2 * HCD driver for ADM5120 SoC
4 * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
6 * Based on the ADMtek 2.4 driver
7 * (C) Copyright 2003 Junius Chen <juniusc@admtek.com.tw>
8 * Which again was based on the ohci and uhci drivers.
11 #include <linux/module.h>
12 #include <linux/delay.h>
13 #include <linux/debugfs.h>
14 #include <linux/seq_file.h>
15 #include <linux/errno.h>
16 #include <linux/init.h>
17 #include <linux/list.h>
18 #include <linux/usb.h>
19 #include <linux/platform_device.h>
21 #include <asm/bootinfo.h>
24 #include <asm/system.h>
25 #include <asm/byteorder.h>
26 #include <asm/mach-adm5120/adm5120_info.h>
28 #include "../core/hcd.h"
30 MODULE_DESCRIPTION("ADM5120 USB Host Controller Driver");
31 MODULE_LICENSE("GPL");
32 MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
34 #define PFX "adm5120-hcd: "
36 #define ADMHCD_REG_CONTROL 0x00
37 #define ADMHCD_REG_INTSTATUS 0x04
38 #define ADMHCD_REG_INTENABLE 0x08
39 #define ADMHCD_REG_HOSTCONTROL 0x10
40 #define ADMHCD_REG_FMINTERVAL 0x18
41 #define ADMHCD_REG_FMNUMBER 0x1c
42 #define ADMHCD_REG_LSTHRESH 0x70
43 #define ADMHCD_REG_RHDESCR 0x74
44 #define ADMHCD_REG_PORTSTATUS0 0x78
45 #define ADMHCD_REG_PORTSTATUS1 0x7c
46 #define ADMHCD_REG_HOSTHEAD 0x80
49 #define ADMHCD_NUMPORTS 2
51 #define ADMHCD_HOST_EN 0x00000001 /* Host enable */
52 #define ADMHCD_SW_INTREQ 0x00000002 /* request software int */
53 #define ADMHCD_SW_RESET 0x00000008 /* Reset */
55 #define ADMHCD_INT_TD 0x00100000 /* TD completed */
56 #define ADMHCD_INT_SW 0x20000000 /* software interrupt */
57 #define ADMHCD_INT_FATAL 0x40000000 /* Fatal interrupt */
58 #define ADMHCD_INT_ACT 0x80000000 /* Interrupt active */
60 #define ADMHCD_STATE_RST 0x00000000 /* bus state reset */
61 #define ADMHCD_STATE_RES 0x00000001 /* bus state resume */
62 #define ADMHCD_STATE_OP 0x00000002 /* bus state operational */
63 #define ADMHCD_STATE_SUS 0x00000003 /* bus state suspended */
64 #define ADMHCD_DMA_EN 0x00000004 /* enable dma engine */
66 #define ADMHCD_RST_ST 0x00 /* USB reset state */
67 #define ADMHCD_RSM_ST 0x01 /* USB resume state */
68 #define ADMHCD_OPR_ST 0x10 /* USB operational state */
69 #define ADMHCD_SUS_ST 0x11 /* USB suspend state */
71 #define ADMHCD_NPS 0x00000200 /* No Power Switch */
72 #define ADMHCD_PSM 0x00000100 /* Power switch mode */
73 #define ADMHCD_OPCM 0x00000400 /* Over current protect mode */
74 #define ADMHCD_NOCP 0x00000800 /* No over current protect mode */
75 #define ADMHCD_LPSC 0x04000000 /* Local power switch change */
76 #define ADMHCD_LPS 0x01000000 /* Local power switch/global power switch */
78 #define ADMHCD_CCS 0x00000001 /* current connect status */
79 #define ADMHCD_PES 0x00000002 /* port enable status */
80 #define ADMHCD_PSS 0x00000004 /* port suspend status */
81 #define ADMHCD_POCI 0x00000008 /* port overcurrent indicator */
