package/ead/src/tinysrp/bn_lcl.h

   1 /* crypto/bn/bn_lcl.h */
   2 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
   3  * All rights reserved.
   4  *
   5  * This package is an SSL implementation written
   6  * by Eric Young (eay@cryptsoft.com).
   7  * The implementation was written so as to conform with Netscapes SSL.
   8  *
   9  * This library is free for commercial and non-commercial use as long as
  10  * the following conditions are aheared to.  The following conditions
  11  * apply to all code found in this distribution, be it the RC4, RSA,
  12  * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
  13  * included with this distribution is covered by the same copyright terms
  14  * except that the holder is Tim Hudson (tjh@cryptsoft.com).
  15  *
  16  * Copyright remains Eric Young's, and as such any Copyright notices in
  17  * the code are not to be removed.
  18  * If this package is used in a product, Eric Young should be given attribution
  19  * as the author of the parts of the library used.
  20  * This can be in the form of a textual message at program startup or
  21  * in documentation (online or textual) provided with the package.
  22  *
  23  * Redistribution and use in source and binary forms, with or without
  24  * modification, are permitted provided that the following conditions
  25  * are met:
  26  * 1. Redistributions of source code must retain the copyright
  27  *    notice, this list of conditions and the following disclaimer.
  28  * 2. Redistributions in binary form must reproduce the above copyright
  29  *    notice, this list of conditions and the following disclaimer in the
  30  *    documentation and/or other materials provided with the distribution.
  31  * 3. All advertising materials mentioning features or use of this software
  32  *    must display the following acknowledgement:
  33  *    "This product includes cryptographic software written by
  34  *     Eric Young (eay@cryptsoft.com)"
  35  *    The word 'cryptographic' can be left out if the rouines from the library
  36  *    being used are not cryptographic related :-).
  37  * 4. If you include any Windows specific code (or a derivative thereof) from
  38  *    the apps directory (application code) you must include an acknowledgement:
  39  *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
  40  *
  41  * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
  42  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  43  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  44  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  45  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  46  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  47  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  48  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  49  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  50  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  51  * SUCH DAMAGE.
  52  *
  53  * The licence and distribution terms for any publically available version or
  54  * derivative of this code cannot be changed.  i.e. this code cannot simply be
  55  * copied and put under another distribution licence
  56  * [including the GNU Public Licence.]
  57  */
  58 /* ====================================================================
  59  * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
  60  *
  61  * Redistribution and use in source and binary forms, with or without
  62  * modification, are permitted provided that the following conditions
  63  * are met:
  64  *
  65  * 1. Redistributions of source code must retain the above copyright
  66  *    notice, this list of conditions and the following disclaimer.
  67  *
  68  * 2. Redistributions in binary form must reproduce the above copyright
  69  *    notice, this list of conditions and the following disclaimer in
  70  *    the documentation and/or other materials provided with the
  71  *    distribution.
  72  *
  73  * 3. All advertising materials mentioning features or use of this
  74  *    software must display the following acknowledgment:
  75  *    "This product includes software developed by the OpenSSL Project
  76  *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
  77  *
  78  * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
  79  *    endorse or promote products derived from this software without
  80  *    prior written permission. For written permission, please contact
  81  *    openssl-core@openssl.org.
  82  *
  83  * 5. Products derived from this software may not be called "OpenSSL"
  84  *    nor may "OpenSSL" appear in their names without prior written
  85  *    permission of the OpenSSL Project.
  86  *
  87  * 6. Redistributions of any form whatsoever must retain the following
  88  *    acknowledgment:
  89  *    "This product includes software developed by the OpenSSL Project
  90  *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
  91  *
  92  * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
  93  * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  94  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  95  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
  96  * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  97  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  98  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  99  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 100  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 101  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 102  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 103  * OF THE POSSIBILITY OF SUCH DAMAGE.
 104  * ====================================================================
 105  *
 106  * This product includes cryptographic software written by Eric Young
 107  * (eay@cryptsoft.com).  This product includes software written by Tim
 108  * Hudson (tjh@cryptsoft.com).
