TYPE_ANY                0x0003

/* Define action or option for CMD_802_11_SCAN */
#define CMD_SCAN_TYPE_ACTIVE            0x0000
#define CMD_SCAN_TYPE_PASSIVE           0x0001

#define CMD_SCAN_RADIO_TYPE_BG          0

#define CMD_SCAN_PROBE_DELAY_TIME       0

/* Define action or option for CMD_MAC_CONTROL */
#define CMD_ACT_MAC_RX_ON                       0x0001
#define CMD_ACT_MAC_TX_ON                       0x0002
#define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
#define CMD_ACT_MAC_WEP_ENABLE                  0x0008
#define CMD_ACT_MAC_INT_ENABLE                  0x0010
#define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
#define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
#define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400

/* Define action or option for CMD_802_11_RADIO_CONTROL */
#define CMD_TYPE_AUTO_PREAMBLE          0x0001
#define CMD_TYPE_SHORT_PREAMBLE         0x0002
#define CMD_TYPE_LONG_PREAMBLE          0x0003

/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
#define CMD_SUBSCRIBE_RSSI_LOW          0x0001
#define CMD_SUBSCRIBE_SNR_LOW           0x0002
#define CMD_SUBSCRIBE_FAILCOUNT         0x0004
#define CMD_SUBSCRIBE_BCNMISS           0x0008
#define CMD_SUBSCRIBE_RSSI_HIGH         0x0010
#define CMD_SUBSCRIBE_SNR_HIGH          0x0020

#define TURN_ON_RF                      0x01
#define RADIO_ON                        0x01
#define RADIO_OFF                       0x00

#define SET_AUTO_PREAMBLE               0x05
#define SET_SHORT_PREAMBLE              0x03
#define SET_LONG_PREAMBLE               0x01

/* Define action or option for CMD_802_11_RF_CHANNEL */
#define CMD_OPT_802_11_RF_CHANNEL_GET   0x00
#define CMD_OPT_802_11_RF_CHANNEL_SET   0x01

/* Define action or option for CMD_802_11_RF_TX_POWER */
#define CMD_ACT_TX_POWER_OPT_GET        0x0000
#define CMD_ACT_TX_POWER_OPT_SET_HIGH   0x8007
#define CMD_ACT_TX_POWER_OPT_SET_MID    0x8004
#define CMD_ACT_TX_POWER_OPT_SET_LOW    0x8000

#define CMD_ACT_TX_POWER_INDEX_HIGH     0x0007
#define CMD_ACT_TX_POWER_INDEX_MID      0x0004
#define CMD_ACT_TX_POWER_INDEX_LOW      0x0000

/* Define action or option for CMD_802_11_DATA_RATE */
#define CMD_ACT_SET_TX_AUTO             0x0000
#define CMD_ACT_SET_TX_FIX_RATE         0x0001
#define CMD_ACT_GET_TX_RATE             0x0002

#define CMD_ACT_SET_RX                  0x0001
#define CMD_ACT_SET_TX                  0x0002
#define CMD_ACT_SET_BOTH                0x0003
#define CMD_ACT_GET_RX                  0x0004
#define CMD_ACT_GET_TX                  0x0008
#define CMD_ACT_GET_BOTH                0x000c

/* Define action or option for CMD_802_11_PS_MODE */
#define CMD_TYPE_CAM                    0x0000
#define CMD_TYPE_MAX_PSP                0x0001
#define CMD_TYPE_FAST_PSP               0x0002

/* Define action or option for CMD_BT_ACCESS */
enum cmd_bt_access_opts {
        /* The bt commands start at 5 instead of 1 because the old dft commands
         * are mapped to 1-4.  These old commands are no longer maintained and
         * should not be called.
         */
        CMD_ACT_BT_ACCESS_ADD = 5,
        CMD_ACT_BT_ACCESS_DEL,
        CMD_ACT_BT_ACCESS_LIST,
        CMD_ACT_BT_ACCESS_RESET,
        CMD_ACT_BT_ACCESS_SET_INVERT,
        CMD_ACT_BT_ACCESS_GET_INVERT
};

