2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
9 #include <linux/init.h>
10 #include <linux/kernel.h>
11 #include <linux/string.h>
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/physmap.h>
16 #include <linux/ssb/ssb.h>
17 #include <asm/addrspace.h>
18 #include <bcm63xx_board.h>
19 #include <bcm63xx_cpu.h>
20 #include <bcm63xx_regs.h>
21 #include <bcm63xx_io.h>
22 #include <bcm63xx_board.h>
23 #include <bcm63xx_dev_pci.h>
24 #include <bcm63xx_dev_uart.h>
25 #include <bcm63xx_dev_wdt.h>
26 #include <bcm63xx_dev_enet.h>
27 #include <bcm63xx_dev_pcmcia.h>
28 #include <bcm63xx_dev_usb_ohci.h>
29 #include <bcm63xx_dev_usb_ehci.h>
30 #include <board_bcm963xx.h>
32 #define PFX "board_bcm963xx: "
34 static struct bcm963xx_nvram nvram
;
35 static unsigned int mac_addr_used
= 0;
36 static struct board_info board
;
42 #ifdef CONFIG_BCM63XX_CPU_6338
43 static struct board_info __initdata board_96338gw
= {
45 .expected_cpu_id
= 0x6338,
50 .use_internal_phy
= 1,
60 #ifdef CONFIG_BCM63XX_CPU_6348
61 static struct board_info __initdata board_96348r
= {
63 .expected_cpu_id
= 0x6348,
70 .use_internal_phy
= 1,
74 static struct board_info __initdata board_96348gw_10
= {
76 .expected_cpu_id
= 0x6348,
84 .use_internal_phy
= 1,
88 .force_duplex_full
= 1,
96 static struct board_info __initdata board_96348gw_11
= {
98 .expected_cpu_id
= 0x6348,
106 .use_internal_phy
= 1,
110 .force_speed_100
= 1,
111 .force_duplex_full
= 1,
120 static struct board_info __initdata board_96348gw
= {
122 .expected_cpu_id
= 0x6348,
130 .use_internal_phy
= 1,
133 .force_speed_100
= 1,
134 .force_duplex_full
= 1,
140 static struct board_info __initdata board_FAST2404
= {
142 .expected_cpu_id
= 0x6348,
150 .use_internal_phy
= 1,
154 .force_speed_100
= 1,
155 .force_duplex_full
= 1,
164 static struct board_info __initdata board_DV201AMR
= {
166 .expected_cpu_id
= 0x6348,
174 .use_internal_phy
= 1,
178 .force_speed_100
= 1,
179 .force_duplex_full
= 1,
188 static struct board_info __initdata board_96348gw_a
= {
190 .expected_cpu_id
= 0x6348,
198 .use_internal_phy
= 1,
201 .force_speed_100
= 1,
202 .force_duplex_full
= 1,
214 #ifdef CONFIG_BCM63XX_CPU_6358
215 static struct board_info __initdata board_96358vw
= {
217 .expected_cpu_id
= 0x6358,
225 .use_internal_phy
= 1,
229 .force_speed_100
= 1,
230 .force_duplex_full
= 1,
239 static struct board_info __initdata board_96358vw2
= {
241 .expected_cpu_id
= 0x6358,
249 .use_internal_phy
= 1,
253 .force_speed_100
= 1,
254 .force_duplex_full
= 1,
267 static const struct board_info __initdata
*bcm963xx_boards
[] = {
268 #ifdef CONFIG_BCM63XX_CPU_6338
271 #ifdef CONFIG_BCM63XX_CPU_6348
281 #ifdef CONFIG_BCM63XX_CPU_6358
288 * early init callback, read nvram data from flash and checksum it
290 void __init
board_prom_init(void)
292 unsigned int check_len
, i
;
293 u8
*boot_addr
, *cfe
, *p
;
294 char cfe_version
[32];
297 /* read base address of boot chip select (0) */
298 val
= bcm_mpi_readl(MPI_CSBASE_REG(0));
299 val
&= MPI_CSBASE_BASE_MASK
;
300 boot_addr
= (u8
*)KSEG1ADDR(val
);
302 /* dump cfe version */
303 cfe
= boot_addr
+ BCM963XX_CFE_VERSION_OFFSET
;
304 if (!memcmp(cfe
, "cfe-v", 5))
305 snprintf(cfe_version
, sizeof(cfe_version
), "%u.%u.%u-%u.%u",
306 cfe
[5], cfe
[6], cfe
[7], cfe
[8], cfe
[9]);
308 strcpy(cfe_version
, "unknown");
309 printk(KERN_INFO PFX
"CFE version: %s\n", cfe_version
);
311 /* extract nvram data */
312 memcpy(&nvram
, boot_addr
+ BCM963XX_NVRAM_OFFSET
, sizeof(nvram
));
314 /* check checksum before using data */
315 if (nvram
.version
<= 4)
316 check_len
= offsetof(struct bcm963xx_nvram
, checksum_old
);
318 check_len
= sizeof(nvram
);
324 printk(KERN_ERR PFX
"invalid nvram checksum\n");