82 #define ADMHCD_PRS 0x00000010 /* port reset status */
83 #define ADMHCD_PPS 0x00000100 /* port power status */
84 #define ADMHCD_LSDA 0x00000200 /* low speed device attached */
85 #define ADMHCD_CSC 0x00010000 /* connect status change */
86 #define ADMHCD_PESC 0x00020000 /* enable status change */
87 #define ADMHCD_PSSC 0x00040000 /* suspend status change */
88 #define ADMHCD_OCIC 0x00080000 /* overcurrent change*/
89 #define ADMHCD_PRSC 0x00100000 /* reset status change */
93 /* Don't change first four, they used for DMA */
95 struct admhcd_td
*tail
;
96 struct admhcd_td
*head
;
97 struct admhcd_ed
*next
;
98 /* the rest is for the driver only: */
99 struct admhcd_td
*cur
;
100 struct usb_host_endpoint
*ep
;
102 struct admhcd_ed
*real
;
103 } __attribute__ ((packed
));
105 #define ADMHCD_ED_EPSHIFT 7 /* Shift for endpoint number */
106 #define ADMHCD_ED_INT 0x00000800 /* Is this an int endpoint */
107 #define ADMHCD_ED_SPEED 0x00002000 /* Is it a high speed dev? */
108 #define ADMHCD_ED_SKIP 0x00004000 /* Skip this ED */
109 #define ADMHCD_ED_FORMAT 0x00008000 /* Is this an isoc endpoint */
110 #define ADMHCD_ED_MAXSHIFT 16 /* Shift for max packet size */
113 /* Don't change first four, they are used for DMA */
117 struct admhcd_td
*next
;
118 /* the rest is for the driver only: */
120 struct admhcd_td
*real
;
121 } __attribute__ ((packed
));
123 #define ADMHCD_TD_OWN 0x80000000
124 #define ADMHCD_TD_TOGGLE 0x00000000
125 #define ADMHCD_TD_DATA0 0x01000000
126 #define ADMHCD_TD_DATA1 0x01800000
127 #define ADMHCD_TD_OUT 0x00200000
128 #define ADMHCD_TD_IN 0x00400000
129 #define ADMHCD_TD_SETUP 0x00000000
130 #define ADMHCD_TD_ISO 0x00010000
131 #define ADMHCD_TD_R 0x00040000
132 #define ADMHCD_TD_INTEN 0x00010000
134 static int admhcd_td_err
[16] = {
136 -EREMOTEIO
, /* CRC */
137 -EREMOTEIO
, /* bit stuff */
138 -EREMOTEIO
, /* data toggle */
140 -ETIMEDOUT
, /* timeout */
141 -EPROTO
, /* pid err */
142 -EPROTO
, /* unexpected pid */
143 -EREMOTEIO
, /* data overrun */
144 -EREMOTEIO
, /* data underrun */
145 -ETIMEDOUT
, /* 1010 */
146 -ETIMEDOUT
, /* 1011 */
147 -EREMOTEIO
, /* buffer overrun */
148 -EREMOTEIO
, /* buffer underrun */
149 -ETIMEDOUT
, /* 1110 */
150 -ETIMEDOUT
, /* 1111 */
153 #define ADMHCD_TD_ERRMASK 0x38000000
154 #define ADMHCD_TD_ERRSHIFT 27
156 #define TD(td) ((struct admhcd_td *)(((u32)(td)) & ~0xf))
157 #define ED(ed) ((struct admhcd_ed *)(((u32)(ed)) & ~0xf))
162 void __iomem
*data_reg
;
163 /* Root hub registers */
169 /* async schedule: control, bulk */
170 struct list_head async
;
177 static inline struct admhcd
*hcd_to_admhcd(struct usb_hcd
*hcd
)
179 return (struct admhcd
*)(hcd
->hcd_priv
);
182 static inline struct usb_hcd
*admhcd_to_hcd(struct admhcd
*admhcd
)
184 return container_of((void *)admhcd
