remove 2.6.23 support, as the last target using that has been nuked, too
[openwrt.git] / target / linux / generic-2.6 / files-2.6.23 / drivers / ssb / driver_extif.c
1 /*
2 * Sonics Silicon Backplane
3 * Broadcom EXTIF core driver
4 *
5 * Copyright 2005, Broadcom Corporation
6 * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
7 * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
8 * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
9 *
10 * Licensed under the GNU/GPL. See COPYING for details.
11 */
12
13 #include <linux/serial.h>
14 #include <linux/serial_core.h>
15 #include <linux/serial_reg.h>
16
17 #include "ssb_private.h"
18
19
20 static inline u32 extif_read32(struct ssb_extif *extif, u16 offset)
21 {
22 return ssb_read32(extif->dev, offset);
23 }
24
25 static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value)
26 {
27 ssb_write32(extif->dev, offset, value);
28 }
29
30 static inline void extif_write32_masked(struct ssb_extif *extif, u16 offset,
31 u32 mask, u32 value)
32 {
33 value &= mask;
34 value |= extif_read32(extif, offset) & ~mask;
35 extif_write32(extif, offset, value);
36 }
37
38 #ifdef CONFIG_SSB_SERIAL
39 static bool serial_exists(u8 *regs)
40 {
41 u8 save_mcr, msr = 0;
42
43 if (regs) {
44 save_mcr = regs[UART_MCR];
45 regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS);
46 msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI
47 | UART_MSR_CTS | UART_MSR_DSR);
48 regs[UART_MCR] = save_mcr;
49 }
50 return (msr == (UART_MSR_DCD | UART_MSR_CTS));
51 }
52
53 int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports)
54 {
55 u32 i, nr_ports = 0;
56
57 /* Disable GPIO interrupt initially */
58 extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0);
59 extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0);
60
61 for (i = 0; i < 2; i++) {
62 void __iomem *uart_regs;
63
64 uart_regs = ioremap_nocache(SSB_EUART, 16);
65 if (uart_regs) {
66 uart_regs += (i * 8);
67
68 if (serial_exists(uart_regs) && ports) {
69 extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2);
70
71 nr_ports++;
72 ports[i].regs = uart_regs;
73 ports[i].irq = 2;
74 ports[i].baud_base = 13500000;
75 ports[i].reg_shift = 0;
76 }
77 iounmap(uart_regs);
78 }
79 }
80 return nr_ports;
81 }
82 #endif /* CONFIG_SSB_SERIAL */
83
84 void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns)
85 {
86 u32 tmp;
87
88 /* Initialize extif so we can get to the LEDs and external UART */
89 extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN);
90
91 /* Set timing for the flash */
92 tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
93 tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;
94 tmp |= DIV_ROUND_UP(120, ns);
95 extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
96
97 /* Set programmable interface timing for external uart */
98 tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
99 tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;
100 tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT;
101 tmp |= DIV_ROUND_UP(120, ns);
102 extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
103 }
104
105 void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
106 u32 *pll_type, u32 *n, u32 *m)
107 {
108 *pll_type = SSB_PLLTYPE_1;
109 *n = extif_read32(extif, SSB_EXTIF_CLOCK_N);
110 *m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
111 }
112
113 u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
114 {
115 return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
116 }
117
118 void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
119 {
120 return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
121 mask, value);
122 }
123
124 void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
125 {
126 return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
127 mask, value);
128 }
129
This page took 0.050832 seconds and 5 git commands to generate.