[atheros] enable mtu & mac config options
[openwrt.git] / target / linux / adm5120 / files / drivers / usb / host / adm5120-pm.c
1 /*
2 * ADM5120 HCD (Host Controller Driver) for USB
3 *
4 * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
5 *
6 * This file was derived from fragments of the OHCI driver.
7 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
8 * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License version 2 as published
12 * by the Free Software Foundation.
13 *
14 */
15
16 #define OHCI_SCHED_ENABLES \
17 (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
18
19 #ifdef CONFIG_PM
20 static int admhc_restart(struct admhcd *ahcd);
21
22 static int admhc_rh_suspend(struct admhcd *ahcd, int autostop)
23 __releases(ahcd->lock)
24 __acquires(ahcd->lock)
25 {
26 int status = 0;
27
28 ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
29 switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
30 case OHCI_USB_RESUME:
31 admhc_dbg(ahcd, "resume/suspend?\n");
32 ahcd->hc_control &= ~OHCI_CTRL_HCFS;
33 ahcd->hc_control |= OHCI_USB_RESET;
34 admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
35 (void) admhc_readl(ahcd, &ahcd->regs->control);
36 /* FALL THROUGH */
37 case OHCI_USB_RESET:
38 status = -EBUSY;
39 admhc_dbg(ahcd, "needs reinit!\n");
40 goto done;
41 case OHCI_USB_SUSPEND:
42 if (!ahcd->autostop) {
43 admhc_dbg(ahcd, "already suspended\n");
44 goto done;
45 }
46 }
47 admhc_dbg(ahcd, "%s root hub\n",
48 autostop ? "auto-stop" : "suspend");
49
50 /* First stop any processing */
51 if (!autostop && (ahcd->hc_control & OHCI_SCHED_ENABLES)) {
52 ahcd->hc_control &= ~OHCI_SCHED_ENABLES;
53 admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
54 ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
55 admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->intrstatus);
56
57 /* sched disables take effect on the next frame,
58 * then the last WDH could take 6+ msec
59 */
60 admhc_dbg(ahcd, "stopping schedules ...\n");
61 ahcd->autostop = 0;
62 spin_unlock_irq (&ahcd->lock);
63 msleep (8);
64 spin_lock_irq(&ahcd->lock);
65 }
66 dl_done_list (ahcd);
67 finish_unlinks (ahcd, admhc_frame_no(ahcd));
68
69 /* maybe resume can wake root hub */
70 if (device_may_wakeup(&admhcd_to_hcd(ahcd)->self.root_hub->dev) ||
71 autostop)
72 ahcd->hc_control |= OHCI_CTRL_RWE;
73 else {
74 admhc_writel(ahcd, OHCI_INTR_RHSC, &ahcd->regs->intrdisable);
75 ahcd->hc_control &= ~OHCI_CTRL_RWE;
76 }
77
78 /* Suspend hub ... this is the "global (to this bus) suspend" mode,
79 * which doesn't imply ports will first be individually suspended.