, struct usb_hcd
, hcd_priv
);
187 static char hcd_name
[] = "adm5120-hcd";
189 static u32
admhcd_reg_get(struct admhcd
*ahcd
, int reg
)
191 return *(volatile u32
*)KSEG1ADDR(ahcd
->base
+reg
);
194 static void admhcd_reg_set(struct admhcd
*ahcd
, int reg
, u32 val
)
196 *(volatile u32
*)KSEG1ADDR(ahcd
->base
+reg
) = val
;
199 static void admhcd_lock(struct admhcd
*ahcd
)
201 spin_lock_irqsave(&ahcd
->lock
, ahcd
->flags
);
202 ahcd
->dma_en
= admhcd_reg_get(ahcd
, ADMHCD_REG_HOSTCONTROL
) &
204 admhcd_reg_set(ahcd
, ADMHCD_REG_HOSTCONTROL
, ADMHCD_STATE_OP
);
207 static void admhcd_unlock(struct admhcd
*ahcd
)
209 admhcd_reg_set(ahcd
, ADMHCD_REG_HOSTCONTROL
,
210 ADMHCD_STATE_OP
| ahcd
->dma_en
);
211 spin_unlock_irqrestore(&ahcd
->lock
, ahcd
->flags
);
214 static struct admhcd_td
*admhcd_td_alloc(struct admhcd_ed
*ed
, struct urb
*urb
)
216 struct admhcd_td
*tdn
, *td
;
218 tdn
= kmalloc(sizeof(struct admhcd_td
), GFP_ATOMIC
);
222 tdn
= (struct admhcd_td
*)KSEG1ADDR(tdn
);
223 memset(tdn
, 0, sizeof(struct admhcd_td
));
224 if (ed
->cur
== NULL
) {
230 /* Supply back the old tail and link in new td as tail */
232 TD(ed
->tail
)->next
= tdn
;
240 static void admhcd_td_free(struct admhcd_ed
*ed
, struct urb
*urb
)
242 struct admhcd_td
*td
, **tdp
;
245 ed
->control
|= ADMHCD_ED_SKIP
;
254 while (td
&& td
->urb
== urb
) {
261 /* Find an endpoint's descriptor, if needed allocate a new one and link it
264 static struct admhcd_ed
*admhcd_get_ed(struct admhcd
*ahcd
,
265 struct usb_host_endpoint
*ep
, struct urb
*urb
)
267 struct admhcd_ed
*hosthead
;
268 struct admhcd_ed
*found
= NULL
, *ed
= NULL
;
269 unsigned int pipe
= urb
->pipe
;
272 hosthead
= (struct admhcd_ed
*)admhcd_reg_get(ahcd
, ADMHCD_REG_HOSTHEAD
);
274 for (ed
= hosthead
;; ed
= ED(ed
->next
)) {
279 if (ED(ed
->next
) == hosthead
)
284 found
= kmalloc(sizeof(struct admhcd_ed
), GFP_ATOMIC
);
287 memset(found
, 0, sizeof(struct admhcd_ed
));
290 found
= (struct admhcd_ed
*)KSEG1ADDR(found
);
291 found
->control
= usb_pipedevice(pipe
) |
292 (usb_pipeendpoint(pipe
) << ADMHCD_ED_EPSHIFT
) |
293 (usb_pipeint(pipe
) ? ADMHCD_ED_INT
: 0) |
294 (urb
->dev
->speed
== USB_SPEED_FULL
? ADMHCD_ED_SPEED
: 0) |
295 (usb_pipeisoc(pipe
) ? ADMHCD_ED_FORMAT
: 0) |
296 (usb_maxpacket(urb
->dev
, pipe
, usb_pipeout(pipe
)) << ADMHCD_ED_MAXSHIFT
);
297 /* Alloc first dummy td */
298 admhcd_td_alloc(found
, NULL
);
300 found
->next
= hosthead
;
304 admhcd_reg_set(ahcd
, ADMHCD_REG_HOSTHEAD
, (u32
)found
);
312 static struct admhcd_td
*admhcd_td_fill(u32 control
, struct admhcd_td
*td
,
313 dma_addr_t data
, int len
)
317 td
->control
= control
;
321 static void admhcd_ed_start(struct admhcd
*ahcd
, struct admhcd_ed
*ed
)
323 struct admhcd_td
*td
= ed
->cur
;
330 td
->control
|= ADMHCD_TD_OWN
;
331 if (TD(td
->next
