target/linux/generic-2.6/files-2.6.26/drivers/net/phy/adm6996.h

   1 /*
   2  * ADM6996 switch driver
   3  *
   4  * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of the GNU General Public License v2 as published by the
   8  * Free Software Foundation
   9  */
  10 #ifndef __ADM6996_H
  11 #define __ADM6996_H
  12
  13 #define ADM_PHY_PORTS   5
  14 #define ADM_CPU_PORT    5
  15 #define ADM_WAN_PORT    0 /* FIXME: dynamic ? */
  16
  17 enum admreg {
  18         ADM_EEPROM_BASE         = 0x0,
  19                 ADM_P0_CFG              = ADM_EEPROM_BASE + 1,
  20                 ADM_P1_CFG              = ADM_EEPROM_BASE + 3,
  21                 ADM_P2_CFG              = ADM_EEPROM_BASE + 5,
  22                 ADM_P3_CFG              = ADM_EEPROM_BASE + 7,
  23                 ADM_P4_CFG              = ADM_EEPROM_BASE + 8,
  24                 ADM_P5_CFG              = ADM_EEPROM_BASE + 9,
  25         ADM_EEPROM_EXT_BASE     = 0x40,
  26         ADM_COUNTER_BASE        = 0xa0,
  27                 ADM_SIG0                = ADM_COUNTER_BASE + 0,
  28                 ADM_SIG1                = ADM_COUNTER_BASE + 1,
  29         ADM_PHY_BASE            = 0x200,
  30 #define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n))
  31 };
  32
  33 /* Chip identification patterns */
  34 #define ADM_SIG0_MASK   0xfff0
  35 #define ADM_SIG0_VAL    0x1020
  36 #define ADM_SIG1_MASK   0xffff
  37 #define ADM_SIG1_VAL    0x0007
  38
  39 enum {
  40         ADM_PHYCFG_COLTST     = (1 << 7),       /* Enable collision test */
  41         ADM_PHYCFG_DPLX       = (1 << 8),       /* Enable full duplex */
  42         ADM_PHYCFG_ANEN_RST   = (1 << 9),       /* Restart auto negotiation (self clear) */
  43         ADM_PHYCFG_ISO        = (1 << 10),      /* Isolate PHY */
  44         ADM_PHYCFG_PDN        = (1 << 11),      /* Power down PHY */
  45         ADM_PHYCFG_ANEN       = (1 << 12),      /* Enable auto negotiation */
  46         ADM_PHYCFG_SPEED_100  = (1 << 13),      /* Enable 100 Mbit/s */
  47         ADM_PHYCFG_LPBK       = (1 << 14),      /* Enable loopback operation */
  48         ADM_PHYCFG_RST        = (1 << 15),      /* Reset the port (self clear) */
  49         ADM_PHYCFG_INIT = (
  50                 ADM_PHYCFG_RST |
  51                 ADM_PHYCFG_SPEED_100 |
  52                 ADM_PHYCFG_ANEN |
  53                 ADM_PHYCFG_ANEN_RST
  54         )
  55 };
  56
  57 enum {
  58         ADM_PORTCFG_FC        = (1 << 0),       /* Enable 802.x flow control */
  59         ADM_PORTCFG_AN        = (1 << 1),       /* Enable auto-negotiation */
  60         ADM_PORTCFG_SPEED_100 = (1 << 2),       /* Enable 100 Mbit/s */
  61         ADM_PORTCFG_DPLX      = (1 << 3),       /* Enable full duplex */
  62         ADM_PORTCFG_OT        = (1 << 4),       /* Output tagged packets */
  63         ADM_PORTCFG_PD        = (1 << 5),       /* Port disable */
  64         ADM_PORTCFG_TV_PRIO   = (1 << 6),       /* 0 = VLAN based priority
  65                                                  * 1 = TOS based priority */
  66         ADM_PORTCFG_PPE       = (1 << 7),       /* Port based priority enable */
  67         ADM_PORTCFG_PP_S      = (1 << 8),       /* Port based priority, 2 bits */
  68         ADM_PORTCFG_PVID_BASE = (1 << 10),      /* Primary VLAN id, 4 bits */
  69         ADM_PORTCFG_FSE       = (1 << 14),      /* Fx select enable */
  70         ADM_PORTCFG_CAM       = (1 << 15),      /* Crossover Auto MDIX */
  71
  72         ADM_PORTCFG_INIT = (
  73                 ADM_PORTCFG_FC |
  74                 ADM_PORTCFG_AN |
  75                 ADM_PORTCFG_SPEED_100 |
  76                 ADM_PORTCFG_DPLX |
  77                 ADM_PORTCFG_CAM
  78         ),
  79         ADM_PORTCFG_CPU = (
  80                 ADM_PORTCFG_FC |
  81                 ADM_PORTCFG_SPEED_100 |
  82                 ADM_PORTCFG_OT |
  83                 ADM_PORTCFG_DPLX
  84         ),
  85 };
  86
  87 #define ADM_PORTCFG_PPID(N) ((n & 0x3) << 8)
  88 #define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10)
  89
  90 static const u8 adm_portcfg[] = {
  91         [0] = ADM_P0_CFG,
  92         [1] = ADM_P1_CFG,
  93         [2] = ADM_P2_CFG,
  94         [3] = ADM_P3_CFG,
  95         [4] = ADM_P4_CFG,
  96         [5] = ADM_P5_CFG,
  97 };
  98
  99 /*
 100  * Split the register address in phy id and register
 101  * it will get combined again by the mdio bus op
 102  */
 103 #define PHYADDR(_reg)   ((_reg >> 5) & 0xff), (_reg & 0x1f)
 104
 105 #endif