80 */
81 ahcd->hc_control &= ~OHCI_CTRL_HCFS;
82 ahcd->hc_control |= OHCI_USB_SUSPEND;
83 admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
84 (void) admhc_readl(ahcd, &ahcd->regs->control);
85
86 /* no resumes until devices finish suspending */
87 if (!autostop) {
88 ahcd->next_statechange = jiffies + msecs_to_jiffies (5);
89 ahcd->autostop = 0;
90 }
91
92 done:
93 return status;
94 }
95
96 static inline struct ed *find_head(struct ed *ed)
97 {
98 /* for bulk and control lists */
99 while (ed->ed_prev)
100 ed = ed->ed_prev;
101 return ed;
102 }
103
104 /* caller has locked the root hub */
105 static int admhc_rh_resume(struct admhcd *ahcd)
106 __releases(ahcd->lock)
107 __acquires(ahcd->lock)
108 {
109 struct usb_hcd *hcd = admhcd_to_hcd (ahcd);
110 u32 temp, enables;
111 int status = -EINPROGRESS;
112 int autostopped = ahcd->autostop;
113
114 ahcd->autostop = 0;
115 ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
116
117 if (ahcd->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
118 /* this can happen after resuming a swsusp snapshot */
119 if (hcd->state == HC_STATE_RESUMING) {
120 admhc_dbg(ahcd, "BIOS/SMM active, control %03x\n",
121 ahcd->hc_control);
122 status = -EBUSY;
123 /* this happens when pmcore resumes HC then root */
124 } else {
125 admhc_dbg(ahcd, "duplicate resume\n");
126 status = 0;
127 }
128 } else switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
129 case OHCI_USB_SUSPEND:
130 ahcd->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
131 ahcd->hc_control |= OHCI_USB_RESUME;
132 admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
133 (void) admhc_readl(ahcd, &ahcd->regs->control);
134 admhc_dbg(ahcd, "%s root hub\n",
135 autostopped ? "auto-start" : "resume");
136 break;
137 case OHCI_USB_RESUME:
138 /* HCFS changes sometime after INTR_RD */
139 admhc_dbg(ahcd, "%swakeup root hub\n",
140 autostopped ? "auto-" : "");
141 break;
142 case OHCI_USB_OPER:
143 /* this can happen after resuming a swsusp snapshot */
144 admhc_dbg(ahcd, "snapshot resume? reinit\n");
145 status = -EBUSY;
146 break;
147 default: /* RESET, we lost power */
148 admhc_dbg(ahcd, "lost power\n");
149 status = -EBUSY;
150 }
151 if (status == -EBUSY) {
152 if (!autostopped) {
153 spin_unlock_irq (&ahcd->lock);
154 (void) ahcd_init (ahcd);
155 status = admhc_restart (ahcd);
156 spin_lock_irq(&ahcd->lock);
157 }
158 return status;
159 }
160 if (status != -EINPROGRESS)
161 return status;
162 if (autostopped)
163 goto skip_resume;
164 spin_unlock_irq (&ahcd->lock);
165
166 /* Some controllers (lucent erratum) need extra-long delays */
167 msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
168
169 temp = admhc_readl(ahcd, &ahcd->regs->control);
170 temp &= OHCI_CTRL_HCFS;
171 if (temp != OHCI_USB_RESUME) {
172 admhc_err (ahcd, "controller won't resume\n");
173 spin_lock_irq(&ahcd->lock);
174 return -EBUSY;
175 }
176
177 /* disable old schedule state, reinit from scratch */
178 admhc_writel(ahcd, 0, &ahcd->regs->ed_controlhead);
179 admhc_writel(ahcd, 0, &ahcd->regs->ed_controlcurrent);
180 admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkhead);
181 admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkcurrent);
182 admhc_writel(ahcd, 0, &ahcd->regs->ed_periodcurrent);
183 admhc_writel(ahcd, (u32) ahcd->hcca_dma, &ahcd->ahcd->regs->hcca);
184
185 /* Sometimes PCI D3 suspend trashes frame timings ... */
186 periodic_reinit(ahcd);
187
188 /* the following code is executed with ahcd->lock held and
189 * irqs disabled if and only if autostopped is true
190 */
191
192 skip_resume:
193 /* interrupts might have been disabled */
194 admhc_writel(ahcd, OHCI_INTR_INIT, &ahcd->regs->int_enable);
195 if (ahcd->ed_rm_list)
196 admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->int_enable);
197
198 /* Then re-enable operations */
199 admhc_writel(ahcd, OHCI_USB_OPER, &ahcd->regs->control);
200 (void) admhc_readl(ahcd, &ahcd->regs->control);
201 if (!autostopped)
202 msleep (3);
203
204 temp = ahcd->hc_control;
205 temp &= OHCI_CTRL_RWC;