)->urb
!= td
->urb
) {
332 td
->buflen
|= ADMHCD_TD_INTEN
;
338 ed
->head
= TD(ed
->head
);
339 ahcd
->dma_en
|= ADMHCD_DMA_EN
;
342 static irqreturn_t
adm5120hcd_irq(struct usb_hcd
*hcd
)
344 struct admhcd
*ahcd
= hcd_to_admhcd(hcd
);
347 intstatus
= admhcd_reg_get(ahcd
, ADMHCD_REG_INTSTATUS
);
348 if (intstatus
& ADMHCD_INT_FATAL
) {
349 admhcd_reg_set(ahcd
, ADMHCD_REG_INTSTATUS
, ADMHCD_INT_FATAL
);
352 if (intstatus
& ADMHCD_INT_SW
) {
353 admhcd_reg_set(ahcd
, ADMHCD_REG_INTSTATUS
, ADMHCD_INT_SW
);
356 if (intstatus
& ADMHCD_INT_TD
) {
357 struct admhcd_ed
*ed
, *head
;
359 admhcd_reg_set(ahcd
, ADMHCD_REG_INTSTATUS
, ADMHCD_INT_TD
);
361 head
= (struct admhcd_ed
*)admhcd_reg_get(ahcd
, ADMHCD_REG_HOSTHEAD
);
364 /* Is it a finished TD? */
365 if (ed
->urb
&& !(ed
->cur
->control
& ADMHCD_TD_OWN
)) {
366 struct admhcd_td
*td
;
370 error
= (td
->control
& ADMHCD_TD_ERRMASK
) >>
372 ed
->urb
->status
= admhcd_td_err
[error
];
373 admhcd_td_free(ed
, ed
->urb
);
374 // Calculate real length!!!
375 ed
->urb
->actual_length
= ed
->urb
->transfer_buffer_length
;
376 ed
->urb
->hcpriv
= NULL
;
377 usb_hcd_giveback_urb(hcd
, ed
->urb
);
380 admhcd_ed_start(ahcd
, ed
);
382 } while (ed
!= head
);
388 static int admhcd_urb_enqueue(struct usb_hcd
*hcd
, struct usb_host_endpoint
*ep
,
389 struct urb
*urb
, gfp_t mem_flags
)
391 struct admhcd
*ahcd
= hcd_to_admhcd(hcd
);
392 struct admhcd_ed
*ed
;
393 struct admhcd_td
*td
;
394 int size
= 0, i
, zero
= 0, ret
= 0;
395 unsigned int pipe
= urb
->pipe
, toggle
= 0;
396 dma_addr_t data
= (dma_addr_t
)urb
->transfer_buffer
;
397 int data_len
= urb
->transfer_buffer_length
;
399 ed
= admhcd_get_ed(ahcd
, ep
, urb
);
403 switch(usb_pipetype(pipe
)) {
409 size
+= urb
->transfer_buffer_length
/ 4096;
410 if (urb
->transfer_buffer_length
% 4096)
414 else if (urb
->transfer_flags
& URB_ZERO_PACKET
&&
415 !(urb
->transfer_buffer_length
%
416 usb_maxpacket(urb
->dev
, pipe
, usb_pipeout(pipe
)))) {
421 case PIPE_ISOCHRONOUS
:
422 size
= urb
->number_of_packets
;
427 /* Remember the first td */
428 td
= admhcd_td_alloc(ed
, urb
);
433 /* Allocate additionall tds first */
434 for (i
= 1; i
< size
; i
++) {
435 if (admhcd_td_alloc(ed
, urb
) == NULL
) {
436 admhcd_td_free(ed
, urb
);
442 if (usb_gettoggle(urb
->dev
, usb_pipeendpoint(pipe
), usb_pipeout(pipe
)))
443 toggle
= ADMHCD_TD_TOGGLE
;
445 toggle
= ADMHCD_TD_DATA0
;
446 usb_settoggle(urb
->dev
, usb_pipeendpoint(pipe
),
447 usb_pipeout(pipe
), 1);
450 switch(usb_pipetype(pipe
)) {
452 td
= admhcd_td_fill(ADMHCD_TD_SETUP
| ADMHCD_TD_DATA0
,
453 td
, (dma_addr_t
)urb
->setup_packet
, 8);
454 while (data_len
> 0) {
455 td
= admhcd_td_fill(ADMHCD_TD_DATA1
458 ADMHCD_TD_OUT
: ADMHCD_TD_IN
), td
,
459 data
, data_len
% 4097);
462 admhcd_td_fill(ADMHCD_TD_DATA1
| (usb_pipeout(pipe
) ?
