target/linux/lantiq/patches-3.2/208-fix-mach-easy98000.patch

   1 --- a/arch/mips/lantiq/falcon/mach-easy98000.c
   2 +++ b/arch/mips/lantiq/falcon/mach-easy98000.c
   3 @@ -17,10 +17,11 @@
   4  #include <linux/spi/eeprom.h>
   5  #include <falcon/lantiq_soc.h>
   6
   7 +#include <dev-gpio-leds.h>
   8 +
   9  #include "../machtypes.h"
  10
  11  #include "devices.h"
  12 -#include "dev-leds-gpio.h"
  13
  14  #define EASY98000_GPIO_LED_0 9
  15  #define EASY98000_GPIO_LED_1 10
  16 @@ -29,7 +30,16 @@
  17  #define EASY98000_GPIO_LED_4 13
  18  #define EASY98000_GPIO_LED_5 14
  19
  20 -extern unsigned char ltq_ethaddr[6];
  21 +static unsigned char ltq_ethaddr[6] = {0};
  22 +
  23 +static int __init falcon_set_ethaddr(char *str)
  24 +{
  25 +       sscanf(str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
  26 +               &ltq_ethaddr[0], &ltq_ethaddr[1], &ltq_ethaddr[2],
  27 +               &ltq_ethaddr[3], &ltq_ethaddr[4], &ltq_ethaddr[5]);
  28 +       return 0;
  29 +}
  30 +__setup("ethaddr=", falcon_set_ethaddr);
  31
  32  static struct mtd_partition easy98000_nor_partitions[] =
  33  {
  34 @@ -70,7 +80,7 @@ static struct spi_board_info easy98000_s
  35         .platform_data          = &easy98000_spi_flash_platform_data
  36  };
  37
  38 -static struct gpio_led easy98000_leds_gpio[] __initdata = {
  39 +static struct gpio_led easy98000_gpio_leds[] __initdata = {
  40         {
  41                 .name           = "easy98000:green:0",
  42                 .gpio           = EASY98000_GPIO_LED_0,
  43 @@ -104,12 +114,11 @@ static struct gpio_led easy98000_leds_gp
  44
  45  static struct dm9000_plat_data dm9000_plat_data = {
  46         .flags = DM9000_PLATF_8BITONLY,
  47 -       //.dev_addr = { }, /* possibility to provide an ethernet address for the chip */
  48  };
  49
  50  static struct resource dm9000_resources[] = {
  51 -       MEM_RES("dm9000_io", DM9000_IO, DM9000_IO),
  52 -       MEM_RES("dm9000_data", DM9000_DATA, DM9000_DATA),
  53 +       MEM_RES("dm9000_io", DM9000_IO, 1),
  54 +       MEM_RES("dm9000_data", DM9000_DATA, 1),
  55         [2] = {
  56                 /* with irq (210 -> gpio 110) the driver is very unreliable */
  57                 .start  = -1,           /* use polling */
  58 @@ -214,8 +223,8 @@ easy98000_init_common(void)
  59         falcon_register_i2c();
  60         platform_device_register(&easy98000_i2c_gpio_device);
  61         register_davicom();
  62 -       ltq_add_device_leds_gpio(-1, ARRAY_SIZE(easy98000_leds_gpio),
  63 -               easy98000_leds_gpio);
  64 +       ltq_add_device_gpio_leds(-1, ARRAY_SIZE(easy98000_gpio_leds),
  65 +               easy98000_gpio_leds);
  66         register_easy98000_cpld();
  67         easy98000_spi_gpio_init();
  68  }