target/linux/brcm47xx/patches-2.6.35/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch

   1 From 09ebc2952d9d3df6b9c548d9943dc8bcffb87540 Mon Sep 17 00:00:00 2001
   2 From: Hauke Mehrtens <hauke@hauke-m.de>
   3 Date: Sun, 18 Jul 2010 14:59:24 +0200
   4 Subject: [PATCH 4/5] MIPS: BCM47xx: Setup and register serial early
   5
   6 Swap the first and second serial if console=ttyS1 was set.
   7 Set it up and register it for early serial support.
   8
   9 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  10 ---
  11  arch/mips/Kconfig         |    1 -
  12  arch/mips/bcm47xx/setup.c |   36 +++++++++++++++++++++++++++++++++++-
  13  2 files changed, 35 insertions(+), 2 deletions(-)
  14
  15 --- a/arch/mips/Kconfig
  16 +++ b/arch/mips/Kconfig
  17 @@ -65,7 +65,6 @@ config BCM47XX
  18         select SSB_B43_PCI_BRIDGE if PCI
  19         select SSB_PCICORE_HOSTMODE if PCI
  20         select GENERIC_GPIO
  21 -       select SYS_HAS_EARLY_PRINTK
  22         select CFE
  23         help
  24          Support for BCM47XX based boards
  25 --- a/arch/mips/bcm47xx/setup.c
  26 +++ b/arch/mips/bcm47xx/setup.c
  27 @@ -28,6 +28,8 @@
  28  #include <linux/types.h>
  29  #include <linux/ssb/ssb.h>
  30  #include <linux/ssb/ssb_embedded.h>
  31 +#include <linux/serial.h>
  32 +#include <linux/serial_8250.h>
  33  #include <asm/bootinfo.h>
  34  #include <asm/reboot.h>
  35  #include <asm/time.h>
  36 @@ -184,12 +186,44 @@ static int bcm47xx_get_invariants(struct
  37
  38  void __init plat_mem_setup(void)
  39  {
  40 -       int err;
  41 +       int i, err;
  42 +       char buf[100];
  43 +       struct ssb_mipscore *mcore;
  44
  45         err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
  46                                       bcm47xx_get_invariants);
  47         if (err)
  48                 panic("Failed to initialize SSB bus (err %d)\n", err);
  49 +       mcore = &ssb_bcm47xx.mipscore;
  50 +
  51 +       nvram_getenv("kernel_args", buf, sizeof(buf));
  52 +       if (!strncmp(buf, "console=ttyS1", 13)) {
  53 +               struct ssb_serial_port port;
  54 +
  55 +               printk("Swapping serial ports!\n");
  56 +               /* swap serial ports */
  57 +               memcpy(&port, &mcore->serial_ports[0], sizeof(port));
  58 +               memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
  59 +               memcpy(&mcore->serial_ports[1], &port, sizeof(port));
  60 +       }
  61 +
  62 +       for (i = 0; i < mcore->nr_serial_ports; i++) {
  63 +               struct ssb_serial_port *port = &(mcore->serial_ports[i]);
  64 +               struct uart_port s;
  65 +
  66 +               memset(&s, 0, sizeof(s));
  67 +               s.line = i;
  68 +               s.mapbase = (unsigned int) port->regs;
  69 +               s.membase = port->regs;
  70 +               s.irq = port->irq + 2;
  71 +               s.uartclk = port->baud_base;
  72 +               s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
  73 +               s.iotype = SERIAL_IO_MEM;
  74 +               s.regshift = port->reg_shift;
  75 +
  76 +               early_serial_setup(&s);
  77 +       }
  78 +       printk("Serial init done.\n");
  79
  80         _machine_restart = bcm47xx_machine_restart;
  81         _machine_halt = bcm47xx_machine_halt;