463 ADMHCD_TD_IN
: ADMHCD_TD_OUT
), td
,
468 //info ok for interrupt?
470 while(data_len
> 4096) {
471 td
= admhcd_td_fill((usb_pipeout(pipe
) ?
473 ADMHCD_TD_IN
| ADMHCD_TD_R
) |
474 (i
? ADMHCD_TD_TOGGLE
: toggle
), td
,
480 td
= admhcd_td_fill((usb_pipeout(pipe
) ?
481 ADMHCD_TD_OUT
: ADMHCD_TD_IN
) |
482 (i
? ADMHCD_TD_TOGGLE
: toggle
), td
, data
, data_len
);
485 admhcd_td_fill((usb_pipeout(pipe
) ?
486 ADMHCD_TD_OUT
: ADMHCD_TD_IN
) |
487 (i
? ADMHCD_TD_TOGGLE
: toggle
), td
, 0, 0);
489 case PIPE_ISOCHRONOUS
:
490 for (i
= 0; i
< urb
->number_of_packets
; i
++) {
491 td
= admhcd_td_fill(ADMHCD_TD_ISO
|
492 ((urb
->start_frame
+ i
) & 0xffff), td
,
493 data
+ urb
->iso_frame_desc
[i
].offset
,
494 urb
->iso_frame_desc
[i
].length
);
499 admhcd_ed_start(ahcd
, ed
);
505 static int admhcd_urb_dequeue(struct usb_hcd
*hcd
, struct urb
*urb
)
507 struct admhcd
*ahcd
= hcd_to_admhcd(hcd
);
508 struct admhcd_ed
*ed
;
513 if (ed
&& ed
->urb
!= urb
)
514 admhcd_td_free(ed
, urb
);
520 static void admhcd_endpoint_disable(struct usb_hcd
*hcd
, struct usb_host_endpoint
*ep
)
522 struct admhcd
*ahcd
= hcd_to_admhcd(hcd
);
523 struct admhcd_ed
*ed
, *edt
, *head
;
527 head
= (struct admhcd_ed
*)admhcd_reg_get(ahcd
, ADMHCD_REG_HOSTHEAD
);
530 for (ed
= head
; ED(ed
->next
) != head
; ed
= ED(ed
->next
))
536 admhcd_td_free(ed
, ed
->cur
->urb
);
538 if (ED(ed
->next
) == ed
) {
539 admhcd_reg_set(ahcd
, ADMHCD_REG_HOSTHEAD
, 0);
544 for (edt
= head
; ED(edt
->next
) != head
; edt
= ED(edt
->next
));
545 edt
->next
= ED(ed
->next
);
546 admhcd_reg_set(ahcd
, ADMHCD_REG_HOSTHEAD
, (u32
)ed
->next
);
549 for (edt
= head
; edt
->next
!= ed
; edt
= edt
->next
);
550 edt
->next
= ed
->next
;
557 static int admhcd_get_frame_number(struct usb_hcd
*hcd
)
559 struct admhcd
*ahcd
= hcd_to_admhcd(hcd
);
561 return admhcd_reg_get(ahcd
, ADMHCD_REG_FMNUMBER
) & 0x0000ffff;
564 static int admhcd_hub_status_data(struct usb_hcd
*hcd
, char *buf
)
566 struct admhcd
*ahcd
= hcd_to_admhcd(hcd
);
570 for (port
= 0; port
< ADMHCD_NUMPORTS
; port
++) {
571 if (admhcd_reg_get(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4) &
572 (ADMHCD_CSC
| ADMHCD_PESC
| ADMHCD_PSSC
| ADMHCD_OCIC
|
574 *buf
|= (1 << (port
+ 1));
579 static __u8 root_hub_hub_des
[] = {
580 0x09, /* __u8 bLength; */
581 0x29, /* __u8 bDescriptorType; Hub-descriptor */
582 0x02, /* __u8 bNbrPorts; */
583 0x0a, 0x00, /* __u16 wHubCharacteristics; */