 109  *
 110  */
 111
 112 #ifndef HEADER_BN_LCL_H
 113 #define HEADER_BN_LCL_H
 114
 115 #include <bn.h>
 116
 117 #ifdef  __cplusplus
 118 extern "C" {
 119 #endif
 120
 121
 122 /*
 123  * BN_window_bits_for_exponent_size -- macro for sliding window mod_exp functions
 124  *
 125  *
 126  * For window size 'w' (w >= 2) and a random 'b' bits exponent,
 127  * the number of multiplications is a constant plus on average
 128  *
 129  *    2^(w-1) + (b-w)/(w+1);
 130  *
 131  * here  2^(w-1)  is for precomputing the table (we actually need
 132  * entries only for windows that have the lowest bit set), and
 133  * (b-w)/(w+1)  is an approximation for the expected number of
 134  * w-bit windows, not counting the first one.
 135  *
 136  * Thus we should use
 137  *
 138  *    w >= 6  if        b > 671
 139  *     w = 5  if  671 > b > 239
 140  *     w = 4  if  239 > b >  79
 141  *     w = 3  if   79 > b >  23
 142  *    w <= 2  if   23 > b
 143  *
 144  * (with draws in between).  Very small exponents are often selected
 145  * with low Hamming weight, so we use  w = 1  for b <= 23.
 146  */
 147 #if 1
 148 #define BN_window_bits_for_exponent_size(b) \
 149                 ((b) > 671 ? 6 : \
 150                  (b) > 239 ? 5 : \
 151                  (b) >  79 ? 4 : \
 152                  (b) >  23 ? 3 : 1)
 153 #else
 154 /* Old SSLeay/OpenSSL table.
 155  * Maximum window size was 5, so this table differs for b==1024;
 156  * but it coincides for other interesting values (b==160, b==512).
 157  */
 158 #define BN_window_bits_for_exponent_size(b) \
 159                 ((b) > 255 ? 5 : \
 160                  (b) > 127 ? 4 : \
 161                  (b) >  17 ? 3 : 1)
 162 #endif
 163
 164
 165
 166 /* Pentium pro 16,16,16,32,64 */
 167 /* Alpha       16,16,16,16.64 */
 168 #define BN_MULL_SIZE_NORMAL                     (16) /* 32 */
 169 #define BN_MUL_RECURSIVE_SIZE_NORMAL            (16) /* 32 less than */
 170 #define BN_SQR_RECURSIVE_SIZE_NORMAL            (16) /* 32 */
 171 #define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL        (32) /* 32 */
 172 #define BN_MONT_CTX_SET_SIZE_WORD               (64) /* 32 */
 173
 174 #if !defined(NO_ASM) && !defined(NO_INLINE_ASM) && !defined(PEDANTIC)
 175 /*
 176  * BN_UMULT_HIGH section.
 177  *
 178  * No, I'm not trying to overwhelm you when stating that the
 179  * product of N-bit numbers is 2*N bits wide:-) No, I don't expect
 180  * you to be impressed when I say that if the compiler doesn't
 181  * support 2*N integer type, then you have to replace every N*N
 182  * multiplication with 4 (N/2)*(N/2) accompanied by some shifts
 183  * and additions which unavoidably results in severe performance
 184  * penalties. Of course provided that the hardware is capable of
 185  * producing 2*N result... That's when you normally start
 186  * considering assembler implementation. However! It should be
 187  * pointed out that some CPUs (most notably Alpha, PowerPC and
 188  * upcoming IA-64 family:-) provide *separate* instruction
 189  * calculating the upper half of the product placing the result
 190  * into a general purpose register. Now *if* the compiler supports
 191  * inline assembler, then it's not impossible to implement the
 192  * "bignum" routines (and have the compiler optimize 'em)
 193  * exhibiting "native" performance in C. That's what BN_UMULT_HIGH
 194  * macro is about:-)
 195  *
 196  *                                      <appro@fy.chalmers.se>
 197  */
 198 # if defined(__alpha) && (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT))
 199 #  if defined(__DECC)
 200 #   include <c_asm.h>
 201 #   define BN_UMULT_HIGH(a,b)   (BN_ULONG)asm("umulh %a0,%a1,%v0",(a),(b))