206 temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
207 ahcd->hc_control = temp;
208 admhc_writel(ahcd, temp, &ahcd->regs->control);
209 (void) admhc_readl(ahcd, &ahcd->regs->control);
210
211 /* TRSMRCY */
212 if (!autostopped) {
213 msleep (10);
214 spin_lock_irq(&ahcd->lock);
215 }
216 /* now ahcd->lock is always held and irqs are always disabled */
217
218 /* keep it alive for more than ~5x suspend + resume costs */
219 ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
220
221 /* maybe turn schedules back on */
222 enables = 0;
223 temp = 0;
224 if (!ahcd->ed_rm_list) {
225 if (ahcd->ed_controltail) {
226 admhc_writel(ahcd,
227 find_head (ahcd->ed_controltail)->dma,
228 &ahcd->regs->ed_controlhead);
229 enables |= OHCI_CTRL_CLE;
230 temp |= OHCI_CLF;
231 }
232 if (ahcd->ed_bulktail) {
233 admhc_writel(ahcd, find_head (ahcd->ed_bulktail)->dma,
234 &ahcd->regs->ed_bulkhead);
235 enables |= OHCI_CTRL_BLE;
236 temp |= OHCI_BLF;
237 }
238 }
239 if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
240 enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
241 if (enables) {
242 admhc_dbg(ahcd, "restarting schedules ... %08x\n", enables);
243 ahcd->hc_control |= enables;
244 admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
245 if (temp)
246 admhc_writel(ahcd, temp, &ahcd->regs->cmdstatus);
247 (void) admhc_readl(ahcd, &ahcd->regs->control);
248 }
249
250 return 0;
251 }
252
253 static int admhc_bus_suspend(struct usb_hcd *hcd)
254 {
255 struct admhcd *ahcd = hcd_to_admhcd(hcd);
256 int rc;
257
258 spin_lock_irq(&ahcd->lock);
259
260 if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
261 rc = -ESHUTDOWN;
262 else
263 rc = admhc_rh_suspend(ahcd, 0);
264 spin_unlock_irq(&ahcd->lock);
265 return rc;
266 }
267
268 static int admhc_bus_resume(struct usb_hcd *hcd)
269 {
270 struct admhcd *ahcd = hcd_to_admhcd(hcd);
271 int rc;
272
273 if (time_before(jiffies, ahcd->next_statechange))
274 msleep(5);
275
276 spin_lock_irq(&ahcd->lock);
277
278 if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
279 rc = -ESHUTDOWN;
280 else
281 rc = admhc_rh_resume(ahcd);
282 spin_unlock_irq(&ahcd->lock);
283
284 /* poll until we know a device is connected or we autostop */
285 if (rc == 0)
286 usb_hcd_poll_rh_status(hcd);
287 return rc;
288 }
289
290 /* Carry out polling-, autostop-, and autoresume-related state changes */
291 static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
292 int any_connected)
293 {
294 int poll_rh = 1;
295
296 switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
297
298 case OHCI_USB_OPER:
299 /* keep on polling until we know a device is connected
300 * and RHSC is enabled */
301 if (!ahcd->autostop) {
302 if (any_connected ||
303 !device_may_wakeup(&admhcd_to_hcd(ahcd)
304 ->self.root_hub->dev)) {
305 if (admhc_readl(ahcd, &ahcd->regs->int_enable) &
306 OHCI_INTR_RHSC)
307 poll_rh = 0;
308 } else {
309 ahcd->autostop = 1;
310 ahcd->next_statechange = jiffies + HZ;
311 }
312
313 /* if no devices have been attached for one second, autostop */
314 } else {
315 if (changed || any_connected) {
316 ahcd->autostop = 0;
317 ahcd->next_statechange = jiffies +
318 STATECHANGE_DELAY;
319 } else if (time_after_eq(jiffies,
320 ahcd->next_statechange)
321 && !ahcd->ed_rm_list
322 && !(ahcd->hc_control &
323 OHCI_SCHED_ENABLES)) {
324 ahcd_rh_suspend(ahcd, 1);
325 }
326 }
327 break;
328
329 /* if there is a port change, autostart or ask to be resumed */
330 case OHCI_USB_SUSPEND:
331 case OHCI_USB_RESUME:
332 if (changed) {
333 if (ahcd->autostop)
334 admhc_rh_resume(ahcd);
335 else
336 usb_hcd_resume_root_hub(admhcd_to_hcd(ahcd));
337 } else {
338 /* everything is idle, no need for polling */
339 poll_rh = 0;
340 }
341 break;
342 }
343 return poll_rh;
344 }
345
346 /*-------------------------------------------------------------------------*/
347
348 /* must not be called from interrupt context */
349 static int admhc_restart(struct admhcd *ahcd)
350 {
351 int temp;
352 int i;
353 struct urb_priv *priv;
354
355 /* mark any devices gone, so they do nothing till khubd disconnects.