584 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
585 0x00, /* __u8 bHubContrCurrent; 0mA */
586 0x00, /* __u8 DeviceRemovable; */
587 0xff, /* __u8 PortPwrCtrlMask; */
590 static int admhcd_hub_control(struct usb_hcd
*hcd
, u16 typeReq
, u16 wValue
,
591 u16 wIndex
, char *buf
, u16 wLength
)
593 struct admhcd
*ahcd
= hcd_to_admhcd(hcd
);
595 unsigned int port
= wIndex
-1;
600 *(__le32
*)buf
= cpu_to_le32(0);
603 if (port
>= ADMHCD_NUMPORTS
)
605 *(__le32
*)buf
= cpu_to_le32(
606 admhcd_reg_get(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4));
608 case SetHubFeature
: /* We don't implement these */
609 case ClearHubFeature
:
611 case C_HUB_OVER_CURRENT
:
612 case C_HUB_LOCAL_POWER
:
618 if (port
>= ADMHCD_NUMPORTS
)
622 case USB_PORT_FEAT_SUSPEND
:
623 admhcd_reg_set(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4,
626 case USB_PORT_FEAT_RESET
:
627 if (admhcd_reg_get(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4)
630 ADMHCD_REG_PORTSTATUS0
+ port
*4,
631 ADMHCD_PRS
| ADMHCD_CSC
);
634 ADMHCD_REG_PORTSTATUS0
+ port
*4,
635 ADMHCD_PES
| ADMHCD_CSC
);
638 case USB_PORT_FEAT_POWER
:
639 admhcd_reg_set(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4,
646 case ClearPortFeature
:
647 if (port
>= ADMHCD_NUMPORTS
)
651 case USB_PORT_FEAT_ENABLE
:
652 admhcd_reg_set(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4,
655 case USB_PORT_FEAT_C_ENABLE
:
656 admhcd_reg_set(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4,
659 case USB_PORT_FEAT_SUSPEND
:
660 admhcd_reg_set(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4,
663 case USB_PORT_FEAT_C_SUSPEND
:
664 admhcd_reg_set(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4,
666 case USB_PORT_FEAT_POWER
:
667 admhcd_reg_set(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4,
670 case USB_PORT_FEAT_C_CONNECTION
:
671 admhcd_reg_set(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4,
674 case USB_PORT_FEAT_C_OVER_CURRENT
:
675 admhcd_reg_set(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4,
678 case USB_PORT_FEAT_C_RESET
:
679 admhcd_reg_set(ahcd
, ADMHCD_REG_PORTSTATUS0
+ port
*4,
686 case GetHubDescriptor
:
687 len
= min_t(unsigned int, sizeof(root_hub_hub_des
), wLength
);
688 memcpy(buf
, root_hub_hub_des
, len
);
698 static int admhcd_start(struct usb_hcd
*hcd
)
700 struct admhcd
*ahcd
= hcd_to_admhcd(hcd
);
703 spin_lock_irqsave(&ahcd
->lock
, flags
);
705 /* Initialise the HCD registers */