 202 #  elif defined(__GNUC__)
 203 #   define BN_UMULT_HIGH(a,b)   ({      \
 204         register BN_ULONG ret;          \
 205         asm ("umulh     %1,%2,%0"       \
 206              : "=r"(ret)                \
 207              : "r"(a), "r"(b));         \
 208         ret;                    })
 209 #  endif        /* compiler */
 210 # elif defined(_ARCH_PPC) && defined(__64BIT__) && defined(SIXTY_FOUR_BIT_LONG)
 211 #  if defined(__GNUC__)
 212 #   define BN_UMULT_HIGH(a,b)   ({      \
 213         register BN_ULONG ret;          \
 214         asm ("mulhdu    %0,%1,%2"       \
 215              : "=r"(ret)                \
 216              : "r"(a), "r"(b));         \
 217         ret;                    })
 218 #  endif        /* compiler */
 219 # endif         /* cpu */
 220 #endif          /* NO_ASM */
 221
 222 /*************************************************************
 223  * Using the long long type
 224  */
 225 #define Lw(t)    (((BN_ULONG)(t))&BN_MASK2)
 226 #define Hw(t)    (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2)
 227
 228 /* This is used for internal error checking and is not normally used */
 229 #ifdef BN_DEBUG
 230 # include <assert.h>
 231 # define bn_check_top(a) assert ((a)->top >= 0 && (a)->top <= (a)->dmax);
 232 #else
 233 # define bn_check_top(a)
 234 #endif
 235
 236 /* This macro is to add extra stuff for development checking */
 237 #ifdef BN_DEBUG
 238 #define bn_set_max(r) ((r)->max=(r)->top,BN_set_flags((r),BN_FLG_STATIC_DATA))
 239 #else
 240 #define bn_set_max(r)
 241 #endif
 242
 243 /* These macros are used to 'take' a section of a bignum for read only use */
 244 #define bn_set_low(r,a,n) \
 245         { \
 246         (r)->top=((a)->top > (n))?(n):(a)->top; \
 247         (r)->d=(a)->d; \
 248         (r)->neg=(a)->neg; \
 249         (r)->flags|=BN_FLG_STATIC_DATA; \
 250         bn_set_max(r); \
 251         }
 252
 253 #define bn_set_high(r,a,n) \
 254         { \
 255         if ((a)->top > (n)) \
 256                 { \
 257                 (r)->top=(a)->top-n; \
 258                 (r)->d= &((a)->d[n]); \
 259                 } \
 260         else \
 261                 (r)->top=0; \
 262         (r)->neg=(a)->neg; \
 263         (r)->flags|=BN_FLG_STATIC_DATA; \
 264         bn_set_max(r); \
 265         }
 266
 267 #ifdef BN_LLONG
 268 #define mul_add(r,a,w,c) { \
 269         BN_ULLONG t; \
 270         t=(BN_ULLONG)w * (a) + (r) + (c); \
 271         (r)= Lw(t); \
 272         (c)= Hw(t); \
 273         }
 274
 275 #define mul(r,a,w,c) { \
 276         BN_ULLONG t; \
 277         t=(BN_ULLONG)w * (a) + (c); \
 278         (r)= Lw(t); \
 279         (c)= Hw(t); \
 280         }
 281
 282 #define sqr(r0,r1,a) { \
 283         BN_ULLONG t; \
 284         t=(BN_ULLONG)(a)*(a); \
 285         (r0)=Lw(t); \
 286         (r1)=Hw(t); \
 287         }
 288
 289 #elif defined(BN_UMULT_HIGH)
 290 #define mul_add(r,a,w,c) {              \
 291         BN_ULONG high,low,ret,tmp=(a);  \
 292         ret =  (r);                     \
 293         high=  BN_UMULT_HIGH(w,tmp);    \
 294         ret += (c);                     \
 295         low =  (w) * tmp;               \
 296         (c) =  (ret<(c))?1:0;           \
 297         (c) += high;                    \
 298         ret += low;                     \
 299         (c) += (ret<low)?1:0;           \
 300         (r) =  ret;                     \
 301         }
 302
 303 #define mul(r,a,w,c)    {               \
 304         BN_ULONG high,low,ret,ta=(a);   \
 305         low =  (w) * ta;                \
 306         high=  BN_UMULT_HIGH(w,ta);     \
 307         ret =  low + (c);               \