328 /* find board by name */
329 for (i
= 0; i
< ARRAY_SIZE(bcm963xx_boards
); i
++) {
330 if (strncmp(nvram
.name
, bcm963xx_boards
[i
]->name
,
333 /* copy, board desc array is marked initdata */
334 memcpy(&board
, bcm963xx_boards
[i
], sizeof(board
));
338 /* bail out if board is not found, will complain later */
339 if (!board
.name
[0]) {
341 memcpy(name
, nvram
.name
, 16);
343 printk(KERN_ERR PFX
"unknown bcm963xx board: %s\n",
348 /* setup pin multiplexing depending on board enabled device,
349 * this has to be done this early since PCI init is done
350 * inside arch_initcall */
354 bcm63xx_pci_enabled
= 1;
355 if (BCMCPU_IS_6348())
356 val
|= GPIO_MODE_6348_G2_PCI
;
359 if (board
.has_pccard
) {
360 if (BCMCPU_IS_6348())
361 val
|= GPIO_MODE_6348_G1_MII_PCCARD
;
364 if (board
.has_enet0
&& !board
.enet0
.use_internal_phy
) {
365 if (BCMCPU_IS_6348())
366 val
|= GPIO_MODE_6348_G3_EXT_MII
|
367 GPIO_MODE_6348_G0_EXT_MII
;
370 if (board
.has_enet1
&& !board
.enet1
.use_internal_phy
) {
371 if (BCMCPU_IS_6348())
372 val
|= GPIO_MODE_6348_G3_EXT_MII
|
373 GPIO_MODE_6348_G0_EXT_MII
;
376 bcm_gpio_writel(val
, GPIO_MODE_REG
);
380 * second stage init callback, good time to panic if we couldn't
381 * identify on which board we're running since early printk is working
383 void __init
board_setup(void)
386 panic("unable to detect bcm963xx board");
387 printk(KERN_INFO PFX
"board name: %s\n", board
.name
);
389 /* make sure we're running on expected cpu */
390 if (bcm63xx_get_cpu_id() != board
.expected_cpu_id
)
391 panic("unexpected CPU for bcm963xx board");
395 * return board name for /proc/cpuinfo
397 const char *board_get_name(void)
403 * register & return a new board mac address
405 static int board_get_mac_address(u8
*mac
)
410 if (mac_addr_used
>= nvram
.mac_addr_count
) {
411 printk(KERN_ERR PFX
"not enough mac address\n");
415 memcpy(mac
, nvram
.mac_addr_base
, ETH_ALEN
);
416 p
= mac
+ ETH_ALEN
- 1;
417 count
= mac_addr_used
;
429 printk(KERN_ERR PFX
"unable to fetch mac address\n");
437 static struct resource mtd_resources
[] = {
439 .start
= 0, /* filled at runtime */
440 .end
= 0, /* filled at runtime */
441 .flags
= IORESOURCE_MEM
,
445 static struct platform_device mtd_dev
= {
446 .name
= "bcm963xx-flash",
447 .resource
= mtd_resources
,
448 .num_resources
= ARRAY_SIZE(mtd_resources
),
452 * Register a sane SPROMv2 to make the on-board
455 static struct ssb_sprom bcm63xx_sprom
= {
459 .ant_available_bg
= 0x3,
472 .boardflags_lo
= 0x2848,
473 .boardflags_hi
= 0x0000,
477 * third stage init callback, register all board devices.
479 int __init
board_register_devices(void)
483 bcm63xx_uart_register();
484 bcm63xx_wdt_register();
486 if (board
.has_pccard
)
487 bcm63xx_pcmcia_register();
489 if (board
.has_enet0
&&
490 !board_get_mac_address(board
.enet0
.mac_addr
))
491 bcm63xx_enet_register(0, &board
.enet0
);
493 if (board
.has_enet1
&&
494 !board_get_mac_address(board
.enet1
.mac_addr
))
495 bcm63xx_enet_register(1, &board
.enet1
);
498 bcm63xx_ohci_register();
501 bcm63xx_ehci_register();
503 /* Generate MAC address for WLAN and
504 * register our SPROM */
505 if (!board_get_mac_address(bcm63xx_sprom
.il0mac
)) {
506 memcpy(bcm63xx_sprom
.et0mac
, bcm63xx_sprom
.il0mac
, ETH_ALEN
);
507 memcpy(bcm63xx_sprom
.et1mac
, bcm63xx_sprom
.il0mac
, ETH_ALEN
);
508 if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom
) < 0)
509 printk(KERN_ERR
"failed to register fallback SPROM\n");
512 /* read base address of boot chip select (0) */
513 val
= bcm_mpi_readl(MPI_CSBASE_REG(0));
514 val
&= MPI_CSBASE_BASE_MASK
;
515 mtd_resources
[0].start
= val
;
516 mtd_resources
[0].end
= 0x1FFFFFFF;
518 platform_device_register(&mtd_dev
);