706 admhcd_reg_set(ahcd
, ADMHCD_REG_INTENABLE
, 0);
709 admhcd_reg_set(ahcd
, ADMHCD_REG_CONTROL
, ADMHCD_SW_RESET
);
711 while (admhcd_reg_get(ahcd
, ADMHCD_REG_CONTROL
) & ADMHCD_SW_RESET
)
714 /* Enable USB host mode */
715 admhcd_reg_set(ahcd
, ADMHCD_REG_CONTROL
, ADMHCD_HOST_EN
);
717 /* Set host specific settings */
718 admhcd_reg_set(ahcd
, ADMHCD_REG_HOSTHEAD
, 0x00000000);
719 admhcd_reg_set(ahcd
, ADMHCD_REG_FMINTERVAL
, 0x20002edf);
720 admhcd_reg_set(ahcd
, ADMHCD_REG_LSTHRESH
, 0x628);
723 admhcd_reg_set(ahcd
, ADMHCD_REG_INTENABLE
,
724 ADMHCD_INT_ACT
| ADMHCD_INT_FATAL
| ADMHCD_INT_SW
| ADMHCD_INT_TD
);
725 admhcd_reg_set(ahcd
, ADMHCD_REG_INTSTATUS
,
726 ADMHCD_INT_ACT
| ADMHCD_INT_FATAL
| ADMHCD_INT_SW
| ADMHCD_INT_TD
);
728 admhcd_reg_set(ahcd
, ADMHCD_REG_RHDESCR
, ADMHCD_NPS
| ADMHCD_LPSC
);
729 admhcd_reg_set(ahcd
, ADMHCD_REG_HOSTCONTROL
, ADMHCD_STATE_OP
);
732 hcd
->state
= HC_STATE_RUNNING
;
734 spin_unlock_irqrestore(&ahcd
->lock
, flags
);
738 static int admhcd_sw_reset(struct admhcd
*ahcd
)
744 spin_lock_irqsave(&ahcd
->lock
, flags
);
746 admhcd_reg_set(ahcd
, ADMHCD_REG_INTENABLE
, 0);
749 admhcd_reg_set(ahcd
, ADMHCD_REG_CONTROL
, ADMHCD_SW_RESET
);
753 if (!(admhcd_reg_get(ahcd
, ADMHCD_REG_CONTROL
) & ADMHCD_SW_RESET
))
757 printk(KERN_WARNING
"%s Software reset timeout\n", hcd_name
);
760 spin_unlock_irqrestore(&ahcd
->lock
, flags
);
764 static int admhcd_reset(struct usb_hcd
*hcd
)
766 struct admhcd
*ahcd
= hcd_to_admhcd(hcd
);
768 int ret
, timeout
= 15; /* ms */
771 ret
= admhcd_sw_reset(ahcd
);
775 t
= jiffies
+ msecs_to_jiffies(timeout
);
776 while (time_before_eq(jiffies
, t
)) {
778 spin_lock_irq(&ahcd
->lock
);
779 val
= admhcd_reg_get(ahcd
, ADMHCD_REG_HOSTCONTROL
) & ADMHCD_OPR_ST
;
780 spin_unlock_irq(&ahcd
->lock
);
785 printk(KERN_WARNING
"Device not ready after %dms\n", timeout
);
791 static void admhcd_stop(struct usb_hcd
*hcd
)
793 struct admhcd
*ahcd
= hcd_to_admhcd(hcd
);
797 spin_lock_irqsave(&ahcd
->lock
, flags
);
798 admhcd_reg_set(ahcd
, ADMHCD_REG_INTENABLE
, 0);
800 /* Set global control of power for ports */
801 val
= admhcd_reg_get(ahcd
, ADMHCD_REG_RHDESCR
);
802 val
&= (~ADMHCD_PSM
| ADMHCD_LPS
);
803 admhcd_reg_set(ahcd
, ADMHCD_REG_RHDESCR
, val
);
805 spin_unlock_irqrestore(&ahcd
->lock
, flags
);
807 /* Ask for software reset */
808 admhcd_sw_reset(ahcd
);
812 static struct hc_driver adm5120_hc_driver
= {
813 .description
= hcd_name
,
