[amazon] move files to correct position
[openwrt.git] / target / linux / generic-2.4 / patches / 109-ipsec_nat_traversal.patch
1 packaging/utils/nattpatch 2.4
2 --- a/include/net/sock.h
3 +++ b/include/net/sock.h
4 @@ -488,7 +488,13 @@ struct tcp_opt {
5 } bictcp;
6 };
7
8 -
9 +#if 1
10 +#define UDP_OPT_IN_SOCK 1
11 +struct udp_opt {
12 + __u32 esp_in_udp;
13 +};
14 +#endif
15 +
16 /*
17 * This structure really needs to be cleaned up.
18 * Most of it is for TCP, and not used by any of
19 @@ -655,6 +661,9 @@ struct sock {
20 #if defined(CONFIG_SPX) || defined (CONFIG_SPX_MODULE)
21 struct spx_opt af_spx;
22 #endif /* CONFIG_SPX */
23 +#if 1
24 + struct udp_opt af_udp;
25 +#endif
26
27 } tp_pinfo;
28
29 --- a/net/Config.in
30 +++ b/net/Config.in
31 @@ -104,4 +104,6 @@ comment 'Network testing'
32 dep_tristate 'Packet Generator (USE WITH CAUTION)' CONFIG_NET_PKTGEN $CONFIG_PROC_FS
33 endmenu
34
35 +bool 'IPSEC NAT-Traversal' CONFIG_IPSEC_NAT_TRAVERSAL
36 +
37 endmenu
38 --- a/net/ipv4/udp.c
39 +++ b/net/ipv4/udp.c
40 @@ -860,6 +860,9 @@ static void udp_close(struct sock *sk, l
41
42 static int udp_queue_rcv_skb(struct sock * sk, struct sk_buff *skb)
43 {
44 +#ifdef CONFIG_IPSEC_NAT_TRAVERSAL
45 + struct udp_opt *tp = &(sk->tp_pinfo.af_udp);
46 +#endif
47 /*
48 * Charge it to the socket, dropping if the queue is full.
49 */
50 @@ -877,6 +880,40 @@ static int udp_queue_rcv_skb(struct sock
51 }
52 #endif
53
54 +#ifdef CONFIG_IPSEC_NAT_TRAVERSAL
55 + if (tp->esp_in_udp) {
56 + /*
57 + * Set skb->sk and xmit packet to ipsec_rcv.
58 + *
59 + * If ret != 0, ipsec_rcv refused the packet (not ESPinUDP),
60 + * restore skb->sk and fall back to sock_queue_rcv_skb
61 + */
62 + struct inet_protocol *esp = NULL;
63 +
64 +#if defined(CONFIG_KLIPS) && !defined(CONFIG_KLIPS_MODULE)
65 + /* optomize only when we know it is statically linked */
66 + extern struct inet_protocol esp_protocol;
67 + esp = &esp_protocol;
68 +#else
69 + for (esp = (struct inet_protocol *)inet_protos[IPPROTO_ESP & (MAX_INET_PROTOS - 1)];
70 + (esp) && (esp->protocol != IPPROTO_ESP);
71 + esp = esp->next);
72 +#endif
73 +
74 + if (esp && esp->handler) {
75 + struct sock *sav_sk = skb->sk;
76 + skb->sk = sk;
77 + if (esp->handler(skb) == 0) {
78 + skb->sk = sav_sk;
79 + /*not sure we might count ESPinUDP as UDP...*/
80 + UDP_INC_STATS_BH(UdpInDatagrams);
81 + return 0;
82 + }
83 + skb->sk = sav_sk;
84 + }
85 + }
86 +#endif
87 +
88 if (sock_queue_rcv_skb(sk,skb)<0) {
89 UDP_INC_STATS_BH(UdpInErrors);
90 IP_INC_STATS_BH(IpInDiscards);
91 @@ -1100,13 +1137,49 @@ out:
92 return len;
93 }
94
95 +static int udp_setsockopt(struct sock *sk, int level, int optname,
96 + char *optval, int optlen)
97 +{
98 + struct udp_opt *tp = &(sk->tp_pinfo.af_udp);
99 + int val;
100 + int err = 0;
101 +
102 + if (level != SOL_UDP)
103 + return ip_setsockopt(sk, level, optname, optval, optlen);
104 +
105 + if(optlen<sizeof(int))
106 + return -EINVAL;
107 +
108 + if (get_user(val, (int *)optval))
109 + return -EFAULT;
110 +
111 + lock_sock(sk);
112 +
113 + switch(optname) {
114 +#ifdef CONFIG_IPSEC_NAT_TRAVERSAL
115 +#ifndef UDP_ESPINUDP
116 +#define UDP_ESPINUDP 100
117 +#endif
118 + case UDP_ESPINUDP:
119 + tp->esp_in_udp = val;
120 + break;
121 +#endif
122 + default:
123 + err = -ENOPROTOOPT;
124 + break;
125 + }
126 +
127 + release_sock(sk);
128 + return err;
129 +}
130 +
131 struct proto udp_prot = {
132 name: "UDP",
133 close: udp_close,
134 connect: udp_connect,
135 disconnect: udp_disconnect,
136 ioctl: udp_ioctl,
137 - setsockopt: ip_setsockopt,
138 + setsockopt: udp_setsockopt,
139 getsockopt: ip_getsockopt,
140 sendmsg: udp_sendmsg,
141 recvmsg: udp_recvmsg,
This page took 0.051853 seconds and 5 git commands to generate.