 308         (c) =  high;                    \
 309         (c) += (ret<low)?1:0;           \
 310         (r) =  ret;                     \
 311         }
 312
 313 #define sqr(r0,r1,a)    {               \
 314         BN_ULONG tmp=(a);               \
 315         (r0) = tmp * tmp;               \
 316         (r1) = BN_UMULT_HIGH(tmp,tmp);  \
 317         }
 318
 319 #else
 320 /*************************************************************
 321  * No long long type
 322  */
 323
 324 #define LBITS(a)        ((a)&BN_MASK2l)
 325 #define HBITS(a)        (((a)>>BN_BITS4)&BN_MASK2l)
 326 #define L2HBITS(a)      ((BN_ULONG)((a)&BN_MASK2l)<<BN_BITS4)
 327
 328 #define LLBITS(a)       ((a)&BN_MASKl)
 329 #define LHBITS(a)       (((a)>>BN_BITS2)&BN_MASKl)
 330 #define LL2HBITS(a)     ((BN_ULLONG)((a)&BN_MASKl)<<BN_BITS2)
 331
 332 #define mul64(l,h,bl,bh) \
 333         { \
 334         BN_ULONG m,m1,lt,ht; \
 335  \
 336         lt=l; \
 337         ht=h; \
 338         m =(bh)*(lt); \
 339         lt=(bl)*(lt); \
 340         m1=(bl)*(ht); \
 341         ht =(bh)*(ht); \
 342         m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS(1L); \
 343         ht+=HBITS(m); \
 344         m1=L2HBITS(m); \
 345         lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \
 346         (l)=lt; \
 347         (h)=ht; \
 348         }
 349
 350 #define sqr64(lo,ho,in) \
 351         { \
 352         BN_ULONG l,h,m; \
 353  \
 354         h=(in); \
 355         l=LBITS(h); \
 356         h=HBITS(h); \
 357         m =(l)*(h); \
 358         l*=l; \
 359         h*=h; \
 360         h+=(m&BN_MASK2h1)>>(BN_BITS4-1); \
 361         m =(m&BN_MASK2l)<<(BN_BITS4+1); \
 362         l=(l+m)&BN_MASK2; if (l < m) h++; \
 363         (lo)=l; \
 364         (ho)=h; \
 365         }
 366
 367 #define mul_add(r,a,bl,bh,c) { \
 368         BN_ULONG l,h; \
 369  \
 370         h= (a); \
 371         l=LBITS(h); \
 372         h=HBITS(h); \
 373         mul64(l,h,(bl),(bh)); \
 374  \
 375         /* non-multiply part */ \
 376         l=(l+(c))&BN_MASK2; if (l < (c)) h++; \
 377         (c)=(r); \
 378         l=(l+(c))&BN_MASK2; if (l < (c)) h++; \
 379         (c)=h&BN_MASK2; \
 380         (r)=l; \
 381         }
 382
 383 #define mul(r,a,bl,bh,c) { \
 384         BN_ULONG l,h; \
 385  \
 386         h= (a); \
 387         l=LBITS(h); \
 388         h=HBITS(h); \
 389         mul64(l,h,(bl),(bh)); \
 390  \
 391         /* non-multiply part */ \
 392         l+=(c); if ((l&BN_MASK2) < (c)) h++; \
 393         (c)=h&BN_MASK2; \
 394         (r)=l&BN_MASK2; \
 395         }
 396 #endif /* !BN_LLONG */
 397
 398 void bn_mul_normal(BN_ULONG *r,BN_ULONG *a,int na,BN_ULONG *b,int nb);
 399 void bn_mul_comba8(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
 400 void bn_mul_comba4(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
 401 void bn_sqr_normal(BN_ULONG *r, BN_ULONG *a, int n, BN_ULONG *tmp);
 402 void bn_sqr_comba8(BN_ULONG *r,BN_ULONG *a);
 403 void bn_sqr_comba4(BN_ULONG *r,BN_ULONG *a);
 404 int bn_cmp_words(BN_ULONG *a,BN_ULONG *b,int n);
 405 void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,BN_ULONG *t);
 406 void bn_mul_part_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,
 407         int tn, int n,BN_ULONG *t);
 408 void bn_sqr_recursive(BN_ULONG *r,BN_ULONG *a, int n2, BN_ULONG *t);
 409 void bn_mul_low_normal(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, int n);
 410 void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
 411         BN_ULONG *t);
 412 void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2,
 413         BN_ULONG *t);
 414
 415 #ifdef  __cplusplus
 416 }
 417 #endif
 418
 419 #endif