814 .product_desc
= "ADM5120 HCD",
815 .hcd_priv_size
= sizeof(struct admhcd
),
816 .irq
= adm5120hcd_irq
,
817 .flags
= HCD_MEMORY
|HCD_USB11
,
818 .urb_enqueue
= admhcd_urb_enqueue
,
819 .urb_dequeue
= admhcd_urb_dequeue
,
820 .endpoint_disable
= admhcd_endpoint_disable
,
821 .get_frame_number
= admhcd_get_frame_number
,
822 .hub_status_data
= admhcd_hub_status_data
,
823 .hub_control
= admhcd_hub_control
,
824 .start
= admhcd_start
,
826 .reset
= admhcd_reset
,
829 #define resource_len(r) (((r)->end - (r)->start) + 1)
831 static int __init
adm5120hcd_probe(struct platform_device
*pdev
)
835 struct resource
*data
;
836 void __iomem
*data_reg
;
840 if (pdev
->num_resources
< 2) {
845 if (pdev
->dev
.dma_mask
) {
846 printk(KERN_DEBUG
"no we won't dma\n");
850 irq
= platform_get_irq(pdev
, 0);
851 data
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
853 if (!data
|| irq
< 0) {
858 if (!request_mem_region(data
->start
, 2, hcd_name
)) {
863 data_reg
= ioremap(data
->start
, resource_len(data
));
864 if (data_reg
== NULL
) {
869 hcd
= usb_create_hcd(&adm5120_hc_driver
, &pdev
->dev
, pdev
->dev
.bus_id
);
873 hcd
->rsrc_start
= data
->start
;
874 hcd
->rsrc_len
= resource_len(data
);
875 hcd
->regs
= (u32
)data_reg
;
876 ahcd
= hcd_to_admhcd(hcd
);
878 spin_lock_init(&ahcd
->lock
);
879 INIT_LIST_HEAD(&ahcd
->async
);
881 ahcd
->data_reg
= data_reg
;
882 ahcd
->base
= (u32
)data_reg
;
884 hcd
->product_desc
= "ADM5120 HCD";
886 err
= usb_add_hcd(hcd
, irq
, IRQF_DISABLED
);
897 release_mem_region(pdev
->resource
[0].start
, pdev
->resource
[0].end
- pdev
->resource
[0].start
+1);
902 static int __init_or_module
adm5120hcd_remove(struct platform_device
*pdev
)
904 struct usb_hcd
*hcd
= platform_get_drvdata(pdev
);
909 ahcd
= hcd_to_admhcd(hcd
);
916 static struct platform_driver adm5120hcd_driver
= {
917 .probe
= adm5120hcd_probe
,
918 .remove
= adm5120hcd_remove
,
920 .name
= "adm5120-usbc",
921 .owner
= THIS_MODULE
,
925 static int __init
adm5120hcd_init(void)
929 if (usb_disabled()) {
930 printk(KERN_DEBUG PFX
"USB support is disabled\n");
934 if (mips_machgroup
!= MACH_GROUP_ADM5120
) {
935 printk(KERN_DEBUG PFX
"unsupported machine group\n");
939 ret
= platform_driver_register(&adm5120hcd_driver
);
941 printk(KERN_INFO PFX
"registered\n");
946 static void __exit
adm5120hcd_exit(void)
948 platform_driver_unregister(&adm5120hcd_driver
);
951 module_init(adm5120hcd_init
);
952 module_exit(adm5120hcd_exit
);