356 * recycle any "live" eds/tds (and urbs) right away.
357 * later, khubd disconnect processing will recycle the other state,
358 * (either as disconnect/reconnect, or maybe someday as a reset).
359 */
360 spin_lock_irq(&ahcd->lock);
361 admhc_disable(ahcd);
362 usb_root_hub_lost_power(admhcd_to_hcd(ahcd)->self.root_hub);
363 if (!list_empty(&ahcd->pending))
364 admhc_dbg(ahcd, "abort schedule...\n");
365 list_for_each_entry(priv, &ahcd->pending, pending) {
366 struct urb *urb = priv->td[0]->urb;
367 struct ed *ed = priv->ed;
368
369 switch (ed->state) {
370 case ED_OPER:
371 ed->state = ED_UNLINK;
372 ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
373 ed_deschedule (ahcd, ed);
374
375 ed->ed_next = ahcd->ed_rm_list;
376 ed->ed_prev = NULL;
377 ahcd->ed_rm_list = ed;
378 /* FALLTHROUGH */
379 case ED_UNLINK:
380 break;
381 default:
382 admhc_dbg(ahcd, "bogus ed %p state %d\n",
383 ed, ed->state);
384 }
385
386 if (!urb->unlinked)
387 urb->unlinked = -ESHUTDOWN;
388 }
389 finish_unlinks(ahcd, 0);
390 spin_unlock_irq(&ahcd->lock);
391
392 /* paranoia, in case that didn't work: */
393
394 /* empty the interrupt branches */
395 for (i = 0; i < NUM_INTS; i++) ahcd->load[i] = 0;
396 for (i = 0; i < NUM_INTS; i++) ahcd->hcca->int_table[i] = 0;
397
398 /* no EDs to remove */
399 ahcd->ed_rm_list = NULL;
400
401 /* empty control and bulk lists */
402 ahcd->ed_controltail = NULL;
403 ahcd->ed_bulktail = NULL;
404
405 if ((temp = admhc_run(ahcd)) < 0) {
406 admhc_err(ahcd, "can't restart, %d\n", temp);
407 return temp;
408 } else {
409 /* here we "know" root ports should always stay powered,
410 * and that if we try to turn them back on the root hub
411 * will respond to CSC processing.
412 */
413 i = ahcd->num_ports;
414 while (i--)
415 admhc_writel(ahcd, RH_PS_PSS,
416 &ahcd->regs->portstatus[i]);
417 admhc_dbg(ahcd, "restart complete\n");
418 }
419 return 0;
420 }
421
422 #else /* CONFIG_PM */
423
424 static inline int admhc_rh_resume(struct admhcd *ahcd)
425 {
426 return 0;
427 }
428
429 /* Carry out polling-related state changes.
430 * autostop isn't used when CONFIG_PM is turned off.
431 */
432 static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
433 int any_connected)
434 {
435 /* If INSM is enabled, don't poll */
436 if (admhc_readl(ahcd, &ahcd->regs->int_enable) & ADMHC_INTR_INSM)
437 return 0;
438
439 /* If no status changes are pending, enable status-change interrupts */
440 if (!changed) {
441 admhc_intr_enable(ahcd, ADMHC_INTR_INSM);
442 return 0;
443 }
444
445 return 1;
446 }
447
448 #endif /* CONFIG_PM */
449
This page took 0.104934 seconds and 5 git commands to generate.