/* Define action or option for CMD_FWT_ACCESS */
enum cmd_fwt_access_opts {
        CMD_ACT_FWT_ACCESS_ADD = 1,
        CMD_ACT_FWT_ACCESS_DEL,
        CMD_ACT_FWT_ACCESS_LOOKUP,
        CMD_ACT_FWT_ACCESS_LIST,
        CMD_ACT_FWT_ACCESS_LIST_ROUTE,
        CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
        CMD_ACT_FWT_ACCESS_RESET,
        CMD_ACT_FWT_ACCESS_CLEANUP,
        CMD_ACT_FWT_ACCESS_TIME,
};

/* Define action or option for CMD_MESH_ACCESS */
enum cmd_mesh_access_opts {
        CMD_ACT_MESH_GET_TTL = 1,
        CMD_ACT_MESH_SET_TTL,
        CMD_ACT_MESH_GET_STATS,
        CMD_ACT_MESH_GET_ANYCAST,
        CMD_ACT_MESH_SET_ANYCAST,
        CMD_ACT_MESH_SET_LINK_COSTS,
        CMD_ACT_MESH_GET_LINK_COSTS,
        CMD_ACT_MESH_SET_BCAST_RATE,
        CMD_ACT_MESH_GET_BCAST_RATE,
        CMD_ACT_MESH_SET_RREQ_DELAY,
        CMD_ACT_MESH_GET_RREQ_DELAY,
        CMD_ACT_MESH_SET_ROUTE_EXP,
        CMD_ACT_MESH_GET_ROUTE_EXP,
        CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
        CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
};

/** Card Event definition */
#define MACREG_INT_CODE_TX_PPA_FREE             0
#define MACREG_INT_CODE_TX_DMA_DONE             1
#define MACREG_INT_CODE_LINK_LOST_W_SCAN        2
#define MACREG_INT_CODE_LINK_LOST_NO_SCAN       3
#define MACREG_INT_CODE_LINK_SENSED             4
#define MACREG_INT_CODE_CMD_FINISHED            5
#define MACREG_INT_CODE_MIB_CHANGED             6
#define MACREG_INT_CODE_INIT_DONE               7
#define MACREG_INT_CODE_DEAUTHENTICATED         8
#define MACREG_INT_CODE_DISASSOCIATED           9
#define MACREG_INT_CODE_PS_AWAKE                10
#define MACREG_INT_CODE_PS_SLEEP                11
#define MACREG_INT_CODE_MIC_ERR_MULTICAST       13
#define MACREG_INT_CODE_MIC_ERR_UNICAST         14
#define MACREG_INT_CODE_WM_AWAKE                15
#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE        16
#define MACREG_INT_CODE_ADHOC_BCN_LOST          17
#define MACREG_INT_CODE_HOST_AWAKE              18
#define MACREG_INT_CODE_STOP_TX                 19
#define MACREG_INT_CODE_START_TX                20
#define MACREG_INT_CODE_CHANNEL_SWITCH          21
#define MACREG_INT_CODE_MEASUREMENT_RDY         22
#define MACREG_INT_CODE_WMM_CHANGE              23
#define MACREG_INT_CODE_BG_SCAN_REPORT          24
#define MACREG_INT_CODE_RSSI_LOW                25
#define MACREG_INT_CODE_SNR_LOW                 26
#define MACREG_INT_CODE_MAX_FAIL                27
#define MACREG_INT_CODE_RSSI_HIGH               28
#define MACREG_INT_CODE_SNR_HIGH                29
#define MACREG_INT_CODE_MESH_AUTO_STARTED       35
#define MACREG_INT_CODE_FIRMWARE_READY          48

#endif